Kaiser and VPN

[dizzy33]

Hello,

does someone use a VPN software on the Kaiser ?
Wich one ?
I tried several but none worked.

[GTRoberts]

My Kaiser is using the built in VPN client, to VPN into two different Microsoft RRAS networks using PPTP and IPSec/L2TP.

What problems are you experiencing? What type of networks are you trying to VPN into?

[dizzy33]

Thanks a lot for your answer !
I didn't know the Kaiser had a VPN client included ...
Where is the application ? What's its name ?
Is there a documentation I can find somewhere to help me to configure it ?

The other thing is that I use a SecurID password to connect to my corporate network, I don't know if this can work also with the Kaiser VPN.

In fact I would like to connect to my corporate network wich accepts both IPSec/UDP and IPSec/TCP. All I know is that I need a Cisco compatible VPN application.
I tried "AnthaVPN", it connects to our Cisco server, but then it disconnects after a few "Time Out" errors.

Thanks again for your help !

[akash_84]

I would be interested in this too... we use Cisco at work using Cisco ipsec/udp but no idea how to set this up on the phone

[dizzy33]

Finally I've found how to use the buit in VPN, but it still does not work for me, because of the SecurID password I think (it says my login/password may be incorrect).:(

Here is how to access to the built in VPN (my device is french, I translate it to english but I'm not sure the names will be the same on english devices):

parameters/connections -> choose the "Connections" icon.
Then choose "Modify/Configure my VPN servers"
After you filled everything there, choose "Manage existing connections".
At the bottom of the screen, choose "VPN". The VPN connection you made should appear here.
Put your stylus on it until the options "delete" and "connect to" appears.
Select "connect to" and then you should be connected to your network.

I hope this helped.

So finally, I am still searching for a VPN application wich would work with SECURID passwords.
Does someone know one ?

[amruths]

Even my office uses a Cisco PIX Firewall with VPN. Even i have tried many softwares, but nothing seems to work. I thik it is because of the 2 phase authentication of the Cisco VPN.
Also just for info, we use IPSec over UDP (NAT/PAT)
How to set this up in my KAISER?

[Haija]

Hello to all

Im using AnthaVPN and it's work great with Cisco VPN Concentrator System in my KAISER. There must be also a way to connect to a pix.

http://forum.ppcwarez.org/viewtopic.php?f=41&t=32009&hilit=AnthaVPN

Greets

Haija

[dizzy33]

Like I said, I tried this one, but it did not work with SecurID keys.
I also had a problem with it related to the WIFI :
when I tried to use it with WIFI enabled, if I wanted then to disable the WIFI, it was impossible, even after a soft reset. I had to deinstall AnthaVPN to be able to disable the WIFI.
So finally I think the built-in VPN is better than AnthaVPN because I had no WIFI issue with it.

[Haija]

I have read the manual from the Homepage AnthaVPN and for me its OK. But i haven't testet over wifi. Over GPRS works great.

[LunaticShade]

i'm using the Bluefire VPN CLient (www.bluefiresecurity.com) to connect to my university's vpn (cisco) and it's working great.
with AnthaVPN i was not able to disconnect wifi anymore (phone would hang up -> soft reset -> wifi on again), don't know if they fixed this till now

[dizzy33]

So I was not alone to have wifi problems with AnthaVPN !

Finally I tried Bluefire VPN, it works a lot better than AnthaVPN (no more wifi problems !), I can go upto the SecurID login, but after that, at "Phase 2", I have an error code talking about IPSec parameters...
So I still have problems but now I know that Bluefire is working with securid keys.