way to flash CID LOCKED device

[goran_cipko]

!!!BE SURE THAT YOU DO SOMETHING AT YOUR OWN RISK!!!
!!!FOLLOW MY INSTRUCTION FOR STEP BY STEP!!!

I want to say that Im not a real programmer, I found some way to flash CID LOCKED device and wrote only shell and collected some useful tools.

WARNING!!! IF YOU WILL SEE CMD WINDOW DON’T CLOSE IT!!!
WARNING!!! DON’T TOUCH YOUR PC OR DEVICE WHILE FLASHING!!!

! If you encounter error please DONt hard reset and try the following steps:
1. Disconnect USB cable and reconnect again
2. Wait until activesync is fully connected
3. Setup EnableRapi.cab again and reboot
4. Run ShellTool again and folow the steps



Let’s begin
1) You should disable your antivirus and firewall, close all active application at first
2) Download ROM what you want to flash at your device
3) Place nk.nbf to the ShellTool directory
4) Connect your device with usb ActiveSync, then copy Cert_SPCS.cab and EnableRapi.cab. Then setup them to the main memory. Wait some time and reboot your device. After reboot you should turn off your radio module on your device!!!

[ValdikSS]

hmm, interesting...
but not so usable again... activesync...

hoo)) russian)
здарово йопта) скажи номерок аси)