atom exec is deleted files of wm5.0 by virus

[kcmtno]

please help me expert.

now o2 like dead phone. no windows in there. i try to boot and just have the screen black and some information:

mn2 bootloader

jun 13 2006 ...........
...................
debug module through uart
jump to dm.......


i try to conect to pc and upgade files in forum but can not conect.

i think, it should be install for the original wm5.0 before upgrade.

how can i get wm5.0 original and try to fix please

thank alots

[homer285]

http://forum.xda-developers.com/showthread.php?t=319945&page=2&highlight=eboot
check post 12

[kcmtno]

http://forum.xda-developers.com/showthread.php?t=319945&page=2&highlight=eboot
check post 12



chartreux
Member Join Date: Aug 2007
Posts: 92




--------------------------------------------------------------------------------

Quote:
Originally Posted by mphoneclinic
There is no SD card in the phone. the upgrades is went well 100% flashed in.

But the phone still stuck on startup O2 LOgo.

any idea??

BR

what ROM version that you used?

think better for you to downgrade to ORIGINAL WM5 ROM. since ATOM EXEC used the MN2 bootloader you will not able to update you rom via bootloader mode. BUT I will share my experience on my ATOM EXEC when my device in unable to boot condition.

1. you need to downgrade your bootloader to MN1 type (ATOM Standard bootloader), copy the EBOOT.nb to your SD card
2. prees camera+reset --> you will see the bootloader found and update, and device turn off
3. TAKE OUT SD CARD !!
4. take out your battery, press CAMERA+RESET and plug in back your battery, you should come back to bootloader mode again (now you should have MN1 bootloader on your ATOM EXEC)
5. Run Xda-Atom-Exec-ENG-20060721-MOT0822.exe, the ROM will be intalled on bootloader mode BUT will be stack 6% on EXTENDED ROM
6. when 6% (progress bar not move anymore) just take out your USB cable from your ATOM --> on this stage you already upgrade ROM + bootloader(MN2) just the EXT ROM failed to update
7. turn on your device, you will able to enter to WM5 but the job not finish yet.
8. run one more time Xda-Atom-Exec-ENG-20060721-MOT0822.exe on DSUU mode, viola after completed the progress your device will be back on ORIGINAL WM5.

note: please read step by step, if you don't understand than better DON'T DO IT, send to service center will be good choice otherwise your ATOM EXEC can really become paper weight!
Attached Files

thank you, i trying this way.

[vishal9757]

my o2 atom exec unbale to boot in normal mode.
iT BOOT ONLY IF I PRESSED CAM+REST, THEN IT SHOWS MN2 BOOTLOADER,
1- FOR DEBUG MODE 2 FOR DM
IF I PRESSED 1 AND GOES DEBUG MODE , IT ASKED FOR RESTART.
IF I RESET THEN IT BOOT UP , BUT BATTERY GOES LOW IMMIDIATE,& SHUT DOWN DEVICE.
THEN I TRY THIS ANOTHER TIME BUT THIS TIME WHILE RESTART DEVICE I PLUG FOR CHARGEING CABLE. NOW DEVICE START OK ,BUT I REMOVED BATTERY AND TEST FOR SWITCH ON FOR ANOTHER TIME IT NOT STARTED. IT GOES BACK IN DEAD MODE. NOW I M USING IT THOUGH DEBUG MODE.
SO ANY ONE TELL ME WHAT TO DO FOR THIS OR UPGRADE OS .

THANKS

VISHAL



--------------------------------------------------------------------------------

Quote:
Originally Posted by mphoneclinic
There is no SD card in the phone. the upgrades is went well 100% flashed in.

But the phone still stuck on startup O2 LOgo.

any idea??

BR

what ROM version that you used?

think better for you to downgrade to ORIGINAL WM5 ROM. since ATOM EXEC used the MN2 bootloader you will not able to update you rom via bootloader mode. BUT I will share my experience on my ATOM EXEC when my device in unable to boot condition.

1. you need to downgrade your bootloader to MN1 type (ATOM Standard bootloader), copy the EBOOT.nb to your SD card
2. prees camera+reset --> you will see the bootloader found and update, and device turn off
3. TAKE OUT SD CARD !!
4. take out your battery, press CAMERA+RESET and plug in back your battery, you should come back to bootloader mode again (now you should have MN1 bootloader on your ATOM EXEC)
5. Run Xda-Atom-Exec-ENG-20060721-MOT0822.exe, the ROM will be intalled on bootloader mode BUT will be stack 6% on EXTENDED ROM
6. when 6% (progress bar not move anymore) just take out your USB cable from your ATOM --> on this stage you already upgrade ROM + bootloader(MN2) just the EXT ROM failed to update
7. turn on your device, you will able to enter to WM5 but the job not finish yet.
8. run one more time Xda-Atom-Exec-ENG-20060721-MOT0822.exe on DSUU mode, viola after completed the progress your device will be back on ORIGINAL WM5.

note: please read step by step, if you don't understand than better DON'T DO IT, send to service center will be good choice otherwise your ATOM EXEC can really become paper weight!
Attached Files

thank you, i trying this way.[/QUOTE]

[vishal9757]

my o2 atom exec unbale to boot in normal mode.
iT BOOT ONLY IF I PRESSED CAM+REST, THEN IT SHOWS MN2 BOOTLOADER,
1- FOR DEBUG MODE 2 FOR DM
IF I PRESSED 1 AND GOES DEBUG MODE , IT ASKED FOR RESTART.
IF I RESET THEN IT BOOT UP , BUT BATTERY GOES LOW IMMIDIATE,& SHUT DOWN DEVICE.
THEN I TRY THIS ANOTHER TIME BUT THIS TIME WHILE RESTART DEVICE I PLUG FOR CHARGEING CABLE. NOW DEVICE START OK ,BUT I REMOVED BATTERY AND TEST FOR SWITCH ON FOR ANOTHER TIME IT NOT STARTED. IT GOES BACK IN DEAD MODE. NOW I M USING IT THOUGH DEBUG MODE.
SO ANY ONE TELL ME WHAT TO DO FOR THIS OR UPGRADE OS .

THANKS

VISHAL