For ALL PEOPLE HOT FIX BLUETOOTH BY HTC

[private69]

Hello,


HTC have publied a HOT FIX FOR BLUETOOH

"/12/2007
Bluetooth Hot Fix (for HTC TyTN II)



Dropped calls sometimes occur when Bluetooth is on. If you encountered the same problem, please download this Bluetooth Hot Fix and install it on your device.



Go to htc club an enjoy.

[Nadavi]

Downloaded it from HTc.cOM


Installation instructions


Follow the instructions below to download and install the hot fix on your device:
Make sure you have Microsoft ActiveSync® installed on your Windows XP PC or Windows Mobile Device Center on your Windows Vista® PC. You can find Microsoft ActiveSync from this link or Windows Mobile Device Center from this link.
Connect and synchronize your device with your PC via Microsoft ActiveSync® or Windows Mobile Device Center using the USB cable.
To download thehot fix, first select the check box below. Next, select thehot fix and the desired FTP site then click Download.
Copy the hot fix, which is a cab file, to your device.
To install the hot fix, tap the cab file and follow the on-screen instructions.

Here is the file:
http://rapidshare.com/files/77588898/TyTNII_BT_Hotfix.zip

Enjoy,
Nadavi

[NguyenHuu]

for tytnII, but how about att tilt? is it rom specific?

[marco899]

Hope this will work. Thanks for the tip.

[Farsquidge]

Hello,


HTC have publied a HOT FIX FOR BLUETOOH

"/12/2007
Bluetooth Hot Fix (for HTC TyTN II)



Dropped calls sometimes occur when Bluetooth is on. If you encountered the same problem, please download this Bluetooth Hot Fix and install it on your device.



Go to htc club an enjoy.

This does not show up on the updates for my TyTynII (downloads are serial number specific) only in the generic downloads.

I think its best if you only apply this IF you suffer with any Bluetooth problem.

The old adage, 'If it ain't broke, don't fix it!' :)

[_Alex_]

In the HTC 1.56 ROM, this file is a replacement for \Windows\TIInit_4_2_38.bts a.k.a. (OEM\OEMDrivers\TIInit_4_2_38.bts for chefs). There is nothing else in that cab (see upgrading forums thread (http://forum.xda-developers.com/showthread.php?t=352931) for better description)

Edit: I was wondering if I kept quiet, how many people would have experienced a placebo effect and said that it works great and makes bluetooth 10x better on AT&T... :D

Summary

If you happen to be an AT&T Tilt user that has flashed to an HTC ROM, this fix will work for you. If you're running an AT&T ROM, or you have no idea what a ROM is, but you know your phone says AT&T on it, it does nothing. :D

[Subliminal Aura]

Does this fix the issue were bluetooth is dropped after finishing a call ?

[sirooga]

Thanks for letting us ATT users know that it doesn't do anything. Guess we don't have this issue :P But on a serious note does this actually fix anything besides a supposed call dropping? I don't have that issue but of course we all have tons of issues with BT quality.

[Arlop]

I have install the update listed above on a Tilt running the RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88. 07_1.27.12.11_Ship Rom and the Bluetooth quality has jumped 100%. My Bluetooth stereo headphones sound great.

Thanks for starting this thread.

[laakness]

Awesome, thanks! I was going to ask if anyone had drop call problems as it happened to me twice last night and I happened to have my BT headset on :)

[kaluzu]

Thanks for letting us ATT users know that it doesn't do anything. Guess we don't have this issue :P But on a serious note does this actually fix anything besides a supposed call dropping? I don't have that issue but of course we all have tons of issues with BT quality.

I have a lot of crackling background on my BT headset. Did not have that on the 8525. Also, there seems to be less functionality supported in the Tilt implementations, regarding the BT, vs the 8525 (I was running a cooked ROM though on my 8525). What i mean by that, is that I was able to use the BT buton to activate the voice dial using the MS VM. In addition, hitting the BT button twice was getting me a redial. Not anymore. I wonder is this has to do with the AT&T ROM or not? Is this a genuine HTC issue?

[mfrazzz]

I have a lot of crackling background on my BT headset. Did not have that on the 8525. Also, there seems to be less functionality supported in the Tilt implementations, regarding the BT, vs the 8525 (I was running a cooked ROM though on my 8525). What i mean by that, is that I was able to use the BT buton to activate the voice dial using the MS VM. In addition, hitting the BT button twice was getting me a redial. Not anymore. I wonder is this has to do with the AT&T ROM or not? Is this a genuine HTC issue?
Before I switched to Dutty's ROMs, I was running the stock Tilt Rom for a few days, and then the newer Tilt ROM for a week. Both of those AT&T Tilt Stock roms gave me no issues like you mentioned. I heavily use my BT headset (Jawbone), and use Microsoft Voice Command (I very seldom use the dialer as its easier to just speak and have the phone dial for me). Pressing once on my headset would always bring up MS VC so I could issue it commands, and pressing twice on my headset always did a redial.

Now that I'm on Dutty's 7b, I have the same behaviors there too. Not sure what to tell you (other than some BT headsets don't work well with WM6, but if you were using the same headset on your 8525 then thats probably not the case).

As always... YMMV

[akadonny]

This file does not exist in the AT&T Tilt ROM, so it's doubtful it will harm or help to install this.

I checked the AT&T's 1.60.502.3 rom and it does exist. I didn't check the stock AT&T rom so I don't know if it wasn't there. I did a file comparison with ExamDiff between HTC's fix (22,490 bytes), AT&T's 1.60.502.3 version (22,490 bytes) and HTC's 1.56.405.5 version (23,899 bytes). It appears AT&T's newest rom already has the fix so anyone using the following roms should not have to apply the fix:

AT&T stock 1.60.502.3
Kyphur's XDA Live
Dutty's AT&T Variants
Custel's Series
_Alex_'s 1.60
any of DK's roms (shameless plug)

[jgermuga]

Is rapidshare the only place to get this? I am behind a firewall.

[akadonny]

Is rapidshare the only place to get this? I am behind a firewall.

Cab fix attached.

[_Alex_]

I checked the AT&T's 1.60.502.3 rom and it does exist. I didn't check the stock AT&T rom so I don't know if it wasn't there. I did a file comparison with ExamDiff between HTC's fix (22,490 bytes), AT&T's 1.60.502.3 version (22,490 bytes) and HTC's 1.56.405.5 version (23,899 bytes). It appears AT&T's newest rom already has the fix so anyone using the following roms should not have to apply the fix:

AT&T stock 1.60.502.3
Kyphur's XDA Live
Dutty's AT&T Variants
Custel's Series
_Alex_'s 1.60
any of DK's roms (shameless plug)

Just realized this while doing some diffs and was going to repost. (Microsoft file find sux :D) Original post edited...

[laakness]

Before I switched to Dutty's ROMs, I was running the stock Tilt Rom for a few days, and then the newer Tilt ROM for a week. Both of those AT&T Tilt Stock roms gave me no issues like you mentioned. I heavily use my BT headset (Jawbone), and use Microsoft Voice Command (I very seldom use the dialer as its easier to just speak and have the phone dial for me). Pressing once on my headset would always bring up MS VC so I could issue it commands, and pressing twice on my headset always did a redial.

Now that I'm on Dutty's 7b, I have the same behaviors there too. Not sure what to tell you (other than some BT headsets don't work well with WM6, but if you were using the same headset on your 8525 then thats probably not the case).

As always... YMMV

Give this a read. I have MS VC 1.6 working just fine on my Jabra BT250 after following the instructions.

you can ignore the first part about removeing the cybertron dialer or whatever.

http://forum.xda-developers.com/showpost.php?p=998205&postcount=9

[kaluzu]

I'll try it. Thx for the tip. I am not sure if this only works for 8525/TyTn (I do have the TyTn II/Kaiser)

Edit:
Tried. Sorry, did not work. Oh well. will see, but for now I wil stick with the AT&T ROM.

[invasion13]

Hi,
there is something weird about that fix:
when the cab is on the kaiser, you tap on the file to install it.
you believe it's installed but in program files , you may find
a "kai6492_hotfix" shortcut, you tap on it and the choices are install or exit
it's seems there an identity check to be sure it's on a kaiser
"module id is kais(required kais)"
then if "equal" "ok" then install
and soft reset needed
why two install required ?
the kai6492_hotfix is still in program files after that
and last VC1.6 was working on my bt headset(but the voice recognition succeded about only 10%,i think because of audio quality when i am speaking) but i could ear vc1.6 replies ou questions)
now it is not working anymore.
when i click on the button(headset) before it was launching voice command as the harware button (assigned to it) could do it
now the same button launches the phone dialer(as i was tapping on "call"(green phone)).

ps; since that hotfix, i haven't been able, any more, to install btIO-0.6-wm5 cab

[Farsquidge]

Deleted cause not worth it....