Personalizer 2.0 - Change operator Name !

[NP9660]

This is one handy tool, it's a simply program that let you change ALL the operator names inside your phone to whatever you whant. Because it also fix some problems with phones that show the 5 digit ID i tought i share with you all. Works almost on any device ! Cheers

Install to Main Memory and NOT to memorycard !

Developer: codyppc

[hcarrega]

very nice app:)
works fine
thanks

[illcaptive]

very awesome cab it is useless but fun thing to do, now i have "pimp mobile"

joe

[1loudsvt]

works on my phone until i make or receive a phone call

[ancola66]

Very good:D Thanks

[galaxys]

works on my phone until i make or receive a phone call

ok? and what phone, radio, rom, carrier, etc are using....

[skanndelus]

very awesome cab it is useless but fun thing to do, now i have "pimp mobile"

joe

i don't think it's useless, i used it to put my name on the today screen without the rest of the owner information, i think it's GREAT. i used to try and do it manually through the reg, but it defaulted every soft reset, so this thing is titts for me.

[NP9660]

Yeah it's great little tool. I used it because my operator showed the name from the paycards (Pay&Go) and i have a abo, so changed the name to the operator name.

[moochermick]

Great little program
Works a treat on my wizard.
Many thanks

[1loudsvt]

ok? and what phone, radio, rom, carrier, etc are using....

htc apache, helmi wm6 rom, verizon, any time i do something it reverts back :-(

[Botond]

When I uninstall this, my phone gets an error about not being able to run the mortscript. Is the uninstall supposed to delete every instance of the program?

[Merciless]

htc apache, helmi wm6 rom, verizon, any time i do something it reverts back :-(

you can easily do it in regedit

HKLM\system\state\phone\current operator name

[1loudsvt]

doing that it reverts back as well

[thorus]

I use a dual number sim (VODAFONE Romania) and it's not working for me. :(

[flaviopac]

Don't work for me....

After some second the operator name comes back....

I have tried also with the register editor.....

Anyone has a solution?

[MaxMotus]

Yeah same here i did it in regedit and after a few seconds it came back... except in "HTC Home" it has stayed which is where i see it most so kind of ok.

Even S2U2 it cam back after a few seconds!

MM

[flaviopac]

Yeah same here i did it in regedit and after a few seconds it came back... except in "HTC Home" it has stayed which is where i see it most so kind of ok.

Even S2U2 it cam back after a few seconds!

MM

Same thing......

[harry_01]

Gr8 work thanxs bro

[rohitsharman]

It works perfectly fine on my Universal WM5, operator name doesn't change even after soft-reset or while makin' or receivin' calls.
Great work, sport.

Cheers..

[theme freak]

works perfectly, thanks =) it only changes to our original operator name when the signal changes..after the signal is stabilize, it will be turn back to our name :D

[djhollygrove]

i have the mogul from sprint and it goes back to gay ass sprint pcs as well

[kwill]

thanks alot. it works great.

[Grondinm]

works great on my HTC Touch(CDMA Version) great job.

[rb32]

This worked for me, and you can use it even for more than one operator. And it will not be overwriten by the network unless you changed the network.
This is from another forum:

"With a registry editor, found the HKLM\Software\Microsoft\RIL\OperatorNames

Add a string value, the value name must be your "operator code" and the value data your operator name or a customized name.

Just next the operator name that you have chosen, put a space and normally there will be no missing character ...

Here is a link with a list of operator code that I found :

http://www.ioswebdesign.com/wp-content/uploads/2006/12/networks.csv"

[Mase_Mase]

When I uninstall this, my phone gets an error about not being able to run the mortscript. Is the uninstall supposed to delete every instance of the program?

I'm having the same problem. When I uninstall this program, i get the same error about not being able to run "mortscript.exe"

I have an Tilt running on AT&T

[Mase_Mase]

I'm having the same problem. When I uninstall this program, i get the same error about not being able to run "mortscript.exe"

I have an Tilt running on AT&T

Hi cody, i used the special .cab you posted on the treo forums and it solved my error problem. Thanks a lot!

[XTREEM|RAGE]

This worked for me, and you can use it even for more than one operator. And it will not be overwriten by the network unless you changed the network.
This is from another forum:

"With a registry editor, found the HKLM\Software\Microsoft\RIL\OperatorNames

Add a string value, the value name must be your "operator code" and the value data your operator name or a customized name.

Just next the operator name that you have chosen, put a space and normally there will be no missing character ...

Here is a link with a list of operator code that I found :

http://www.ioswebdesign.com/wp-content/uploads/2006/12/networks.csv"

This worked for me!! Tnx!

[luiggi]

Thankyou for shareing!

[mozillaxom]

Working great in my Himalaya WM 06
Many thanks for the Author....

Cheers
Mozillaxom

[brrrt]

This worked for me, and you can use it even for more than one operator. And it will not be overwriten by the network unless you changed the network.
This is from another forum:

"With a registry editor, found the HKLM\Software\Microsoft\RIL\OperatorNames

Add a string value, the value name must be your "operator code" and the value data your operator name or a customized name.

Just next the operator name that you have chosen, put a space and normally there will be no missing character ...

Here is a link with a list of operator code that I found :

http://www.ioswebdesign.com/wp-content/uploads/2006/12/networks.csv"

I don't have the OperatorNames folder in my RIL folder. The only folder in there is APIInfo. In my RIL folder are also no strings with the name OperatorNames (only Comport, Dataport, LastEquipmentS, RILProxyLogNormal and SMSService).

So do I have to add a Operatornames folder, or will that brick (or any other error) my TC?

[piphunter11]

hahha..it works great for me :))

[black_shadow69]

I can change the operator name with my name..........??:p

Thanks....:D

[badaas]

lovely, worx on my O2 networked cooked rom touched nike, so far so gooooood

thank u

[mwfielder]

Works great for me on my Verizon XV6900 (Touch/Vogue). I use it with the Diamond theme and it hides the "Verizon Wireless" (I replaced it with a " " (space only)).

However, I have one issue, and I have narrowed it down to the personalizer program. Every time I soft reset the device, the HTC home plugin comes back up. I don't use the HTC home plugin, but with every soft reset---it is back. If I remove personalizer from the startup menu, it doesn't happen.

Anyone else see this?

[mwfielder]

Well, I fixed my own issue by using Memmaid to remove the HTC Home plug-in from the today screen picklist. I'm sure its still there in the ROM, but not available for selection. Still, that was a weird thing to have....

[shaggylive]

This is one handy tool, it's a simply program that let you change ALL the operator names inside your phone to whatever you whant. Because it also fix some problems with phones that show the 5 digit ID i tought i share with you all. Works almost on any device ! Cheers

Install to Main Memory and NOT to memorycard !

Developer: codyppc

how about giving credit to the creator of this app..

codyppc

[the0ne]

Here is the Link to the developers thread @ PPCGeek : http://forum.ppcgeeks.com/showthread.php?t=21538

[chch]

This worked for me, and you can use it even for more than one operator. And it will not be overwriten by the network unless you changed the network.
This is from another forum:

"With a registry editor, found the HKLM\Software\Microsoft\RIL\OperatorNames

Add a string value, the value name must be your "operator code" and the value data your operator name or a customized name.

Just next the operator name that you have chosen, put a space and normally there will be no missing character ...

Here is a link with a list of operator code that I found :

http://www.ioswebdesign.com/wp-content/uploads/2006/12/networks.csv"
This did not work for me. My current operator name is "UMTS vodafone AU". Do I put the string value as "UMTS vodafone AU " (note the space on the end)?

[georo]

Working on Omnia Nice tool Thanks

[gplock]

worked great on my wm5 8125 with the Ifonz skin.Thanks

[TheChampJT]

Works great for me on my Verizon XV6900 (Touch/Vogue). I use it with the Diamond theme and it hides the "Verizon Wireless" (I replaced it with a " " (space only)).

However, I have one issue, and I have narrowed it down to the personalizer program. Every time I soft reset the device, the HTC home plugin comes back up. I don't use the HTC home plugin, but with every soft reset---it is back. If I remove personalizer from the startup menu, it doesn't happen.

Anyone else see this?

Look here:

http://forum.ppcgeeks.com/showpost.php?p=442363&postcount=45

[wapvirus]

Thanks great app works a charm on my prophet 6.1

[iTouch24]

has anyone tried this on htc touch pro cdma device ... or this is just for the regular touch