HEELP!! After Bepe flash, Device doesnt boot!

[AbuBakr]

Hello!

I have a big problem! i need very fast help! I tried to flash bepe rom 0.80 and it was a fatal error, after I tried to boot my device, it doesnt start it stoped by startscreen "by bepe".

i cant do anythin, can anybody help me?

[jamesbest77]

Hi,

First thing to do is stop panicking and breathe. There are many things you can do to restore the functions of your phone and I'm sure this community will gladly help you.

The first think I can suggest is putting your phone into bootloader mode, then try reflashing the rom or a different rom. Instructions on how to enter bootloader can be found here (http://wiki.xda-developers.com/index.php?pagename=Trinity_Resets).

May I ask, have you Hard-SPL'd your device?

James.

[AbuBakr]

:confused: I tried all the things but nothing is going, i removed the battery etc. but it stocks by "by bepe", and i cant install an other rom, pleaaasseee HELP me!!!

Thanks!

[jamesbest77]

:confused: I tried all the things but nothing is going, i removed the battery etc. but it stocks by "by bepe", and i cant install an other rom, pleaaasseee HELP me!!!

Thanks!

Which "all things" did you try? You will have to explain clearly what you have tried, and exactly what the result was, otherwise we'll never be able to make any progress. You also didn't answer my first question: Did you flash your phone with Hard-SPL?

I'm not entirely convinced you've successfully followed the instructions on entering the bootloader. Here's what you do,

1. Turn on your phone, and let it boot as far as it can.
2. Press and hold down the power button and the camera button simultaneously. Do *not* let go of these two buttons!
3. Take the stylus and insert it in the reset hole (still holding down the two buttons).
4. Wait, and you should find yourself in the bootloader.

If this works, you should be able to flash a new rom while the phone is in this mode.

[digitalfreeze]

*Covered by previous post*

id3e la rabbak.

[AbuBakr]

When I try to flash it comes: [270] Update Error

*The image file is corrupted*, :( :'(


sorry for my english

[digitalfreeze]

perhaps it is corrupted. Have you tried to download it again?

[Talkrabb]

I tried to flash bepe rom 0.80 and it was a fatal error...

Where did you find Bepe V 0.80?

[AbuBakr]

Im sorry, I would like to say "0.79", it was a Mistake!

Knows any body where i can find the USPL for Trinity?

[AbuBakr]

I descripe my problem in German an English:

Also, ich habe ein XPA 1510 von Swisscom bzw. ein HTC p3600. Ich habe versucht das bepe rom drauf zu schmeissen und nachdem 4% verstrichen sind kam ein Error. Das Gerät ist neugestartet und es blieb beim Screen "by bepe" hängen. Nun habe ich wieder versucht ein ROM drauf zu flashen und bei jedem ROM hängt er bei 1% startet wieder neu und beim PC zeigt es die Meldung "Error 270" "...corrupted image file". Ich habe noch das tool mtty.exe versucht doch geht auch nicht, vielleicht habe ich es einfach falsch benutzt. Man könnte mir gerne eine Anleitung geben. ICH VERZWEIFLE NOCH!!!! BITTE HELFEN!!!

And now i'll try to descripe my problem in English: I've a XPA 1510 from Swisscom its like the HTC p3600! And i flashed the bepe ROM, but after 4% it stoped with an error, and after the Error my Device would like to reboot but it stocks by the Screen "by BEPE". I tried to flash other ROMs but all they stoped by 1% and it comes an Error 270 "The image file is corrupted". I tried the mtty.exe tool but it doesnt help, its possible that i used the tool not correct, have anybody an user manual? Its to infuriatingly!!! PLEASE HELP ME!!! I need my Phone!!!


Here is my e-mail: ilir_rudaj@hotmail.com

[nelson oliveira]

I'm getting EXACTLY the same thing :(
I've already did:
- The "Send to restore" thing...
- Enter in the Bootloader mode...
- Try to install a new ROM

I always get the same error at 1%...
I really hope you to help me...

I've already tried with 3 different ROM's i've downloaded here and get always the same error...
Even with ROM's that i've working with before this error...

So...
I believe the problem is not in the files...

[Alep]

Try to restore an original rom from your P3600 manufacturer/reseller/GSM Provider. It solved my "old" same problem.

Cya

[AbuBakr]

The Problem is, for my device doesnt exists an Original ROM, i have XPA 1510. When I try to Flash the original from p3600 then comes an Error 294.

HEEEELPP!!!

[nelson oliveira]

Well...

Good news here...
I've downloaded the Original Rom (WM5-PT) and the installation ran successfully...
Then i tried again with a cooked rom and...all things went good...

Thanks a lot for all your help guys ;)

[sapateira]

PLEASE HELP! Here's what happened. I had an unlocked phone and changed ROM to a ROM cooked by BEPE and no problem. Then i thought that i was realy smart i tried to cook a ROM myself, but when i flashed it it bricked my phone. It doesn't boot (hangs in splash screen) and when i try to install another ROM kees sayins "ERROR 207" (Stoping the upgrade at 1%).

I already tyried the all Olipro SPL's but they all hang at 100% returning the 207 error.

Also tryed the MTTY method and nothing. Task 28, task 32, info 8, etc... and the funny is that when i enter the commans TASK 32 it returns FF ( FF is for locked phones ) which is very strage cause it was unlocked the first time.
And now is locked???

There's some sense here cause when i try the Lasagna ROM (ANDONLY WITH LASAGNA SO FAR) it cancels the UPGRADE returnin INVALID VENDOR ID...

The problem is that every unlocker i know only work with the phone booted.

Can anyone tell me how to remove VENDOR ID from a ROM and make it NVID? Maybe the solution to my problem's here.

About that PORTUGUESE WM5 ROM??? Where did you get it? I've searched it everywhere and can't find it.

[fktsndr]

PLEASE HELP! Here's what happened. I had an unlocked phone and changed ROM to a ROM cooked by BEPE and no problem. Then i thought that i was realy smart i tried to cook a ROM myself, but when i flashed it it bricked my phone. It doesn't boot (hangs in splash screen) and when i try to install another ROM kees sayins "ERROR 207" (Stoping the upgrade at 1%).

I already tyried the all Olipro SPL's but they all hang at 100% returning the 207 error.

Also tryed the MTTY method and nothing. Task 28, task 32, info 8, etc... and the funny is that when i enter the commans TASK 32 it returns FF ( FF is for locked phones ) which is very strage cause it was unlocked the first time.
And now is locked???

There's some sense here cause when i try the Lasagna ROM (ANDONLY WITH LASAGNA SO FAR) it cancels the UPGRADE returnin INVALID VENDOR ID...

The problem is that every unlocker i know only work with the phone booted.

Can anyone tell me how to remove VENDOR ID from a ROM and make it NVID? Maybe the solution to my problem's here.

About that PORTUGUESE WM5 ROM??? Where did you get it? I've searched it everywhere and can't find it.

Unbrick device:

http://forum.xda-developers.com/showthread.php?t=308691

PTG wm5 rom:

http://forum.xda-developers.com/showthread.php?t=344360

Good luck!

[sapateira]

Unbrick device:

http://forum.xda-developers.com/showthread.php?t=308691

PTG wm5 rom:

http://forum.xda-developers.com/showthread.php?t=344360

Good luck!

Thanks about the tip, but didn't work.
Still... the PTG wm5 ROM returned an Invalid Vendor ID error instead of the usual 270 error.
I belive my way out will be transforming this ROM into a NVID rom! Does anyone know how to do it?

[sapateira]

Thanks about the tip, but didn't work.
Still... the PTG wm5 ROM returned an Invalid Vendor ID error instead of the usual 270 error.
I belive my way out will be transforming this ROM into a NVID rom! Does anyone know how to do it?

That unbrick software end up working after all, but only the .NET version in WDATA Mode. The windows version wasn't woking. Couln't load the PT Rom because of the Vendor ID, but the i tried the BEPE again and all went well, now it's booted and is time to unlock it (AGAIN?!)

THANK YOU ALL