Help O2 Atmo

[amjad]

Dear All master,

I need help on my o2 Atom, when I upgrade it to latest version, it stop on stage 5: Burn in Radio Rom, 0%. Nothing happen even I had to wait for 1 hour.
I upgrade it with original atom rom from o2 site : 'Xda-Atom-ENG-20060426-MOT0822.exe'

The device stay in "O2" screen. this device can switch to diagnostic mode.

what should I do?
Note I repeated loading rom but Ietunai problem in Flash

[sliders7]

Probably the Radio Hardware broken.... try to install without the Radio ROM.

[waseemraj]

Probably the Radio Hardware broken.... try to install without the Radio ROM.

from wher i can find that rom ?
or can u upload it ? for me plzzzz

[medkid]

http://pdaviet.net/showthread.php?t=17158
you can find how to flash rom without bootloader, extended rom , radio.
read my first post

[waseemraj]

http://pdaviet.net/showthread.php?t=17158
you can find how to flash rom without bootloader, extended rom , radio.
read my first post

but my phone is dead and it fail when i try to unpgrade it and it gave this eorr ===
!!!Please use DSUU in OS mode and syno with PC first !!!
usb transfer fail.

what shoud i do now plzz help me i dont know how to get it in DSUU mode its gose on boot loader but cant get it in to DUSS MODE


my Xda Atom Exec o2

[sliders7]

but my phone is dead and it fail when i try to unpgrade it and it gave this eorr ===
!!!Please use DSUU in OS mode and syno with PC first !!!
usb transfer fail.

what shoud i do now plzz help me i dont know how to get it in DSUU mode its gose on boot loader but cant get it in to DUSS MODE


my Xda Atom Exec o2

u can't update using DSUU from activesync anymore. since u got broken ROM.

u must use Bootloader by pressing:
-power + camera + reset
-plug the USB
-start the update using DSUU.

[waseemraj]

u can't update using DSUU from activesync anymore. since u got broken ROM.

u must use Bootloader by pressing:
-power + camera + reset
-plug the USB
-start the update using DSUU.

i just do as u say but the but it fail gives the eorr as i told in my last post

and plzz tell me is i just have to get it in bootmode and conact it with usb and start updating
what is DSUU?? is this the file Xda-Atom-Exec-ENG-20060721-MOT0822 ? or what ?

[homer285]

Easy fix, check post #12 http://forum.xda-developers.com/showthread.php?t=319945&page=2&highlight=EBOOT
more than likely you will need a 256 or 512MB SD Card, the method discussed here (in most cases) will not work with higher capacity cards. Check the Atom Wiki too.

[waseemraj]

Easy fix, check post #12 http://forum.xda-developers.com/showthread.php?t=319945&page=2&highlight=EBOOT
more than likely you will need a 256 or 512MB SD Card, the method discussed here (in most cases) will not work with higher capacity cards. Check the Atom Wiki too.

i tryied that too but still same postion.....
what shoud i do now plzzz help me i tell u again what it look like
================================================== ==
USB connected,waiting for download ..............

!!!Please use DSUU in OS mode and syc with PC first!!!
Usb Transfer fail

[waseemraj]

some one plzzzz help me ? for my atom exec

[sliders7]

some one plzzzz help me ? for my atom exec

well...

after u see bootloader screen and waiting to download.
it should be ok to connect to USB and PC will recognize it for sure!
if doesn't... u should try different computer. not yours. just borrow somebody else computer... see the outcomes? just in case u got error/corrupted activesync.

if still not working... u must using SD card upgrade.
Use any ROM.. use WM5 Official ROM.
Extract the ROM.
put: diskimage_Ver.nb0 to the Blank SD card (use 512MB or 1GB)
and activate the bootloader again.

If your device are normal.. it should looking for SD card and start installing the ROM. If your device badly damage.. it will NOT run both method.

i don't know this is your hardware or Software are damage.
Maybe u should send it to the repair... hopefully u still got the warranty.
If Hardware is the problem, usually they replace the motherboard.
because no way to fix NAND memory module.

just keep trying... don't try one time only...

Good Luck & Pray!

[homer285]

well...

after u see bootloader screen and waiting to download.
it should be ok to connect to USB and PC will recognize it for sure!
if doesn't... u should try different computer. not yours. just borrow somebody else computer... see the outcomes? just in case u got error/corrupted activesync.

if still not working... u must using SD card upgrade.
Use any ROM.. use WM5 Official ROM.
Extract the ROM.
put: diskimage_Ver.nb0 to the Blank SD card (use 512MB or 1GB)
and activate the bootloader again.

If your device are normal.. it should looking for SD card and start installing the ROM. If your device badly damage.. it will NOT run both method.

i don't know this is your hardware or Software are damage.
Maybe u should send it to the repair... hopefully u still got the warranty.
If Hardware is the problem, usually they replace the motherboard.
because no way to fix NAND memory module.

just keep trying... don't try one time only...

Good Luck & Pray!The above information will likely do more harm than good!

[homer285]

i tryied that too but still same postion.....
what shoud i do now plzzz help me i tell u again what it look like
================================================== ==
USB connected,waiting for download ..............

!!!Please use DSUU in OS mode and syc with PC first!!!
Usb Transfer failBro I have recovered from this 20+ times, if its not working (and you can enter bootloader mode) then you're doing something incorrectly, either that or your memcard is incompatible, remember in most cases 256 or 512MB are the only working sizes! So place that EBOOT.nbo into and "empty" SDCard with your PC, enter the bootloader then stick the card in.... It wont take long, once you the screen goes black pull out the SDcard and then enter bootloader, plugin your USB and execute official O2 rom AKU2.2
The flash may not finish completely freezing in the Extended rom update, dont panic! unplug, softreset then flash in DSUU mode...easy as! works every time!

[hiro77]

Bro I have recovered from this 20+ times, if its not working (and you can enter bootloader mode) then you're doing something incorrectly, either that or your memcard is incompatible, remember in most cases 256 or 512MB are the only working sizes! So place that EBOOT.nbo into and "empty" SDCard with your PC, enter the bootloader then stick the card in.... It wont take long, once you the screen goes black pull out the SDcard and then enter bootloader, plugin your USB and execute official O2 rom AKU2.2
The flash may not finish completely freezing in the Extended rom update, dont panic! unplug, softreset then flash in DSUU mode...easy as! works every time!


Confirm!!!
I have done this also even using 1 GB memcard, my memcard is NCP mini SD.
I don't know it was lucky or it does work for 1 GB memcard. Even with non empty one.

But becareful, maybe I am just lucky, perhaps you should use 256 MB or 512 MB only.

[sliders7]

The above information will likely do more harm than good!

hei... he is desperately need help.
We all want to help him, thats all i can offer.
If you have different method.. thats a good news for him.
everybody here try to help him.. contribute something to help him.
so no more harm to his already broken device.

think the brighter side!
cheers :)