PDA

View Full Version : after ROM upgrade I see just RGB screen, no connection and hard/soft reset dosnt help


TiLK1
21-12-2007, 12:13 AM
Hi.

I was running on Crystal V4, now I decided to upgrade to Crystal V5. Without knowing about new WM6 upgrade method, I downloaded tha package with Crystal V5 and run the ROMUpdateUtility_NV_G4.exe, which was included. After that I learnt that I cant run EnterBootloader.exe, so I searched forum and learnt about new way to upgrade. It would be fine, but I came a cross with a problem I didnt expect. After I finished flashing with ROMUpdateUtility_NV_G4.exe, I see just red, gree, blue and while line on my phone + SPL number and writing USB on the bottom.

Now ROMUpdateUtility_NV_G4.exe or HardSPL.bat are saying that no deviace is connected and I cant do anything else!!! It means there is no change after soft reset, no change after hard reset. Still the same schreen on the phone and message on PC: "no deviace connected"

What am I supposed to do??

When I removed the USB cable and pluged it into different port, WinXP says that it found an PocketPC deviace. So the connction should be established.

- This thread was in Crystal V5 thread first but I decided it would be better to create a new one.

ka724ka
21-12-2007, 12:26 AM
Did you try reset you device by holding 'Camera'+'Wireless' buttons? Once it gets into bootloader mode, attached the devcie to PC again and run the ROMUpdateUtility_NV_G4.exe. It sometimes help...

TiLK1
21-12-2007, 12:29 AM
Yes, I tried it a few times. Now Im downloading RUU_Prophet_220734_2207114_024721_NVID.exe and praying it could help...

TiLK1
21-12-2007, 12:45 AM
Yahooooo...

It seems God exists, I flashed into WM5 now.

Anyway, Im still unable to run HardSLP.bat (it says system cant run some file...)

TiLK1
21-12-2007, 02:08 AM
I wasnt able to run it cause I was trying to do that while I had wellcome screen on the phone. It is necessary to manualy allow HardSLP.bat to run a file on the phone, thats why phone has to be running and prepared.

My problem was that I flashed Crystal V5 without doing HardSLP, thats why it didnt work. The RBG screen I saw was actualy bootloader.

fantom2007
22-12-2007, 04:07 AM
I have same problem like you too. But i have G3 device and i used
RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_S hip to solve it

I'm not success with HardSPL to update WM6 rom.