Please help,already got two bin from from same model

[falleny]

what a bad luck in 2008.
when i was flashing a cooked Excalibur rom to my phone my cat touched my usb cable with his tail...only touch. The cable did not disconect from the phone physically...but maybe the static or whatever effected...the RUU gave me a communication error and let me unplug the cable and battery for recovery.

but the result is bad, the phone stop boot in the first screen, and my uspl has been flashed to 1.33(it was uspl 1.11 before )

now the situation is...i can enter the bootloader(tri-color). but i can not flash other roms, I tried wm5 from dopod singapore and htc wm6 both give me an invalid ID error

my phone was from dopod taiwan....

please help, any advice suggestion will be appreciated...thank u

if anyone can offer a proper ROM file from DOPOD taiwan, that will be very useful...thanks in advance.

if there is someone who are using a dopod c720w from taiwan, please help to dump two files from your phone.
just run simlock.bat from attachment...thanks

please remove .zip extension for those bin file....thanks jockyw2001

[najaf363]

same problem with my jasjar i was upgrading and my light wentout and when i tried again it gave me invalid country ID and still no solution!!!!!!:confused:

[falleny]

thank you anyway....anyone have a working solution?
i am trying to use RUU_signed-with-uspl.zip
still downloading...and waiting for more help...:confused:

[falleny]

bad bad....i try to flash the RUU_signed-with-uspl.zip
it gives me
"the image file is corrupted"....how about now?
any help?

[jdhelstrom]

did u try a hard reset? i have no idea if it will help, but u might get lucky
-jd

[mar11974]

If you haven't got it fixed yet, you could try flashing from your SD card. I have done this with my T-Mobile Dash several times and it works. Search the forum and you will find the instructions I posted some time back. Hope this will help. From my understanding this is also the method used by manufacturers, but they have a special SD card they use for different utilities.

P.S. You must use a matching ROM (Vendor ID and CID) for your device with SD flash. T-Mobile Dash should be flashed with T-Mobile ROM, HTC S620 should be flashed with HTC ROM, Rogers... etc.

[falleny]

If you haven't got it fixed yet, you could try flashing from your SD card. I have done this with my T-Mobile Dash several times and it works. Search the forum and you will find the instructions I posted some time back. Hope this will help. From my understanding this is also the method used by manufacturers, but they have a special SD card they use for different utilities.

P.S. You must use a matching ROM (Vendor ID and CID) for your device with SD flash. T-Mobile Dash should be flashed with T-Mobile ROM, HTC S620 should be flashed with HTC ROM, Rogers... etc.

thank you, but the problem is that i can not find a proper ROM for my device, there is rom from "dopod singapore" "HTC" "TMO" "ROGER"....but none of those are from DOPOD taiwan....I tried the ROM from "DOPOD singapore" with no luck...

[falleny]

did u try a hard reset? i have no idea if it will help, but u might get lucky
-jd

thank u anyway....hard reset won't work....the flash process stopped at 24%...I think the OS part has not fully flashed into the device...

[mar11974]

thank you, but the problem is that i can not find a proper ROM for my device, there is rom from "dopod singapore" "HTC" "TMO" "ROGER"....but none of those are from DOPOD taiwan....I tried the ROM from "DOPOD singapore" with no luck...

Normal flash via USB or flash via SD card?

[falleny]

Normal flash via USB or flash via SD card?

via USB use RUU...any problem? haven't tried card flash yet...ok, one more try now.....its 5 A.M now...another sleepless night...

[falleny]

via USB use RUU...any problem? haven't tried card flash yet...ok, one more try now.....its 5 A.M now...another sleepless night...

no luck....sd flash gets invalid certification...:mad:

[falleny]

I don't know which keyword should I grep...but i do found some CID error and EXCA100 EXCA10000 there...

I believe the vendor ID is HTCS
48544353

also I can find
H...T...C...I...
M...A...G...E...
EXCA10000

[jockyw2001]

I don't know which keyword should I grep...but i do found some CID error and EXCA100 EXCA10000 there...

I believe the vendor ID is HTCS
48544353

also I can find
H...T...C...I...
M...A...G...E...
EXCA10000
The modelID is EXCA10000
The CID is not yet clear from your dumps.
I will check how you can easily find it.

[falleny]

i tried to dump the raw data with diffrent ROM update
something interesting...
I found EXCA20000 both in dopod singapore ROM and HTC WWE ROM
and found EXCA10000 when I tried to update USPL only

so I think EXCA10000 or EXCA20000 is something in the nbh file?

I found the diffrence between Dopod and HTC...
DOPOD001 in the dopod dump
HTC__001 in the HTC dump
11111111 in the USPL dump
in the same position of the raw date....I think this is vendor ID in the ROM and Model ID is the same EXCA20000 in both dopod and HTC rom.

bad news is that I still can not find my CID and Model ID....still struggling with those huge raw date...

[falleny]

i found the flash procedure already broken at 2%...but something still copying until 4%

I found it at row 655634
DO 48 54 43 45 HTCE
DI 4d 53 5f 43 45 52 54 5f 52 41 57 0d 0a MS_CERT_RAW..
DI 62 72 65 61 6b 0d 0a break..
DI 48 54 43 53 01 00 01 00 00 00 00 00 48 54 43 45 HTCS........HTCE
DO 70 72 6f 67 72 65 73 73 20 32 0d 00 00 00 00 00 progress 2....

mean less character stopped at row 131192
DO 48 54 43 45 HTCE
DI 4d 53 5f 43 45 52 54 5f 52 41 57 0d 0a MS_CERT_RAW..
DI 62 72 65 61 6b 0d 0a break..
DI 43 68 65 63 6b 49 6d 67 48 65 61 64 65 72 20 0d CheckImgHeader .
0a .
DI 44 65 76 69 63 65 20 4d 6f 64 65 6c 20 49 44 20 Device Model ID
3d 20 45 20 58 20 43 20 41 20 32 20 30 20 30 20 = E X C A 2 0 0
30 20 30 20 00 20 00 20 00 20 00 20 00 20 00 20 0 0 . . . . . .
00 20 00 20 00 20 00 20 00 20 00 20 00 20 . . . . . . .
DI 00 20 .
DI 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 . . . . . . . .
00 20 0d 0d 0a . ...
DI 48 54 43 53 02 80 02 00 00 00 00 00 48 54 43 45 HTCS........HTCE
DO 70 72 6f 67 72 65 73 73 20 34 0d 00 00 00 00 00 progress 4......

hope it helps

[jockyw2001]

No, all you see are the IDs of the image you try to flash and not the ones of your device :(

I have to play with my Vox bootloader and see if there is a command. Vox and Excal are very similar.

You could look up a thread I did in the Vox forum ("Vox bootloader" or so)

[falleny]

bump...and thanks jockyw2001 for all his help these days

[jockyw2001]

bump...and thanks jockyw2001 for all his help these days
My pleasure. The IDs of the excalibur you posted above are:
CID = DOPOD601
ModelID = EXCA20000

So your challenge is to find an official ROM which has these characteristics.

The description of such a ROM is very likely "traditional chinese (TCH) for Excalibur".

Any officially signed RUU_signed.nbh file which has the string DOPOD601 at offset 0x1E0 and the string EXCA20000 at offset 0x40 will do.