Need help with Tri-color screen!

[seree86]

Every time I run the Kaiser hard-spl, I get a bad command message as pasted in bold below. What am I doing run? I've been downloading and installing for weeks. I'm new to all this ROM stuff, but if it matters, my ROM version is 1.57.502.2 and ROM date is 08/25/07. Thanks in advance.

---------------------------------------------------------------------------

Kaiser JumpSPL is running on your device, please check your device
screen and follow the steps until you see the tri-color screen.
When done hit ENTER to continue...

Device screen should be now TRI-COLOR and show "USB"
===> PLEASE UNPLUG AND RE-PLUG THE USB CABLE NOW <===
===> PLEASE UNPLUG AND RE-PLUG THE USB CABLE NOW <===
===> PLEASE UNPLUG AND RE-PLUG THE USB CABLE NOW <===
ActiveSync icon should become gray after that.
When done hit ENTER to continue...

Phone screen should now be tri-color and the activesync icon gray
if not, the loading process has failed and you'll have to repeat it again.

If all was OK hit ENTER and the standard "PDA Phone ROM Update Utility"
window will start, allowing you to flash HardSPL on your device.

Hit CTRL+C to Cancel or ENTER to continue...

Follow the steps on the wizard to flash HardSPL, when finished your
device will reboot. It should last no more than 1 minute.
- Launching RUU, please wait...Bad command or file name


Process is finished, congratulations!
If you find it useful don't forget to donate :)

[ecltech]

When I tried HardSPL I had a similar problem. My issue was that I configured the command prompt to automatically change directory to the root drive each time a CMD process is started and this caused the problem I as having. Most likely when you run the tool it's extracting files to a different directory. If that's the case verify you're not doing anything with a autostart registry key for CMD process. You can also look at the folder you run HardSPL from... when you run the command it should extract a few files and if that's not happening then you will get the above error.

I would also try this on another workstation/laptop if you have one available.

[seree86]

I'm sorry to take up your time, but can you please give me a step by step example of how this could be done? How did you do it for your phone? I will try to follow.

[mofoliar]

you guys need to check out the White screen Solved post.. there is a fix so you can flash rom's.. merry christmas!