nyitalian718
18th December 2007, 12:03 AM
Wing for NOOBS like me.
All information in this thread was copied from other peopled, all I have done is put it in one place.. I will update this from time to time
For updates please check the site I have created for the wing.
DISCLAIMER:
I am in no way responsible the content listed below, most of this should work as the people of the community do help each other. Please be careful. And report any errors to me.
Adding Information, If you wish to add information to this post, please post it below, I will add the info, please provide me a link to the data if you have it, and the original writer of said info, I will give the credit to the writing and the provider of said info.
Part 1: useful thread Post.
Part 2: Random tweaks from HOFO.
Part 3: Rom’s Touch it Wing 2.3
3a Touch-IT for The Wing Full and Lite Ed.
Part 4: Random Info
Part 5: T-Mo Wing RUU for USA
Updated on December 17 2007
Part 1: Useful Threads
Cab install for the Wing
The Following is from zcink @ XDA
Original thread @ http://forum.xda-developers.com/showthread.php?t=341867
Great Wing Info Thread
The following is from Nyer78 @ XDA
Original Thread @ http://forum.xda-developers.com/showthread.php?t=326655
General HTC Cabs
The Following is from patr!k @ XDA
Original thread @ http://forum.xda-developers.com/showthread.php?t=344533
Part 2 tweaks.
The Following is from – Tater_Tot24 @ Howard forums
Original thread @ http://www.howardforums.com/showthread.php?t=1215155
Please Note that some of these entries only apply to the WING.
Add Side Button Functionality:
1. Using a registry editor go to HKLM\Software\Microsoft\Shell\Keys
2. In Keys, create a new Key named "40C7".
3. Copy the contents of 40C5 to to 40C7.
4. Edit the "Name" value replacing the "4" with a "5" (5 is Voice command button).
5. Close the registry editor.
6. In Settings\Buttons you should see the new "Button 5(Hold)" entry. If not, soft reset.
Note: I had to make voice command the hold function and screentoggle the non hold function for it to work correctly.
Camera Settings:
1. Open the camera, so you can see images thru the camera lens.
2. Go to bottom of screen & click on the "Y" at far left side.
3. Now move to the 4th icon at the bottom, and set the resolution on "L" and the quality on Super Fine (not Basic).
4. Move to the next icon on the right, and set the Capture Mode on either "Burst" or "Sports"
5. Next, click the icon at far left and set your Capture Speed to either Moderate or Fast, and "Snapshots" to at least 3.
6. Click on the next icon on the right and set it on Storage Card.
7. Finally, click the "Sun" and set the White Balance on Auto.
8. Click OK in the upper right, and you're almost set. Just go now to far left of camera screen and click either of the tiny > arrows until you come to 1/3 (or 1/5 or 1/7 or 1/10, depending on how you set "Snapshots.")
9. Now you're set to take some really great pictures. They will be sharp & clear all the way from about 12 inches to infinity.
10. For sharper pictures, leave the setting at 1x. Anything else is a "Zoom" shot.
Enhanced File System Performance:
Registry: HKLM\System\StorageManager\FATFS
Key: CacheSize (dWord)
Default: 0 (I am not sure what this equates to, the valid values I know about are 4096, 8192, 16384)
New Value: 8192
Hide SIM Contacts:
Registry: HKCU\ControlPanel\Phone
Key: ShowSim (dWord)
Default: 1 (show)
New Value: 0 (hide)
Active Sync Running in the Background Fix:
1. Create a “Fake Server”
Configure Server Menu Activesync Programs 2.Go to Start
3. In the following screens you can enter any old garbage. It does not matter, but just in case your unsure, just type the following in the indicated boxes:
4. Server Address: fake / User name: fake / Password: fake / Domain: fake. Then you are finished creating the fake server
5. Finally, UNCHECK the box in the time zones tab in the phone settings (This may sound silly, but it works! I promise!!)
MyFavs Missed Call Fix:
Registry: \HKLM\Security\Phone\NoLog
Key: List
Action: REMOVE
Hard Reset Instructions:
1. Hold down both of the “soft buttons”
2. Perform a soft reset with the stylus while still holding down the buttons
3. Push the green phone button to confirm that you do want to do a hard reset
DeBrand the Phone:
1. Perform a Hard Reset (instructions listed below)
2. Phone cycles through format, installs WM6, then prompts you to config touch screen
3. Install finishes and loads WM6
4. Then a prompt appears warning that EXT ROM will install extra contents (don't install! poke the soft reset button before EXT ROM install)
5. Hit soft reset button when EXT ROM prompt appears, you have 3 seconds!
6. Power on like normal
Send Large MMS:
Registry: HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Size Limit
Key: wap2sendlimit1 (you can also change wap1sendlimit1)
Default: 307200
New Value: 1228800 (1200K)
Set the new value by going to Text/Multimedia --> Menu --> New --> MMS --> Menu --> Options --> MMS Options --> Servers --> T-mobile MMS
MMS Sending Issue Fix:
1. Due to incorrect Port setting for the MMS server, the phone may not be able to send MMS messages all the time.
2. Go to Text/Multimedia --> Menue --> New --> MMS --> Menu --> Options --> MMS Options --> Servers --> T-mobile MMS
3. Make sure the settings are set to: Gateway: 216.155.165.50 / Port Number: 8080 / Server: http://216.155.174.84/servlets/mms
Remap Soft Buttons:
For Calendar
Registry: HKCU\Software\Microsoft\Today\Keys\112
Key: Default
Default: Calendar
New Value: Internet (anything you want goes here)
Registry: HKCU\Software\Microsoft\Today\Keys\112
Key: Open
Default: HTCCalendar.exe
New Value: \Windows\iexplore.exe (again, anything you want goes here)
For Contacts
Registry: HKCU\Software\Microsoft\Today\Keys\113
Key: Default
Default: Contacts
New Value: (anything you want goes here)
Registry: HKCU\Software\Microsoft\Today\Keys\113
Key: Open
Default: \Windows\RSK\Contacts.lnk
New Value: (again, anything you want goes here)
Remove / Modify Startup Sound:
Registry: HKLM\SOFTWARE\HTC\StartupAnimation
Key: Enable (dWord)
Default: 1 (jingle on)
New Value: 0 (jingle off)
Registry: HKLM\SOFTWARE\HTC\StartupAnimation
Key: Volume (dWord)
Default: 127
New Values: 16 - 200
You can also modify the sound and animation by changing the WAV and GIF files in these two keys.
Registry: HKLM\SOFTWARE\HTC\StartupAnimation
Key: WAVFile (SZ String Value)
Default: \Windows\T-Mobile startup.wav
New Value: (whatever you want)
Registry: HKLM\SOFTWARE\HTC\StartupAnimation
Key: GIFFile (SZ String Value)
Default: \Windows\TMO_Startup.gif
New Value: (whatever you want)
Remove the Tray Icon from Today Screen:
Registry: \HKLM\init\
Key: Launch92
Action: DELETE
Note: If you want to keep some but not all of the icons:
Registry: HKLM\Software\HTC\TrayApplet
There you'll find listings for each icon (the folders are for the WinWap, MyFaves, and CommManager tray icons). Remove the ones you don't want and soft reset. If you remove the music player settings, you will then have to uncheck the plug-in from Today items.
Adding Slide Sounds:
1. First you are going to need two .wav files.
2. Once you have the two sounds that you want to use, Rename them to Slider3_in.wav and Slider3_out.wav and place them in the \Windows Folder on your phone.
3. Go to the Registry: HKLM\Software\HTC\SlidingSound\.
4. Once your there you should see 3 Folders (keys) that are labeled 0-2, and 2 Dword Files (ActiveSlidingSound and SlidingSoundEffect).
5. In that same directory, you need to make a new folder (key) and label it "3". Once that is made, you need to go inside that "3" which should be empty and have nothing inside.
6. Now you need to make a new String.Label the String "in" without quotes, and then set the string to "Slider3_in.wav". Now you should have one string inside folder (key) 3.
7. Now you need to make another String inside of folder (key) 3. Just follow step 5, but instead of using "in" use "out". So it should be labeled "out" and should be set to "Slider3_out.wav".
8. Next, create another String inside of folder and call it “Default” (no quotes). Now set that sting to whatever you want the new schema to be called (i.e. wind chimes, customer, etc).
9. Now head back to the registry: HKLM\Software\HTC\SlidingSound\, where you should now see folders (keys) 0-3 now and two Dwords files.
10. Now change Dword ActiveSlidingSound to 3, which is the new sound you created.
Disable the SMS Sent notification
Regisrty: HKLM\Software\Microsoft\Inbox\Settings\
Key: SMSNoSentMs (decimal)
Default: 0 (on)
New Value: 1 (off)
Note: Please note that the 'Settings' key may not exist in your device, and thus may have to be created first.
All information in this thread was copied from other peopled, all I have done is put it in one place.. I will update this from time to time
For updates please check the site I have created for the wing.
DISCLAIMER:
I am in no way responsible the content listed below, most of this should work as the people of the community do help each other. Please be careful. And report any errors to me.
Adding Information, If you wish to add information to this post, please post it below, I will add the info, please provide me a link to the data if you have it, and the original writer of said info, I will give the credit to the writing and the provider of said info.
Part 1: useful thread Post.
Part 2: Random tweaks from HOFO.
Part 3: Rom’s Touch it Wing 2.3
3a Touch-IT for The Wing Full and Lite Ed.
Part 4: Random Info
Part 5: T-Mo Wing RUU for USA
Updated on December 17 2007
Part 1: Useful Threads
Cab install for the Wing
The Following is from zcink @ XDA
Original thread @ http://forum.xda-developers.com/showthread.php?t=341867
Great Wing Info Thread
The following is from Nyer78 @ XDA
Original Thread @ http://forum.xda-developers.com/showthread.php?t=326655
General HTC Cabs
The Following is from patr!k @ XDA
Original thread @ http://forum.xda-developers.com/showthread.php?t=344533
Part 2 tweaks.
The Following is from – Tater_Tot24 @ Howard forums
Original thread @ http://www.howardforums.com/showthread.php?t=1215155
Please Note that some of these entries only apply to the WING.
Add Side Button Functionality:
1. Using a registry editor go to HKLM\Software\Microsoft\Shell\Keys
2. In Keys, create a new Key named "40C7".
3. Copy the contents of 40C5 to to 40C7.
4. Edit the "Name" value replacing the "4" with a "5" (5 is Voice command button).
5. Close the registry editor.
6. In Settings\Buttons you should see the new "Button 5(Hold)" entry. If not, soft reset.
Note: I had to make voice command the hold function and screentoggle the non hold function for it to work correctly.
Camera Settings:
1. Open the camera, so you can see images thru the camera lens.
2. Go to bottom of screen & click on the "Y" at far left side.
3. Now move to the 4th icon at the bottom, and set the resolution on "L" and the quality on Super Fine (not Basic).
4. Move to the next icon on the right, and set the Capture Mode on either "Burst" or "Sports"
5. Next, click the icon at far left and set your Capture Speed to either Moderate or Fast, and "Snapshots" to at least 3.
6. Click on the next icon on the right and set it on Storage Card.
7. Finally, click the "Sun" and set the White Balance on Auto.
8. Click OK in the upper right, and you're almost set. Just go now to far left of camera screen and click either of the tiny > arrows until you come to 1/3 (or 1/5 or 1/7 or 1/10, depending on how you set "Snapshots.")
9. Now you're set to take some really great pictures. They will be sharp & clear all the way from about 12 inches to infinity.
10. For sharper pictures, leave the setting at 1x. Anything else is a "Zoom" shot.
Enhanced File System Performance:
Registry: HKLM\System\StorageManager\FATFS
Key: CacheSize (dWord)
Default: 0 (I am not sure what this equates to, the valid values I know about are 4096, 8192, 16384)
New Value: 8192
Hide SIM Contacts:
Registry: HKCU\ControlPanel\Phone
Key: ShowSim (dWord)
Default: 1 (show)
New Value: 0 (hide)
Active Sync Running in the Background Fix:
1. Create a “Fake Server”
Configure Server Menu Activesync Programs 2.Go to Start
3. In the following screens you can enter any old garbage. It does not matter, but just in case your unsure, just type the following in the indicated boxes:
4. Server Address: fake / User name: fake / Password: fake / Domain: fake. Then you are finished creating the fake server
5. Finally, UNCHECK the box in the time zones tab in the phone settings (This may sound silly, but it works! I promise!!)
MyFavs Missed Call Fix:
Registry: \HKLM\Security\Phone\NoLog
Key: List
Action: REMOVE
Hard Reset Instructions:
1. Hold down both of the “soft buttons”
2. Perform a soft reset with the stylus while still holding down the buttons
3. Push the green phone button to confirm that you do want to do a hard reset
DeBrand the Phone:
1. Perform a Hard Reset (instructions listed below)
2. Phone cycles through format, installs WM6, then prompts you to config touch screen
3. Install finishes and loads WM6
4. Then a prompt appears warning that EXT ROM will install extra contents (don't install! poke the soft reset button before EXT ROM install)
5. Hit soft reset button when EXT ROM prompt appears, you have 3 seconds!
6. Power on like normal
Send Large MMS:
Registry: HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Size Limit
Key: wap2sendlimit1 (you can also change wap1sendlimit1)
Default: 307200
New Value: 1228800 (1200K)
Set the new value by going to Text/Multimedia --> Menu --> New --> MMS --> Menu --> Options --> MMS Options --> Servers --> T-mobile MMS
MMS Sending Issue Fix:
1. Due to incorrect Port setting for the MMS server, the phone may not be able to send MMS messages all the time.
2. Go to Text/Multimedia --> Menue --> New --> MMS --> Menu --> Options --> MMS Options --> Servers --> T-mobile MMS
3. Make sure the settings are set to: Gateway: 216.155.165.50 / Port Number: 8080 / Server: http://216.155.174.84/servlets/mms
Remap Soft Buttons:
For Calendar
Registry: HKCU\Software\Microsoft\Today\Keys\112
Key: Default
Default: Calendar
New Value: Internet (anything you want goes here)
Registry: HKCU\Software\Microsoft\Today\Keys\112
Key: Open
Default: HTCCalendar.exe
New Value: \Windows\iexplore.exe (again, anything you want goes here)
For Contacts
Registry: HKCU\Software\Microsoft\Today\Keys\113
Key: Default
Default: Contacts
New Value: (anything you want goes here)
Registry: HKCU\Software\Microsoft\Today\Keys\113
Key: Open
Default: \Windows\RSK\Contacts.lnk
New Value: (again, anything you want goes here)
Remove / Modify Startup Sound:
Registry: HKLM\SOFTWARE\HTC\StartupAnimation
Key: Enable (dWord)
Default: 1 (jingle on)
New Value: 0 (jingle off)
Registry: HKLM\SOFTWARE\HTC\StartupAnimation
Key: Volume (dWord)
Default: 127
New Values: 16 - 200
You can also modify the sound and animation by changing the WAV and GIF files in these two keys.
Registry: HKLM\SOFTWARE\HTC\StartupAnimation
Key: WAVFile (SZ String Value)
Default: \Windows\T-Mobile startup.wav
New Value: (whatever you want)
Registry: HKLM\SOFTWARE\HTC\StartupAnimation
Key: GIFFile (SZ String Value)
Default: \Windows\TMO_Startup.gif
New Value: (whatever you want)
Remove the Tray Icon from Today Screen:
Registry: \HKLM\init\
Key: Launch92
Action: DELETE
Note: If you want to keep some but not all of the icons:
Registry: HKLM\Software\HTC\TrayApplet
There you'll find listings for each icon (the folders are for the WinWap, MyFaves, and CommManager tray icons). Remove the ones you don't want and soft reset. If you remove the music player settings, you will then have to uncheck the plug-in from Today items.
Adding Slide Sounds:
1. First you are going to need two .wav files.
2. Once you have the two sounds that you want to use, Rename them to Slider3_in.wav and Slider3_out.wav and place them in the \Windows Folder on your phone.
3. Go to the Registry: HKLM\Software\HTC\SlidingSound\.
4. Once your there you should see 3 Folders (keys) that are labeled 0-2, and 2 Dword Files (ActiveSlidingSound and SlidingSoundEffect).
5. In that same directory, you need to make a new folder (key) and label it "3". Once that is made, you need to go inside that "3" which should be empty and have nothing inside.
6. Now you need to make a new String.Label the String "in" without quotes, and then set the string to "Slider3_in.wav". Now you should have one string inside folder (key) 3.
7. Now you need to make another String inside of folder (key) 3. Just follow step 5, but instead of using "in" use "out". So it should be labeled "out" and should be set to "Slider3_out.wav".
8. Next, create another String inside of folder and call it “Default” (no quotes). Now set that sting to whatever you want the new schema to be called (i.e. wind chimes, customer, etc).
9. Now head back to the registry: HKLM\Software\HTC\SlidingSound\, where you should now see folders (keys) 0-3 now and two Dwords files.
10. Now change Dword ActiveSlidingSound to 3, which is the new sound you created.
Disable the SMS Sent notification
Regisrty: HKLM\Software\Microsoft\Inbox\Settings\
Key: SMSNoSentMs (decimal)
Default: 0 (on)
New Value: 1 (off)
Note: Please note that the 'Settings' key may not exist in your device, and thus may have to be created first.