O2 Atom Stuck

[abuawab]

Hi Guyz
I'm trying to upgrade my friends O2 ATOM to any new software .
the problem is that when it reaches RADIO UPDATE
it stays on 0%
PDA Screen says ( UPDATE RADIO STACK ,,,, PLEASE WAIT ... )

IF I REMOVE THE USB CONNECTION , THE ATOM STICKS ON WINDOWS SCREEN , AND SOMETIMES ON SCREEN ALIGNMENT .

i tried three different roms ad got the same result , even thru BOOTLOADER screen, it is very imbarresing , as i promised him a better performance device , now it is not booting .

hhhheeeellllppppp

[abuawab]

pleaseeee
he is looking at me and only flames are showing from his eyes

[erichoatwork]

just keep flashing the device, it fails sometimes on the first flash at the radio section, simply disconnect it and then reflash it for the 2nd time.

[hiro77]

How long you've wait the process?

I've upgrade my atom more then 10 times and when in Radio Updates it's also not showing the progress as what you've seen.
But it doesn't mean the process is stopping. Just wait and the process will finished. (Usually in it shows the progress in your PDA screen)

Don't unplug your usb cable before it finished.

[abuawab]

unfortunatly i had to unplug the ATOM
now it gives only one massege
UPDATE UTILITY
did i brick it ?

[konanda]

for me, I'd take out battery a while and then connect USB and try to flash with wm5 rom like "Xda-Atom-ENG-20060105" (you can found on this forum under "Collection of All O2 XDA ATOM ROM AKU *** (WM5(2*->3*) & WM6 (0.3*->0.7*))" post).
And then upgrade to wm6 rom by ... jiggs, homer285 & udayrulz .....

[abuawab]

hi konanda
will this resolve the problem?

[konanda]

yeah, I have done alot of time to solve this problem on other xda atom also .... if you want, I'l upload this wm5 rom on mediafire ....

[abuawab]

thanx
i tried this way 2 , but again it sticks on 0% , with a massege saying , UPDATE DADIO STACK PLEASE WAIT ...
any suggestions?
shall i go to SD card way ?

[konanda]

Just keep flashing the device.. take a bit longer time and then will complete the updating ....

[homer285]

thanx
i tried this way 2 , but again it sticks on 0% , with a massege saying , UPDATE DADIO STACK PLEASE WAIT ...
any suggestions?
shall i go to SD card way ?
Allow the projected 30 mins for the update, if you plan to update via SD Card be sure to read, ALOT! :D good luck, oh you could have a little read in the Atom Wiki too.

[chaoskaos]

could be your cable or connection?

[abshie]

I had the same problem & tried different ways explained in this thread.
No success.
I tried with old original ROM and all new ROMs as well, it stucked on updating RADIO BURN message on computer and ATOM displays Updating RADIO STACK.

I tried removing battery and kept for some times and tried back but same result. Please anyone can help me

[max20041988]

i had this problem also. i was unable to reflash my atom. It stuck at the same screen as what the previous user described. At first, the touch screen failed and there isnt any GSM, as in under wireless manager, "phone" isnt there.. E.g There should be Wifi, Phone and Bluetooth in wireless manager.. But sometimes after some soft reset with the taking out of battery, the gsm comes back together with the touchscreen. But this occurred quite frequently until i decided to re-flash it.

Im using the official rom of Xda-Atom-ENG-20060426-MOT0822.. Is there any way to solve this problem?

Thanks in advance.

[brian_2cool4u]

i had this problem also. i was unable to reflash my atom. It stuck at the same screen as what the previous user described. At first, the touch screen failed and there isnt any GSM, as in under wireless manager, "phone" isnt there.. E.g There should be Wifi, Phone and Bluetooth in wireless manager.. But sometimes after some soft reset with the taking out of battery, the gsm comes back together with the touchscreen. But this occurred quite frequently until i decided to re-flash it.

Im using the official rom of Xda-Atom-ENG-20060426-MOT0822.. Is there any way to solve this problem?

Thanks in advance.

try to update to any WM6 or if you still want the WM5, there are a lot of ROM
's available. I had this tradgic experience aswell with o2 default ROM. Im contented with the WM6 although no a2dp support yet =)

[brian_2cool4u]

thanx
i tried this way 2 , but again it sticks on 0% , with a massege saying , UPDATE DADIO STACK PLEASE WAIT ...
any suggestions?
shall i go to SD card way ?

i'll agree with the others, better change USB cable as well =) It could be faulty you can use cable from canon digicam/motorola phones et. al.

I would suggest reflashing the ROM with cooked ROM's available here like WM6 or WM5 if you still want to stick with it. o2 default ROM gives me a headache before. No1 rule before upgrading ROM...... Read the WIKI hehehehe

[tjkhattak61]

Hey guys I had the same problem, I went through the procedure as here http://forum.xda-developers.com/showthread.php?t=358442
Hope u can also flash 'OS+EBoot' part of it and then after ur Atom Exec restarts u can go in bootloader and flash the original WM5 from O2 ‘Xda-AtomExec-ENG-20060614_R060428N_EX0028.exe’. :)