Atom flash ROM Success, stuck at Update Utility Screen

[bennyyen]

Dear All,

My Atom flash wm5 ROM everything successfull, but when i cold reboot or normal reset, always go to Update Utility Screen. Can't go into the system.

Anybody can help me ?

Thanks in advance,

Regards,

[brian_2cool4u]

Dear All,

My Atom flash wm5 ROM everything successfull, but when i cold reboot or normal reset, always go to Update Utility Screen. Can't go into the system.

Anybody can help me ?

Thanks in advance,

Regards,

Try to reflash it again, got the same problem before. Check if you can go to bootloadler and reflash.

[bennyyen]

Try to reflash it again, got the same problem before. Check if you can go to bootloadler and reflash.

Thanks for your reply, can u guide me how to go to bootloader and reflash ?

[brian_2cool4u]

Thanks for your reply, can u guide me how to go to bootloader and reflash ?

put device in boot loader mode press "camera button + reset". If boot loader is not working. just try to reflash the unit again using DSUU, but make sure your unit still have ample enough of batt.

or try other suggestions posted in here. (http://forum.xda-developers.com/showthread.php?t=267505)
but for me above mentioned steps work.

Hopes this one may help you

[tjkhattak61]

put device in boot loader mode press "camera button + reset". If boot loader is not working. just try to reflash the unit again using DSUU, but make sure your unit still have ample enough of batt.

or try other suggestions posted in here. (http://forum.xda-developers.com/showthread.php?t=267505)
but for me above mentioned steps work.

Hopes this one may help you
Thanks brother it helped my Atom Exec also (Oh I was sweating :D).

[brian_2cool4u]

Thanks brother it helped my Atom Exec also (Oh I was sweating :D).

No problem, I was sweating and crossed my finger when that happend to my unit before. I thought i'll say goodbye to my atom.

glad to help =)

[bennyyen]

I use Chinese Version WM6 ROM to flash it, for Step 1 CE ROM update are successfull, but Step 2 Bootloader get error, can't flash.

Without touching anything ( Remove cable or reset ), i try to use English Version WM5 ROM to flash it, Step 1 CE ROM update stuck in 0%, device screen blind. Wait for 5 min, still maintain 0%. Try to reset, can see O2 welcome pic, wait for a moment can go to setup screen, everthing is ok. Go into system try other function all can work, but when i reset. It return back to Update Utility Screen, same as previous problem again, put in battery automatic go to Update Utility Screen. Can't go into system again !

Anyone can help ?

Thanks in advance !

[homer285]

Where did you aquire this Chinese rom, perhaps you must ask the author or you could keep reading, try the Wiki!

[tjkhattak61]

I use Chinese Version WM6 ROM to flash it, for Step 1 CE ROM update are successfull, but Step 2 Bootloader get error, can't flash.

Without touching anything ( Remove cable or reset ), i try to use English Version WM5 ROM to flash it, Step 1 CE ROM update stuck in 0%, device screen blind. Wait for 5 min, still maintain 0%. Try to reset, can see O2 welcome pic, wait for a moment can go to setup screen, everthing is ok. Go into system try other function all can work, but when i reset. It return back to Update Utility Screen, same as previous problem again, put in battery automatic go to Update Utility Screen. Can't go into system again !

Anyone can help ?

Thanks in advance !
I had the same problem, read this it might help.http://forum.xda-developers.com/showthread.php?t=358442

[bennyyen]

I had the same problem, read this it might help.http://forum.xda-developers.com/showthread.php?t=358442

Thank you for your help, now can go into system. But no radio, want to flash in Active Sync, show me Country ID Error, into Bootloader flash, show me connection error. Would you mind to help in this also ?

Thanks in advance !

[brian_2cool4u]

Thank you for your help, now can go into system. But no radio, want to flash in Active Sync, show me Country ID Error, into Bootloader flash, show me connection error. Would you mind to help in this also ?

Thanks in advance !


if there is no radio, could have been a flash problem. try to reflash it again.
try changing USB cable aswell :p it can be a faulty one

[bennyyen]

if there is no radio, could have been a flash problem. try to reflash it again.
try changing USB cable aswell :p it can be a faulty one


Thanks brian_2cool4u, will try later...:)

[bennyyen]

Already test in 4 different USB cable and in different computer also. Still display Country Error in Activesync and Connection Error in Bootloader....:confused:

[brian_2cool4u]

Already test in 4 different USB cable and in different computer also. Still display Country Error in Activesync and Connection Error in Bootloader....:confused:

Hmmmmm thats odd? it should have been fix, oh well better get advice from where you got the rom :D or do a little reading in the wiki

[bennyyen]

Already can connected and flash any ROM, but new problem come out.
Comupter stuck at Stage 5 0% among 3 hrs :( still maintain 0%, but my device show Burn Radio MOT 100% completed :confused:

So i try to unplug the USB cable, my computer immediatly show Connection Error. After i hard reset my device, everything OK except No Radio ( NO GSM ).

Any advise :confused:

Thanks & Regards,