[APP] Srs Wow Hd

[violentz313]

any info on this working with omjs 6.1 verizon 3.02.02?

[mascian]

Sry guy,
I have a Samsung i780; Srs Wow Hd install is ok after regedit mod:

"If it doesn't work after having installed then softreset try the tip of ga!nusha:
"in order to make this wonderfull software work on every ppc you first need to check what is in [HKEY_LOCAL_MACHINE \ Drivers \ BuiltIn \ WaveDev] "DLL" and after install replace [HKEY_LOCAL_MACHINE \ Drivers \ BuiltIn \ WaveDev] "Old driver" with what was in "DLL" before install"

The problem is the audio effects...not there are...

Any idea?
Thx.

P.S. Sry for my bad english...

[mascian]

Ok, I solved the problem with regedit mod (Samsung i780); here the cab and regedit file.

Bye.

[ilordvader]

Ok, I solved the problem with regedit mod (Samsung i780); here the cab and regedit file.

Bye.

will this work on any ppc
i have a Att tilt

[mascian]

Hi ilordvader,
the regedit files is tweaked by me for i780 only (don't know for other device).

[sanketa]

Hi all,
I have a simple requirement. My WM6 PDA volume for Incoming Call is very low even when I set it to the loudest. Will this utility - SRS WOW HD - help me boost the volume level?
Thanks in advance.

[dan0zone]

why are u guys using the srs in the first post i posted the ppc and smartphone versions that work on wm 6 and 6.1 here once !!!! please read the post....do a search like i did thats how i found it

[thehelios]

Ok, after you install SRS WOW HD and then change the DLL in the registry to the old one, you get sound (that's if you didn't have sound before.)

Can I just point out the obvious and say that by doing that, you're not using the SRS sound driver, but your old one? If you really know audio, and you play with the SRS settings, you will notice that NOTHING changes. Why you ask? Because you're not using the SRS WOW HD .DLL FILE! You are using the old dll which brings the same exact audio quality as before the install.

Can someone please remove that as a "fix" because it's not a fix, it just reroutes your audio through the old DLL causing no difference in audio except a placibo effect in some.

[homer285]

:confused::rolleyes:
HI guy,

Should I do the same for my Samsung SGH-i900 WM6.1. After I load SRS WOWHD i had the same error, and I did try the steps to install SRS than soft reset than run the Wavedev.reg zip file but still no sound. May be is bcos I don't know hoe to do Reg edit, can someone teach me step by step in the wavedev.dll reg edit part? thank you all.
Did you manage to get it working? I have same problem, tries changing registy to no avail.

[jantshi]

I think lots of those who listen to music with their pocket pc will like it

Just copy on the pocket pc and install on main memory. Don't forget to Soft reset after installing.

It works well on my HTC TOUCH

If it doesn't work after having installed then softreset try the tip of ga!nusha:
"in order to make this wonderfull software work on every ppc you first need to check what is in [HKEY_LOCAL_MACHINE \ Drivers \ BuiltIn \ WaveDev] "DLL" and after install replace [HKEY_LOCAL_MACHINE \ Drivers \ BuiltIn \ WaveDev] "Old driver" with what was in "DLL" before install

work on my mio"

OR use that taken from the pda4x forum:
After install SRS WOW, reset, then install this reg(unzip the wavedev.zip attached), and reset...
Now you can use SRS WOW HD, really Great Apps...


Download link : http://forum.xda-developers.com/attachment.php?attachmentid=77865&d=1206612566
Hi, I,m using srs wow hd on tytn II WM6.1 it so nicely best sound many thanks. from NJ, in South Africa.

[shahriar5252]

I made a cab files because in the old cab a few registry key where missing (BtA2dpSnd) and the dll wasn't set to self register. i corrected this for 1.21 and 1.28. Installed 1.21 on my trinity and is working fine. didn't try 1.28

Regards, Arjan


I installed the 1.21 cab on my Mogul, but I got no sound even after soft resetting. I went to the the SRS menu and clicked on enable to no avail. I have the Mogul with WM 6.1 ROM update. I have tried the different versions of the SRS, but none is good. The original version from freepcware.com that I installed kept saying something like driver not loaded. The cab that you put together does not have the driver error of the original version, but still no sound comes from anywhere. Any advice? Thanks.

Shahriar

[neophyte.vii]

The other day I contacted SRS Labs and reported the issue. They got back to me pretty fast, and I was told the issue would be forwarded to marketing.

If enough people chime in, perhaps they will take notice and release an update?

http://www.srslabs.com/

[j venkateswar rao]

it worked on o2 zinc wm6 after registry change. it decreased my speaker and headfone volume with the srs in off mode.and when i put it to on the volume increases but not much difference compared to before installing srs. the only gud part was that a movie of mp4 format started playing louder. i uninstalled it because i listen to Mp3s more. anyone know anyway to make this progrm useful? also does anyone know how to increase my o2 zinc volume by reg edit or ...... its nt loud enough.

i too have o2 zinc can let me know how to install srs..thanks

[kweng_ca]

does this work for bt audio as well?

[Kicken]

After many rom flashes and it not working with 6.1 due to it shutting the sound off as well as giving me a voice command error. i opened up total commander and replace [HKEY_LOCAL_MACHINE \ Drivers \ BuiltIn \ WaveDev \Dll [REMOVE LONG GARBAGE] -->replace with [wavedev.dll]

Soft reset , go to settings and enable voice command, and enjoy SRS . hope this helps!

Kicken

[dunebuggydude11]

After many rom flashes and it not working with 6.1 due to it shutting the sound off as well as giving me a voice command error. i opened up total commander and replace [HKEY_LOCAL_MACHINE \ Drivers \ BuiltIn \ WaveDev \Dll [REMOVE LONG GARBAGE] -->replace with [wavedev.dll]

Soft reset , go to settings and enable voice command, and enjoy SRS . hope this helps!

Kicken

lol. can you please explain what you mean by "voice command" and why that has anything to do with srs? thx. i really want srs wow hd back!

[derekwilkinson]

After many rom flashes and it not working with 6.1 due to it shutting the sound off as well as giving me a voice command error. i opened up total commander and replace [HKEY_LOCAL_MACHINE \ Drivers \ BuiltIn \ WaveDev \Dll [REMOVE LONG GARBAGE] -->replace with [wavedev.dll]

Soft reset , go to settings and enable voice command, and enjoy SRS . hope this helps!

Kicken

I've done this and have sound, but no SRS effect. :(

[Kicken]

I've done this and have sound, but no SRS effect. :(

go to Start -> Settings ->System -> WOW and make sure you have it enabled.

[derekwilkinson]

go to Start -> Settings ->System -> WOW and make sure you have it enabled.

It is enabled, and still not doing anything. I tried putting Bass all the way up to make it noticeable if it were working, but it's not.

[yuwan]

Doesn't work on my i-Mate ULTIMATE 9502. After install,soft reset then stuck on i-Mate blue logo... Have to hard reset after that.. :(

I'm running WM6.1 Official ROM.

Any suggestion?

[Martinhdk]

After many rom flashes and it not working with 6.1 due to it shutting the sound off as well as giving me a voice command error. i opened up total commander and replace [HKEY_LOCAL_MACHINE \ Drivers \ BuiltIn \ WaveDev \Dll [REMOVE LONG GARBAGE] -->replace with [wavedev.dll]

Soft reset , go to settings and enable voice command, and enjoy SRS . hope this helps!

Kicken

Try to SHUT DOWN using power button instead of SOFT RESET....

[Premananda_laishram]

I think lots of those who listen to music with their pocket pc will like it

Just copy on the pocket pc and install on main memory. Don't forget to Soft reset after installing.

It works well on my HTC TOUCH

If it doesn't work after having installed then softreset try the tip of ga!nusha:
"in order to make this wonderfull software work on every ppc you first need to check what is in [HKEY_LOCAL_MACHINE \ Drivers \ BuiltIn \ WaveDev] "DLL" and after install replace [HKEY_LOCAL_MACHINE \ Drivers \ BuiltIn \ WaveDev] "Old driver" with what was in "DLL" before install

work on my mio"

OR use that taken from the pda4x forum:
After install SRS WOW, reset, then install this reg(unzip the wavedev.zip attached), and reset...
Now you can use SRS WOW HD, really Great Apps...


Download link : http://forum.xda-developers.com/attachment.php?attachmentid=77865&d=1206612566

I have a problem. I cannot use this and TCPMP(to play .dat files) at the same time. If I use it, the phone hangs until I take out the battery. I had to hard-reset the device a few times. I use Asus P525

[batcatman]

any fixes yet?
BUMP ^^:confused:

[archat68]

Worked great on my Ipaq 6828 (WM5) without any registry edit. Increased even my ringtones to much louder level which was barely audible earlier.

[Modifide7]

hey..guys..it really works..its incredibly wow..cool..

[branded]

i'm sure it's been answered... no sound on htc touch... freezes pocket player...

I'm excited to get it working as the eq in pocket player isn't the greatest (clipping).


any help is appreciated!


Thanks!

Matt

[edit]

problem already reported multiple times with no fix:
http://forum.xda-developers.com/search.php?searchid=16149698

[DarkWolfx]

On hermes, volume is lower, is there any way to mantain the same volume level, with the crisp quality of SRS WOW?

[osa]

thanks it's great cab

[derekwilkinson]

Bump, please someone make a fix for Windows Mobile 6.1!

[nuke1]

Bump, please someone make a fix for Windows Mobile 6.1!
Works fine for me. i have a custom wm6.1 rom on my elfin. do you have a vga device like diamond or raphael?

[yrsmart]

does this work for bt audio as well?

anyone know?

[tepss]

It works on win 6.1 qvga (kaiser) and vga (diamond - check diamond section for installation info) without any problem.

Makes huge difference and works great with BT a2dp (ie headphones).

[derekwilkinson]

Works fine for me. i have a custom wm6.1 rom on my elfin. do you have a vga device like diamond or raphael?

No, I have a Sprint Touch with the leaked WM 6.1 ROM... can someone share their registry in the wavedriver registry?

[Solidus_k]

this doesnt work in my htc touch vogue I also used the reg trick but I dont have any sound even "system sound" any ideas what I did wrong?

[tepss]

You had to put some wrong infos when updating registry, i've tried it also on athenna and vox and works on both however registry edition is necessary. did you reset device after reg changes and installation? Try other versions (example for diamond only working is 1.21)

[Solidus_k]

You had to put some wrong infos when updating registry, i've tried it also on athenna and vox and works on both however registry edition is necessary. did you reset device after reg changes and installation? Try other versions (example for diamond only working is 1.21)

Thanks for your answer I just did what you said change the name with WaveDev.dll and it worked, I had tu put the name manually because the .zip file in first post didnt work in my touch.
Thanks again.

[telcoxpert]

Just a precaution, if you install it on Samsung SGH-i780 it will damage both the sound and touchscreen drivers. Only a hard reset can fix the problem.

[diencaidau]

It works well on my O 2 Exec (Rom Tomal Vanilla WM 6.1 version 8.2), even with BT Sony Ericsons. Thanks for your post!

[frederikk]

It works on win 6.1 qvga (kaiser) and vga (diamond - check diamond section for installation info) without any problem.

Makes huge difference and works great with BT a2dp (ie headphones).

Hi,

just a question, where is the post for the installation on a diamond ? i cant' find it :(

Ciao
Fred

[turbomouse]

i have srswow workin on my tilt.. the only problem i am having is when i soft reset or turn the phone off the input and output gain sliders always go back to -6 and -4 i keep them both set the same at -1 its a huge difference. so im pretty sure i have to add something to the registry i just dont know what. anybody have any ideas?

[Alexx~]

i have srswow workin on my tilt.. the only problem i am having is when i soft reset or turn the phone off the input and output gain sliders always go back to -6 and -4 i keep them both set the same at -1 its a huge difference. so im pretty sure i have to add something to the registry i just dont know what. anybody have any ideas?
Fixed Input/Output, for example
[HKEY_LOCAL_MACHINE\Software\SRS\WOWXT\WaveDev]
"InputGain"=dword:00000002
"OutputGain"=dword:00000000
Fixed Headset/Speaker, for example
[HKEY_LOCAL_MACHINE\WOWHD\AutoInitProfile]
"Headset"=dword:00000001
"Speaker"=dword:00000000

[turbomouse]

awesome thanks!

[JeRoMe_aKa_JaY]

Fixed Input/Output, for example
[HKEY_LOCAL_MACHINE\Software\SRS\WOWXT\WaveDev]
"InputGain"=dword:00000002
"OutputGain"=dword:00000000
Fixed Headset/Speaker, for example
[HKEY_LOCAL_MACHINE\WOWHD\AutoInitProfile]
"Headset"=dword:00000001
"Speaker"=dword:00000000

Hi, I don't find any HKEY_LOCAL_MACHINE\WOWHD\AutoInitProfile.
Have to create this new key ? (with WOWHD directly in local machine or in software ?)

thx in advance

[Jokes On You]

I dont know if this has been fixed already but after installing I get no sound on my Omnia. How do I fix this?

[tyguy]

Try if this one works for you

http://forum.xda-developers.com/showpost.php?p=2825036&postcount=85

[princegoro]

I am using this for 2 months now on my polaris with wm 6.1,very stable and a great app. , the sound difference is unbelievable,a must have for everyone:)

[shruff]

I dont know if this has been fixed already but after installing I get no sound on my Omnia. How do I fix this?

Omnia is using an audio output device, "zylonite_wavedev2.dll" I've tried changing registry and installing all srswowhd apps posted here with the same result, no audio!
Any help appreciated, tia.

Here's what I found under the registry settings

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
"R2VS Target Model"="SGH-i900"
"R2VS Driver Version"="3.0.2 (2008.06.21)"
"IClass"="{A32942B7-920C-486b-B0E6-92A702A99B35}"
"Sysintr"=dword:00000019
"Priority256"=dword:00000095
"Order"=dword:00000001
"Index"=dword:00000001
"OutputDevice"="zylonite_wavedev2.dll"
"Dll"="R2VS_ARM_WM6_PRO_Driver.dll"
"Prefix"="WAV"


[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev\R2VS]
"m-Theater Preset"=dword:00000001
"m-Theater Woofer Gain"=dword:00000000
"m-Theater Woofer Enable"=dword:00000000
"m-Theater RR-SPK Y Position"=dword:00000000
"m-Theater RR-SPK X Position"=dword:00000000
"m-Theater RL-SPK Y Position"=dword:00000000
"m-Theater RL-SPK X Position"=dword:00000000
"m-Theater FR-SPK Y Position"=dword:00000000
"m-Theater FR-SPK X Position"=dword:00000000
"m-Theater FL-SPK Y Position"=dword:00000000
"m-Theater FL-SPK X Position"=dword:00000000
"m-Theater C-SPK Y Position"=dword:00000000
"m-Theater C-SPK X Position"=dword:00000000
"m-Theater RR-SPK Enable"=dword:00000001
"m-Theater RL-SPK Enable"=dword:00000001
"m-Theater FR-SPK Enable"=dword:00000001
"m-Theater FL-SPK Enable"=dword:00000001
"m-Theater C-SPK Enable"=dword:00000001
"m-Theater Y Offset"=dword:00000000
"m-Theater X Offset"=dword:00000000
"m-Theater Y Scale"=dword:00000000
"m-Theater X Scale"=dword:00000000
"m-Theater Default"=dword:00000001
"m-Theater Power"=dword:00000000
"Equalizer Custom Band8"=dword:00000000
"Equalizer Custom Band7"=dword:00000000
"Equalizer Custom Band6"=dword:00000000
"Equalizer Custom Band5"=dword:00000000
"Equalizer Custom Band4"=dword:00000000
"Equalizer Custom Band3"=dword:00000000
"Equalizer Custom Band2"=dword:00000000
"Equalizer Custom Band1"=dword:00000000
"Equalizer Band8"=dword:00000000
"Equalizer Band7"=dword:00000000
"Equalizer Band6"=dword:00000000
"Equalizer Band5"=dword:00000000
"Equalizer Band4"=dword:00000000
"Equalizer Band3"=dword:00000000
"Equalizer Band2"=dword:00000000
"Equalizer Band1"=dword:00000000
"Equalizer Preset"=dword:00000000
"Equalizer Enable"=dword:00000000
"3D Sound Gain"=dword:00000000
"3D Sound Mode"=dword:00000000
"3D Sound Enable"=dword:00000000
"Default Power"=dword:00000001
"Dynamic Boost Ratio"=dword:00000040
"Dynamic Boost Threshold"=dword:0000005D
"Dynamic Booster Enable"=dword:00000001
"Acoustic Module Enable"=dword:00000000
"Avoid R2VS Class"="2;"
"Audio Path Bluetooth"="10;20;"
"Audio Path Speaker"="1;"
"Audio Path Earphone"="0;2;4;8;"
"Audio Path Target"="AudioPathTarget"
"Audio Path Key"="System\\State\\Samsung\\Audio"

[sasu85]

This is a fantastic application on my trinity...
Is it possible to have a compatible version for my next Phone Samsung OMNIA??
Thanks in advance!

[duyve028]

Hello,

Anybody please help me. I installed WOW 1.2.1 with no luck then i reinstalled and now i can play music, but don't have system sounds, so no ringtones no alarms. Even the volume-up and down don't make sound. What registry value do i have to change. I already changed the wavedev to the old values(i hope).

I don't want a hard reset.

thx in advance

My phone is a HTC Touch Diamond

[tyguy]

Remove WOW with SK Tools and try the attached one. Though it seems that it has the same version number it worked for me (I had the same issue).

[Gamez]

So this prgram is great on my Diamond. But there is one problem.. After installation the sound is incredibly loud. Adjusting the volume doesn't do anything. everything else was still working fine though. FYI my touch is from Sprint.

[duyve028]

Remove WOW with SK Tools and try the attached one. Though it seems that it has the same version number it worked for me (I had the same issue).


This works.... perfect

[sasu85]

This works.... perfect

Is there an user that can try this file with samsung omnia
???

[hankeys]

this version working for me almost properly. i have this problem - when i set in options enable the headphones with WOWMetal - it works. but after a call is comming it will reset to internal and after end call ti stays in internal settings. Another one is that i want to set my settings so the SRS will remember my settings - it always reset my settings. Is there way to set in registry??

[tyguy]

@hankeys - .. reverting back to internal speaker
A had/have the same happening in my Tilt.
ROMeOS 4.5, 4.6 and eOS888 FiRe DO NOT show this behavior!
The Manila ROMs I tested so far DO show this behavior so my guess is that it is ROM not WOW related.

[luptakt]

Has anyone made it working on TOUCH PRO?

My problem is:
- volume doesn't change (system sounds and ring volume can be changed but the mp3 playback through any player is still on max volume)
- any change in srs wow control panel under the setting/system doesn't make any difference of sound (I'm using Sony MDR-EX71 headphones)

[dr_fuma]

Has any one made it workin' on HTC Universal/Jasjar/O2 Exec...?

However Universal has a support of Full Duplex soundcard with full 3.5mm Stereo Jack that means it delivers Full Stereo which automatically means SRS will most probably work on....Installing..will test & find it out.

[Pblee]

works on my dopod810 even with windows mobile 6.1....


Although you do get a one off message that it wasnt made for this version of windows.

[luptakt]

Finally I solved my issue with srs wow hd.
My friend made it working long time ago.
Check his thread http://forum.xda-developers.com/showthread.php?t=434915
But I couldn't made it working on my TP.

He's running stock wwe rom. So I suspected that as an issue as I am running custom roms (used to be ROMeOS, now it's ELITE RC1).

He told me it's not working with tf3d player but I refused to drop tflo3d as I liked it and TP is not TP without it. And I refused to give up about srs wow hd too.

My issues as many others here were not changable max volume and even worse not changing the sound after making changes in srs wow hd.
So I turned off the tf3d and guess what. WORKING! working with WM and 3rd party players.

What about damn tf3d? I'm not gonna use other player just because it's working with it. Accidentally I copied WMA with others MP3s into my TP. And now guess what. WORKING!!! So the trick is to convert your mp3s to wmas. Annoying if you got 300 mp3s but the only solution I found.

Hope this will help some of you.

[indra1]

is it enable for Xperia x1 with no problem?

[omair2005]

tried on HTC Vogue (touch) but now i get no sound at all?

[eddyther]

Installed in the touch HD and getting the same error (file missing).Any ideas?

[eddyther]

Installed in the touch HD and getting the same error (file missing).
Any ideas?

[xninjastylex]

Here is how I got it to work with my HTC Touch HD:

* download & install WOWHD121.CAB (attached)
* reset device
* download & install GSPlayer (attached)
* WOW HD will not work with WM or TouchFlo players, I have tried many other players too, but only GSPlayer works with WOW HD.

[igorstef]

Fixed Input/Output, for example
[HKEY_LOCAL_MACHINE\Software\SRS\WOWXT\WaveDev]
"InputGain"=dword:00000002
"OutputGain"=dword:00000000
Fixed Headset/Speaker, for example
[HKEY_LOCAL_MACHINE\WOWHD\AutoInitProfile]
"Headset"=dword:00000001
"Speaker"=dword:00000000

Hi, I don't find any HKEY_LOCAL_MACHINE\WOWHD\AutoInitProfile.
Have to create this new key ? (with WOWHD directly in local machine or in software ?)

thx in advance

I have same question. It doesn't seams to work if you put WOWHD in
HKEY_LOCAL_MACHINE or in SOFTWARE. If I understand it correctly this
settings should prevent reverting back from headsets to internal (stereo).
Please share some more light on this.

[batcatman]

I have same question. It doesn't seams to work if you put WOWHD in
HKEY_LOCAL_MACHINE or in SOFTWARE. If I understand it correctly this
settings should prevent reverting back from headsets to internal (stereo).
Please share some more light on this.

Same here, doesn't works. I need a registry setting that would prevent reverting back to headphones everytime I insert headphones in my Diamond.

[DJC89]

On my omnia, the driver just shut down my sound, is this what u ment by "it can ruin your ppc"? well, hope i can bring it bk 2 normal.

Isnt there a newer version tht can work with WM 6.1 Pro?
Would b easyer :P

Ciao, C89

[derekwilkinson]

On my omnia, the driver just shut down my sound, is this what u ment by "it can ruin your ppc"? well, hope i can bring it bk 2 normal.

Isnt there a newer version tht can work with WM 6.1 Pro?
Would b easyer :P

Ciao, C89

Disable if it's enabled, uninstall it, soft reset. See if that fixes it...

[Aerodeath]

I lost my sound on my X1, can anybody post a working registry for SRS WOW HD?

[deepthroat]

yeah, me too on Kaiser ... neeed to back up the registry and see what changes made after install this cab :(

[derekwilkinson]

(disregard)

[derekwilkinson]

(disregard)

[vishalgupta]

Hi friends
iv got a Mogul with Sprint Latest Leaked rom WM 6.1
Can anyone help me on this
the system volume is very low somtimes im not able to hear the ring in a crowdy place
iv tried SRS WOW HD but it didnt work it showed a driver missing iv tried soft reset but still no luck
How could i increase the system volume

PLzzzzz help

Thanxxxxxxxx

[kmahesh]

I installed this app on my Touch Pro (1.51 WWE ROMeOS) and find absolutely no difference in the sound at all. If I do "About" SRS WOW HD, it says that I have 1.2.10.0.

Is this the latest version?

Please help

[bakaroo]

Remove WOW with SK Tools and try the attached one. Though it seems that it has the same version number it worked for me (I had the same issue).

Thanks. It works on my omnia. :)

[tyguy]

I think the important steps are:

Remove with a "good" tool (i.e. SK to clear the registry entries which a normal uninstall may NOT do).
Install SRS WOW.
Soft reset (stylus is perhaps better than power cycle).


As said several times I had the same issues and these steps helped.
Furthermore I had once the issue that all my sound went dead (speaker and in call) UNINSTALL did N O T fix it, SK or Memaid uninstall DID.

[tvos]

Friends,

I have been battling with this SRS WOW for the last 3-4 days now trying to get this working with my AT&T Fuze and its driving me crazy. Tyguy has given me excellent ideas, tips, and been a blessing in helping out.

So far I have tried every trick in the book from reg edits, different installs, factory reset, different roms, even exchanged the fuze today.. still coming up short.

A lot of people that have the device have it working perfectly and others not so luck. This is what I have found so far -

Third party players like pocketplayer, gsplayer deliever bass etc but not as good like srs. So I know eq settings are working and adjusting correctly in their respectiful application.

If srs is loaded than audiobooster disables itself and music player does play but not with the SRS settings. If I try to change settings in SRS, there is no affect what so ever. This tells me that the driver is not working in SRS...

As of right now, I am lost for words on this... Many people have SRS and I question if the model slightly different between regions?

Tvos

[tvos]

Here is how I got it to work with my HTC Touch HD:

* download & install WOWHD121.CAB (attached)
* reset device
* download & install GSPlayer (attached)
* WOW HD will not work with WM or TouchFlo players, I have tried many other players too, but only GSPlayer works with WOW HD.

are you sure this is working with GSPLAYER? I am able to get the extra bass by changing settings and I must say it is pretty good and solid.

tvos

[enricati84]

this program don't work on my diamond and even on my touch hd, can you post a working version for this phone?

[tvos]

some people have it working on their touch diamond pro, raphael, fuze or whatever you want to call it...

i own The Fuze..and worked on this problem for 4 days, trying EVERY trick in the book.. registry edits, hacks, surfing articles, you name it.. keep coming up short each time.. i even contacted SRS labs which I am waiting for their feedback on a new pluging.

tvos

[norkoastal]

some people have it working on their touch diamond pro, raphael, fuze or whatever you want to call it...

i own The Fuze..and worked on this problem for 4 days, trying EVERY trick in the book.. registry edits, hacks, surfing articles, you name it.. keep coming up short each time.. i even contacted SRS labs which I am waiting for their feedback on a new pluging.

tvos
Is this plugin that much better than Audio Booster? I found AB to put some clarity in the highs and a little extra thump for the lows when using S2P.

[tvos]

I had SRS working on my tilt until I sold then switched to the fuze..

AB is just a eq program, SRS is a kick a$$ surround soound, in your chest bass thumping plugin.... what was cool about srs is that if you wanted all bass, no music would distort.. the plugin was inteligent how it adjusted to sound.

hands down, SRS is the best out there..

tvos

[nathrinder]

Wow, great soft. The sound coming out of my phone's internal speaker sounds so much better now. Thanks !

[tyguy]

It's not the INTERNAL speaker that counts a good working SRS WOW blows year ears off using a headset (perhaps that's why there is a "WOW" in the name :) ).

[SaBo]

Is this plugin that much better than Audio Booster? I found AB to put some clarity in the highs and a little extra thump for the lows when using S2P.

Audio Booster is an application to control a hardware equalizer.
SRS WOW is software based and more surround oriented.

If you want better sound, then Audio Booster is the way to go.
If you want effects (hall, surround, etc.) then SRS WOW is the way to go.

Sascha

[anubis23]

those of you who have install this on the touch diamond, can you please post instructions of how you did it? plz and ty

UPDATE: for diamond users, justinstall the app and it'll work

[Wam7]

Audio Booster is an application to control a hardware equalizer.
SRS WOW is software based and more surround oriented.

If you want better sound, then Audio Booster is the way to go.
If you want effects (hall, surround, etc.) then SRS WOW is the way to go.

Sascha
SRS WOW is much more than effects. It does make the sound much better. It's crisper, clearer and deeper. Can't compare with Audio Booster as haven't used that.

[Wam7]

Double post...

[vnandigana]

Hi

I found that after installing the SRS WOW drivers, it may not be required to revert the wavedev.dll back to original.
Please try changeing this "Flags"=dword:00010000 to "Flags"=dword:00010002, useing some registry editing tool. this is in the drivers -> builtin -> WaveDev registry

Note that this is the value you will find in BtA2dpSnd registry too.

it works on a ASUS P320. both Bluetooth and wired headphones work and show up enhanced SRS Sound.

I dont have a technical explaination for this, just found it by chance.

thanks
Regards

[vnandigana]

Install the SRS_WOW_HD 121 from post http://forum.xda-developers.com/showthread.php?t=355913&page=17. Then

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
"Dll"="WOWHD_ARM_WCE_PPC2005_Driver.dll" <<< dont touch this, leave as is
"OldDriver"="Wavedev.dll"
"Sysintr"=dword:00000019
"IClass"="{A32942B7-920C-486b-B0E6-92A702A99B35}"
"Bass"=dword:00000000
"Treble"=dword:00000000
"AGC"=dword:00000000
"MicGain"=dword:00000027
"3DEff"=dword:00000000
"GainADC_ReceiverMIC_12h"=dword:00000037
"GainADC_HeadsetMIC_12h"=dword:0000002a
"GainADC_LoudSpkMIC_12h"=dword:00000037
"GainADC_BluetoothMIC_12h"=dword:00000021
"HPVol_PhoneCall_04h"=dword:00000004
"SPKVol_PhoneCall_02h_06h"=dword:00000003
"SPKVol_NotPhoneCall_02h_06h"=dword:00000000
"DACVol_0Ch"=dword:00000007
"GSMSpeakerVol"=dword:0000007f
"SyrenSPKG"=dword:00000001
"StreamAttenMax"=dword:0000002c
"GpioHeadsetAmpEnable"=dword:00000010
"GpioAmplifierEnable"=dword:0000002a
"MemLen"=dword:00000400
"MemBase"=dword:fffbb000
"Order"=dword:00000001
"Index"=dword:00000001
"Flags"=dword:00010000 <<<<<<< Chenge this to "Flags"=dword:00010002
"Prefix"="WAV"

Soft reset. enable SRS WOW. both Bluetooth and wired Headphones should sound SRS enhancements. Please try.

thanks
Vnandigana

[ajbopp]

I hate when this thread keeps coming back up cause I'm jealous of all you that can make it work. It don't at all on the Vogue. :(

[wud_e]

Sprint HTC Touch with Manilla 2D and all that Jazz. I get no sound at all with SRS WOW installed. I tried uninstalling Audio Boost but still nothing. I also did do a soft reset. I don't get sound on ANY application not even when raising and lowering the volume.

[aikidoka-mks]

I hate when this thread keeps coming back up cause I'm jealous of all you that can make it work. It don't at all on the Vogue. :(

Yeah, same experience here since the Windows update. It worked before that but I don't think anyone has made it work with the update yet.

[vnandigana]

Hi

Pls Follow my post. in which I explained to make one small change in a registry. Don't do the Wavedev.dll restoration change.

SRS WOW will work. I have it working on ASUS P320 wm6.1, and LGKS20 with wm6.1 ROM.

Should work on other standard WM based devices. Try hard, because music with SRS WOW, is wonderful.

Pls note : you need at least 300MHz CPU to run SRS WOW DSP and Bluetooth A2DP and music player.

thanks

[tvos]

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
"Dll"="WOWHD_ARM_WCE_PPC2005_Driver.dll" <<< dont touch this, leave as is
"OldDriver"="Wavedev.dll"
"Sysintr"=dword:00000019
"IClass"="{A32942B7-920C-486b-B0E6-92A702A99B35}"
"Bass"=dword:00000000
"Treble"=dword:00000000
"AGC"=dword:00000000
"MicGain"=dword:00000027
"3DEff"=dword:00000000
"GainADC_ReceiverMIC_12h"=dword:00000037
"GainADC_HeadsetMIC_12h"=dword:0000002a
"GainADC_LoudSpkMIC_12h"=dword:00000037
"GainADC_BluetoothMIC_12h"=dword:00000021
"HPVol_PhoneCall_04h"=dword:00000004
"SPKVol_PhoneCall_02h_06h"=dword:00000003
"SPKVol_NotPhoneCall_02h_06h"=dword:00000000
"DACVol_0Ch"=dword:00000007
"GSMSpeakerVol"=dword:0000007f
"SyrenSPKG"=dword:00000001
"StreamAttenMax"=dword:0000002c
"GpioHeadsetAmpEnable"=dword:00000010
"GpioAmplifierEnable"=dword:0000002a
"MemLen"=dword:00000400
"MemBase"=dword:fffbb000
"Order"=dword:00000001
"Index"=dword:00000001
"Flags"=dword:00010000 <<<<<<< Chenge this to "Flags"=dword:00010002
"Prefix"="WAV"


So you are saying only make changes to the Flags registry or should we change the the other settings and make the changes accordingly?

Don't be to confident that it should work on other devices, everyone that owns the Touch Diamond Pro have been battling this problem. Even the chefs that are elite can't get it to work. I had a HTC Tilt and SRS worked beautifully and I know the plugin and how it makes the word difference.

I will try this trick and if it does the job, will put the word on the street.

Thanks for your input,

Tvos

[wud_e]

That worked through BT headset it is necessary to copy all parameters from [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Wave Dev] in HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BtA2dpSnd
Except for value of parameter "OldDriver", he should be such, as was "DLL"
For example:
Before
"DLL" = "bta2dp.dll"

After
"DLL" = "WOWHD_ARM_WCE_PPC2005_Driver.dll"
"OldDriver" = "bta2dp.dll"

Thanks for the Spoonfeeding!! This Cleared it up for my Sprint Touch WM6.1. After i read this post I was like "Duh!" :p I didn't understand the wording in the first post of this thread.

Thanks for the Software. I'll have to test it in the car.

[yrsmart]

I tired what vnandigana said to do and my sound is not working so I had to uninstall it on my Samsung.

[Wam7]

I tired what vnandigana said to do and my sound is not working so I had to uninstall it on my Samsung.
Try this one and let me know if it still doesn't work. Remember to restart after installing.
http://rapidshare.com/files/176220167/SRS_WOW_HD_121.A2DP.CAB

[yrsmart]

still does not work. And now I can't un install it. I tried to even un-install it with sktools but its still there. Not to mention my sound is still gone.

edit: sktools was able to un-install it but my sound is still gone even after a few soft-resets.

[tvos]

Vnandigana,

I tried your example and it appears to be working so far on my touch diamond.... I still have a few things that I want to try, see what happens but for the most part the bass is not present and srs is doing its job.

I did notice that SRS is working in S2P, Mort Player, but in TF3D or Windows media it is not. I don't use those apps much so it's not a big deal.

Will keep you posted and again THANK YOU for this info. I been hacking away at this for a week now...

Tvos

[wud_e]

Well I'm going to have to uninstall it. With it installed my phone won't coem out of sleep mode a lot of the times and I have to do a soft reset after the phone goes into sleep. :(


Here is what I noticed about it:

When playing through the external speaker on my Sprint Touch(WM6.1) Bass is non-existant.

When playing in my car via adapter the sound is GREAT. The Bass is handled so much better and the treble doesn't sound over sharpened.

I didn't notice any changes when changing the settings though.

I do like the program though.

[tvos]

When playing through the external speaker on my Sprint Touch(WM6.1) Bass is non-existant.


like you are going to have some serious sound coming from the spearker... c'mon, output to the car radio /eq will give you better clarity in sound, a cheap little speaker will not..

tvos

[wud_e]

like you are going to have some serious sound coming from the spearker... c'mon, output to the car radio /eq will give you better clarity in sound, a cheap little speaker will not..

tvos

I wasn't trying to get "serious sound" out of the internal speaker. Just making a note. Bass tones I did hear with the internal speaker are gone with SRS installed.

[wud_e]

I hate when this thread keeps coming back up cause I'm jealous of all you that can make it work. It don't at all on the Vogue. :(


It does work on8 the Vogue. You just have to use a Regedit program like Task Manager to change the key "DLL" to wavedev.dll (or whatever your "Old Driver") key says. I was wondering if you could try this on your Vogue to see if your Vogue won't come out of standby with SRS installed.

[norkoastal]

So you are saying only make changes to the Flags registry or should we change the the other settings and make the changes accordingly?

Don't be to confident that it should work on other devices, everyone that owns the Touch Diamond Pro have been battling this problem. Even the chefs that are elite can't get it to work. I had a HTC Tilt and SRS worked beautifully and I know the plugin and how it makes the word difference.

I will try this trick and if it does the job, will put the word on the street.

Thanks for your input,

Tvos


The steps above work for the Fuze in S2P after a reset. The Config app is added under Settings/System. Sounds great. Love all the tweaking options :D

[jp7152]

Just tried it on my touch hd and the difference with a cheap pair of headphones is incredible. It sounds much more detailed.

Can't wait to test it plugged into my car. :)

[ajbopp]

It does work on8 the Vogue. You just have to use a Regedit program like Task Manager to change the key "DLL" to wavedev.dll (or whatever your "Old Driver") key says. I was wondering if you could try this on your Vogue to see if your Vogue won't come out of standby with SRS installed.

I have edited my registry 7 ways from Sunday, including the change you suggest. Nothing has ever worked. Upon soft reset, I get no sound at all.

Now the last change I made was the Flags edit that was suggested above. I found this one odd because that particular value wasn't in the registry at all, and I had to create it from scratch. That being the only change I made, I finally wound up getting sound after my soft reset, and I can see that it's making a difference. It's a challenge getting the sweet spot for settings, and I have yet to try it with my bluetooth headphones or bluetooth FM transmitter, but it's progress anyway.

As for coming out of standby, that's never been a problem at my end.

[tvos]

Its going to vary from device to device.. I changed the flags value and now have SRS working w/no problems. This is a process of trial and error with SRS and what ever works, stick with it and thank god!

tvos

[vnandigana]

Hi All,

I agree that SRS Drivers may not work on all devices due to some un-known dependencies. But the principle is, The wave output of your player has to pass through the SRS WOW Driver to get SRS Sound output.

now if you revert to old driver, it will seem to work, but it is the regular nor SRS Sound. so you should not change the wavedev.dll and bta2dp.dll regs.

I only have a ASUS P320 and LG KS20, it works on both(wm6.1). (ASUS uses MS Bluetooth stack, LG has Broadcom stack).

And that is what Hacking is about, tinker with it until it works.

thanks
Vnandigana

[vanilaguy]

that there are a lot of arrogant bastards in here, and all other threads. they bash other members for simple little questions that can be easily answered by a polite yes or no. they take things too seriuosly and think of themselves as the saviour of the world. they put themselves up high in a pedestal, and dump others way below the ladder. so sad. :(

[ajbopp]

that there are a lot of arrogant bastards in here, and all other threads. they bash other members for simple little questions that can be easily answered by a polite yes or no. they take things too seriuosly and think of themselves as the saviour of the world. they put themselves up high in a pedestal, and dump others way below the ladder. so sad. :(

Wow...what was that about??

[shruff]

that there are a lot of arrogant bastards in here, and all other threads. they bash other members for simple little questions that can be easily answered by a polite yes or no. they take things too seriuosly and think of themselves as the saviour of the world. they put themselves up high in a pedestal, and dump others way below the ladder. so sad. :(

Have you ever noticed?

There are so many noobs that ask the stupidest most thoughtless Q's (undeserving of polite yes's/no's) right in the main thread topic before reading or researching. These are the ppl who get bashed because they're way down at the foot of the pedestal licking the feet of the serious saviors on top:D... as for the dumping well that's just sick dude:eek: so happy:D

[norkoastal]

Update.. SRSWOW locks up my Fuze when it goes into sleep mode. Only a battery pull will wake it back up... Tried W/O S2U2 and it KO's the phone after 20 seconds... It did sound good when it worked though.. Hopefully the driver issues will be worked out soon..

[ajbopp]

Yeah I spoke too soon. I thought this was working great but last night it started locking up my Vogue when it went to sleep. Only reset button would bring it back. Uninstalled SRS and the problem is gone. Ah well. The sound was good, but I guess I'll have to wait a year or so when my contract is up and I can get a new device.

AJ

[nighos]

Hello I have similar problem
at first after soft reset it works well
then after some time (probably after turning on and off the ppc), no sound can be emitted at all.
Is that the software's problem or I haven't edit the regedit as shown in the first post?
Any help is appreciated

[xxpada]

i have a sprint htc touch vogue and i installd this unfortunately i have lost all of my sound. i tried to fix the registry but i think i messed t up real bad i just want sound back

can anyone help with directions or a reg file or fix cab for the registry folder wavedev
i dont wanna have to do a rom flash bcuz i dont have a computer handy

thank you in advance

[fredamexis]

backup all your data and hard-reset.. it's the easier way at the moment than finding the error..

good luck!

[earthtodigi]

Thanks so much to everyone in this thread, I have been trying to get this working for months and now I have it working perfect on my vogue.

[vanilaguy]

locks up and does spontaneous re-starts on my elfin. :( it does make the sound better though. :D

[airborneaussie]

Thanks so much to everyone in this thread, I have been trying to get this working for months and now I have it working perfect on my vogue.

How? I'm really curious as to how you got this working. I tried installing it and came very close to a hard reset.....

Cheers!

[wud_e]

I have edited my registry 7 ways from Sunday, including the change you suggest. Nothing has ever worked. Upon soft reset, I get no sound at all.

Now the last change I made was the Flags edit that was suggested above. I found this one odd because that particular value wasn't in the registry at all, and I had to create it from scratch. That being the only change I made, I finally wound up getting sound after my soft reset, and I can see that it's making a difference. It's a challenge getting the sweet spot for settings, and I have yet to try it with my bluetooth headphones or bluetooth FM transmitter, but it's progress anyway.

As for coming out of standby, that's never been a problem at my end.

Thanks for trying it. I wonder why mine keeps doing that.

Edit: Read the other post that yours and a few other peoples Sprint Touch's don't come out of stand-by either. Unfortunate as this did work and sounds good. :(

[ajbopp]

Thanks for trying it. I wonder why mine keeps doing that.

Edit: Read the other post that yours and a few other peoples Sprint Touch's don't come out of stand-by either. Unfortunate as this did work and sounds good. :(

Heh...a few posts later I explain that it did start happening to me the next day and I eventually had to uninstall it again. It's not just you ;)

AJ

[prasanh]

Hi Peeps..

Will this application(SRS WOW) works with HTC Fuze ??

I have installed it and done a soft reset...still i see no driver msg and i cant hear any sound from my mobile.


Please advice
thanks.

[prasanh]

And I have changed the registry also :(

[chris12892]

I can't get this to work on my IPAQ 211.

I installed the 1.21 CAB, soft reset, then set "olddriver" to "btcedrivers.dll". What am I doing wrong? I alwasy get the "cannot open WAV..." error message after soft reset.

Thanks,
Chris

[AGPPC]

Just tried it on my touch hd and the difference with a cheap pair of headphones is incredible. It sounds much more detailed.

Can't wait to test it plugged into my car. :)

Hi,

Can you or anyone please please help me to configure it on my touch hd as i have been trying this thing to work for months but no success.

Many thanks

[deeznuts]

Hi Peeps..

Will this application(SRS WOW) works with HTC Fuze ??

I have installed it and done a soft reset...still i see no driver msg and i cant hear any sound from my mobile.


Please advice
thanks.

Bump, would also like to know.

[tvos]

Bump, would also like to know.

C'mon people... I have spent three weeks trying to get SRS WOW working with my Fuze and now it does.. I did searching, reg edits, you name it and went above and beyound!

Why can't you lazy people do the same and invest some time vs. asking what is already know..

Yes.. srs works with the fuze..

tvos

[caldito]

C'mon people... I have spent three weeks trying to get SRS WOW working with my Fuze and now it does.. I did searching, reg edits, you name it and went above and beyound!

Why can't you lazy people do the same and invest some time vs. asking what is already know..

Yes.. srs works with the fuze..

tvos

Man this is a community instead of wasting your time with a useless response why dont you give an useful to the guy.

in my case i got working both speaker and A2DP and SRS wow in my Touch Pro adding this reg setting after the installation of SRS_WOWHD_ARM.cab

Hope it is useful for you.

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
"Flags"=dword:00010002

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BtA2dpSnd]
"DLL" = "WOWHD_ARM_WCE_PPC2005_Driver.dll"
"OldDriver" = "bta2dp.dll"

[tvos]

Man this is a community instead of wasting your time with a useless response why dont you give an useful to the guy.

in my case i got working both speaker and A2DP and SRS wow in my Touch Pro adding this reg setting after the installation of SRS_WOWHD_ARM.cab
"

it is about helping people and community, all the data is there in the posts. keywords, searching will display the results. you can not give a answer to everyone everytime because there are many variables to resolutions, just like the srs wow. i did not have to change the driver, i had to make a reg edit which was compltely different from the standard norm.

so you see just getting a quick fix does not solve the worlds problems.. you have to 'search' and do a little work to be rewarded.

tvos

[mszach]

I installed the cab file on my i760. After the soft reset, a message appeared that my voice command needed to be re-installed and my sound did not work at all. I also got the "there is no WOW HD driver installed" message when I ran the program. I am running 6.1. Please help as I have on sound and I don't want to do a hard reset.

[h9s]

I installed the cab file on my i760. After the soft reset, a message appeared that my voice command needed to be re-installed and my sound did not work at all. I also got the "there is no WOW HD driver installed" message when I ran the program. I am running 6.1. Please help as I have on sound and I don't want to do a hard reset.


I do think u just need to uninstall it only, i got the same problem before.

[mszach]

I have tried to uninstall using pocket mechanic and win uninstall, but it tells me it cannot uninstall it properly.

[mbze430]

Ok, I couldn't get it to work on my Fuze either running NAFT v4.1 rom. Matter a fact, after installing SRS Wow on my Fuze, the volume buttons won't decrease or increase the System or Ring volume.

And yes I did the Flags and bunch of other registry stuff... NO GO.

It looks like that if you are using a ROM that is using the TouchFl3D with Manilla that already has the preset Registry key to Audio Booster, it won't work. (IMO)

On my Tilt, SRS WOW works perfectly.

[Immix]

Ok, I couldn't get it to work on my Fuze either running NAFT v4.1 rom. Matter a fact, after installing SRS Wow on my Fuze, the volume buttons won't decrease or increase the System or Ring volume.

And yes I did the Flags and bunch of other registry stuff... NO GO.

It looks like that if you are using a ROM that is using the TouchFl3D with Manilla that already has the preset Registry key to Audio Booster, it won't work. (IMO)

On my Tilt, SRS WOW works perfectly.

Search for the cab version called SRS_WOW_HD_121.cab. If you can't find it, shoot me a pm and i'll post it here. This version works on my Fuze. Infact this is only the version that works on WM6 and WM6.1 IIRC.

[norkoastal]

Search for the cab version called SRS_WOW_HD_121.cab. If you can't find it, shoot me a pm and i'll post it here. This version works on my Fuze. Infact this is only the version that works on WM6 and WM6.1 IIRC.

Im game for this 121 cab... I wouldn't mind disabling AB for SRS thats for sure. :D RU sure it doesn't lock up the phone when it goes to sleep? One version took a day to rear its ugly head.

[gachax]

I have an elfin with the latest official ROM 3.07.xx. Tried the SRS HD 121 version mentioned here(after having tried several other versions). At first you loose sound, so you have to complete those reg tweaks of Flags= 00010002 etc. and a soft reset. Once you get the sound back, it works great even with A2DP(but not AVRCP other than default audio manager). But the phone begins rebooting after almost a day of usage!!! Such a bummer!! I used to use SRS BT fixed version alongwith SRS 1.28 on the older 2.xx ROMS which used to work like a charm even A2DP/AVRCP on any player. Now thats all lost!!
Wonder when someone will work to get a fix for this!!

[vanilaguy]

I created this link in notepad:

28#"\Windows\WOWHD_ARM_Panel.cpl"

and I named it WOWHD.lnk, and placed it in \Windows\Start Menu\Programs\ but the WOWHD icon does not appear in the link. How can I make the link have the WOWHD icon?

[vinumsv]

Working Fine in My Touch HD :D but i don't see any difference ? why ? or am i looking at the wrong locations ??

I used 1.21HD version + control panel replacement :rolleyes:

the fact i didn't change anything in my registry ....

[rotsu]

I have the same problem with xperia x1.

Dont notice any changes in audio. Are we missing some registry for audio or something?

[chihliouma]

For those who has issue with SRS. Please try this one.

http://forum.xda-developers.com/showthread.php?t=426540&page=481

[Flint420]

the original cab works on my vogue. All i had to do was add the "Flags" registry edit and do a soft reset.

[tbryson92110]

be very carefull! installing this software may ruin your ppc... on mio a701 a hard reset is required.. and at some htc devices too...

HEED THIS WARNING!!!!!
This program ruined my dialer/bluetooth connection

[norkoastal]

For those who has issue with SRS. Please try this one.

http://forum.xda-developers.com/showthread.php?t=426540&page=481

So far so good W\o running TF3D.. no locks today.. No locks since ive uploaded this last verison. Woo Hoo!!!. Note TF3D is not active, and Audio Booster wont launch once I have music playing.. This alone will keep me from using TF3D again until fixed.

[junshiong]

install Wow Hd disable my touchscreen and sound , pls help! Although it is able to uninstalling and enable my sound and touchscreen but still... wanted to use it without hard resetting

currently using samsung i780

[F_R_I_T_Z]

No idea if this help someone or if this is a fake one. but lets share this.

[sarecco]

Absolutely great app for my new fuze. I have motorola stereo bluetooth headphones. An absolute must app to really enjoy this headset.

Steve from ny

[gribabosse]

:D Thank's a lot. It works very well with my Blackstone

[damir-bosna]

works great on my HTC UNIVERSAL.
Thx lot

[furry]

I have edited my registry 7 ways from Sunday, including the change you suggest. Nothing has ever worked. Upon soft reset, I get no sound at all.

Now the last change I made was the Flags edit that was suggested above. I found this one odd because that particular value wasn't in the registry at all, and I had to create it from scratch. That being the only change I made, I finally wound up getting sound after my soft reset, and I can see that it's making a difference. It's a challenge getting the sweet spot for settings, and I have yet to try it with my bluetooth headphones or bluetooth FM transmitter, but it's progress anyway.

As for coming out of standby, that's never been a problem at my end.

Could you (or anyone with a Sprint Touch) post up which cab version and what key in the Reg to get it to work? I have tried all versions and so many reg edits until I'm confused and I still can't get it to make a sound. I've had to do a registry restore twice... This sucks!!

[neophyte.vii]

No idea if this help someone or if this is a fake one. but lets share this.

Thank you!!!!!!!!!!!

This has been missing on my Titan since the Sprint 6.1 update!!!!!!!!!!

HUGE THANKS

[oknaka1]

Just to share... Currently using Samsung omnia, after installing this, my omnia hangs and went into sleep mode. Need to soft reset it to work. And touch screen screwed up. Ended up hard-resetting my main memory.

[neophyte.vii]

A follow-up to my previous post:

1.5.1 works on the current wm6.5 beta4 titan rom,

but fails to load the driver on dcd 3.3.4 & 4.1.2

Grr.

[ss_0088]

Absolutely great app for my new fuze. I have motorola stereo bluetooth headphones. An absolute must app to really enjoy this headset.

Steve from ny

Which version did you install? Does anyone know a version that will work on the NATF 4.2 rom?

[vanilaguy]

wow srs works fine, i cant contorl the volume but i cant rewind pause play or forward using the buttons on motorola s9. any help?

[nonegiven]

A follow-up to my previous post:

1.5.1 works on the current wm6.5 beta4 titan rom,

but fails to load the driver on dcd 3.3.4 & 4.1.2

Grr.
Won't load on my custom ROM either. Adding the Flags registry entry didn't do any good.

[mancukya]

This not works on htc diamond ?

[kolokas]

on htc hd works???????

[gabriel31337]

Yes, it works perfect on HTC Touch HD. I recommend it.

[Conglomerate]

I gave up.

Tried multiple versions of the 1.21 cab files posted on these forums.
(The 1.28 is meant for non-touchscreen phones)
Only one that booted past the blue Imate screen after a soft reset was a modified cab called 02_SRS_WOW_HD 121.CAB

But it did not set the registry entries correct.
Multiple soft resets - no change.
The settings panel just came up HD driver not loaded - exiting.
And once Registry edited with Total commander & correct driver loaded,
http://forum.xda-developers.com/showthread.php?t=355913&page=9
it too crashed at blue screen.
With only recourse a hard reset.

I am using an official 1.77 Rom updated device.

Let me know if anybody gets this to work on an Imate ultimate.

Version 1.5 Wow also locked up, hung device at reset.

[tvos]

Friends,

I am a very big fan of SRS on the Raphael and I tell you the application plugin is pain to get working. As everyone has written before my post, it either works or it doesn't on their device. There are a few versions out there floating around and it does require a lot of trial and error in order to get the sound wanted from the plugin.

Now, before I start I have been through three Raphael phones due to hardware problems that I had to send back for RMA replacement. I am now on my fourth phone and hope it stays that way for a long time!

On two of the raphael phones, I was not recieving the full punch of SRS wow with the extra bass, compression, surround sound etc.. But on the other two same identical phones I had no problems with the full sound. At the present, if I listen to a song - doesn't matter the song I hear the bass thumping into my chest.. Sometimes, it can be annoying and other times the balence that srs brings out between all instruments is amazing. This is where SRS does a beautiful job bringing out the extra heavey bass without muffling the other sounds. If you think your srs is working but doesn't deliever the bass thumping in your chest as I describe for your mp3 playback phone, then it's truely not working...:)

I have included my screen shots, registry edits and the different device information for you to plow through and compare. Now, remember this is for the AT&T Raphael pocket pc phone.

Steps

1. Install SRS_WOW_HD 121.CAB and reboot the ppc
2. Install WOWHD_ARM_Panel.cpl
3. Change the registry entries before going into the app.
4. Goto: [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
5. Change "Flags"=dword:00010000 to "Flags"=dword:00010002
6. Launch SRS WOW from the settings and use the screen shot I supplied. I like the heavey bass thumping sound, so these are my settings.


SRS Software Versions

I could not get the other software versions to work with the raphael phone. So for SRS to work 121 is the only one that works. Don't waste your time trying the others....just use 121

Now, how do you figure out if your Raphael phone will produce the sound with SRS WOW as I mentioned above? That is a good question because it definitely comes down to the electronics in the device that HTC puts into the device. Should SRS WOW work on all devices "YES" but as I expressed earlier, it does not. I have already been through four phones and two worked and two didn't. (Same settings, reg edits, radio, spl etc). So there is something between the devices that delivers better performance with SRS.

Stats Information on PPC

Rom Version ROMeOS v1.51 WWE
Rom Date: 12/04/08
Radio Version: 1.02.25.32
Protocol Version: 52.39c.25.22U

IMEI - first ten digits I noticed a trend between phones. "15" works and "12" does not. I verified this with the other two phones and the one that did work also had a "15"..
3531420212 SRS doesn't work (Old Phone)
3531420215 SRS works (New Phone)

SPL

RAPH110
SPL-1.90.Olinex
MicroP-Raph (LED) v13
MicroP-Raph (Key) v5
PSOC-Raph Stage_CVT v0x36

R: 1.02.25.32
G: 52.39c.25.22
D: 1.9xromeos (RomeOS)

Mac Address

I also noticed that the two phones that SRS wow did work on the mac addresses were close and similar, the other two were different.

I would honestly for those really interested in having SRS on their phone for the Raphael users, definitely use ROMeOS rom and radio I listed.

It will take some trial and error deffinitely. But in the meantime, the application SRS wow has to be handled with kid gloves in order to real deliver the sound.

Also, take note and back everything up before making changes to your ppc.

Good luck and hope you enjoy.

Tvos

[vblbros]

this works for xv6900 wm6.1
thanks man

[slimohnr]

be very carefull! installing this software may ruin your ppc... on mio a701 a hard reset is required.. and at some htc devices too...

on i780 after instalation not working touch panel and don't have sound

[sethlo]

Got it working on my touch pro - WITH TF3D MUSIC PLAYER AND WORKING VOLUME BUTTONS.

Here's the solution:

http://forum.xda-developers.com/showthread.php?t=485732

[cmalamute]

thanks so much man!!! :D its weird, this even works fully on my touch hd... before that I couldn't get a single version of srs wow to work... really weird :)

Friends,

I am a very big fan of SRS on the Raphael and I tell you the application plugin is pain to get working....

Steps

1. Install SRS_WOW_HD 121.CAB and reboot the ppc
2. Install WOWHD_ARM_Panel.cpl
3. Change the registry entries before going into the app.
4. Goto: [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
5. Change "Flags"=dword:00010000 to "Flags"=dword:00010002
6. Launch SRS WOW from the settings and use the screen shot I supplied. I like the heavey bass thumping sound, so these are my settings.

....

[95FormulaTA]

:DThanks so much tvos, after two hard resets yesterday, I though I'd give it one more shot when I came across this post. It works great on my vogue! I noticed I didn't have a "Flags" dword in my WaveDev so after creating this and a soft reset it works perfect. Now it makes that Parrot Bluetooth FM transmitter all the better in the TA! Thanks again.

[tvos]

np... this fix is from someone elses's earlier posting. it worked like a charm.

also, check out my other post on SRS which is a snapshot of my settings, details etc..

tvos

[95FormulaTA]

Well I spoke too soon, :( seems this locked up my screen when it went into power save mode. Had to soft reset to bring it back. If it was left inactive for an amount of time it would not come back to life. :( big bummer for me. Hard to go on without it now that I had a taste of how great it works. Anyone have a solution for this issue?

[tvos]

srs wow is a bugger to get it to work and when it does. life is sweet!

as I mentioned in the previous post about the settings, screen shot etc. i really do think there is something about the chipset on the phones that determine if it will work or not. i have already been through four fuze phones and two didn't work, same settings nothing changed - no luck and the other two did right out of the box.

my recommendatin is to do a system reset hard and install the app and panel, reboot and then see if it produces the extra bass etc..

tvos

[myn]

Anyone tried the new v1.5.1.0 that just came out?

[tvos]

when did this arrive?

if i can recall, this version has been out for sometime now. i tried it and didn't work for beans. i stick with what does work vs. having to spend zillion hours again getting it to work..:)

tvos

[jaskiratsingh]

Guys,

I am using Asus P320 with WM6.1. I have installed SRS WOW and also ensure that the orignal driver is in OldDriver but this doesnt work for me. It gives me an error message "There is no WOW HD Driver loaded. The panel will now exit".

Soft resetting the device didnt help either.

Pls assist

[tsalta]

Hello guy`s for all who have problem with this app my advice is better don`t install it.. will explain why!
I try it befor a few days and i had the same problem with "There is no WOW HD Driver.. etc" so i try few diferent things and restart the phone again nothing BUT i found few bugs.. when i install this app i saw that my stock Music player can`t play any song from my lib.. and that`s not all my device totally lose all sound notiffication for example the animation sound of HTC when restart just miss and every program with have a sound etc.. just stop so i was not able to play any music with Mort Player also.. and i was totaly confused.. after all this i just uninstall this WOW SRS HD app soft reset the phone and all was perfect.. all sound come back and the phone work like befor so i told to myself i don`t need this app when have new improved version maybe!
Im using HTC Touch HD

Regards

[dancemacabre]

Need guide on how to install this on Xperia X1.. Looking at 1st post with alot of ???? now ~_~"

And.. this works on Xperia? Hope someone can clarify this.. hehe

[ljepava]

I installed SRS WOW HD v1.5.1.0 on my HP Ipaq 214.
After installation, when the setup is run, it says "There is no wow HD driver loaded. The control panel will now exit".
Do i have to change some registy values so it would work?

[alexirsi]

Did you already make a soft-reset? ;)

[jaskiratsingh]

Did you already make a soft-reset? ;)

Yes. Soft Reset already done but still same issue

[tarmpung]

SRS WOW HD is working well on my PPC.However, I still have a little problem...The settings can never remain whenever I do soft reset...Anyone helps me, plzz...

[iPodNazi]

I am not a dunce but I cannot get this app up and running.

I have used the previous version for ages with no probs, but since I have tried to upgrade to this version I have had no luck, I keep getting the message that the drivers are missing, I have installed the Wavedev time after time but still get the same result, I AM doing a soft restart as advised but with no luck each time.

Please tell me exactly where i am supposed to install the WaveDev app, I am not confident enough to start messing around with my device registries, I thought the WaveDev would avoid having to do that!

Please help if you can I am at risk of self in inflicted baldness (I am ripping my hair out with frustration):confused:

[homer285]

thanks so much man!!! :D its weird, this even works fully on my touch hd... before that I couldn't get a single version of srs wow to work... really weird :)
hmmmm.. I tried this and it works yes, however, WMP volume control is unresponsive and srswowhd does not respond with WMP(for me). The sound in WMP however is great lots of bass and very crisp its as-though the srswowhd is running on preset, changing the values makes no difference though.

srswowhd is working ok with coreplayer, sounds strange but music through WMP seems better and more crisp. My decision to install srswowhd was to increase sound quality and bass so that I didnt need 3rd party apps such as coreplayer, this spoils it for me (unless there's some fix?) I will keep trying other methods.

[Xventure]

Need guide on how to install this on Xperia X1.. Looking at 1st post with alot of ???? now ~_~"

And.. this works on Xperia? Hope someone can clarify this.. hehe

Yes,it does work on X1 if you got a right one.You should feel lucky because i have spend lot of time to find out and i don't hope you in my situation before.I just got it,go to pages 9,no.86 post,pick the v1.21 to install,it works for me while others just don't.

[bhe5]

does this work for the samsung omnia i910

[tego]

I confirm that the Tvos' guide works on my Raphael. Thanx.
Btw. I had value flags=0 in registry but I changed it as advised.

{the guide is here http://forum.xda-developers.com/showpost.php?p=3334822&postcount=411 }

EDIT>
Well..it worked..but it caused lock-ups. I never needed stylus so often as yesterday :-D I had to uninstall it because my phone didn't wake me up this morning - due to lockup.

[dancemacabre]

Edit: Found solution, it's working now.

1. install: srs wow hd 1.21 at 1st post and soft reset

2. Volume hack - use registry editor and go to Hkcu/controlpanel/soundcategories/attenuation

3. there are 4 items. Edit the value of item named 2. the default value would be 1 or 2 i dont remember. you can change the value between 1 - 5. I put 4 for mine.



@ Special thanks to the cab file maker n editor :)

@ Registry method (volume hack) found at another forum which i forgot the name.

@ If your X1 's sound gone, search xda for original xperia wavedev registry.

@ Not sure if it will work for everyone. Congrats if it works for u.

Sorry for rhe messy post, im lazy typing properly with my xperia keyboard.

[s_john8686]

I got a modded copy of SRS WOW HD 1.5.1 to work on my Xperia, but the volume control inside WMP still do not work.

I have embedded the registry above :(

[fabric0004]

Thanks Ill try it

[darebak666]

SRS WOW HD is working well on my PPC.However, I still have a little problem...The settings can never remain whenever I do soft reset...Anyone helps me, plzz...


I would also appreciate help about this.. :rolleyes:

[M_S_F_N]

Works perfect on iPaq hw6945!

Very very good sound now!:D

[O and O]

Is there any actually point installing this on my HD is there a massive improvement at all? I'm using Miri's 6.5 v6 if it helps.

[tvos]

Is there any actually point installing this on my HD is there a massive improvement at all? I'm using Miri's 6.5 v6 if it helps.

yes... don't know about miri's 6.5 and that app but SRS WOW hands down is the best audio plugin for the ppc and well worth the investment.

also, you asked "is there anya ctually point installing this" - is there actual point to even test a piece of software and bury your head in the sand?

you won't know until you try.

tvos

[Trakkiggio]

help me! i'm on panic!! installing the first reg file (wavedev.reg) on first post on my xperia i have lost my audio!!!!!

What have i to do??


i need the right registry file to restore my audio... help me please... and if anyone cann tell me the right way to make working this program on xperia i will be very grateful!!

[Georgeous2008]

I confirm that the Tvos' guide works on my Raphael. Thanx.
Btw. I had value flags=0 in registry but I changed it as advised.

Do we have to use decimals or hexadecimals ?

Worked great for me using decimals, however, I have experienced the same trouble, after 1-2 hours of screen off, it wouldn't switch on anymore, soft reset via styles and uninstalled it.

Using a Blackstone (Touch HD) with stock ROM version 1.14 WWE

[jeanmarctarabay]

it is installed fine, but after restarting the device no sound at all is coming from the device, so i had to remove it .can anything be done about this issue???

[eric_cymok]

This new version is NOT SUITABLE for O2 ATOM. After installed and softreset, the ppc will not working. Have to hard reset for the whole ppc. I already tried on my O2 ATOM. If have any soluion pls inform me. Thanks

[Arkinn]

My VX6800 windows 6.1 not worked. I tried a few times, it disabled my key sound and my ringer. It worked when I have Windows 6.0. Any VX6800 with Windows 6.1 works??? Please reply with instructions. Thanks!

[574ND410N3]

Do we have to use decimals or hexadecimals ?

Worked great for me using decimals, however, I have experienced the same trouble, after 1-2 hours of screen off, it wouldn't switch on anymore, soft reset via styles and uninstalled it.

Using a Blackstone (Touch HD) with stock ROM version 1.14 WWE

i have this problem too...
(i think i've solved it)
just setted the registry value back... the value just before the SRS WOW HD setup

hope that helps...

a little tip...
use "HD Tweak" for audio enhancement in volume gain... (for those who think its quiet)

[O and O]

Hey guys,

I installed it on my HD but now the music is far too loud through my headphones and changing the system volume does nothing. Also is this software working with Pocket Player?

[mpg187]

SRS Wow on my HTC would be sweet

[commando0]

how to make it work on touch hd
i am getting a driver load error

[ana3zoz]

how to make it work on touch hd
i am getting a driver load error

commando0 check my post here (http://forum.xda-developers.com/showpost.php?p=3613780&postcount=4)

but if someone can upload a .reg file for the default values of the "HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev" for the HD i'll be grateful

[ronaldodo]

I think lots of those who listen to music with their pocket pc will like it

Just copy on the pocket pc and install on main memory. Don't forget to Soft reset after installing.

It works well on my HTC TOUCH

If it doesn't work after having installed then softreset try the tip of ga!nusha:
"in order to make this wonderfull software work on every ppc you first need to check what is in [HKEY_LOCAL_MACHINE \ Drivers \ BuiltIn \ WaveDev] "DLL" and after install replace [HKEY_LOCAL_MACHINE \ Drivers \ BuiltIn \ WaveDev] "Old driver" with what was in "DLL" before install

work on my mio"

OR use that taken from the pda4x forum:
After install SRS WOW, reset, then install this reg(unzip the wavedev.zip attached), and reset...
Now you can use SRS WOW HD, really Great Apps...


Download link : http://forum.xda-developers.com/attachment.php?attachmentid=77865&d=1206612566

great job dude........:D

[hole_yu]

Do anyone have this problem of using this SRS Wow HD?

I install this on my HTC Touch HD and my volume cannot be adjust after playing a music for sometime (lesser then 3 mins). it is like the volume level on the display are able to decrease or increase but the actual sound remains the same.
Do let me know. Thanks.

[nonegiven]

Works great on the Sprint Treo Pro except for volume control in Windows Media Player. Kinoma and CorePlayer work perfectly though and sound much better!

[DaFixer]

Hi SRS wow works great on my Touch HD.
But i can not increase of dicrease the volume :confused:

[ppcguy]

Try with HTC 3650 Touch Cruise

Install cab 1.21
go check registry and it did changed correctly but message no driver found shown
then do one soft reset and it's all you needed.
Also install the option file for ARM. And it's great.

Thks so much guy.

[TheDj2]

Hi everyone!

I had a SRS WoW HD program which has 2 more options in Trubass section. Those were an input and an output setting. I downloaded the latest version of SRS, but there are nothing in Trubass , only Trubass level and Speaker Size.

Does anybody know what version of SRS has input and output setting?

[TheDj2]

Hi everyone!

I had a SRS WoW HD program which has 2 more options in Trubass section. Those were an input and an output setting. I downloaded the latest version of SRS, but there are nothing in Trubass , only Trubass level and Speaker Size.

Does anybody know what version of SRS has input and output setting?

OK, i've found the answer for my question... :) It was simply to ask than read all posts in this topic ...
So..if you want to activate input and output controllers, please read this post:

http://forum.xda-developers.com/showpost.php?p=2265492&postcount=163

[drrkgupta]

Ok, I solved the problem with regedit mod (Samsung i780); here the cab and regedit file.

Bye.

I am not able to install this on my samsung i780 please help!

[Maviosi94]

it works great on my touch Diamond. without this program the sound was very bad, now its very great. thanks.:)

[tarun_kabra]

Installed SRS Wow HD then soft reset then registry edit then again soft reset. But not working on my Titan running on DC fixD 4.1.2. All sounds gone. Is there in any fix.

[Die Bruine]

I opened a topic in the Raphael section. Didn't search good enough I guess. Just to be clear, I never had any problems with the 121 version I am using. Not untill the switch to 6.5. This is what I did to get it working:

First I installed version 121 HD which didn't work.
Then I tried this version http://forum.xda-developers.com/attachment.php?attachmentid=150853&d=1233064230 1.51.
Again didn't work, back to the "no HD driver" error.
Then I tried to replace the old driver registry setting. Again it didn't work.
After that I tried importing this registry setting: http://forum.xda-developers.com/attachment.php?attachmentid=64200&d=1199363692
Indeed, that also did not work.
Then I removed 1.51 and re-installed 121HD, just to try the registry settings with that version. For some reason (I'm guessing because of the previous imported registry settings) 121HD now works perfectly. All sound is played through SRS WOW. Finally I can enjoy my music again. The version of 121 I use is called SRS_WOW_HD 121.CAB with a size of 174,4kB on my Raphael.

[namaste74]

I opened a topic in the Raphael section. Didn't search good enough I guess. Just to be clear, I never had any problems with the 121 version I am using. Not untill the switch to 6.5. This is what I did to get it working:

First I installed version 121 HD which didn't work.
Then I tried this version http://forum.xda-developers.com/attachment.php?attachmentid=150853&d=1233064230 1.51.
Again didn't work, back to the "no HD driver" error.
Then I tried to replace the old driver registry setting. Again it didn't work.
After that I tried importing this registry setting: http://forum.xda-developers.com/attachment.php?attachmentid=64200&d=1199363692
Indeed, that also did not work.
Then I removed 1.51 and re-installed 121HD, just to try the registry settings with that version. For some reason (I'm guessing because of the previous imported registry settings) 121HD now works perfectly. All sound is played through SRS WOW. Finally I can enjoy my music again. The version of 121 I use is called SRS_WOW_HD 121.CAB with a size of 174,4kB on my Raphael.

I've been using the WOWHD_ARM_BT_Fixed.cab from ppc geeks, it work on first install but breaks volume control. Are you having the same? In otherwords, sound works fine, just can't adjust volume other than on my BT headset.

[Die Bruine]

The first time I tried to install 121 on build 21222, it didn't work. SRS loaded, but it did nothing to the sound and my volume control did not work anymore.

I would suggest you try the registry settings I posted, which by the way came from the front page I think (I have a very short-term memory :D). It's not just the old driver that's causing problems, its those other settings as well. You could try the settings tvos mentioned. But personally I wouldn't bother. Just import the settings, reboot and hope it works. If not, re-install 121 (with the imported registry settings intact) and it should work after a reset. In the worst case, you could try exactly what I did. It will only take you like 6 reboots :rolleyes:.

I would like te point out, again, that up untill 6.5 I never had any problems getting 121 working on whatever 6.1 build.

[prashanthsharma]

I installed the v 121 app but dont see a shortcut to the app anywhere. Am I missing something ?

Thanks,

[tyguy]

@prashanthsharma - Missing App link
Did you check in "Start - Settings - System"?

[prashanthsharma]

After installing the v 121 cab all sound on my HTC touch has disappeared. Anyone else see this problem ? Is there a fix ?

[Die Bruine]

Here's an idea... Why don't you tell us what phone you have and what ROM you're running ;)

[prashanthsharma]

Sprint Touch with the Official 6.1 ROM from middle of last year. Installed v 121. Anyone have this problem ? How did you solve it ?

[furry]

Sprint Touch with the Official 6.1 ROM from middle of last year. Installed v 121. Anyone have this problem ? How did you solve it ?

http://forum.xda-developers.com/showthread.php?p=3264167#post3264167
Ref post 400.

Same phone and Rom. I tried several builds and many reg changes but never got it working, from what I could dig up this will not work on Sprint touch??

[Die Bruine]

Forget my previous posts... I got it working, but only over a BT connection! I installed SRS_WOW_HD 121.CAB. Volumecontrol in mediaplayer/Manilplayer will not work over the internal speakers. The sound will also not change. But when you pair a BT headset or other AD2P device, SRS and volumecontrol will work! At least, it works on my Touch running Shaks 4.20 (WM6.1), Touch Pro RRE v2.1 (WM6.5 - 21222) and my girlfriends Touch Pro ROMeOS 1.95.3. I repeat :rolleyes: you will not hear a difference while listening to your internal speakers. Try it with a BT connection. And please post your findings here. I am very curious if this also works on other models. I used the same CAB on my Elf, and that also worked...

The even longer explanation here (http://forum.xda-developers.com/showthread.php?p=3766596#post3766596) (just so you can read what I did)

[tyguy]

@Die Bruine
AFAIK SRS O N L Y works through headset (either wired or A2DP).
OK you may connect your BT stereo headset to the AUX input of your car/receiver but ..

[Die Bruine]

Sorry Tyguy, I don't understand your question/remark.

Maybe some clarification from my side: I have an AD2P enabled car stereo. When I pair my phone with my stereo and listen to music thats on my phone, SRS WOW does have an effect on the carstereo. Which would make sense to me because it alters the sound before sending it over BT. It was just a remark because It doesn't work on the internal speaker. I used to own a Vox, and SRS WOW, on that phone, also worked over the internal speaker.

[ksdfosidjf4]

Hello,
I am new.
I have a Toshiba Portege G810 and when I install SRS it does not wake from standby. Does anyone know what the problem is and if there are any solutions?
Thank you

[Beniek]

be very carefull! installing this software may ruin your ppc... on mio a701 a hard reset is required.. and at some htc devices too...

right :mad: on HTC a hard reset is required

[bonesy]

Anyone noticing you cant adjust the sound with this dll? I cant notice any difference in sound quality either?

[pete338]

I think lots of those who listen to music with their pocket pc will like it

Just copy on the pocket pc and install on main memory. Don't forget to Soft reset after installing.

It works well on my HTC TOUCH

If it doesn't work after having installed then softreset try the tip of ga!nusha:
"in order to make this wonderfull software work on every ppc you first need to check what is in [HKEY_LOCAL_MACHINE \ Drivers \ BuiltIn \ WaveDev] "DLL" and after install replace [HKEY_LOCAL_MACHINE \ Drivers \ BuiltIn \ WaveDev] "Old driver" with what was in "DLL" before install

work on my mio"

OR use that taken from the pda4x forum:
After install SRS WOW, reset, then install this reg(unzip the wavedev.zip attached), and reset...
Now you can use SRS WOW HD, really Great Apps...


Download link : http://forum.xda-developers.com/attachment.php?attachmentid=77865&d=1206612566

Will this work on Sony Xperia?
Thanks!

[FlashT]

How do I make sound louder with this?

I found this thread ( http://www.ppcsg.com/index.php?showtopic=100965&st=10 ) and as i understand its referring to this driver, but after installation and change of those reg settings ringtone isnt louder at all ... why?

[crajee]

Sounds very good on Blackstone. But you lose ability to control volume completely. So un-usable. What a shame..

[stylez]

Thought i'd give it a shot as tryed it on Dash and didn't find it did much except amplification to which affected sound quality......
Anyway so installed on Tilt same again amplification treble and base squashed gives a umph but awful sound quality, disable and oh my god what's that's worse than without, uninstall back to pristine sound of PocketPlayer with SHAK BT headpohones.

[CRE]

For those who missed it, this program is not an amp! Amplification is a side effect of certain settings but it is not what the program was designed for and is really only of any use if you like a VERY specific type of sound effect or style.

Also, in the main screen there are two pull down menus, make sure you select the correct one for the output you are using. On my phone the two options are: Internal (Stereo) and Headphones. My phone always reset to the Internal (Stereo) after a reset and even though the settings are the same (even in the registry) the resulting sound is VERY different between the two. I had to make a registry change to get it to load with "Headphones" after a reboot.

[tendomentis]

For those who missed it, this program is not an amp! Amplification is a side effect of certain settings but it is not what the program was designed for and is really only of any use if you like a VERY specific type of sound effect or style.

Also, in the main screen there are two pull down menus, make sure you select the correct one for the output you are using. On my phone the two options are: Internal (Stereo) and Headphones. My phone always reset to the Internal (Stereo) after a reset and even though the settings are the same (even in the registry) the resulting sound is VERY different between the two. I had to make a registry change to get it to load with "Headphones" after a reboot.

What registry entries did you make or modify to get it to default to headphones on reset?

[shinobi26]

ok.. so i have an LG Incite, i installed this before looking at the default Reg value. can someone help me?

[OxYTooN]

ok.. so i have an LG Incite, i installed this before looking at the default Reg value. can someone help me?
Hi all !!!

I found a nice solution for this (but it's in french... sorry...)
http://www.clubic.com/telecharger-fiche283998-srs-wow-hd.html

to resume, you have the download file.
If after a soft reset the app still doesn't works, there is a REG file to download and execute to solve the problem.
And it works on my HTC Blackstone with Dutty's WM6.5 R3 !!!

[OxYTooN]

ok.. so i have an LG Incite, i installed this before looking at the default Reg value. can someone help me?
Hi all !!!

I found a nice solution for this (but it's in french... sorry...)
http://www.clubic.com/telecharger-fiche283998-srs-wow-hd.html

to resume, you have the download file.
If after a soft reset the app still doesn't works, there is a REG file to download and execute to solve the problem.
And it works on my HTC Blackstone with Dutty's WM6.5 R3 !!!

[rajnicho22]

I'm also interested in the registry modification for a default to headphones. Any help would be greatly appreciated.

[ipporek]

Well, after installing SRS Wow, my volume control no longer works.

[original_ganjaman]

Well, after installing SRS Wow, my volume control no longer works.

Same here. i am using miri v23 (wm 6.5). it worked great in v19. mabe it has something to do with htc volume control. it is a shame because i found it greatly improves sound quality. i have tryed different versions but no luck.

[Soulcast]

Be warned, SRS WOW is dangerous. I have a HP 110 clasic. when i put SRS on my pda, it f***** it up bad. It completely shot the audio system on my pda! If i hadnt backed up my data with SPB backup the night before, I WOULD BE P*****! SRS IS DANGEROUS! DON'T INSTALL THIS BULL S*** POGRAM UNLESS YOUR BACKED UP!

[vbox]

I'm also interested in the registry modification for a default to headphones. Any help would be greatly appreciated.


If your device is with WM6 and up, follow these steps:
Go to HKLM\System\State\Hardware and create DWORD key, named Headset and type value 1 in decimal.
Softreset
Enjoy

If device with WM6 and up suspends and cannot wake up, after installing go with your registry editing program to HKLM\Drivers\Builtin\BtA2dpSnd and delete "Flags" key.
On Samsung i900 Omnia that solves the problem.

[OzanSRC]

Someone who have Benq E72 could give me the original Wavedev and dll files. I installed SRS Wow but forgot to backup my registries so plz someone upload them for me :(

[Sparkling Sapphire]

I have the SRS.WOW.HD.v1.28.5.0.ENG.RUS.WM5.WM6

when i try t use it
it says there is no driver

[funguru]

dnt use it on OPAL it will screw up audio drives.. if u edit reg

[lambstone]

When installed in a Touch HD, everything works. EXCEPT controlling the volume. Is there a fix for this?

[Designerdigital]

i know sounds dumb, but how do u soft reset the phone? i just installed this in my lg incite

[fktoss]

You can press and hold the 'Hang up' until a window pop up asking if you're want to shutdown, press 'Yes'. Or you can just pop out the battery. In my experience, WOW SRS HD do not works with LG Incite and cause my phone to lost ring tone and volume. Phone became totally silent, volume adjustment do not work....I had to do a hard reset to get my volume back. Good luck.

[VelJharig]

Just a report from the field here... I have SRS WOW HD working on the CDMA version of the HTC Touch Pro2, with volume control functionality intact. After trying about a dozen different versions of the various cabs and registry settings, I found that the attached version works. After installation of the cab, you will need to go into the registry and modify the registry to change the value of the key HKLM\Drivers\BuiltIn\WaveDev\"OldDriver" to "btcedrivers.dll". No surprise there, as that is our original driver on the CDMA TP2 (and I presume the GSM version, but I can't verify that).

If you don't want to mess with your registry keys, I've exported my "WaveDev" branch as a .reg file; it is attached for those that would prefer to use it. I'd also recommend using the improved SRS WOW control panel (also attached) by copying it into the \Windows directory on your device. Finally, restart your device to activate the changes and then test your setup.

This setup for SRS WOW HD seems to work great with Bluetooth stereo headsets such as the Jabra BT3030, and also with headphones plugged directly into the TP2. Most other variants that I tried of the cab files and registry modifications resulted in no sound at all for the TP2 after a restart (though sound would come back after uninstalling the cab and restoring the original registry entries).

****************

If you have a bluetooth stereo unit that can support it, I'd also recommend one additional registry tweak that I just finished hunting down this afternoon. Our BT stack on the TP2 is the WIDCOMM version, so you can't use the standard MS bluetooth stack registry tweaks from the Touch Pro to improve the sound, or the ones included in some of the common utilities (such as Advanced Config). To improve your connection quality for BT stereo, go to the following registry branch:

HKLM\SOFTWARE\WIDCOMM\Plugin\AV

Create a DWORD key called "LineSpeed", with a decimal entry of "480". That's a fairly high bitrate speed for your BT connection, but the TP2 hardware and a BT3030 headset seem to handle it without any issues. Restart your device to activate the new settings.

As an alternate, you can also give the DWORD entry a value of "320", and that is recommended if you have any problems with your bluetooth headset disconnecting at random intervals (reported with older devices in some other forums). You really only need an entry of "480" if you have fairly high bitrates on your MP3s, and a good quality set of headphones. I can notice the difference between the two settings when listening to 320kbps MP3s using a BT3030 headset with a pair of Sleek Audio SA6 headphones, but your mileage may vary.

I hope this is helpful to some folks out there, as I hadn't seen anyone give a solution for TP2 devices and SRS WOW HD yet.

Cheers,

--VelJharig

****************

P.S. - Noticed that I started having more issues with the device not resuming correctly from suspend states after this install (device would hang). Removing the SRS WOW driver resolved the issue completely, so I then went searching for similar problems. Apparently the Omnia i900 has a similar power-related driver issue with the SRS WOW drivers, and some folks here posted a fix:

http://www.modaco.com/content/i9x0-omnia-http-omnia-modaco-com/287879/important-update-srs-wow-hd-1-5-1-crash-fix-please-try/

The gist of the fix is that you have to tell WM that the driver needs to be initialized each time a power state changes, by adding the following registry keys in:

HKLM\System\CurrentControlSet\Control\Power\State\ Suspend

Add DWORD "wav1" with decimal value :00000004
Add DWORD "wav8" with decimal value :00000004

Details on the fix are in the thread linked above. It seems to have helped, but not resolved the suspend issue for me, so I'd recommend adding this to the list of install steps for testing with other devices.

[raz0r09]

@VelJharig

I just installed your Package and I already restarted my device. Now, first of all I can´t realize any changes to the music when SRS WOW is enabled/disabled. I already tried diefferent sound profiles, but I can`t hear any changes!?
I have to import your .reg file, but which program does it? Total Commander and SGS Explorer aren´t able to do this. Which program can import the whole .reg file?
Do you hear any changes to your musci with SRS WOW enabled?

I am looking forward to hear from you soon!

Best regards ...

[VelJharig]

@VelJharig

I just installed your Package and I already restarted my device. Now, first of all I can´t realize any changes to the music when SRS WOW is enabled/disabled. I already tried diefferent sound profiles, but I can`t hear any changes!?
I have to import your .reg file, but which program does it? Total Commander and SGS Explorer aren´t able to do this. Which program can import the whole .reg file?
Do you hear any changes to your musci with SRS WOW enabled?

I am looking forward to hear from you soon!

Best regards ...

Hi raz0r09,

I use Resco file explorer (there is a trial version) to import the reg files, and the Resco registry editor that comes with it to review my changes (or directly alter them). I would strongly recommend that people use something like the Resco registry editor to export the following branches _before_ modifying your device, so that you can roll back changes if that is needed:

HKLM\Drivers\BuiltIn\WaveDev\
HKLM\Drivers\BuiltIn\BtA2dpSnd\

While the uninstall should reverse any critical registry changes (and it has worked for me during testing), I'd never want to count on that myself. If you get stuck, I have the original registry settings from my device (though I wouldn't guarantee complete compatibility unless you have a Telus-supplied TP2).

I do hear a significant difference between SRS WOW on and off, through bluetooth stereo and directly connected headphones (the specific ones I use are a Jabra BT3030 bluetooth stereo unit with a pair of Sleek Audio headphones). The difference through the standard speakers on the TP2 is very slight, by comparison, but still noticeable. I suspect if you are not hearing any differences through the standard speakers, that would be because the basic cab install is missing the correct "olddriver" key for our WaveDev device (the .reg file installs the correct one, or you could manually edit the entry with the information I provided in my original post using something like Resco's registry editor).

One word of warning... I am still having problems with device hangs when the unit goes into suspend mode with the SRS WOW driver installed. I've been trying multiple combinations of driver registry edits, power state edits, and other information that I can glean from sites that are reporting on similar issues with suspend states and SRS WOW HD (with the Omnia and Toshiba TG01). I've also been trying to build patterns on when the device locks vs when it doesn't, but I don't have a handle on the pattern yet. I can go through hours in which there are no issues, and then a set where every time I hit the suspend button the device locks.

With that said, I can very consistently clear up all suspend lock-up issues by simply uninstalling the SRS WOW HD cab (I've been doing that during the day because I need a reliable unit for work, and then reinstalling versions of the SRS WOW driver to play with settings each evening). I haven't found a working combination with the SRS WOW driver that is stable yet. So... we have sound, but it's not working properly with power management for our device yet.

Hope that is helpful; let me know if you have additional questions.

[pimppoet]

Hi raz0r09,

I use Resco file explorer (there is a trial version) to import the reg files, and the Resco registry editor that comes with it to review my changes (or directly alter them). I would strongly recommend that people use something like the Resco registry editor to export the following branches _before_ modifying your device, so that you can roll back changes if that is needed:

HKLM\Drivers\BuiltIn\WaveDev\
HKLM\Drivers\BuiltIn\BtA2dpSnd\

While the uninstall should reverse any critical registry changes (and it has worked for me during testing), I'd never want to count on that myself. If you get stuck, I have the original registry settings from my device (though I wouldn't guarantee complete compatibility unless you have a Telus-supplied TP2).

I do hear a significant difference between SRS WOW on and off, through bluetooth stereo and directly connected headphones (the specific ones I use are a Jabra BT3030 bluetooth stereo unit with a pair of Sleek Audio headphones). The difference through the standard speakers on the TP2 is very slight, by comparison, but still noticeable. I suspect if you are not hearing any differences through the standard speakers, that would be because the basic cab install is missing the correct "olddriver" key for our WaveDev device (the .reg file installs the correct one, or you could manually edit the entry with the information I provided in my original post using something like Resco's registry editor).

One word of warning... I am still having problems with device hangs when the unit goes into suspend mode with the SRS WOW driver installed. I've been trying multiple combinations of driver registry edits, power state edits, and other information that I can glean from sites that are reporting on similar issues with suspend states and SRS WOW HD (with the Omnia and Toshiba TG01). I've also been trying to build patterns on when the device locks vs when it doesn't, but I don't have a handle on the pattern yet. I can go through hours in which there are no issues, and then a set where every time I hit the suspend button the device locks.

With that said, I can very consistently clear up all suspend lock-up issues by simply uninstalling the SRS WOW HD cab (I've been doing that during the day because I need a reliable unit for work, and then reinstalling versions of the SRS WOW driver to play with settings each evening). I haven't found a working combination with the SRS WOW driver that is stable yet. So... we have sound, but it's not working properly with power management for our device yet.

Hope that is helpful; let me know if you have additional questions.

Thanks for your suggestions....worked after a combo of various reg edits. Turning "off" the wow driver seems to have fixed the standby problem,atleast for now. Test text & calls to myself went through with no problems aswell as the notifications for them.

[VelJharig]

Thanks for your suggestions....worked after a combo of various reg edits. Turning "off" the wow driver seems to have fixed the standby problem,atleast for now. Test text & calls to myself went through with no problems aswell as the notifications for them.

Hi pimppoet,

Has your system remained stable over the last week or so with the driver turned off via the control panel? If so, I'd be very interested in seeing the specific registry changes you made, or a dump of the following branches:

HKLM\Drivers\BuiltIn\BtA2dpSnd
HKLM\Drivers\BuiltIn\WaveDev
HKLM\System\CurrentControlSet\Control\Power\State
HKLM\Software\SRS

I've been going through alternate versions of the driver from other new devices (Omnia i9x0 and Toshiba TG01, for instance), and tried a number of registry configurations, but there are certain conditions under which my system will still have an SoD (suspend of death). I had played with a few variations in which the driver was turned off via the control panel, but didn't find a truely stable config.

Specifically, my system will remain relatively stable with most driver and registry variants if I toggle the driver off and then back on after a boot, and then specifically don't do any of the following:

1) Browse the web for a bit (1+ MB of traffic)
2) Check an email account that results in a large data transfer
3) Change the power state of the device (unplug or plug it into wall power or a PC).

As long as I do none of those things, the system will promptly return from a suspend state. If I do one of those, put it into suspend, wait about 30 seconds to a minute, and then try to power back on, most of the time it will have hung. Changing the power state after browsing the web is the most consistent method for hanging the device.

I was suspecting something about an interaction of the driver with the data connection and power states, but oddly enough, I don't seem to get the same hanging symptoms if I only use the Youtube app (so it's likely not just data access and power state changes). Disconnecting the data service before suspending the device doesn't seem to change the SoD symptoms.

So... if you have some registry values that seem to work consistently, I would love to compare them to what I'm trying right now.

***************

Side note:

Found a useful little service for automatically switching between Internal and Headphones profiles on SRS WOW. If you load the following cab (provided by ursus2400 at the XDA Flame user forum), it will start a service that automatically switches your SRS WOW profiles from Internal to Headphones and back, based on whether an appropriate bluetooth device is connected. It seems to work well in my testing so far. More information is below from the original thread.

Blue Ears SRS WOW profile service:
http://xdaflameusers.com/viewtopic.php?id=1566

Cheers,

--VelJharig