Upgrade to ATT2.25 official - Success? Failure

[Phil750]

First try

Wouldn't get past the bootloader. Taking out the SD card now and trying again.

Second try

That seemed to do the trick. Rookie mistake. Sheesh.

[stanswx]

Failed here. It doesn't find my serial # valid. :mad:

[j0nkatz]

Doesn't find my serial number valid either.

[adrianinflorida]

Try going through this link:
http://www.palm.com/us/support/downloads/treo750update/att.html

It didn't ask for the serial there....

[JCJiffy]

I successfully upgraded my unlocked [using Olipro's unlocker] Cingular 750 from the official unbranded Palm WM6 WWE ROM to this new official AT&T WM6 ROM. Only had to edit the payload.xml file to allow higher version range.

At which point is the serial number check done? I didn't see anything of that sort.

[soncorn]

If you go through the palm page:
http://www.palm.com/us/support/downloads/treo750.html

You will be prompted to enter your serial number. There are a myriad of warnings that you will only be able to download it once and to make a copy, etc.

It worked fine for me upgrading from the unbranded WM6 rom using the executable.

[kapster]

Well im glad its actually out. its too bad i cant download it. It says my serial is invalid. edit: trying that link from the other thread.

[nableezy]

direct dl link:
http://forum.xda-developers.com/showthread.php?t=349491

[Marshalus]

Upgraded my fiancee's 750 when I got home from work, worked perfectly. Going to 20 or so at work tomorrow.

[reyjabs]

Updated my Treo 750V to official AT&T WM6 ROM 2.25 using the desktop updater plus the trick posted on this site (http://forum.xda-developers.com/showthread.php?t=345531) and the results by comparison;

Original Vodafone WM6 version

Software Version - TREO750-2.18-VFU
Firmware Version - 1.47.02.00
CC-Cap - VFG-VUK-013
Carrier DB - 261

The New AT&T WM6 version

AT&T 2.25 Updater Method (Full Version)
CE OS 5.2.1620(Build 18125.0.4.2)
Software Version - TREO750-2.25-ATT
Firmware Version - 1.54.27.00
CC-Cap - ATT-ATT-042
Carrier DB - 338
Radio Band
GSM(900+1800)+UMTS 2100
GSM(1900+850)+UMTS(1900+850)
Free Memory
Storage - 43.51 MB
Program - 27.47 MB

Looks like this one has the latest Software and Firmware version compared to the RWE version, except for the radio band. Will Try to vanillalized and see how it goes.:rolleyes:

----------------------------------------------------------------------

Just finished cleaning up the AT&T stuff on the partition and this is what i've got;

AT&T 2.25 Vanilla
CE OS 5.2.1620(Build 18125.0.4.2)
Software Version - TREO750-2.25-ATT
Firmware Version - 1.54.27.00
CC-Cap - 000-000-001
Carrier DB - 335
Radio Band
GSM(900+1800)+UMTS 2100
GSM(1900+850)+UMTS(1900+850)
Free Memory
Storage - 55.31
Program - 27.78 MB

Recovered 11.8MB of Storage and .31MB of Memory. A total of 12.11MB

The good thing is, it feels more responsive than the RWE 2.23 version. Hhhhmmmm! I'll post my feedback after a day or two. Think i'll be having a good night sleep tonight, :p

[kapster]

Rocking wm6 finally! yay thanks for the direct link j0nkatz and nableezy.

[nableezy]

Updated my Treo 750V to official AT&T WM6 ROM 2.25 using the desktop updater plus the trick posted on this site (http://forum.xda-developers.com/showthread.php?t=345531) and the results by comparison;

Original Vodafone WM6 version

Software Version - TREO750-2.18-VFU
Firmware Version - 1.47.02.00
CC-Cap - VFG-VUK-013
Carrier DB - 261

The New AT&T WM6 version

AT&T 2.25 Updater Method (Full Version)
CE OS 5.2.1620(Build 18125.0.4.2)
Software Version - TREO750-2.25-ATT
Firmware Version - 1.54.27.00
CC-Cap - ATT-ATT-042
Carrier DB - 338
Radio Band
GSM(900+1800)+UMTS 2100
GSM(1900+850)+UMTS(1900+850)
Free Memory
Storage - 43.51 MB
Program - 27.47 MB

Looks like this one has the latest Software and Firmware version compared to the RWE version, except for the radio band. Will Try to vanillalized and see how it goes.:rolleyes:

----------------------------------------------------------------------

Just finished cleaning up the AT&T stuff on the partition and this is what i've got;

AT&T 2.25 Vanilla
CE OS 5.2.1620(Build 18125.0.4.2)
Software Version - TREO750-2.25-ATT
Firmware Version - 1.54.27.00
CC-Cap - 000-000-001
Carrier DB - 335
Radio Band
GSM(900+1800)+UMTS 2100
GSM(1900+850)+UMTS(1900+850)
Free Memory
Storage - 55.31
Program - 27.78 MB

Recovered 11.8MB of Storage and .31MB of Memory. A total of 12.11MB

The good thing is, it feels more responsive than the RWE 2.23 version. Hhhhmmmm! I'll post my feedback after a day or two. Think i'll be having a good night sleep tonight, :p
When you say vanillized did you just remove CapPackage or do you have another one that contains all the office or is that included in the os?

[Phil750]

The latest Office is included.

[reyjabs]

When you say vanillized did you just remove CapPackage or do you have another one that contains all the office or is that included in the os?

I removed the CapPackage and Carrier DB. Office is still present but windows live and Messenger is not. If you want them, then just place the cappackage and carrier DB of the RWE version. No AT&T crap.:D

[DAFTEK]

----------------------------------------------------------------------

Just finished cleaning up the AT&T stuff on the partition and this is what i've got;

AT&T 2.25 Vanilla
CE OS 5.2.1620(Build 18125.0.4.2)
Software Version - TREO750-2.25-ATT
Firmware Version - 1.54.27.00
CC-Cap - 000-000-001
Carrier DB - 335
Radio Band
GSM(900+1800)+UMTS 2100
GSM(1900+850)+UMTS(1900+850)
Free Memory
Storage - 55.31
Program - 27.78 MB

Recovered 11.8MB of Storage and .31MB of Memory. A total of 12.11MB

The good thing is, it feels more responsive than the RWE 2.23 version. Hhhhmmmm! I'll post my feedback after a day or two. Think i'll be having a good night sleep tonight, :p

Do you mind share'n the vanilla cream? :D

[reyjabs]

Do you mind share'n the vanilla cream? :D
I will in a day or two.:D

[nableezy]

3g working without carrierdb? was going to remove certain things from att cappackage will post once i get it all working (those xmls can be finicky)

[reyjabs]

With no CapPackage and Carrier DB, I noticed the following Carrier Bar is saying No connection. When I tried the internet, it was okay. When I tried to make a call, it gets through but when I hung up, it keeps saying call in progress. Weird? Hhhmmm Putting back carrier DB again.:confused:

[nableezy]

there are some other settings that get modified in the cappackage you may want to keep in. I am in the process of modding the att cappackage to remove all the stupid apps, keep real player and show it in programs, proxymanager and theme, and not sure what Jaguar_RM_01 is for but ill just keep it in there. Will show live and live search, will post back with results

[miloszz]

Maybe it's not the best place to ask, but... Do the known WM6 bugs (low-backlite) still exist in ATT?

Yesterday I just flashed my 750v from Voda to RWE... :eek:

And the most importand: does it worth?

[reyjabs]

Maybe it's not the best place to ask, but... Do the known WM6 bugs (low-backlite) still exist in ATT?

Yesterday I just flashed my 750v from Voda to RWE... :eek:

And the most importand: does it worth?

Too early to tell. At the moment i'm reinstalling the carrier DB to see if the "No connection" & "Call in progress" glitch is the result of vanillalizing. Apart from that is responsiveness is quite impressive.;) :p :D

[nableezy]

here is a cappackage that loses alot of the att bloat, keeping a few things, specifically real player (wasnt able to get the link to show working on that) att theme, proxy manager, and as i said earlier i didnt know what this is for so kept it jarguar_rm_01. Also all the certificates installed are retained. (to do still: put in extrom rename and mount, i just edited the reg after the fact with sktools which i needed to restore contacts anyway)

CE OS 5.2.1620(Build 18125.0.4.2)
Software Version - TREO750-2.25-ATT
Firmware Version - 1.54.27.00
CC-Cap - ATT-ATT-042
Carrier DB - 338
Radio Band
GSM(900+1800)+UMTS 2100
GSM(1900+850)+UMTS(1900+850)
Free mem:
4.3 MB on extrom
27.5 prog mem
48.5 storage

[arm22]

Does anyone have the SD updater version? Can't find my cable and i'm getting the invalid sn error on the website.

[nableezy]

see first page for direct dl link

[arm22]

Guess i misunderstood. Thought they were both for the desktop.

[Paudash]

Does anyone have the SD updater version? Can't find my cable and i'm getting the invalid sn error on the website.

Ask and ye shall receive.. Good Luck

http://palmone.r3h.net/downloads.palm.com/Treo750_2_25_ATT_EN_SDUpdater.zip

[arm22]

Thank you much.

[reyjabs]

Maybe it's not the best place to ask, but... Do the known WM6 bugs (low-backlite) still exist in ATT?

Yesterday I just flashed my 750v from Voda to RWE... :eek:

And the most importand: does it worth?

There's no backlight issue for me so far.:D

[trublu01]

Does anyone have a cab for all the Windows Live stuff? MS does not offer it anymore. "Everything" is online via web browser.

Marc

*** Found it!, My bad

[tmknight]

Extract the Updater
Edit file payloads.xml
Modify line
<payload_criteria><revision_range><low>1.13</low><high>1.13</high></revision_range></payload_criteria>
to
<payload_criteria><revision_range><low>1.13</low><high>2.25</high></revision_range></payload_criteria>
Save
Execute index.hta
Follow prompts

Now, have fun with the EXTrom and capPackage to make it "yours" (see This Thread (http://forum.xda-developers.com/showthread.php?t=343713&highlight=cappackage))

Cheers!

[PuPpYpWr]

AWESOME!!!!!!!!finally got the update my treo is alive once again

[marleyb]

Maybe it's not the best place to ask, but... Do the known WM6 bugs (low-backlite) still exist in ATT?


POSITIVE!! I can confirm de backlight bug (<40%) is gone :eek: finally

[mtiberio]

here is a cappackage that loses alot of the att bloat, keeping a few things, specifically real player (wasnt able to get the link to show working on that) att theme, proxy manager, and as i said earlier i didnt know what this is for so kept it jarguar_rm_01. Also all the certificates installed are retained. (to do still: put in extrom rename and mount, i just edited the reg after the fact with sktools which i needed to restore contacts anyway)

CE OS 5.2.1620(Build 18125.0.4.2)
Software Version - TREO750-2.25-ATT
Firmware Version - 1.54.27.00
CC-Cap - ATT-ATT-042
Carrier DB - 338
Radio Band
GSM(900+1800)+UMTS 2100
GSM(1900+850)+UMTS(1900+850)
Free mem:
4.3 MB on extrom
27.5 prog mem
48.5 storage


awesome. I used your zip file, deleted the real player file. did a hard reset, now I have a ton of space. Question. do folks leave the extended rom mounted in RW mode? isn't that dangerous? is the 7 meg worth it? plus why the rename of the extended rom step?

[Phil750]

To be honest, I can't remember the reason for the rename ... Olipro? Summiter?

[markcorrado1]

For some reason when I did the update by SD the "Software" stayed at CHG-113, everything else updated just fine, just the Software didn't change, so I downloaded the .exe update and that finally worked, now I'm at ATT-225 :D Feels a hell of a lot more responive than the beta ATT WM6, I installed Pocket Plus 4 and now my Treo runs like it's on NOS :p

[chris44gw]

For some reason when I did the update by SD the "Software" stayed at CHG-113, everything else updated just fine, just the Software didn't change, so I downloaded the .exe update and that finally worked, now I'm at ATT-225 :D Feels a hell of a lot more responive than the beta ATT WM6, I installed Pocket Plus 4 and now my Treo runs like it's on NOS :p
Has this happened to anyone else? I was about to try the update at work where I don't have my cord but I'll wait if it's a waist of time.

[sjeff]

i went through the update process but still show 1.13 - cng. am i updated (i had the earleir version loaded)? i'm thinking i'm not. i keep getting an error from the desktop loader, but the phone keeps updating until it shows complete. nothing looks different though.

[markcorrado1]

Has this happened to anyone else? I was about to try the update at work where I don't have my cord but I'll wait if it's a waist of time.

I did the Aussie WM6 update through SD, when I got home last night and that didn't change the Software either and then the funny thing is, 10 mins later I saw that the official release for ATT WM6. Of course my S/N wouldn't work for the download and when trying to use the download link posted on here, it would download but when I opened it with WINRAR, the zip file showed up as folder a named "Results" and it was empty, I couldn't extract it either. Got to work this morning, downloaded the .exe and opened it with winzip and what do you know, the correct .exe file :)

You can try the SD update first, if that doesn't work, I'm sure the .exe will work ;) Good Luck!!!

[nfopirate]

I mirrored the Rom files as well as ActiveSync 4.5.

You'll find them here:

http://www.thoughttutor.com/treo.html

I hope this helps someone. :)

[auswims]

Upgraded via the .exe updater. Software version updated, got the 2.25, but the radio is 1.47. Is this correct for the update, if so do I need to update RR only to get 1.54.27 ?

[mcnasby]

Hey guys.. I decided to try out the official ROM release this evening. Previous to this upgrade I was running one of the first WM6 Treo roms released on here (from the beginning of the summer - I think it was CNG-1.13).

Anyway, I tried to upgrade via the SD method at first and the phone froze up during the bootloader phase, so I had to use the Palm recovery tool to get my phone working again. Once I did so, I realized all of my firmware/radio/rom numbers were what they should be - so I tried to upgrade again and it basically ran the recovery tool. After that execution I was left with these settings:

CE OS 5.2.1239
Software Ver: TREO750-2.25-ATT
Hardware Ver: A
Firmware Ver: 1.12.0c.00 (I thought this was the radio - am I wrong?)
CC-Cap: ATT-ATT-031
Carrier DB: 242

So from that I have two questions - 1) Are those numbers incorrect? (I assume they are since they differ from the OPs), and 2) Since it won't let me run the upgrade tool again - to properly upgrade the firmware, are there any instructions to downgrade so it will let me try the upgrade again?

Thanks in advance!!

[nableezy]

awesome. I used your zip file, deleted the real player file. did a hard reset, now I have a ton of space. Question. do folks leave the extended rom mounted in RW mode? isn't that dangerous? is the 7 meg worth it? plus why the rename of the extended rom step?
if you remove the real player you may want to remove the <installapp></installapp> section related to it in the capdata.xml file not sure what having a reference to a missing file does. for the extrom i show it just to install a couple of apps to that space and then hide it again, keeping it shown (it is always mounted just usally hidden) has other issues, like storing attachments on the storage card

[nableezy]

Hey guys.. I decided to try out the official ROM release this evening. Previous to this upgrade I was running one of the first WM6 Treo roms released on here (from the beginning of the summer - I think it was CNG-1.13).

Anyway, I tried to upgrade via the SD method at first and the phone froze up during the bootloader phase, so I had to use the Palm recovery tool to get my phone working again. Once I did so, I realized all of my firmware/radio/rom numbers were what they should be - so I tried to upgrade again and it basically ran the recovery tool. After that execution I was left with these settings:

CE OS 5.2.1239
Software Ver: TREO750-2.25-ATT
Hardware Ver: A
Firmware Ver: 1.12.0c.00 (I thought this was the radio - am I wrong?)
CC-Cap: ATT-ATT-031
Carrier DB: 242

So from that I have two questions - 1) Are those numbers incorrect? (I assume they are since they differ from the OPs), and 2) Since it won't let me run the upgrade tool again - to properly upgrade the firmware, are there any instructions to downgrade so it will let me try the upgrade again?

Thanks in advance!!
you can rerun the upgrade tool if you follow this post:
http://forum.xda-developers.com/showthread.php?p=1714931#post1714931

[manfly9884]

Extract the Updater
Edit file payloads.xml
Modify line
<payload_criteria><revision_range><low>1.13</low><high>1.13</high></revision_range></payload_criteria>
to
<payload_criteria><revision_range><low>1.13</low><high>2.25</high></revision_range></payload_criteria>
Save
Execute index.hta
Follow prompts

Now, have fun with the EXTrom and capPackage to make it "yours" (see This Thread (http://forum.xda-developers.com/showthread.php?t=343713&highlight=cappackage))

Cheers!

Thanks for this. Just one request. Can you please explain how to execute index.hta. In the sd updater I can't find any hta index.

Thanks in advance.

[mcnasby]

you can rerun the upgrade tool if you follow this post:
http://forum.xda-developers.com/showthread.php?p=1714931#post1714931

I tried that at first and it didn't work. But, after re-reading the modified code I finally figured out where I went wrong! I was putting in the high number as 1.25 instead of 2.25. Man... that's what happens when you're up at 3am trying look at simple numbers. Thanks!

[chris44gw]

Has this happened to anyone else? I was about to try the update at work where I don't have my cord but I'll wait if it's a waist of time.
FYI, I tried the card update but the OS version would never change from 1.13 to 2.25. I think it went through but to get that to actually show I had to do it from the computer and let the entire process complete.

[dairyfree]

Software Version:
TREO750-1.13-CNG
Hardware Version:
A
Firmware Version:
1.17.20.00

On my Win XPx64 computer, the updater will load PayldMatchdll on the Treo but then refuse to even load the files on the computer. On my wife's Vista laptop, it will get 2/3 of the way through and then fail. From the SD card it fails on the last piece, the OS. I have been trying to search through these forums for any clue as to why this isn't working, but so far, nothing.

Thank you for any and all help.

John

SD Updater last screen image shows this info:
00038005
CHEEIMG.nbh - FAIL

SPLASH1 - OK
BOOTLOADER - OK
GSM - OK
MicroP - OK
EXTROM - OK
OS -

Update Terminate
UPDATE FAIL

[k101d]

I would like to share my experience with my Treo 1.13-CNG unlocoked I had bidden from ebay and use this phone in Thailand for about 5 month ago.

Before upgrade to AT&T 2.25 it had been upgrade to WM6 h3e (Aus) via miniSD method.(I previous try to install to leaked rom->Vodafone->h3e->ROW 2.23->h3e and sometime also back to WM5 :p )

I choose download SDUpdate zip file (because of I don't like to plug usb cable ) and I extract them to miniSD follow the step that explain by Palm and start upgrade but not success they said my miniSD is not Fat32 (:confused: they wrong it alway be Fat32) so I decide to do like this.

-Press PTT+reset to force it install bootloader and then follow like the method that I used with h3e (or leaked rom) finally it work my Treo now install with AT&T 2.25 OS CE and firmware version are correct but the software version still 1.13-CNG that because of it doesn't has any process to chage this version number.

-Then I pull off miniSD and reinsert now it doesn't say about "not Fat32" again (with the same miniSD) it start to install like that it should does all the process is as the same as Palm explain finally I get WM6 with every thing as the same as it could be software version is Treo750 2.25 ATT :D

-It work like a charm and now in still work perfect without hang. I never got low backlight error again and I can use zip file and office mobile 6.1 with this rom without to install any progame to execute zip file.

-I had erase all in ExtROM then make a hard reset to make my phone to be vanilla everything still work great I very happy with this ROM (and still looking for the new one in the future may be WM6.1 or WM7 :eek: )

Hope this help someone to make upgrade via miniSD successfull

[chrys7]

Anyone having Bluetooth issues after the 2.25 update, cant seem to get my Jawbone earpiece to pick up calls or hang up, if I make a call the treo wont auto route it to the earpiece i have to manually do it.

[miloszz]

After update I have problems with CarrierDB. Most of time mu carrier bar says "No Service", but I have service and I can use it :) It even shows me [E] (I'm in edge area). Previously I had RWE and everything was fine. Now my operator is "Unknwn" in phone settings and that's why I have bad info in carrier bar.

My request is: could someone share RWE CarrierDB?

Thanks.

EDIT:
I've found solution in editing HKLM\Software\Microsoft\RIL\Opertor Names :)

EDIT2:
Editing registry is temporary solutiona. But.... I made litle MortScript to change it to my op-name :)
Anyone else has problem with no recognizing his operator?

[reyjabs]

After update I have problems with CarrierDB. Most of time mu carrier bar says "No Service", but I have service and I can use it :) It even shows me [E] (I'm in edge area). Previously I had RWE and everything was fine. Now my operator is "Unknwn" in phone settings and that's why I have bad info in carrier bar.

My request is: could someone share RWE CarrierDB?

Thanks.

EDIT:
I've found solution in editing HKLM\Software\Microsoft\RIL\Opertor Names :)

EDIT2:
Editing registry is temporary solutiona. But.... I made litle MortScript to change it to my op-name :)
Anyone else has problem with no recognizing his operator?

I'm having the same problem. Can you please post how did you do it in details for noobs like me and the others out there?

Thanks:rolleyes:

[Camp]

Can anyone comment on any improvements to the battery life? I gave up the Treo for this reason because I couldn't get through 8-10 hours without having to charge. My Kaiser can last overnight. I would consider returning to the Treo if the battery life is any better.

[miloszz]

I used one of my scripts in MortScript to hard-set operators name on each waking up. It's good, when you're not roaming ;)

I'll make script for it and post here in few minutes. Download and install MortScript this time ;)

EDIT:
I'm attaching two versions of my script:

operator.mscr - is changing only operator's name. Edit file in any text editor, to replace "Your operator name" with real name (it has to be in quotes). Put file somewhere in storage (not card) and run (just tap, you have to have MortScript installed).

switched.mscr - changing operators name, adding info about hardware mute, blinking led on notifications. Install LedUp first! Then make edit file in any text editor, to replace "Your operator name" with real name (it has to be in quotes). Put file somewhere in storage (no card) and run (just tap, you have to have MortScript installed).

Those scripts work everytime you wake up your Treo by presing power button. That's why they aren't perfect. When you switch to another tower, operator info can disapear.

Enjoy :)

[reyjabs]

I used one of my scripts in MortScript to hard-set operators name on each waking up. It's good, when you're not roaming ;)

I'll make script for it and post here in few minutes. Download and install MortScript this time ;)

EDIT:
I'm attaching two versions of my script:

operator.mscr - is changing only operator's name. Edit file in any text editor, to replace "Your operator name" with real name (it has to be in quotes). Put file somewhere in storage (not card) and run (just tap, you have to have MortScript installed).

switched.mscr - changing operators name, adding info about hardware mute, blinking led on notifications. Install LedUp first! Then make edit file in any text editor, to replace "Your operator name" with real name (it has to be in quotes). Put file somewhere in storage (no card) and run (just tap, you have to have MortScript installed).

Those scripts work everytime you wake up your Treo by presing power button. That's why they aren't perfect. When you switch to another tower, operator info can disapear.

Enjoy :)

I don't mind having no operator info. My problem is that my phone is still showing "Call in progress" on the operator info area even after I hang up the the call.:mad:

[miloszz]

I don't mind having no operator info. My problem is that my phone is still showing "Call in progress" on the operator info area even after I hang up the the call.:mad:

I also don't like "No service" with all 5 bars...
But after powering off and on with my script, there's operator name back ;) If you like it, use it, if not, I don't know better solution.

You can use another script, called OpMon (you can find it on this forum, search the main page). It works similar, but in time intervals. I don't like background running scripts, so I'm using my switched :)

[reyjabs]

I also don't like "No service" with all 5 bars...
But after powering off and on with my script, there's operator name back ;) If you like it, use it, if not, I don't know better solution.

You can use another script, called OpMon (you can find it on this forum, search the main page). It works similar, but in time intervals. I don't like background running scripts, so I'm using my switched :)

Thanks miloszz. Can you post a download link to your MortScript?:rolleyes:

[reyjabs]

Can anyone comment on any improvements to the battery life? I gave up the Treo for this reason because I couldn't get through 8-10 hours without having to charge. My Kaiser can last overnight. I would consider returning to the Treo if the battery life is any better.

60 - 70% remaining from 6am to 10pm. Totally dependent on how you use your treo.:)

[mtiberio]

my numbers after an update:
CE OS 5.2.1620 build 18125.0.4.2
TREO750-2.25-ATT
HV: A
Firm: 1.54.27.00
CC-CAP ATT-ATT-042
Carrier DB 338

CE OS 5.2.1239
Software Ver: TREO750-2.25-ATT
Hardware Ver: A
Firmware Ver: 1.12.0c.00 (I thought this was the radio - am I wrong?)
CC-Cap: ATT-ATT-031
Carrier DB: 242

So from that I have two questions - 1) Are those numbers incorrect? (I assume they are since they differ from the OPs), and 2) Since it won't let me run the upgrade tool again - to properly upgrade the firmware, are there any instructions to downgrade so it will let me try the upgrade again?

Thanks in advance!!

[miloszz]

Thanks miloszz. Can you post a download link to your MortScript?:rolleyes:

You can find my scripts some posts above as a attachment.
http://forum.xda-developers.com/showpost.php?p=1722667&postcount=53

[k101d]

Hi miloszz or anyone ...

I think you can help me do you know how to set auto disconect GPRS after it has been download or nothing to do for a certain second like 60 second.I hope you can use mortscript to do that if you know please let me know.

I know PhoneAlarm can do but I don't like to use this.

Thanks.
k101d

[miloszz]

Hi miloszz or anyone ...

I think you can help me do you know how to set auto disconect GPRS after it has been download or nothing to do for a certain second like 60 second.I hope you can use mortscript to do that if you know please let me know.

I know PhoneAlarm can do but I don't like to use this.

Thanks.
k101d

I think you have to use 3rd party apps, but I don't know which. Windows can't do that by his own :( Personaly I disconnect manualy ;)

In MortScript I can disconnect, but I have no idea how to recognize idle state of connection...

[k101d]

Thanks miloszz

I just done with registry hack the reason that I don't want to use PhoneAlarm is that it change my profile setting.

How to do registry hack

HKLM\Comm\ConnMgr\Planner\Settings\

delete or rename the SuspendResume to XXXX then Add new one as name SuspendResume and select the type to be String the value of this key set to GPRS_bye_if_device_off

and look for the other key name CacheTime (if not found add new one with type of Dword) then set it to the number of second before disconnect like this

CacheTime = 60

check for every thing right and then make a soft reset after if reboot go to turn on GPRS like check your mail and after the download mail complete and wait for 60 second it auto disconncet GPRS.

I wonder it work I notice I has been make this before but it doesn't work so I decide to rename the key SuspendResume and make a new one and now I very happy with this registry hack on my Treo750

k101d.
PS: finally
HKLM\Comm\ConnMgr\Planner\Settings\SuspendResume=G PRS_bye_if_device_off
HKLM\Comm\ConnMgr\Planner\Settings\CacheTime=60

[streetbiker06]

The unlock tool screwed up my phone and the upgrade won't flash but the phone still works. How would i mess it up so it won't boot? i need to get it warrentied but it shows hacked bootloader..... Help please? i don't know how to mess it up.

[kapster]

I can't believe the dialer and comm manager are still the same from WM5. it looks so ugly.

Has anyone been able to use a new skin on the 750 for dialer or comm manager?

I just tried the htc dialer and it didnt change.

Also i made sure and changed the the registry entry:
[HKEY_LOCAL_MACHINE\Security\phone\skin]
Enabled=0

but still no go.

[miloszz]

I can't believe the dialer and comm manager are still the same from WM5. it looks so ugly.

Has anyone been able to use a new skin on the 750 for dialer or comm manager?

I just tried the htc dialer and it didnt change.

Also i made sure and changed the the registry entry:
[HKEY_LOCAL_MACHINE\Security\phone\skin]
Enabled=0

but still no go.

Using MemMaid or SKTools disable today plugin called "Active Call".
Then you'll have access to windows, not palm, dialer, but some more things will change...

[kapster]

Using MemMaid or SKTools disable today plugin called "Active Call".
Then you'll have access to windows, not palm, dialer, but some more things will change...

hey thanks for the reply.

Hmm so im guessing by doing this i disable that program on the today screen that can look up numbers?

If that goes i know i will lose the green and red button functionality.

I will try it and see what happens, dont have anyo of those programs installed so I will have to find them and go from there.

[miloszz]

hey thanks for the reply.

Hmm so im guessing by doing this i disable that program on the today screen that can look up numbers?

If that goes i know i will lose the green and red button functionality.

I will try it and see what happens, dont have anyo of those programs installed so I will have to find them and go from there.

You don't have to remove dial-lookup. After changes, with green button you bring up keypad, with red you send Treo to sleep. But you have to use onscreen button to end call, because red button doesn't work then...

[jbstix]

Thanks miloszz

I just done with registry hack the reason that I don't want to use PhoneAlarm is that it change my profile setting.

How to do registry hack

HKLM\Comm\ConnMgr\Planner\Settings\

delete or rename the SuspendResume to XXXX then Add new one as name SuspendResume and select the type to be String the value of this key set to GPRS_bye_if_device_off

and look for the other key name CacheTime (if not found add new one with type of Dword) then set it to the number of second before disconnect like this

CacheTime = 60

check for every thing right and then make a soft reset after if reboot go to turn on GPRS like check your mail and after the download mail complete and wait for 60 second it auto disconncet GPRS.

I wonder it work I notice I has been make this before but it doesn't work so I decide to rename the key SuspendResume and make a new one and now I very happy with this registry hack on my Treo750

k101d.
PS: finally
HKLM\Comm\ConnMgr\Planner\Settings\SuspendResume=G PRS_bye_if_device_off
HKLM\Comm\ConnMgr\Planner\Settings\CacheTime=60

Awesome!!! Thanks for posting this k101d... works like a charm.
This was one of my pet peeves and a major drain on the battery.

Worked perfect - Merry Christmas!

[ATLS4]

For whatever reason the first two seem to get stuck in the boot-loader and I had to use the Palm recovery tool.