NEW ROM OS 5.2.1948 TouchFlo Edition RC3 for Atom Exec FIX UPDATED

[t.stratus]

The Rom Is Out of the world working absolutly fine but i found a problem that the screen tap is not working but the hardware tap is working fine i am very much used to screen tap sound so plz help me

[Brendo]

Start -> Settings
Sound and Notifications

Sounds work when ticked, and dont work when unticked. I'm not really sure what your problem is

[jychan28]

Abusalza, My AtomExec still have many many freezes, could you point me to a right direction to figure why.

Most of the freezes can be unlocked by turning power off and off. I have SPB software shell.

What registry tweak can make the touch screen more sensitive? It take a lot of pressure to get the cube appear. the number should go up or down? What is the recommended numbers?

[chaosz]

Still face these problems with the new ROM :

1 . when using headset , volume from caller very soft .
2. Can't write on notes.
3. Can't change sms tone aways vibrate when sms is received even though uncheck function.

[rorijam]

Hi, Would like to inform that A2DP Wireless Stereo is working with this rom and Jabra BT8010, the only minor problem appear when I stop playing music then the earphone became disabled for Media Player Audio (only freehands works) and I need to turned off-on again.
Also it takes like 15 seconds before receiving Audio in stereo.
So far the rom is working fast and fine, except for S2U2 wich became unstable since last update of S2U2.

[t.stratus]

Start -> Settings
Sound and Notifications

Sounds work when ticked, and dont work when unticked. I'm not really sure what your problem is

Thats what the problem is it !!!doesnt work i have checked that, ticked on Screen Taps (LOud and Soft ) tried both none works and have a few more issues using spb pocket plus and the close button doesnt work it always minimizes checked settings OK reinstalled resco as i use resco more often nogo.... reinstalled spb pocket plus ..nogo... used to work fine in wm5 oem help plz

[abusalza]

Thats what the problem is it !!!doesnt work i have checked that, ticked on Screen Taps (LOud and Soft ) tried both none works and have a few more issues using spb pocket plus and the close button doesnt work it always minimizes checked settings OK reinstalled resco as i use resco more often nogo.... reinstalled spb pocket plus ..nogo... used to work fine in wm5 oem help plz

I had problem with more spb software too. I assume this is caused by certificate issue. And i think the problem solve on N-Touch released:)

btw i have very limited connection and so i can't updated certificated for Touch Edition. If u want u can download N-Touch version. Sorry mate:o

[abusalza]

Abusalza, My AtomExec still have many many freezes, could you point me to a right direction to figure why.

Most of the freezes can be unlocked by turning power off and off. I have SPB software shell.

What registry tweak can make the touch screen more sensitive? It take a lot of pressure to get the cube appear. the number should go up or down? What is the recommended numbers?

If device freezes after u've installed spb software, This may same problem with certificate...
Read post #257

[Brendo]

All SPB software worked fine on my device...

[abusalza]

All SPB software worked fine on my device...

Yes, i had too. But some fitures disabled caused by certificates issue

[Brendo]

Yes, i had too. But some fitures disabled caused by certificates issue
ahh, yes like smart scrolling

[t.stratus]

ahh, yes like smart scrolling


Exactly Smart scrolling was also not working so downloading N-touch hope it is much faster as touchflow makes ur system slower and btw never liked it eitherways better option pointui but still spb pplus is better and more useful will let ull know how it feels and ofcourse any bugs :rolleyes: hold on guys and 1 more thing in this rom i tried to disable ftouchflo in the config but return an error ftouchflocongif.exe
unathorizedaccessexception so donno what it is though this app is useless for me :)

[abusalza]

Exactly Smart scrolling was also not working so downloading N-touch hope it is much faster as touchflow makes ur system slower and btw never liked it eitherways better option pointui but still spb pplus is better and more useful will let ull know how it feels and ofcourse any bugs :rolleyes: hold on guys and 1 more thing in this rom i tried to disable ftouchflo in the config but return an error ftouchflocongif.exe
unathorizedaccessexception so donno what it is though this app is useless for me :)

Yup, please feedback for N-Touch

[claven86]

abusalzar i wondering y after i upgrade the rom, y my transcriber cant use.. it did install but when i on it and write on the pad it doesn't show anythings. could u pls help me on this?

[abusalza]

abusalzar i wondering y after i upgrade the rom, y my transcriber cant use.. it did install but when i on it and write on the pad it doesn't show anythings. could u pls help me on this?

I had not problem with transcriber with rc3, and many peoples too:confused: If u want to have transcriber, please used N-Touch (http://forum.xda-developers.com/showthread.php?t=358873)
It's just my opinion, coz i didn't think to continues Touch version on a short time:o

[claven86]

I had not problem with transcriber with rc3, and many peoples too:confused: If u want to have transcriber, please used N-Touch (http://forum.xda-developers.com/showthread.php?t=358873)
It's just my opinion, coz i didn't think to continues Touch version on a short time:o

is there anyway to fix the transcriber besides changing the rom again... been spending so much of time on it... pls help me... really need the transcriber. when i write on the screen it just dun show anything i dunno y...

[abusalza]

is there anyway to fix the transcriber besides changing the rom again... been spending so much of time on it... pls help me... really need the transcriber. when i write on the screen it just dun show anything i dunno y...

Ok, maybe u have to hard reset your device and reinstalled transcriber to device memory. No other way if its still not working.
(my exec is not with my now, i can't tested to help u more)

[claven86]

Ok, maybe u have to hard reset your device and reinstalled transcriber to device memory. No other way if its still not working.
(my exec is not with my now, i can't tested to help u more)

ok, now i know more. let me tell u what im facing now. after i hard reset my pda, iafter install tracriber, the trancriber can be use, but since i install the touchflo and it required to soft reset the phone, after reset it the transcriber cant use anymore, it does show any error just that when u wrote something on the screen it does show anything. so what should i do know? u get some idea how to fix it?

[claven86]

and at the moment i hard reset for few times already just to try out the transcriber and now i dun dare to reset the phone.. lol hope someone encounter this and could help me, i dun 1 keep doing the setting again and again.. is really time wasting

[abusalza]

Yes... I'm forget it. i had edit some tweaks to make transcriber working with touchflo enabled. Plaese wait, i'll search on my pc about this tweak

[claven86]

Yes... I'm forget it. i had edit some tweaks to make transcriber working with touchflo enabled. Plaese wait, i'll search on my pc about this tweak

omg thanks god that u knew it, i accidentally pressed reset again and the transcriber not working again and im reseting again.. shit

[claven86]

another thing , i dunno how to enabled the front page, i mean on the themes it suppose to have time day date on the first row then come to , user operator, and so on..., but wm 5 it does have a upcoming task like on calander how do i enabled it on the front screen? i been finding for years...

[abusalza]

eeem. i'm not really, but last time i had transcriber working with touch enable w/o tweaking it. oh, my memory is stuck:o
I still searching cooking notes on my pc.

[abusalza]

another thing , i dunno how to enabled the front page, i mean on the themes it suppose to have time day date on the first row then come to , user operator, and so on..., but wm 5 it does have a upcoming task like on calander how do i enabled it on the front screen? i been finding for years...

maybe that u mean is today screen. Tap start - settings - personal tab - today
.... Oh, i'm not sure coz as u know my device is not with me:o

[claven86]

thats making me mad, i keep reseting the pda and keep installing all the things agian and again lol...pls help me find it out as soon as possible, how that u are free to do so, can i have ur msn pls? so that i dun need to wait here and talk to u so slow...

[claven86]

i knew it i knew it... when i enabled the touchflo the transcriber cannot work, if i disabled the touchflo the transcriber can work... so? can solve?

[abusalza]

try this, run touchflo conflig and add transcriber.exe as exclude program

[claven86]

??? how do i do that? can explain more detail? sorry im still noob in pda, this is my first phone jsut get it 3rd day... lol

[claven86]

okok i think i know what u mean by now

[claven86]

still cannot use i tried to exclude the transcriber.Exe already... when enalbed the touchflo cannot write anymore

[claven86]

1 more thing y in the first page the wm6 front page got so many short cut icon y i cant mange to find it out >.< and in my top start panel i cant enabled the battery bar.. anyone can tell me where to show it out?

[abusalza]

1 more thing y in the first page the wm6 front page got so many short cut icon y i cant mange to find it out >.< and in my top start panel i cant enabled the battery bar.. anyone can tell me where to show it out?

1. To edit "front page" (it's we known as today/ today plugins), tap start-settings-today-and tap item, u can select or deselect item to show on front page.
2. To have batery bar on top bar u can installed spb pocketplus (baterry bar will show on the middle of top bar), or edit the registry
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell]
"ShowTitleBarClock"=dword:1
baterry bar will show on the right corner of top bar.

[claven86]

the problem is when i open it it already show dword data is 1. :(

[Brendo]

Is someone able to extract icons and music today plugin?

[Brendo]

the problem is when i open it it already show dword data is 1. :(
Try this:

Hide/Show battery indicator in Task bar

If you wish to hide the battery indicator in the task bar on some devices, you can set:
HKLM\Services\Power\ShowIcon = 0 (DWORD decimal)

And to show:
HKLM\Services\Power\ShowIcon = 1 (DWORD decimal)

[ukshir]

Hi, Great work..... I just downloaded the RC3 ROM and installed it on my Atom EXEX but the touchflo feature is not working..when I do up-down or any gesture nothing happens..... can anyone tell me what is the problem? I am also not getting the Today screen as shown in the first post ...I am attaching herewith the Touchflo settings and TOday screen... can anyone help me in this regard??
69539695406954169542

[modicano]

hello i will say if camera goes!thanks

[tjkhattak61]

hello i will say if camera goes!thanks
Modicano, I don't know where ur camera is going but mine is right there in my Atom:p. It is working fine also if u mean that.

[fyrestrtr]

I have the O2 Xda Atom Exec, but the software says country mismatch or device mismatch?

[mikomarco]

is the A2dp working for this ROM RC3?