Restore official ROM

[cabexas]

Hello,

first of all, i want to thank you all for this great forum.

I have a small problem. I have bought a few days a HTC P3600. Everything was working fine.

Yesterday i tried to upgrade to wm6 using MARY 3.4.1 with sucess following the upgrade guide in trinityguides.info.
I have installed the Des’ Crash-Proof SPL and then flash the MARY 3.4.1 ROM.

Until now everything is working fine except the active sync. I tried to AS with the usb cable but it won't connect. It gives me the following error:

"Communication Error:Cannot start communications with the desktop computer. Remote Networking could not start due to a critical error (Error 608). Please reconnect your device. If the problem persists, restart your device using the instructions provided by the manufacturer."

I've googled it and tried all the suggestions that i could find, with no success.
If i connect via BT there is no problem.

The problem is that i want to put back the official ROM from HTC and if i can't connect with active sync via usb, i can't restore it.

BTW, if i put back the official ROM, the Hard-SPL is also flashed to the original??

Thank you

[fktsndr]

Hello,

first of all, i want to thank you all for this great forum.

I have a small problem. I have bought a few days a HTC P3600. Everything was working fine.

Yesterday i tried to upgrade to wm6 using MARY 3.4.1 with sucess following the upgrade guide in trinityguides.info.
I have installed the Des’ Crash-Proof SPL and then flash the MARY 3.4.1 ROM.

Until now everything is working fine except the active sync. I tried to AS with the usb cable but it won't connect. It gives me the following error:

"Communication Error:Cannot start communications with the desktop computer. Remote Networking could not start due to a critical error (Error 608). Please reconnect your device. If the problem persists, restart your device using the instructions provided by the manufacturer."

I've googled it and tried all the suggestions that i could find, with no success.
If i connect via BT there is no problem.

The problem is that i want to put back the official ROM from HTC and if i can't connect with active sync via usb, i can't restore it.

BTW, if i put back the official ROM, the Hard-SPL is also flashed to the original??

Thank you

Try an other usb port on your computer.

And yes, offical rom restore everything (ipl,spl,radio,os)

[cabexas]

I have already tried that.

The only thing that i can remember that i didn't tried, is connect in a different computer, but i will try that as soon as i get home.

thanks

[mrjay]

try another ROM. got that activesync issue also with every Mary ROM.

[fktsndr]

Active Sync Error 608
Try this to solve the problem:

Quote:
Originally Posted by nanni100
I solved cause my Windows Firewall was damaged and not customizable, then i found a reg file to solve this problem, installed on pc and reboot. On startup i saw the window of Win Firewall who asked me to unlock Activesync i said yes and turn off the firewall

I have a ethernet router with DHCP enabled

Then i configured the phone:

-Enabled Advanced Netword Function
-Go on Setup, Wi-Fi, Network, Remote HOST- NDIS
-Select the Specific IP Address like this:
IP Add: 169.254.2.1
Sub Mask: 255.255.0.0
Gateway: 169.254.2.2
and on the other page put only on the first DNS: 169.254.2.1

on the pc lan connection i leave the dhcp enabled "Obtain IP Address from serv" also for DNS (obviously cause i have the DHCP enabled on my router)

And MAGICLY all start works FINE!!!

After hours and hours spent on configurations, the problem was "simply" the windows firewall, but also the configuration of Remote Host-NDIS is important

Hope that can be useful for other

[cabexas]

Right now i don´t have the MARY rom but the TUGA V3 ROM and problem continues. I have already tried to setup Remote HOST- NDIS like that and it didn´t work too.

Anyway thanks for all your help.

Thanks

[SuperSport]

I use the SD Card Method. MUST BE FORMATTED AS FAT32 first. (As per willowxda's post. Thanx Willowxda)

Copy SSPL_TRIN.exe to your SD card's Root folder. (Included in ZIP File)

Rename the RUU_signed.nbh file in your OEM Rom to TRINIMG.nbh

Copy TRINIMG.nbh to your SD card's Root folder.

Run SSPL_TRIN.exe from your device.

Allow it to Flash and Restart as needed.

Works like a charm... :)

[rtdney]

Hello,

first of all, i want to thank you all for this great forum.

I have a small problem. I have bought a few days a HTC P3600. Everything was working fine.

Yesterday i tried to upgrade to wm6 using MARY 3.4.1 with sucess following the upgrade guide in trinityguides.info.
I have installed the Des’ Crash-Proof SPL and then flash the MARY 3.4.1 ROM.

Until now everything is working fine except the active sync. I tried to AS with the usb cable but it won't connect. It gives me the following error:

"Communication Error:Cannot start communications with the desktop computer. Remote Networking could not start due to a critical error (Error 608). Please reconnect your device. If the problem persists, restart your device using the instructions provided by the manufacturer."

I've googled it and tried all the suggestions that i could find, with no success.
If i connect via BT there is no problem.

The problem is that i want to put back the official ROM from HTC and if i can't connect with active sync via usb, i can't restore it.

BTW, if i put back the official ROM, the Hard-SPL is also flashed to the original??

Thank you




it is very simple but it took me too long time to figure out.
My PC hangs several times, I thought it is related to DMA or to IRQ interrupt requests for the microproccessor, but failed to solve it. This problem never happened to me while I was having the Qtek ppc, and even when I used the official HTC ROM when I bought this TrinTy. Then I started to check everything related to USB connection till I catch it. it is very silly, just to clear one checkbox.

Here what worked for me:

Click Start > Settings > Connections > USB to PC

you will find a checkbox......Just uncheck it. --------> Thats to disable advanced network functionality.

I believe it should work for you.

[nightfear]

Try POWER + CAMERA + SOFTRESET (this enter the bootloader mode) and then install the ROM you like ... you will get no errors !!!

[cabexas]

Click Start > Settings > Connections > USB to PC

you will find a checkbox......Just uncheck it. --------> Thats to disable advanced network functionality

That was the first things that i tried to do, but with no luck.

Yesterday, i did what nightfear suggested and it worked fine.

As soon as i restored the official rom, AS started to work like a charm.

That is a strange issue, but for now it's resolved.

Lets see if the problem doesn't come back when i put WM6 on it again.

Thank you all for your help.

[willowxda]

I have been trying to upgrade flash via SDCard but it did not work no matter how hard I tried (switch btw hardspls).

Then I realised that I have to format the SDCard to FAT32 so that the Hard SPL can recognise the card in bootloader prompt.

I am using Hard SPL 1.30