dizzy33
27-12-2007, 11:38 AM
Hello, I was searching for a leather case for my Kaiser for two months now.
Here is what I expected from my case :
1) - I wanted my screen protected with something hard.
2) - the case should let me answer the phone without removing anything.
3) - it should let me open the keyboard without removing the whole case.
4) - I didn't want any plastic thing covering my keyboard once the keyboard is opened.
And I found the perfect case that match my wishes !
Well, I said "perfect" ? Let's see ...
The case is the Designio leather case, here it is :
http://hiboox.com/lang-fr/image.php?img=1cbkyx2b.jpg
Lets' check if it really match my wishes ...
1) - the protective "door" for the screen is really hard, yes, it will really protect my screen. Also, the closure of the door is very good : there is a magnet in the leather case, so the door open/close very easily and remains closed in the pocket (attracted by the magnet). So this protective "door" for the screen is a very good point !
2) - you can easily answer the phone while the case is closed. When your phone rings, nothing to do except pushing the green button. All the buttons around the pad still have a good access with this case. New good point !
3) & 4) - to open the keyboard, I need, this time, to remove the whole upper side of the case. I didn't expected something better, I think we just can't do anything better than this. The keyboard opens very easily here again, the leather is very well adjusted, nothing touch the screen while you let it slide to see the keyboard. Once the keyboard is opened, nothing covers it so the keys are very easy to access and keep their original typing comfort. Again, good point !
But all isn't good ... Now the bad points ...
- When you power off your device, if the upper side of the case is opened, while pressing the power button the Kaiser "pop up" from case, it's very dangerous, it could just drop from the case. So you need to take your Kaiser in both hands to power it off, or close the upper side of the case before.
- Some buttons are a little hard to access. The side "OK" button is partially covered (just a little) by the leather. So it's sometimes hard to press it.
- The hole made for the stylus should be in a higher position. So it is also hard to remove the stylus. The good side of this is that it will now be harder to lose the stylus ! ;)
- The hole made for the power button is not big enough, you need to press the hole very strong to touch the button, or you can use your nail as the button access will then be easier, but I hate this.
- The size : to have two leather layers on the screen is very protective but takes of course more room in your pocket. I think the Kaiser, in this case, is about 1cm bigger (from the side view). I will let people convert it into inches if they need !
- Last but not least : I have a problem with my case, the first cover of the screen (the one around the screen, not the "door" wich covers the whole screen) is not well made. The button (in french we say "pressure button", I don't know what's the english word for this) wich let it close is not at the right place. So when I close it, it's a little down, covering a little part of my screen (the bottom right). It's not a very big issue because it's only covering a very little part the screen (I'd say about 2mm), but this sucks anyway. If only they had put this button just 1 mm higher, the protective leather part would perfectly fit the screen. These days, I'm focusing on this problem and it makes me angry ! :mad:
Is this problem specific to my case ? I'm not sure ... When I look at some shots of this case on the web, sometimes I can see the same problem on the commercial shot ! There may be a way to fix this problem, I'm working on that, but I don't want to cut the leather, that's the hard thing to think about.
Conclusion :
This case does its job : to protect your Kaiser. I have no doubt about this, the only thing wich is not covered is the pad and its buttons. Some buttons should have a better access, but they are still accessible.
The finish is very good, it could be a high price product ...
I think it's worth the price, of course depending on where you buy it. I bought mine in a Hong Kong shop on Ebay. The price was about 15€, shipping included. I waited for it for 3 weeks, so be patient !
I just hope for you, if you buy it, that you will not have the issue I had with the "pressure button" wich is not at the exact place it should be... Just one millimeter higher and it would just be perfect !!!
Here is what I expected from my case :
1) - I wanted my screen protected with something hard.
2) - the case should let me answer the phone without removing anything.
3) - it should let me open the keyboard without removing the whole case.
4) - I didn't want any plastic thing covering my keyboard once the keyboard is opened.
And I found the perfect case that match my wishes !
Well, I said "perfect" ? Let's see ...
The case is the Designio leather case, here it is :
http://hiboox.com/lang-fr/image.php?img=1cbkyx2b.jpg
Lets' check if it really match my wishes ...
1) - the protective "door" for the screen is really hard, yes, it will really protect my screen. Also, the closure of the door is very good : there is a magnet in the leather case, so the door open/close very easily and remains closed in the pocket (attracted by the magnet). So this protective "door" for the screen is a very good point !
2) - you can easily answer the phone while the case is closed. When your phone rings, nothing to do except pushing the green button. All the buttons around the pad still have a good access with this case. New good point !
3) & 4) - to open the keyboard, I need, this time, to remove the whole upper side of the case. I didn't expected something better, I think we just can't do anything better than this. The keyboard opens very easily here again, the leather is very well adjusted, nothing touch the screen while you let it slide to see the keyboard. Once the keyboard is opened, nothing covers it so the keys are very easy to access and keep their original typing comfort. Again, good point !
But all isn't good ... Now the bad points ...
- When you power off your device, if the upper side of the case is opened, while pressing the power button the Kaiser "pop up" from case, it's very dangerous, it could just drop from the case. So you need to take your Kaiser in both hands to power it off, or close the upper side of the case before.
- Some buttons are a little hard to access. The side "OK" button is partially covered (just a little) by the leather. So it's sometimes hard to press it.
- The hole made for the stylus should be in a higher position. So it is also hard to remove the stylus. The good side of this is that it will now be harder to lose the stylus ! ;)
- The hole made for the power button is not big enough, you need to press the hole very strong to touch the button, or you can use your nail as the button access will then be easier, but I hate this.
- The size : to have two leather layers on the screen is very protective but takes of course more room in your pocket. I think the Kaiser, in this case, is about 1cm bigger (from the side view). I will let people convert it into inches if they need !
- Last but not least : I have a problem with my case, the first cover of the screen (the one around the screen, not the "door" wich covers the whole screen) is not well made. The button (in french we say "pressure button", I don't know what's the english word for this) wich let it close is not at the right place. So when I close it, it's a little down, covering a little part of my screen (the bottom right). It's not a very big issue because it's only covering a very little part the screen (I'd say about 2mm), but this sucks anyway. If only they had put this button just 1 mm higher, the protective leather part would perfectly fit the screen. These days, I'm focusing on this problem and it makes me angry ! :mad:
Is this problem specific to my case ? I'm not sure ... When I look at some shots of this case on the web, sometimes I can see the same problem on the commercial shot ! There may be a way to fix this problem, I'm working on that, but I don't want to cut the leather, that's the hard thing to think about.
Conclusion :
This case does its job : to protect your Kaiser. I have no doubt about this, the only thing wich is not covered is the pad and its buttons. Some buttons should have a better access, but they are still accessible.
The finish is very good, it could be a high price product ...
I think it's worth the price, of course depending on where you buy it. I bought mine in a Hong Kong shop on Ebay. The price was about 15€, shipping included. I waited for it for 3 weeks, so be patient !
I just hope for you, if you buy it, that you will not have the issue I had with the "pressure button" wich is not at the exact place it should be... Just one millimeter higher and it would just be perfect !!!