How to flash with minisd?

[flip0406]

How do i flash a rom onto my p4300??? i dont know how to get into bootloader mode on this device please help me.

[papamopps]

How do i flash a rom onto my p4300??? i dont know how to get into bootloader mode on this device please help me.

bootloader = camera + softreset

and flshing from sd - never worked for me :)

[flip0406]

ok...well can i flash from my usb or whatever???if so do you know where i can get a compatible version for my p4300/wizard.

[kree]

for those of us with mac's and non windows desktops<it would be nice to have a wayto flash from minisd! I can only remember how easy it was back when I used my zaurus 5500.

[jappo01]

Please use the search function because I know 4 sure it is described in these forum, since I have done it myselves.

But once again:

1 BackUp your Herald (if possible)
2 Format your micro-sd card with FAT32
3 Unpack the .nbh file of the Rom you want to use if needed
4 Rename the .nbh file to Heraimg.nbh and place this file, and only this file onto your micro-sd card.
5 Place the micro-sd card in your Herald
6 Put the Herald in bootloader-modus by pressing simultanious camera- and comm. manager button and performing a softreset. Keep pressing both buttons until the bootlaoderscreen appears.
7 Your screen will display the instructions to press the key on the left side of your device (slide the volumebar down)
8 Follow the instructions as displayed.
9 After flashing perform a hard reset as prompted!
10 Tada

But; before flashing by micro-sd:
- Make sure your device is fully charged
- Flashing is always on your own risk and neither I or anyone else can be held responsibl if anything goes wrong

This methode cab also be used when unbricking your device if no pc-connection is possible/available

[laseru]

Please use the search function because I know 4 sure it is described in these forum, since I have done it myselves.

But once again:

1 BackUp your Herald (if possible)
2 Format your micro-sd card with FAT32
3 Unpack the .nbh file of the Rom you want to use if needed
4 Rename the .nbh file to Heraimg.nbh and place this file, and only this file onto your micro-sd card.
5 Place the micro-sd card in your Herald
6 Put the Herald in bootloader-modus by pressing simultanious camera- and comm. manager button and performing a softreset. Keep pressing both buttons until the bootlaoderscreen appears.
7 Your screen will display the instructions to press the key on the left side of your device (slide the volumebar down)
8 Follow the instructions as displayed.
9 After flashing perform a hard reset as prompted!
10 Tada

But; before flashing by micro-sd:
- Make sure your device is fully charged
- Flashing is always on your own risk and neither I or anyone else can be held responsibl if anything goes wrong

This methode cab also be used when unbricking your device if no pc-connection is possible/available

for me dowsn't wotk!

[ivanmmj]

Errrr..... wrong thread... lol

[jappo01]

With some fantasy I interpreted your post as "for me this method did not work"

If it didn't work, you screwed up somewhere...but no need to worry...what exactly didn't work?

In your future post please do not only mention something doesn't work but include which part didn't work and what went wrong.