Very clean and stable WM6.1 roms for HP 6828 WWE b196 Update 21, /MUI/Atom/Kitchens

[prash0715]

Are you using 6828/18 or 6815?

am using 6828 n aii figured d problem after aii extract d files to d root aii hav to hard rest d device nw my device working 5n....
do u hav Hp ipaq audio software..soo ai can add in dat..???

[hochengsoon]

Hallo helloworld,thank you very much with your ROM. you are a great person. last time i use b95 rom. and now,I have just tried your b142 roms. there are so many great improvements,thank you very much. but when I want to install resco explorer 2008, it comes with message "old settings found.do you want to overwrite? choose yes or no." whatever I do comes with unsatisfied result, resco explorer unsuccessfully installed. i have reflashed with same rom and try with different version, ex: resco explorer 2007, but always the same result. finally i decide to left resco explorer and begin to use total commander.
another same problem presents when I want to install spb mobile shell 2.1. Installation is successfull, but the system become freeze/give no response. when I soft-reset the device, boot process become much slower and the system always give no response. then I tried to reflashed again and install another version of spb mobile shell 2.0/2.1, but it always come with same result.
now, choose not to install spb mobile shell.
can you give me some advices so I can use resco explorer and spb mobile shell again in your last rom?
thank you very much

I'm using SPB Mobile Shell without any issue. Install from PC onto Device. If you tried SD I don't advise so since it will be your primary interface.

[helloworld1]

Hi,

This may be a network/carrier issue? I figured that sometimes email arrives quicker and other times take ages.

For some reason I felt that the wm6/6.1"Push Email" is not as instantaneous as wm5 HP ROM... may be M$ has changed something?

I am using the same mail2web as well, and I pay the monthly personal account to have my email alias, very convenient.

K

M$ recommends using exchange server 2007 not 2003 with whitch MAIL2WEB used. ;)

[helloworld1]

am using 6828 n aii figured d problem after aii extract d files to d root aii hav to hard rest d device nw my device working 5n....
do u hav Hp ipaq audio software..soo ai can add in dat..???

Did you mean that it is working?
Ok, HP's Ipaq audio have 2 files:
audio.cpl
ipaqutils.dll
You can extract from HP's original ROM. If you can not do that. I will upload it for you days later if you notify me through PM.

[wallaceff]

Just a few quick questions to Helloworld1 ... I'm using a very old ROM and considering flashing my device soon, but there's the whole hastle of reinstalling all the apps again, so I want to put it off as long as possible.

Are you planning on releasing a new ROM soon as I'm reading about some problems here and there?
Also, I note there's newer 'core' versions or builds (or whatever MS calls them these days) available for the Atom. Do they offer anything more? Is there any reason to update your rom to one of those? Are you looking into it?

[prash0715]

Did you mean that it is working?
Ok, HP's Ipaq audio have 2 files:
audio.cpl
ipaqutils.dll
You can extract from HP's original ROM. If you can not do that. I will upload it for you days later if you notify me through PM.
yaa dude aii extracted it to d root folder den Hard reset d fone....its working out 5n..nywayz thnx fer d support :D okiee aii try to exract iPAQ audio frm WM5 ROm...

[hochengsoon]

Is there a way to delete selected SMS from the Inbox? I can delete selected SMS from Sent Item but can't figure out how from the Inbox. I intend to continue using the SMS thread if the suggestion is to disable it.

[prash0715]

man go to u settings u'll get dat sms thread disable option!!

[hochengsoon]

man go to u settings u'll get dat sms thread disable option!!

I don't wish to disable but selectively delete SMS from the Inbox only.

[prash0715]

k goo to d conversation ui wanna delete n hold on it delete itn simple yaar

[BesFen]

k goo to d conversation ui wanna delete n hold on it delete itn simple yaar

Are You Sure about it? I tried your suggest but cann't delete the selected conversation.

your suggestion only work if you want to delete convetsation with selected person, and you will delete all imbox and sent item with that petson.

[prash0715]

Are You Sure about it? I tried your suggest but cann't delete the selected conversation.

your suggestion only work if you want to delete convetsation with selected person, and you will delete all imbox and sent item with that petson.
wait tell me what exactly u wanna do .......dude...???!!!

[helloworld1]

Are You Sure about it? I tried your suggest but cann't delete the selected conversation.

your suggestion only work if you want to delete convetsation with selected person, and you will delete all imbox and sent item with that petson.

Of course you can delete a certain sms. Open a conversation, press up/down button and make the sms blue, then menu->delete.

[hochengsoon]

Of course you can delete a certain sms. Open a conversation, press up/down button and make the sms blue, then menu->delete.

Thx helloworld1. You are the one at the same frequency ;). All the while I was using the stylus. Thanks again.

[andrechua]

Hi helloworld1,

You have given new life to my rw6828. This is truly an amazing work and you've singlehandedly done what HP wouldn't do for it's hundred thousands of customer.

I've been using your b142 build for a week now and haven't encountered any issue. Everything seems to be working perfectly. Love my unit now with all the crap gone and a new OS to boot.

My "only" preference issue is with Cyberion Voice Commander (CVM) as I prefer to us MS Voice Command instead. If you remove it, it will give your user a choice on which app they prefer ... then we can call you ROM "extremely" clean. :-D

Alternately, can you provide some guide on how to remove CVM? I've manage to make a ROM dump of your b142 build using prepare_imgfs.exe and make_imgfs.exe but am lost in what changes to make and files to remove? Since you had remove CVM in you earlier builds, can you help out here.

BTW, a little something on the way. Not much but hope it's enough to buy a cup of coffee? :-D

Thanks. You're the MAAAAANNNNNN!

[helloworld1]

Hi helloworld1,

You have given new life to my rw6828. This is truly an amazing work and you've singlehandedly done what HP wouldn't do for it's hundred thousands of customer.

I've been using your b142 build for a week now and haven't encountered any issue. Everything seems to be working perfectly. Love my unit now with all the crap gone and a new OS to boot.

My "only" preference issue is with Cyberion Voice Commander (CVM) as I prefer to us MS Voice Command instead. If you remove it, it will give your user a choice on which app they prefer ... then we can call you ROM "extremely" clean. :-D

Alternately, can you provide some guide on how to remove CVM? I've manage to make a ROM dump of your b142 build using prepare_imgfs.exe and make_imgfs.exe but am lost in what changes to make and files to remove? Since you had remove CVM in you earlier builds, can you help out here.

BTW, a little something on the way. Not much but hope it's enough to buy a cup of coffee? :-D

Thanks. You're the MAAAAANNNNNN!

Yes, CVM is no use for me at all. I add it just for the completion of the ROM. It take about 2.5M of the rom space preventing me adding dotnet CF 3.5 and sqlce 3.5. Is it worthy to continue add this in the later release, I wonder? Maybe a pedition is necessary.
Also thanks very much for your coffee. Hope it will also bring me some good luck for tomorrow's GRE writing test.

Voice Commaner files:
-rwxrwxrwx 2 root root 9.1K 2008-01-15 20:56 AudioGain.dll
-rwxrwxrwx 2 root root 16K 2008-01-15 20:56 BSRTTSCom0.dll
-rwxrwxrwx 2 root root 24K 2008-01-15 20:56 CyberonPlugin.dll
-rwxrwxrwx 1 root root 28K 2008-01-15 20:56 CYBGSM.dll
-rwxrwxrwx 2 root root 32K 2008-01-15 20:56 DatabaseMgr.dll
-rwxrwxrwx 1 root root 73K 2008-01-15 20:56 Digit.dll
-rwxrwxrwx 2 root root 223K 2008-01-15 20:56 LexMgrDLL.dll
-rwxrwxrwx 1 root root 164K 2008-01-15 20:56 TTS0.dll
-rwxrwxrwx 1 root root 391K 2008-01-15 20:56 TTSData0.bin
-rwxrwxrwx 1 root root 35K 2008-01-15 20:56 TTSData0.dll
-rwxrwxrwx 1 root root 9.1K 2008-01-15 20:56 TTSMgr.dll
-rwxrwxrwx 1 root root 74K 2008-01-15 20:56 VCDaemon.exe
-rwxrwxrwx 1 root root 26 2008-01-15 20:56 VCDaemon.lnk
-rwxrwxrwx 2 root root 338 2008-01-15 20:56 VCDynamic.ini
-rwxrwxrwx 1 root root 39K 2008-01-15 20:56 VC.htm
-rwxrwxrwx 1 root root 20 2008-01-15 20:56 VC.lnk
-rwxrwxrwx 2 root root 21K 2008-01-15 20:56 VCSettingCPL.cpl
-rwxrwxrwx 1 root root 21K 2008-01-15 20:56 VCStatic.ini
-rwxrwxrwx 1 root root 115K 2008-01-15 20:56 VCWave.dll
-rwxrwxrwx 2 root root 108K 2008-01-15 20:56 VocabSetting.exe
-rwxrwxrwx 2 root root 114K 2008-01-15 20:56 VoiceCommander.exe
-rwxrwxrwx 2 root root 32 2008-01-15 20:56 VoiceCommander.lnk
-rwxrwxrwx 1 root root 286K 2008-01-15 20:56 VSRDLL.dll


Is it necessary to reatain Cyberon Voice Commander from HP in the next release? How about restore dotnet CF 3.5 or SQL CE 3.5 in the next release?

[helloworld1]

Just a few quick questions to Helloworld1 ... I'm using a very old ROM and considering flashing my device soon, but there's the whole hastle of reinstalling all the apps again, so I want to put it off as long as possible.

Are you planning on releasing a new ROM soon as I'm reading about some problems here and there?
Also, I note there's newer 'core' versions or builds (or whatever MS calls them these days) available for the Atom. Do they offer anything more? Is there any reason to update your rom to one of those? Are you looking into it?

i will release a minor update recently so you can wait a little.
also i always try out the newest build of ms's or oem build and here i lists some that i have tried and my experience.

xip;
19199-- kaiser's first build. some bugs but very stable.
19202-- ms's emulator version. slow but stable
19212-- kaiser's stable build. non-compatible.
19400-- beta rom.
19588-- diamond's build. not very stable. faster.
19591-- diamond's new build. same as above.
19900-- beta rom. very fast. stability ok.
19949-- [my current used] china mobile device used. stability ok and very fast.
20202-- not tested.
20226-- fake one. slow. stable.
20270-- maybe a fake one. slow. stability unknown.
20273-- Fast one.

sys;
19199-- buggy but stable.
19202-- slow and stable. high compatability.
19212-- very stable.
19214-- [my current used]kaiser's new build. very stable and compatibility is very high.
19588-- with copyright year 2008. seems faster but the compatability is very low.
19949-- fake one. no wwe sys released.
20202,20226-- beta sys.
20270-- from bepe's rom. buggy.
20273-- from imobile.tw. much fast and less buggy than 20270

my next release will still be based on xip19949 and sys19214. if you have great interest. i can give you a 19588 one. also i can upload a rom with 20270 xip.
these are all my personal experience on these xip and sys. if you feel sick about my comment, please close this tab.:D

[wach2006]

you can downland another sim manager in this forum.

Could you suggest me which one?

[javacom]

my rw6828 have new life, last time very slow......:p
im using mapking 2007 work ................:p
with my GPS....( HULUX )

THANK YOU !

[wallaceff]

i will release a minor update recently so you can wait a little.
also i always try out the newest build of ms's or oem build and here i lists some that i have tried and my experience.

xip;
19199-- kaiser's first build. some bugs but very stable.
19202-- ms's emulator version. slow but stable
19212-- kaiser's stable build. non-compatible.
19400-- beta rom.
19588-- diamond's build. not very stable. faster.
19591-- diamond's new build. same as above.
19900-- beta rom. very fast. stability ok.
19949-- [my current used] china mobile device used. stability ok and very fast.
20202-- not tested.
20226-- fake one. slow. stable.
20270-- maybe a fake one. slow. stability unknown.

sys;
19199-- buggy but stable.
19202-- slow and stable. high compatability.
19212-- very stable.
19214-- [my current used]kaiser's new build. very stable and compatibility is very high.
19588-- with copyright year 2008. seems faster but the compatability is very low.
19949-- fake one. no wwe sys released.
20202,20226-- beta sys.
20270-- from bepe's rom. buggy.
20273-- from bepe's rom. fast and less buggy than 20270

my next release will still be based on xip19949 and sys19214. if you have great interest. i can give you a 19588 one. also i can upload a rom with 20270 xip.
these are all my personal experience on these xip and sys. if you feel sick about my comment, please close this tab.:D

Ok. Now I see the difficulty you have putting a cooked rom together.
I guess newer is not better from what you're saying.
Do you think its worth starting a new thread, with a combination of the above xip and roms you've suggested, and try and get everyone to leave feedback as to what does/doesn't work. I'm not asking you to support each bug in those roms, but that way, the community can flash away and report back? This threat is getting VERY long... and if you're releasing a new rom... well, a new thread would help!

[helloworld1]

Could you suggest me which one?

I have made a fix in the new version of the rom. You can wait a day or two so that I can do more test.

[helloworld1]

Ok. Now I see the difficulty you have putting a cooked rom together.
I guess newer is not better from what you're saying.
Do you think its worth starting a new thread, with a combination of the above xip and roms you've suggested, and try and get everyone to leave feedback as to what does/doesn't work. I'm not asking you to support each bug in those roms, but that way, the community can flash away and report back? This threat is getting VERY long... and if you're releasing a new rom... well, a new thread would help!

Other people will handle these new versions. I don't have enough energy and time to do so. But I will try other people's new versions out and find my personal best. I want to concentrate on a stable core and make small fixes.

Also, the difference of all these versions are only speed, compatability, available memory, minor bugs and version numbers, that means no user interface changes, no new features.

I have planed to start a new thread, but what should I do other than copy the content of this thread? Maybe I would release WM7 in a new thread:cool: (I never promise that WM7 will work on 6828). I will only collect useful information in this thread and put it in the first and second thread.

[andrechua]

Yes, CVM is no use for me at all. I add it just for the completion of the ROM. It take about 2.5M of the rom space preventing me adding dotnet CF 3.5 and sqlce 3.5. Is it worthy to continue add this in the later release, I wonder? Maybe a pedition is necessary.
Also thanks very much for your coffee. Hope it will also bring me some good luck for tomorrow's GRE writing test.

Is it necessary to reatain Cyberon Voice Commander from HP in the next release? How about restore dotnet CF 3.5 or SQL CE 3.5 in the next release?


hi helloworld1,

Since I was the one who brought it up. Naturally I want it out from the new release.

To add on, my opinion is on what to keep and what to take out would be base on the questions

1. Will it make the ROM "clean"? - align with you purpose of "clean" ... anything not needed or has 3rd party options should be taken out -
example.
a. Your choice to keep the dailer clean - good.
b. Cyberon VC - not good as got other better option or some won't even use at all.

If anyone wants to use the particular apps... can just install ... no harm done.
beside ... how will you keep up with newer version of the software. ;)

2. If it's a base software that enhance the ROM?
example
a. CF3.5 --- good base to have but may not be necessary as not all apps would use it. But if required to make the ROM more stable and faster ... go for it.
b. SRS WOW HD -- made my unit sound superb and must have - increase the value of the unit in useability.
c. Camera - better than the original. good choice to replace.

my 2 cents ... :)

thanks for the guide .... i'll be cooking my "first" ROM tonight! :D

[helloworld1]

hi helloworld1,

Since I was the one who brought it up. Naturally I want it out from the new release.

To add on, my opinion is on what to keep and what to take out would be base on the questions

1. Will it make the ROM "clean"? - align with you purpose of "clean" ... anything not needed or has 3rd party options should be taken out -
example.
a. Your choice to keep the dailer clean - good.
b. Cyberon VC - not good as got other better option or some won't even use at all.

If anyone wants to use the particular apps... can just install ... no harm done.
beside ... how will you keep up with newer version of the software. ;)

2. If it's a base software that enhance the ROM?
example
a. CF3.5 --- good base to have but may not be necessary as not all apps would use it. But if required to make the ROM more stable and faster ... go for it.
b. SRS WOW HD -- made my unit sound superb and must have - increase the value of the unit in useability.
c. Camera - better than the original. good choice to replace.

my 2 cents ... :)

thanks for the guide .... i'll be cooking my "first" ROM tonight! :D

Do you mean that hp's original camera app is better or there are better replacements?

[helloworld1]

hi helloworld1,

Since I was the one who brought it up. Naturally I want it out from the new release.

To add on, my opinion is on what to keep and what to take out would be base on the questions

1. Will it make the ROM "clean"? - align with you purpose of "clean" ... anything not needed or has 3rd party options should be taken out -
example.
a. Your choice to keep the dailer clean - good.
b. Cyberon VC - not good as got other better option or some won't even use at all.

If anyone wants to use the particular apps... can just install ... no harm done.
beside ... how will you keep up with newer version of the software. ;)

2. If it's a base software that enhance the ROM?
example
a. CF3.5 --- good base to have but may not be necessary as not all apps would use it. But if required to make the ROM more stable and faster ... go for it.
b. SRS WOW HD -- made my unit sound superb and must have - increase the value of the unit in useability.
c. Camera - better than the original. good choice to replace.

my 2 cents ... :)

thanks for the guide .... i'll be cooking my "first" ROM tonight! :D

If you have cooking related problems, you can PM me.

Do you mean that hp's original camera app is better or there are better replacements?

[kusanagi]

...I have planed to start a new thread, but what should I do other than copy the content of this thread? Maybe I would release WM7 in a new thread:cool: (I never promise that WM7 will work on 6828). I will only collect useful information in this thread and put it in the first and second thread.

Not sure starting a new thread will make any difference. Based on the high activity on this thread, it will only take a few weeks before we have to jump through pages in the new thread, just like the current one, and some unawared people may keep posting on the old one, which can become messy. May be just stick to this old one and see it rocket through 10k posts!!! Until the topic is changed, may be WM7.

K

[kusanagi]

Yes, CVM is no use for me at all. I add it just for the completion of the ROM. It take about 2.5M of the rom space preventing me adding dotnet CF 3.5 and sqlce 3.5. Is it worthy to continue add this in the later release, I wonder? Maybe a pedition is necessary.
Also thanks very much for your coffee. Hope it will also bring me some good luck for tomorrow's GRE writing test.

...

Is it necessary to reatain Cyberon Voice Commander from HP in the next release? How about restore dotnet CF 3.5 or SQL CE 3.5 in the next release?

Yeah good luck with the test mate.

To be honest, I have never used VC once, other than a few quick tests. So whether this stay or not I don't really mind, so long it doesn't break anything that required it.

What does SQL CE do really? on a PDA phone.

K

[prash0715]

dude Hp original Camera is nt good....its yucky...bad....

[helloworld1]

Yeah good luck with the test mate.

To be honest, I have never used VC once, other than a few quick tests. So whether this stay or not I don't really mind, so long it doesn't break anything that required it.

What does SQL CE do really? on a PDA phone.

K

Removing VC will not break anything but save 1.7M Rom space so that I can make other enhancement.
SQL Compact Edition is required by some app like ?Sword(A bible app).

[kusanagi]

Removing VC will not break anything but save 1.7M Rom space so that I can make other enhancement.
SQL Compact Edition is required by some app like ?Sword(A bible app).

Not fuss with seeing VC go, but if all WinMo has it, may be should keep it.

I think if any applications that can be post installed by user, and new version will be released over time, then I don't see why it should be installed. But again, I'm not fuss.

SQL? Bible? err... if it is only useful to a small number of user/applications, I don't think it should be included.

So I think the ROM is fine as it is, just needs to weed out all the current bugs.

Just my 2c.

K

[helloworld1]

Not fuss with seeing VC go, but if all WinMo has it, may be should keep it.

I think if any applications that can be post installed by user, and new version will be released over time, then I don't see why it should be installed. But again, I'm not fuss.

SQL? Bible? err... if it is only useful to a small number of user/applications, I don't think it should be included.

So I think the ROM is fine as it is, just needs to weed out all the current bugs.

Just my 2c.

K

I have tested several days for certification problem but failed. But I have get "usb charge" working.

[kusanagi]

I have tested several days for certification problem but failed. But I have get "usb charge" working.

Oh OK, that's good, so it means usb charging will work regardless of cables and with or without the present of activesync? Another bug down!

You said M$ has fixed the later WM6.1 build with the certificate, would you consider using that "later build" as the base for future ROM? I guess that will bring other issues as you mentioned a couple threads back right? such as performance and stability issues.

K

[helloworld1]

Oh OK, that's good, so it means usb charging will work regardless of cables and with or without the present of activesync? Another bug down!

You said M$ has fixed the later WM6.1 build with the certificate, would you consider using that "later build" as the base for future ROM? I guess that will bring other issues as you mentioned a couple threads back right? such as performance and stability issues.

K

I have tried some later version (Chinese version 19588, 19949, 20270) made by other people but they all have certificate bug. I have asked many people but no good answers returned.
"Usb charge" is the HP's app that you can choose whether to charge or not. But it is related to the your problem. Seem like you can get non-working cables working by switching options of "Usb charge".

[kusanagi]

...Seem like you can get non-working cables working by switching options of "Usb charge".

Excellent! may be accumulate a few more other minor fixes before releasing a new ROM? unless other people don't want to wait.

K

[naset]

hp original camera quite sux.

i need an improvement on "hissing" sound when listening to music using earphone.it's sooo annoying!my friend's atom exec didn't have this problem at all.why rw6828 got all this prob... :(

[prash0715]

hp original camera quite sux.

i need an improvement on "hissing" sound when listening to music using earphone.it's sooo annoying!my friend's atom exec didn't have this problem at all.why rw6828 got all this prob... :(
try NCHOBANM's ROM or try Kumarans ROM

[naset]

try NCHOBANM's ROM or try Kumarans ROM
i've already tried NHOCBANME's latest build rom-19400.but still got that prob.im not trying Kumarans rom yet.maybe i should wait for helloworld1 to release his new rom.:)

[prash0715]

i've already tried NHOCBANME's latest build rom-19400.but still got that prob.im not trying Kumarans rom yet.maybe i should wait for helloworld1 to release his new rom.:)
actually Kumaras ROM is Excellent like Helloworlds aii hav no problem in d device its high speed RAM ok Camera Good Audio Perfect

[stick7]

...but kumara's ROM works on hp rw68xx as good as NHOCBANME and helloworld1?

[helloworld1]

...but kumara's ROM works on hp rw68xx as good as NHOCBANME and helloworld1?

I have ported a ROM with newest 20273 XIP & SYS & aku 1.3.3 from abusalza's exec rom. I can say this rom really s***s! Not only because its unstability but it does not fix anything including certification, GPRS prob and all! I am truely disappointed with newest 20xxx ROMs. Where did they come from. As far as I know, there is no real device with 20xxx builds. I think kaiser's rom is a better base rom.

Kumara's ROM is for atom not 6828.Garmin is a nice guy providing wonderful Tutorials but he convert to kaiser now.

After days of fruitless investigation, I will release the new rom today with very minor changes. The most major bugs haven't fixed: infred, certification. It is almost the same as the b142 ROM. Hope this won't get you too disappointed.

[naset]

@helloworld1
the message problem fix or not?it is very important for me.

juz fyi,everytime i delete the message in the inbox or other folder,it still there when i softreset the phone.

[helloworld1]

@helloworld1
the message problem fix or not?it is very important for me.

juz fyi,everytime i delete the message in the inbox or other folder,it still there when i softreset the phone.

I can not reproduce this bug. You can not reset right after deleting a message. You need to wait a moment, about 1 minute.

[naset]

i try enable sms sent notification,but still have no notification in previous rom b142.can i know why?

[helloworld1]

i try enable sms sent notification,but still have no notification in previous rom b142.can i know why?

It is working.
You need change the following registry:
\HKLM\Microsoft\inbox\settings:
SMSNoSentMsg=0

[hochengsoon]

@helloworld1
the message problem fix or not?it is very important for me.

juz fyi,everytime i delete the message in the inbox or other folder,it still there when i softreset the phone.

This also happen on the original WM5. Any immediate action of SMS will rollback after soft reset. So are just received SMSes, LOST!

[hochengsoon]

It is working.
You need change the following registry:
\HKLM\Microsoft\inbox\settings:
SMSNoSentMsg=0

Mine works without the need to change anything from registry.

[prash0715]

dude HP iPAQ rw6828 is an XDA ATOM or XDA ATOM PURE
plz tell me d difference..???am a bit confused.aii think it XDA ATOM Clone..:confused::confused::D
man can u tell me wat cooking tools r u using fer building ROMS fer HP iPAQ rw 6828 ..???? Am a bit confused wat to use n wat not to

>>???

[naset]

thanks helloworld1 and hochengsoon.all the problem was solved. :)

actually,im a newbie on windows mobile. :) before this im using e680i running montavista linux.
so,windows and linux much2 different.

[tyan888]

@helloworld1
the message problem fix or not?it is very important for me.

juz fyi,everytime i delete the message in the inbox or other folder,it still there when i softreset the phone.
Hey bro, I had that problem. I found it to be caused by apps installed like PhoneAlarm, VITO SMSChat. Caused a few times when I unceremoniously soft reset the device, typically when something hangs and it gets on my nerves.
So, my advice is, remove PhoneAlarm from TODAY screen. Then run this utility, downloadable as fixunreadcount.exe

More info available at:
FixUnreadCount v1.0 (http://freewareppc.com/communication/fixunreadcount.shtml)
http://freewareppc.com/communication/fixunreadcount.shtml

Remember to disable apps that manages your sms/e-mails status such as PhoneAlarm or VITO SMS Chat first before running the utility. Not that it harms your device in any way, just that it could be frustrating - waiting for boot-up just to see if it works just to find that it doesn't. So, do it right at first attempt. :D

Well, after you run it, soft reset. Fixes it.

[helloworld1]

Hey bro, I had that problem. I found it to be caused by apps installed like PhoneAlarm, VITO SMSChat. Caused a few times when I unceremoniously soft reset the device, typically when something hangs and it gets on my nerves.
So, my advice is, remove PhoneAlarm from TODAY screen. Then run this utility, downloadable as fixunreadcount.exe

More info available at:
FixUnreadCount v1.0 (http://freewareppc.com/communication/fixunreadcount.shtml)
http://freewareppc.com/communication/fixunreadcount.shtml

Remember to disable apps that manages your sms/e-mails status such as PhoneAlarm or VITO SMS Chat first before running the utility. Not that it harms your device in any way, just that it could be frustrating - waiting for boot-up just to see if it works just to find that it doesn't. So, do it right at first attempt. :D

Well, after you run it, soft reset. Fixes it.

Emm, this is an interesting app, thanks. The count of sms can get wrong sometimes?! I will reserve it for my first time to encounter this problem.

[naset]

Hey bro, I had that problem. I found it to be caused by apps installed like PhoneAlarm, VITO SMSChat. Caused a few times when I unceremoniously soft reset the device, typically when something hangs and it gets on my nerves.
So, my advice is, remove PhoneAlarm from TODAY screen. Then run this utility, downloadable as fixunreadcount.exe

More info available at:
FixUnreadCount v1.0 (http://freewareppc.com/communication/fixunreadcount.shtml)
http://freewareppc.com/communication/fixunreadcount.shtml

Remember to disable apps that manages your sms/e-mails status such as PhoneAlarm or VITO SMS Chat first before running the utility. Not that it harms your device in any way, just that it could be frustrating - waiting for boot-up just to see if it works just to find that it doesn't. So, do it right at first attempt. :D

Well, after you run it, soft reset. Fixes it.
good day mate.thx for your info.thx you so much.

[naset]

still not working..i always got the messaging prob when i softreset the phone eventho i wait for a couple minutes.all my latest messages was gone,and only remain the old one unread.i have no prob with nhocbanme's rom regarding this messaging prob.
maybe nhocbanme can help?

[helloworld1]

still not working..i always got the messaging prob when i softreset the phone eventho i wait for a couple minutes.all my latest messages was gone,and only remain the old one unread.i have no prob with nhocbanme's rom regarding this messaging prob.
maybe nhocbanme can help?

I have made a test. As soon as I receive a new message, I reset the device, the message is still there. As soon as I deleted several message, I reset the device, and the deleted messages are all gone. So I think it is the software problem. Does this occur after hard reset?

[naset]

i'm not hard reset my phone.i also didnt install any software yet.maybe it is my phone's prob?

[helloworld1]

i'm not hard reset my phone.i also didnt install any software yet.maybe it is my phone's prob?

Have you ever restored your sms and contacts from Activesync ,PIM Backukp or other backup softwares?

[naset]

no,i didnt do all of that things.it's ok helloworld1.i really love your rom.:) hopes in the next update,u will provide ipaq's today panel too. :)

[voquie]

Hai helloword1...
Now i'm using b152,I want to ask u. the infrared in this rom can not be used. like the rom before b142. are u not repaired? or this bugs for the rom series?

[tyan888]

still not working..i always got the messaging prob when i softreset the phone eventho i wait for a couple minutes.all my latest messages was gone,and only remain the old one unread.i have no prob with nhocbanme's rom regarding this messaging prob.
maybe nhocbanme can help?
In that case, I advise that you run SKTools (http://s-k-tools.com/index.html?m_downloads.html#sktools), delete messaging files, if there are any SMSes that you really wish to keep, perhaps you'd be interested in using Jeyo Mobile Companion (http://www.jeyo.com/companion.asp) currently version 2.1 - for backup purposes.
Once you've run the SKTools' delete messaging functions, run the fixunreadcount.exe and soft reset using SKTools "soft reset" option from it's menu.

[tyan888]

Emm, this is an interesting app, thanks. The count of sms can get wrong sometimes?! I will reserve it for my first time to encounter this problem.
Yes, somehow, occasionally the system's cycles didn't get the chance to update the count in registry, or so it appears to be.
Once that gets 'miscounted', even changing the count to any other values, it will retain the "1 unread" status.

I have not delved deeper, tho I am not enthusiastic about it anyhow, it's just ad hoc understanding of how exactly that function is executed.

I have experienced it since WM5. In the past, it happened
typically when I soft reset while the device processor is busy, edging on a 'hang' condition.

[helloworld1]

no,i didnt do all of that things.it's ok helloworld1.i really love your rom.:) hopes in the next update,u will provide ipaq's today panel too. :)

You can install it by yourself. There is a thread in this post discussing how to.

[helloworld1]

Hai helloword1...
Now i'm using b152,I want to ask u. the infrared in this rom can not be used. like the rom before b142. are u not repaired? or this bugs for the rom series?

This is a bug since b135. The b110 does not have this bug. Even if I haven't fixed it this time, I am still planing to fix it in the future.

[naset]

In that case, I advise that you run SKTools (http://s-k-tools.com/index.html?m_downloads.html#sktools), delete messaging files, if there are any SMSes that you really wish to keep, perhaps you'd be interested in using Jeyo Mobile Companion (http://www.jeyo.com/companion.asp) currently version 2.1 - for backup purposes.
Once you've run the SKTools' delete messaging functions, run the fixunreadcount.exe and soft reset using SKTools "soft reset" option from it's menu.
thank you.i will try that.:)

[prash0715]

thank you.i will try that.:)
hahah atalast u foud a sol;ution mmm all d best,,???!!

[naset]

You can install it by yourself. There is a thread in this post discussing how to.
thanks for the info.i will search it.:)
btw,this forum community very nice and help me alot.:)

[naset]

hahah atalast u foud a sol;ution mmm all d best,,???!!
hehehe.thanks to all members here for helping a newbie like me.:)

[prash0715]

thanks for the info.i will search it.:)
btw,this forum community very nice and help me alot.:)
mm of courser xda-developers is d best site der's no other forum having such a good solutions ROMS all stuffs....... xda rocks wateva.....

[prash0715]

hehehe.thanks to all members here for helping a newbie like me.:)
hehehhe yo wey come from all members hehehaa

[helloworld1]

My rom is ported from HTC kaiser -- a device without IR! So that's the core problem! I may need to compare what have been disabled.

I will try this:
[HKEY_LOCAL_MACHINE\Comm\IrDA\Linkage]
"Bind"=multi_sz:"Irsir1"
[HKEY_LOCAL_MACHINE\Comm\Irsir]
"DisplayName"="Serial (COM) IrDA Driver"
"Group"="NDIS"
"ImagePath"="irsir.dll"
[HKEY_LOCAL_MACHINE\Comm\Irsir\Linkage]
"Route"=multi_sz:"Irsir1"
[HKEY_LOCAL_MACHINE\Comm\Irsir1\Parms]
"BusNumber"=dword:0
"BusType"=dword:0
"Port"=dword:1
"IntIR"=dword:0
"TransceiverType"=dword:1
"DisablePowerManagement"=dword:1
"CheckForHangTimeInSeconds"=dword:e10
[HKEY_LOCAL_MACHINE\Comm\IrDA]
"Hints"=dword:8224
[HKEY_LOCAL_MACHINE\Software\Microsoft\Obex]
"protocols"="bth,irda"
[HKEY_LOCAL_MACHINE\Software\Microsoft\Obex\Transpo rts\{30a7bc02-59b6-40bb-aa2b-89eb49ef274e}]
"Name"="IRDA"
[HKEY_CLASSES_ROOT\CLSID\{30a7bc02-59b6-40bb-aa2b-89eb49ef274e}]
@="IrDATransport"
[HKEY_CLASSES_ROOT\CLSID\{30a7bc02-59b6-40bb-aa2b-89eb49ef274e}\InprocServer32]
@="OBEXAPI.dll"
"ThreadingModel"="Free"
"ProgID"="IrDATransport.1"
"VersionIndependentProgID"="IrDATransport"
and THIS:
[HKEY_LOCAL_MACHINE\Comm\Irsir]
"DisplayName"="Serial (COM) IrDA Driver"

I WILL FIX THE IR PROBLEM IN DAYS, IF IR PROBLEM REALLY BOTHER YOU, PLEASE WAIT FOR ME TO RELEASE THE FIX.

[prash0715]

My rom is ported from HTC kaiser -- a device without IR! So that's the core problem! I may need to compare what have been disabled.

dude how do u extract d ROM from other device and make it compatible fer iPAQ????am a bit confuse solve my problem???:confused:

[helloworld1]

dude how do u extract d ROM from other device and make it compatible fer iPAQ????am a bit confuse solve my problem???:confused:

In a simple word, the procedure is as below:
The rom image is just like a zipped file with some special sections. So it is not hard to extract all files and modules in a ROM. If you want to extract too, please PM me and I will provide you tools.
First I extract the Kaiser's ROM as well as HP's WM5 ROM.
Delete all Kaiser's Drivers and copy all HP's drivers.
Delete all Kaiser's specific softwares leaving only MS's.
Tweak registrys and make all driver working.
Include some HP's softwares and their registries.
Modify kernel(XIP) so that it fits on the boot address 0x00180000 to 0x540000. And modify the boot related offsets.
Do some minor modifications like boot screen.
OK! Is it simple to say but require a huge amount of time to do especially when there are not proper tools before year 2008.

[helloworld1]

Hai helloword1...
Now i'm using b152,I want to ask u. the infrared in this rom can not be used. like the rom before b142. are u not repaired? or this bugs for the rom series?

I managed to fix the bug this time. But it requires more time for me to test. So be patient, I may release it maybe tomorrow.

EDIT:
it is working very well now. But I think it will consume more power!

[prash0715]

In a simple word, the procedure is as below:
The rom image is just like a zipped file with some special sections. So it is not hard to extract all files and modules in a ROM. If you want to extract too, please PM me and I will provide you tools.
First I extract the Kaiser's ROM as well as HP's WM5 ROM.
Delete all Kaiser's Drivers and copy all HP's drivers.
Delete all Kaiser's specific softwares leaving only MS's.
Tweak registrys and make all driver working.
Include some HP's softwares and their registries.
Modify kernel(XIP) so that it fits on the boot address 0x00180000 to 0x540000. And modify the boot related offsets.
Do some minor modifications like boot screen.
OK! Is it simple to say but require a huge amount of time to do especially when there are not proper tools before year 2008.

k dude give me d tools aii too try my best to help u out with new ROM's
aii noe to extract ROM but nt soo good in modifying things...so hep me out aii too help u out...:)

[helloworld1]

hehehhe yo wey come from all members hehehaa

If you are still confused about how to install HP's today panel. I have helped you searched this thread around:

First download these files:
http://forum.xda-developers.com/showpost.php?p=2222668&postcount=617
And follow this tutorial:
1. Download and copy all the files to {Device}\Windows\
2. Goto 'HKLM\Software\Microsoft\Today\Items\' and create a new key as follows: "Today Panel" (Include the quote as well)
3. Create a new REG_SZ value with the Value Name: "dll" and Value Data: "todaypanel.dll" (Do not include quote)
4. Create a new REG_DWORD value with the Value Name: "Enabled" and Value Data: "1" (Do not include quote) (Base should be "Decimal")
5. Create a new REG_DWORD value with the Value Name: "Flags" and Value Data: "1" (Do not include quote)
6. Create a new REG_DWORD value with the Value Name: "Options" and Value Data: "0" (Do not include quote)
7. Create a new REG_DWORD value with the Value Name: "Order" and Value Data: "3" (Do not include quote) (This is to prioritize which items come first. Please make sure that this does not have the same number as the other items)
(You can find out the other items' order by selecting the other items key)
8. Create a new REG_DWORD value with the Value Name: "Selectability" and Value Data: "2" (Do not include quote)
9. Create a new REG_DWORD value with the Value Name: "Type" and Value Data: "4" (Do not include quote)
10. This should triggered the dll to be installed into the Windows Mobile system.
NB: If it doesn't trigger to install the dll, go to the today under 'Settings\Personal\Today' and go to 'items'. You should now see the "Today Panel" item. (If you still cannot see the "Today Panel" item, please restart device)

Note this detailed tutorial is not credited by me. It is written by "martinrmn".

[voquie]

I managed to fix the bug this time. But it requires more time for me to test. So be patient, I may release it maybe tomorrow.

EDIT:
it is working very well now. But I think it will consume more power!

ok thx for your attention,I will test it. and I will report to you I got another problem's..thx..
Edit:
helloword1 u mean u test you'r new release or b153? because the b153 can not use. sory if there missunderstanding.

[prash0715]

In a simple word, the procedure is as below:
The rom image is just like a zipped file with some special sections. So it is not hard to extract all files and modules in a ROM. If you want to extract too, please PM me and I will provide you tools.
First I extract the Kaiser's ROM as well as HP's WM5 ROM.
Delete all Kaiser's Drivers and copy all HP's drivers.
Delete all Kaiser's specific softwares leaving only MS's.
Tweak registrys and make all driver working.
Include some HP's softwares and their registries.
Modify kernel(XIP) so that it fits on the boot address 0x00180000 to 0x540000. And modify the boot related offsets.
Do some minor modifications like boot screen.
OK! Is it simple to say but require a huge amount of time to do especially when there are not proper tools before year 2008.

k dude give me d tools aii too try my best to help u out with new ROM's
aii noe to extract ROM but nt soo good in modifying things...so hep me out aii too help u out..:o:)

[naset]

wow..i hope when u released the rom,it will be bug free rom for our hp ipaq. :)

[prash0715]

wow..i hope when u released the rom,it will be bug free rom for our hp ipaq. :)
fer shure mister Naset hes is gonna aget a good 1 ....bug fre.....

[BesFen]

Hi Helloworld1,
Did you use a same ROM with b142 (CE OS 5.2.19949 (Build 19214.1.0.4)) or a different ROM in b153? :)

Thanks.

[arnaudbh]

Hello everybody ;

Somebody know if there is any French version of a WM6 Rom for this rw6815 ?

Thanks ;)

[helloworld1]

Hi Helloworld1,
Did you use a same ROM with b142 (CE OS 5.2.19949 (Build 19214.1.0.4)) or a different ROM in b153? :)

Thanks.

The same build. There is no better releases than this for now. I will release a quick-fix release that address IR and obex today.

[helloworld1]

ok thx for your attention,I will test it. and I will report to you I got another problem's..thx..
Edit:
helloword1 u mean u test you'r new release or b153? because the b153 can not use. sory if there missunderstanding.

I am testing a new one b155 that address only ir and obex problems.

[helloworld1]

k dude give me d tools aii too try my best to help u out with new ROM's
aii noe to extract ROM but nt soo good in modifying things...so hep me out aii too help u out..:o:)

What do you mean? Sorry I can not quite get the idea.

[naset]

What do you mean? Sorry I can not quite get the idea.
he want u to give him the tools to extract the ROM so he can help u as far as he can.thats what i can understand.

[prash0715]

What do you mean? Sorry I can not quite get the idea.
dude aii have ATOM LIFE KITCHEN,Scoter_Kitchen_1.0,HyperCore_V1.01,
but dees kitchend fer cooking other ROM as i think so wat r u using fer building HP iPAQ ROMS??:D

[helloworld1]

dude aii have ATOM LIFE KITCHEN,Scoter_Kitchen_1.0,HyperCore_V1.01,
but dees kitchend fer cooking other ROM as i think so wat r u using fer building HP iPAQ ROMS??:D

Atom Kitchen can be used to extract this ROM. Rename my ROM to diskimage_VER.nb0 and follow the atom kitchen's instruction.
http://rapidshare.com/files/99367619/Garmin_XDA_ATOM_Cooking_Sets__14032008_.rar.html

I also have some raw tools I used and I have PMed you.

[naset]

can i know when the new update rom will be relased?:)

[hochengsoon]

still not working..i always got the messaging prob when i softreset the phone eventho i wait for a couple minutes.all my latest messages was gone,and only remain the old one unread.i have no prob with nhocbanme's rom regarding this messaging prob.
maybe nhocbanme can help?

try not to perform soft reset so soon. not a genius way but will help.

[helloworld1]

can i know when the new update rom will be relased?:)

Maybe around 10:00 - 13:00 GMT, today.

EDIT:
Celebration: My 500 POST!

[hochengsoon]

Maybe around 10:00 - 13:00 GMT, today.

Whao, 500 post! Can Spb Backup backup all my threaded SMSes & Call History. Have been resintalling all Apps after flashing & restore from Outlook but these thingie are not part of it.

[naset]

congratz on your 500 post! :)
also thanks for the new rom. :)

[naset]

@helloworld1
can u give me info what and where is the files that i must delete when i want to remove ipaq audio if extract the rom?

[helloworld1]

@helloworld1
can u give me info what and where is the files that i must delete when i want to remove ipaq audio if extract the rom?

audio.cpl
ipaqutil.dll

[naset]

thx helloworld1.:) can i know what audio.mui is for?

[helloworld1]

thx helloworld1.:) can i know what audio.mui is for?

It can also be deleted. It is the language file of audio.cpl

[naset]

thx you so much.now,it is the 1st time im cooking the rom.it is fun. :)

[hochengsoon]

Whao, 500 post! Can Spb Backup backup all my threaded SMSes & Call History. Have been resintalling all Apps after flashing & restore from Outlook but these thingie are not part of it.

r e s e n d

[calvinljh]

Hi All, Just curious was ActiveSync work? sorry i mean on calender sync after upgrade to any version built.

I had problems to sync my calender and even happend as copy some file from pocket PC to my PC as backup too.

Can any perfessional advise.

[hochengsoon]

Hi All, Just curious was ActiveSync work? sorry i mean on calender sync after upgrade to any version built.

I had problems to sync my calender and even happend as copy some file from pocket PC to my PC as backup too.

Can any perfessional advise.

Do you mean using ActiveSync with Outlook Calendar? Working perfectly for me. Setup just like original WM5. What seems to be your problem? Screenshots?

[helloworld1]

Hi All, Just curious was ActiveSync work? sorry i mean on calender sync after upgrade to any version built.

I had problems to sync my calender and even happend as copy some file from pocket PC to my PC as backup too.

Can any perfessional advise.

Activesync should be at version 4.5

[prash0715]

Activesync should be at version 4.5
yap u aa rite dude.....n dude aii finished building ROM but aii hav sm doubts can u come on Gtalk...so we can discuss

[seanneko]

Hi

Any chance of an updated Atom ROM? :)

[helloworld1]

Hi

Any chance of an updated Atom ROM? :)

No, I am not planing updating it recently and I don't have the device. It is pain to make blind update.

[kusanagi]

Hi Helloworld,

Since you have re-included Dotnet CF 3.5, is it alright to not to use the "ROM upgrade" mode in SPB Backup? will it break the newly added features? I'm using b142 at the moment.

Anymore planned upgrade after b155? or any upgrade you can see coming? otherwise I'll wait.

Thanks,

K

[wallaceff]

Helloworld:
Firstly, fantastic ROM. Well done!
Just a quick question - do you still need to apply the PowerManagementPatch.CAB? Can you give some insight as to what this actually does? Does it completely uninstall if things don't go well?

Also, I understand that this ROM is based on that Atom, is there any advantage to basic the rom on the Atom Exec (which, I understand, is clocked at 624? (or something close to that))?

Also, is it just me, or does Igo 2008 run really really really slow?

[helloworld1]

Helloworld:
Firstly, fantastic ROM. Well done!
Just a quick question - do you still need to apply the PowerManagementPatch.CAB? Can you give some insight as to what this actually does? Does it completely uninstall if things don't go well?

Also, I understand that this ROM is based on that Atom, is there any advantage to basic the rom on the Atom Exec (which, I understand, is clocked at 624? (or something close to that))?

Also, is it just me, or does Igo 2008 run really really really slow?

The power management patch is required to prolong the battery life. It is mostly registry tweaks that enables the power saving options of devices.
This ROM is not based on atom, it is based on Kaiser and the Emulator.
The drivers are mixed with 6828 and atom's and most OEM app are from Atom Life.
You can overclock by using apps.

[seanneko]

No, I am not planing updating it recently and I don't have the device. It is pain to make blind update.

Oh, ok. Well, if you change your mind then I'm happy to help test it :)

I just installed your Atom release 1 and so far it's very nice. The only problems are that the auto config tool that runs on first boot crashed, and I can't get Activesync to work over BT. Otherwise I really like it :)

[helloworld1]

Oh, ok. Well, if you change your mind then I'm happy to help test it :)

I just installed your Atom release 1 and so far it's very nice. The only problems are that the auto config tool that runs on first boot crashed, and I can't get Activesync to work over BT. Otherwise I really like it :)

I may replace the buggy atom's auto config with the HP's auto config tools. It should work better.

[helloworld1]

Thanks whtwww very much. Without his help, I may never fix the bug so fast or forever all by myself!

The procedure is very simple:
Copy the directory /windows/CertDtls to /windows/system
And the importing will work fine!
I will make a update for the new comer, too.

[voquie]

hai helloworld1..
what u mean "to fix the registery Is enabled 1>0" for what? if I change the value so the infrared doesn't work or what?
sorry if this is stupid question.thx for the help

[helloworld1]

hai helloworld1..
what u mean "to fix the registery Is enabled 1>0" for what? if I change the value so the infrared doesn't work or what?
sorry if this is stupid question.thx for the help

All receiving files are disabled, bt, ir. It is a known method to prolong battery life.

[thab63]

Hi Helloworld1,

Since the Voice Commander is remove in the latest ROM,
I found that under settings in BUTTON, the prompt in still there,
how do I remove the " Voice Commander" word.

Can that be remove in the registry.

Thanks

[helloworld1]

Hi Helloworld1,

Since the Voice Commander is remove in the latest ROM,
I found that under settings in BUTTON, the prompt in still there,
how do I remove the " Voice Commander" word.

Can that be remove in the registry.

Thanks

I have noticed that. But that button can be assigned to other programs. It does not hurt to call this button "Voice Commander" button.

[Jabba1701]

silly question, but which one should i use for my O2 atom life?

[kusanagi]

Thanks whtwww very much. Without his help, I may never fix the bug so fast or forever all by myself!

The procedure is very simple:
Copy the directory /windows/CertDtls to /windows/system
And the importing will work fine!
I will make a update for the new comer, too.

Good stuff!!! it worked finally!!! great thanks!!

Ket

[helloworld1]

silly question, but which one should i use for my O2 atom life?

There are many ROM for O2 XDA Atom Life both clean and dirty.

[Jabba1701]

There are many ROM for O2 XDA Atom Life both clean and dirty.

sorry, i meant which of your ones.

[naset]

off topic a little...how to add new camera templates?i try copy to device/My Doc/Templates still camera didnt detect the new templates.also i try soft reset still not working.anybody here knows where the template folder is?

[voquie]

All receiving files are disabled, bt, ir. It is a known method to prolong battery life.

oh ok..if i i want to receive data with bt or ir, how to do it? i must change the registery again or not?

[helloworld1]

sorry, i meant which of your ones.

I haven't made any Atom life ROM, sorry.

[helloworld1]

oh ok..if i i want to receive data with bt or ir, how to do it? i must change the registery again or not?

Yes, change the registry back.

[coffeecancer]

my sync does'nt work on b153. plzz help~

[Jabba1701]

I haven't made any Atom life ROM, sorry.

lol that'd explain why it didn't work! :o

[BesFen]

I tried b155, althought i already change the dword to 1, i still can't receive file by BT, and the battery live more short. Since i never use IR, i chang emy ROM to b142 again, it perfect ROM for me. it will be very amazing if you can make longer batterai life.:D

[helloworld1]

I tried b155, althought i already change the dword to 1, i still can't receive file by BT, and the battery live more short. Since i never use IR, i chang emy ROM to b142 again, it perfect ROM for me. it will be very amazing if you can make longer batterai life.:D

I see. I have never used IR too. But for the perfection of the ROM. Adding IR is necessary. If you found the BT OBEX is not working, you may need to re-pair the device with computer.

[helloworld1]

Updating so frequently will really bother some Updating freaks. But frankly speaking, I think it is good for new comers as they will always get the updated version at first time.

Previously I planed to write a script program that based on Linux's "Diff" and "Patch" to release updates so that the downloading size will be shareply reduced, But I think most people can not use command line program well and most people have very fast internet connection so I drop this plan. Also, downloading time for a ROM update is relatively short comparing to the post-update actions.

Still I hope the old users reading the changes of updates carefully in order not to download&flash unnecessary updates.

[prash0715]

mm yop dude...........but its good fer new members....with latest updates ,,mmmmm stillll ha its good,,...?~!!

[BesFen]

I see. I have never used IR too. But for the perfection of the ROM. Adding IR is necessary. If you found the BT OBEX is not working, you may need to re-pair the device with computer.

My BT is working well:), now i am on b 142:D:D

Thank You Helloworld1.

[helloworld1]

My BT is working well:), now i am on b 142:D:D

Thank You Helloworld1.
In my test, BT OBEX is working well in b155, b156. I have also encountered your problem before. But re-pairing will fix it.

[helloworld1]

mm yop dude...........but its good fer new members....with latest updates ,,mmmmm stillll ha its good,,...?~!!

These updates are small fixes for the bugs. They are unlikely to introduce new bugs. I will test the minor bug fixes for at least 2 days and major updates at least 14 days.

[prash0715]

These updates are small fixes for the bugs. They are unlikely to introduce new bugs. I will test the minor bug fixes for at least 2 days and major updates at least 14 days.
m dude building ROM testin it with our fine is very painfull mm flashflashflash!!! hahah but still we succeed mmmm but am plannin to get a used device....fer testing

[naset]

@helloworld1
it is good to see u update frequently. :) i hope,the prob of copying sms to sim will be resolved in the next major update. :)

can i know why there is no "setup wizard" in this rom?in nhocbanme's rom,it have.

[BesFen]

In my test, BT OBEX is working well in b155, b156. I have also encountered your problem before. But re-pairing will fix it.

in b155, Others device can found my BT device, but can't received file transfered by BT althought I already check the option "receive all incoming beams". And same when I will send the file, mine can found others device but can't sent too.:confused:

[BesFen]

my sync does'nt work on b153. plzz help~

You have to use Active Sync 4.5.

[Pedro_PVO]

Hello.
I found two bugs in the last (and previous) ROM(b155 and b156): The "backlight" icon is not working.
When you click the "power" icon and then to the USB label, the machine reset itself.
Thank you for a great job, keep doing it.
Very best regards.

[hochengsoon]

Hello.
I found two bugs in the last (and previous) ROM(b155 and b156): The "backlight" icon is not working.
When you click the "power" icon and then to the USB label, the machine reset itself.
Thank you for a great job, keep doing it.
Very best regards.

No issue on my b155.

[hochengsoon]

After flashing from b142 to b155 followed by Spb Backup Full Restore encountered the following error after soft reset.

VCDaemon.exe
The file 'VCDaemon' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file.

Tried copying Windows/CertDtls to Windows/System.

[helloworld1]

Hello.
I found two bugs in the last (and previous) ROM(b155 and b156): The "backlight" icon is not working.
When you click the "power" icon and then to the USB label, the machine reset itself.
Thank you for a great job, keep doing it.
Very best regards.

This does not happen on my device.

[kusanagi]

Oh man... just as I finished reinstalling my apps to b155, b156 is already here... but the sound in b156 I can happily live without.

Helloworld, well done!!

b155/b156 by far the best ROMs!!

I'm hoping the "import from camera" is on the to fix list.

BTW, is there a way to stop the phone from importing all my Sim contacts automatically after I hard reset? and is there a way to make my contact to not to show sim contacts?

Thanks,

K

[helloworld1]

After flashing from b142 to b155 followed by Spb Backup Full Restore encountered the following error after soft reset.

VCDaemon.exe
The file 'VCDaemon' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file.

Tried copying Windows/CertDtls to Windows/System.

delete windows/startup/vcdaemon.lnk
the .net app may not work proper after restore.

[kamol]

:) ว่างๆ จะลงดู

[hochengsoon]

delete windows/startup/vcdaemon.lnk
the .net app may not work proper after restore.

Thanks, the error is no more there but are there any implication and what is vcdaemon for?

[helloworld1]

Oh man... just as I finished reinstalling my apps to b155, b156 is already here... but the sound in b156 I can happily live without.

Helloworld, well done!!

b155/b156 by far the best ROMs!!

I'm hoping the "import from camera" is on the to fix list.

BTW, is there a way to stop the phone from importing all my Sim contacts automatically after I hard reset? and is there a way to make my contact to not to show sim contacts?

Thanks,

K

Maybe you can disable the sim contacts by this:
[HKEY_CURRENT_USER\ControlPanel\Phone]
"ShowSim"=dword:00000000
I will investigate why phone will auto import sim contacts. Also I think it is possible to fix the camera loader problem.

[helloworld1]

Thanks, the error is no more there but are there any implication and what is vcdaemon for?

I delete the Voice Commander in >b155, but the program restores this shortcut.

[helloworld1]

:) ว่างๆ จะลงดู

OOooOO, I don't know Thai. :confused:

[calvinljh]

Hi Hi, attached with print screen issue.

I'm using Activesync version 4.5... this is happend to me after upgrade to WM6.

When I downgrade back to WM5 it work perfectly.


Do you mean using ActiveSync with Outlook Calendar? Working perfectly for me. Setup just like original WM5. What seems to be your problem? Screenshots?

[naset]

@helloworld1
is it possible to change the sound driver using atom exec sound driver?i can see in russian web site,they change rw6815 sound driver.

i think the hissing problem maybe related to sound driver.IMHO.

[prash0715]

@helloworld1
is it possible to change the sound driver using atom exec sound driver?i can see in russian web site,they change rw6815 sound driver.

i think the hissing problem maybe related to sound driver.IMHO.


datz nt bcuz of ur driver it coz of ur Speaker problem......don blame drivers....der r made perfect,,,!@!

[naset]

speaker problem?but i try many headphones and still can hear the hissing sound. :(

[prash0715]

mm dude wait am releasing ROM in next few days try it if u still get dat problem aii gve u n other solution..>!!!

[naset]

mm dude wait am releasing ROM in next few days try it if u still get dat problem aii gve u n other solution..>!!!
wow..u also wanna release a rom?great job.:)

[helloworld1]

@helloworld1
is it possible to change the sound driver using atom exec sound driver?i can see in russian web site,they change rw6815 sound driver.

i think the hissing problem maybe related to sound driver.IMHO.

You can change the driver yourself. If you install SRS WOW, you change the driver to Atom Life's.

[naset]

thanks for the info helloworld1.so,i think maybe it is my phone problem because eventho i install srs wow,i still can hear the hiss.

thanks again.keep it up on modding the rom :)

[prash0715]

wow..u also wanna release a rom?great job.:)

yap am working on it......its Kumara series ROM.....alllstable ROMS as HElloworlds.......mmmm still helloworlds great ROM

[prash0715]

You can change the driver yourself. If you install SRS WOW, you change the driver to Atom Life's.


hey @helloworld dude wat r d files fer dialer files??
nd how did u give me all d drivers of HP iPQ like hw do u noe dos r d driver files...did u get it in some website.???

[hochengsoon]

Hi Hi, attached with print screen issue.

I'm using Activesync version 4.5... this is happend to me after upgrade to WM6.

When I downgrade back to WM5 it work perfectly.

Don't remember seeing 2nd screenshot (1st one yes). Try removing the device from activesync & allow it to detect again.

[pooh_rocky]

how to upgrade urs rom 16 to 18 wothout flashing device?? reply is must...v all watin helloworld..........

[pooh_rocky]

How to upgrade urs ROM from 16 to 18 without flashing device? reply is must....v all wating helloworld....

[helloworld1]

hey @helloworld dude wat r d files fer dialer files??
nd how did u give me all d drivers of HP iPQ like hw do u noe dos r d driver files...did u get it in some website.???

Ok, I extracts them all and upload it.
http://www.mediafire.com/?nhan4ol0blt

Dialer files are just a series of pictures. You only need to replace the corresponding files.

[helloworld1]

How to upgrade urs ROM from 16 to 18 without flashing device? reply is must....v all wating helloworld....

Don't send duplicate posts and ask me that MUST REPLY!!
I have changed many registry values and modules. So in theory it is hard to update to b156 without flashing.
But if you are only interested in certification issues, you can refer to my previous thread.
Also sound here:
[HKEY_LOCAL_MACHINE\Snd\Event]
"Curr0"=multi_sz:"alarm2","","alarm2","default","Empty","alarm2","infbeg","infend","infend","MenuPop","hwandsw","","alarm2","infbeg","infend","infend","alarm2","","","voicbeep","RecEnd"

IR issue need a module which can not be installed normally.

[prash0715]

Ok, I extracts them all and upload it.
http://www.mediafire.com/?nhan4ol0blt

Dialer files are just a series of pictures. You only need to replace the corresponding files.
thx dude..!!

[archat68]

Hi,
I've a 6828 with 1MB card. I'm going to upgrade it to WM6. As you see I'm a complete newbie. So pls suggest me:
i) Which ROM version to try at first?
ii) What is the most failsafe of flashing - SD card or PC?
iii) also should I downgrade the bootloader to 1.0.1 before proceeding?

Plsssssssss suggest me.

And lastly but not least : THANKS HELLOWORLD

[prash0715]

Hi,
I've a 6828 with 1MB card. I'm going to upgrade it to WM6. As you see I'm a complete newbie. So pls suggest me:
i) Which ROM version to try at first?
ii) What is the most failsafe of flashing - SD card or PC?
iii) also should I downgrade the bootloader to 1.0.1 before proceeding?

Plsssssssss suggest me.

And lastly but not least : THANKS HELLOWORLD


r u crazy ur MMC is 1MB or 1 GB

try dis ROM
20080309b39:http://www.mediafire.com/?ic2lz4nkvgo

[archat68]

Sorry 1GB:)
And reply to other queries pls.

[prash0715]

Sorry 1GB:)
And reply to other queries pls.
mm u better flash thru SD it d card is of good quality like Scandisk format d card to FAT and place diskimg.nb0 in it .........hen go to boot loader mode by pressing "-","-",soft reset den leave it fer sm few minutes after a few 20 to 25 mins d device ll restart:):)yoyo u into new OS

[trueloki]

Hi HelloWord, thank you for your work.

I flashed my rw6815 using the 20080806b155 version of your ROM. It is working fine since 2 days but I have the following two findings:
- camera not working, and yes I tried the patch from PDA-HACK.NET but it is not working. Now I have two programs to run a camera and with the one designed for rw6815 I even got a camera screen but I also got an error "No supported camera has been detected"
- battery life is quite shorter

But still this is a very good ROM, so once again thank you.

[prash0715]

Hi HelloWord, thank you for your work.

I flashed my rw6815 using the 20080806b155 version of your ROM. It is working fine since 2 days but I have the following two findings:
- camera not working, and yes I tried the patch from PDA-HACK.NET but it is not working. Now I have two programs to run a camera and with the one designed for rw6815 I even got a camera screen but I also got an error "No supported camera has been detected"
- battery life is quite shorter

But still this is a very good ROM, so once again thank you.

mm yap dats EXT ROM problem if u want aii give u a Zip file past d contents of d file in root flder in ur Device.....PM me if u want???

[prash0715]

here u go dude
http://www.mediafire.com/?m0jyvsajnur

extract dis rar file to ur ROOT folder...
n then hard reset ur device by pressing "on" button and "soft reset" button......at a time ur device will clean reboot...den ur camera ll work

[voquie]

in b155, Others device can found my BT device, but can't received file transfered by BT althought I already check the option "receive all incoming beams". And same when I will send the file, mine can found others device but can't sent too.:confused:

hai helloworld can u follow the besfen said, so if i on or off the bt or ir just use to check the "receive all incoming beams".like the WM5. so we not difficult to change it (not by changing the registry) can u make it?

[trueloki]

here u go dude
http://www.mediafire.com/?m0jyvsajnur

extract dis rar file to ur ROOT folder...
n then hard reset ur device by pressing "on" button and "soft reset" button......at a time ur device will clean reboot...den ur camera ll work

Thanks prash0715,

I did as you wrote. I extracted the files to the ROOT folder, _QHIDDENPARTITION folder was already there so I just add your files, then I hard reset my iPAQ. Oryginal camera software from the ROM was not working so then I uploaded a patch from PDA-HACK.NET. Now when I run a camera I don't have an error as before, but still I just got an initial screen of HP camera soft, and when I go into options info tab I see a message "No camera detected". Please let me know if you have an idea how to fix it.

[helloworld1]

hai helloworld can u follow the besfen said, so if i on or off the bt or ir just use to check the "receive all incoming beams".like the WM5. so we not difficult to change it (not by changing the registry) can u make it?

Seems, this switch is not very useful. I have found that all wm6 and 6.1 ROM I tested on the web can not make this switch very useful. I may investigate this further.

[hochengsoon]

Hi,
I've a 6828 with 1MB card. I'm going to upgrade it to WM6. As you see I'm a complete newbie. So pls suggest me:
i) Which ROM version to try at first?
ii) What is the most failsafe of flashing - SD card or PC?
iii) also should I downgrade the bootloader to 1.0.1 before proceeding?

Plsssssssss suggest me.

And lastly but not least : THANKS HELLOWORLD

i) b156
ii) You can try SD card if you have bootloader 1.0.5.
iii) If unsucessful then downgrade to bootloader 1.0.1 and try my PC steps from 1st thread.

For me I need to use PC mode. Good Luck.

[prash0715]

Thanks prash0715,

I did as you wrote. I extracted the files to the ROOT folder, _QHIDDENPARTITION folder was already there so I just add your files, then I hard reset my iPAQ. Oryginal camera software from the ROM was not working so then I uploaded a patch from PDA-HACK.NET. Now when I run a camera I don't have an error as before, but still I just got an initial screen of HP camera soft, and when I go into options info tab I see a message "No camera detected". Please let me know if you have an idea how to fix it.

u need to hard reset ur device now...by pressing ON button + softreset Button den press ''_''"_"
it shows u device clean boot

[trueloki]

u need to hard reset ur device now...by pressing ON button + softreset Button den press ''_''"_"
it shows u device clean boot

Hi prash0715,

I did a hard reset when I uploaded new files. So "No camera detected" is the message I got after a hard reset. I am not quite sure how another hard reset would help, could you please let me know?

[prash0715]

Hi prash0715,

I did a hard reset when I uploaded new files. So "No camera detected" is the message I got after a hard reset. I am not quite sure how another hard reset would help, could you please let me know?

mm while u pasted extrom file in d root drive did all d files get copied.????????
mm :)

[grel]

Loaded in ROM via Transcend 512 MB SD card. Worked well first time (once I got the Bootloader up).

1) To get phone to sync emails over GPRS had to delete modem and re-enter details then phone synced okay.

2) Camera locked first time used. Soft reset then worked no problem.

3) "PDA Status" backlight adjustment did not work. Used "Metrix" instead. Also used PDC download for bigger clock like HTC today screen which works well.

4) USB charging a bit funny on one PC which doesnt have active sync installed - had to change USB charge speed to get the phone to charge, same result with two cables (possible problem?) Works fine on two other PCs with active sync installed.

5) Battery life: 8 hours overnight started fully charged in the morning down to 80% . Battery is OEM, 4 months old ,and looks like it will give 2 days life (with Power management patch applied).

6) A question: Google maps reports "My Location" not supported. I thought it used the base station on the mobile network to locate you if no GPS on the phone. Maybe I am wrong.

7) Minor Bug ( Perhaps ), Have an incoming phone call, answer the call then press green phone icon/button to go to speaker phone. Incoming call then hangs up. Then I cant get rid of the speaker phone on the 6828. Keeps notifying that speaker phone is on.

8) If there is a way to stop SIM contacts displaying this would be nice.

I havent test IR, WIFI or Bluetooth. Hope this is useful. Keep up the good work!

[trueloki]

mm while u pasted extrom file in d root drive did all d files get copied.????????
mm :)

Hi prash0715,

If you mean the files should be in _QHIDDENPARTITION after hard reset then no, they are not there. But on the other hand I have a different system response: "No camera detected" message instead of "No supported camera has been detected" error before hard reset with your files. So something happened ;)

[helloworld1]

Answers

1) To get phone to sync emails over GPRS had to delete modem and re-enter details then phone synced okay.
A: good

2) Camera locked first time used. Soft reset then worked no problem.
A: It is normal

3) "PDA Status" backlight adjustment did not work. Used "Metrix" instead. Also used PDC download for bigger clock like HTC today screen which works well.
A:emmmm

4) USB charging a bit funny on one PC which doesnt have active sync installed - had to change USB charge speed to get the phone to charge, same result with two cables (possible problem?) Works fine on two other PCs with active sync installed.
A: Yes, that's why I think it is a workaround to charge!

5) Battery life: 8 hours overnight started fully charged in the morning down to 80% . Battery is OEM, 4 months old ,and looks like it will give 2 days life (with Power management patch applied).
A: It is ok. I want to post a small risky program that will prolong the battery life. But need some testing on my old battery.

6) A question: Google maps reports "My Location" not supported. I thought it used the base station on the mobile network to locate you if no GPS on the phone. Maybe I am wrong.
A: Maybe not. Google does not have the base station info of most countries.

7) Minor Bug ( Perhaps ), Have an incoming phone call, answer the call then press green phone icon/button to go to speaker phone. Incoming call then hangs up. Then I cant get rid of the speaker phone on the 6828. Keeps notifying that speaker phone is on.
A: Haven't encountered this problem. I may test it more. Other user's feedback is welcome!

8) If there is a way to stop SIM contacts displaying this would be nice.
A: I have posted a way yesterday. You can find it out.

I havent test IR, WIFI or Bluetooth. Hope this is useful. Keep up the good work
A: Thanks for your review and your encouragement.

[helloworld1]

Hi prash0715,

If you mean the files should be in _QHIDDENPARTITION after hard reset then no, they are not there. But on the other hand I have a different system response: "No camera detected" message instead of "No supported camera has been detected" error before hard reset with your files. So something happened ;)

Your problem is not _QHiddenPartition, it is driver's problem. I can not test it because I don't have a 6815. You may need to contact other people who succeeded making camera working in 6815.

[prash0715]

Hi prash0715,

If you mean the files should be in _QHIDDENPARTITION after hard reset then no, they are not there. But on the other hand I have a different system response: "No camera detected" message instead of "No supported camera has been detected" error before hard reset with your files. So something happened ;)

mm u try d other NHCOBNAMs ROM

[naset]

-IR,BT and WiFI all working for me.
-speaker phone works great.no problem at all.
-to make grps work,must delete the default gprs profile 1st,then add a new one.
-i have a new battery(only used a week),and it only last for 8-9 hours after fully charged with minimum usage.

BUG(maybe only me)-sim manager not working :(

[helloworld1]

-IR,BT and WiFI all working for me.
-speaker phone works great.no problem at all.
-to make grps work,must delete the default gprs profile 1st,then add a new one.
-i have a new battery(only used a week),and it only last for 8-9 hours after fully charged with minimum usage.

BUG(maybe only me)-sim manager not working :(

Sim Manager is not working well, but working.
You may need to go to contact, then select "Sim Information" then go to sim manager again.

[Pedro_PVO]

Loaded in ROM via Transcend 512 MB SD card. Worked well first time (once I got the Bootloader up).

1) To get phone to sync emails over GPRS had to delete modem and re-enter details then phone synced okay.

2) Camera locked first time used. Soft reset then worked no problem.

3) "PDA Status" backlight adjustment did not work. Used "Metrix" instead. Also used PDC download for bigger clock like HTC today screen which works well.

4) USB charging a bit funny on one PC which doesnt have active sync installed - had to change USB charge speed to get the phone to charge, same result with two cables (possible problem?) Works fine on two other PCs with active sync installed.

5) Battery life: 8 hours overnight started fully charged in the morning down to 80% . Battery is OEM, 4 months old ,and looks like it will give 2 days life (with Power management patch applied).

6) A question: Google maps reports "My Location" not supported. I thought it used the base station on the mobile network to locate you if no GPS on the phone. Maybe I am wrong.

7) Minor Bug ( Perhaps ), Have an incoming phone call, answer the call then press green phone icon/button to go to speaker phone. Incoming call then hangs up. Then I cant get rid of the speaker phone on the 6828. Keeps notifying that speaker phone is on.

8) If there is a way to stop SIM contacts displaying this would be nice.

I havent test IR, WIFI or Bluetooth. Hope this is useful. Keep up the good work!


See ? I have te same problem as in point number 3.
I can add this one: When you enter the "power" icon and click the "USB" label, the machine resets itself.
BTW, I have a "made in china" RW6828 and , in the past, when I tried to install one of the last ROM,s of a guy named NHOCBANME, it didn't work on my iPAQ. I was told that it was because of the "made in china" origin.
I hope that this problems helps to make a good ROM even a better one..
You are doing a great work...

[helloworld1]

See ? I have te same problem as in point number 3.
I can add this one: When you enter the "power" icon and click the "USB" label, the machine resets itself.
BTW, I have a "made in china" RW6828 and , in the past, when I tried to install one of the last ROM,s of a guy named NHOCBANME, it didn't work on my iPAQ. I was told that it was because of the "made in china" origin.
I hope that this problems helps to make a good ROM even a better one..
You are doing a great work...

mine is made in China too. Maybe all 6828 are made in China.

[naset]

sim manager worked for me now.thx hellowolrd1 for the info.

my 6828 was made in china too.i have no prob with that.

[hochengsoon]

Answers

5) Battery life: 8 hours overnight started fully charged in the morning down to 80% . Battery is OEM, 4 months old ,and looks like it will give 2 days life (with Power management patch applied).
A: It is ok. I want to post a small risky program that will prolong the battery life. But need some testing on my old battery.

Hi any tentative date on small risky program? Is it much better than PowerManagementPatch in terms of better battery life & not so taxing on performance? Now living with always charging when have the opportunity.

[helloworld1]

Hi any tentative date on small risky program? Is it much better than PowerManagementPatch in terms of better battery life & not so taxing on performance? Now living with always charging when have the opportunity.

This risky program will SURELY PROLONG your battery life not slightly but huge, probably depending on your battery condition.

It does not make the ROM more power saving. It only adjust the battery's chip! So it may corrupt your battery completely. Try it on old battery ONLY!
In my test, it will increase my old OEM battery from 2 hour life to more than 6 hour life!

The effect of this program can not be reverted! It only workd for OEM Battery of 6828/18/15/atom or 6828/18/15/atom batteries with OEM chip.

http://www.mediafire.com/?wczphdpknsw

[hochengsoon]

This risky program will SURELY PROLONG your battery life not slightly but huge, probably depending on your battery condition.

It does not make the ROM more power saving. It only adjust the battery's chip! So it may corrupt your battery completely. Try it on old battery ONLY!
In my test, it will increase my old OEM battery from 2 hour life to more than 6 hour life!

The effect of this program can not be reverted! It only workd for OEM Battery of 6828/18/15/atom or 6828/18/15/atom batteries with OEM chip.

http://www.mediafire.com/?wczphdpknsw

Whao! 3 X more. So there is no performance loss with this risky program.

I'm still using 2 years old original battery which means I can only try PowerManagementPatch with performance loss?

[helloworld1]

Whao! 3 X more. So there is no performance loss with this risky program.

I'm still using 2 years old original battery which means I can only try PowerManagementPatch with performance loss?

You can try this program. The older battery is, the better result and lesser loss. This program is one time used, benefit(or pain) one life. So no performance loss.

EDIT: Please report your the value of ILMD registry and LMD registry by clicking Get ILMD and LMD

[hochengsoon]

You can try this program. The older battery is, the better result and lesser loss. This program is one time used, benefit(or pain) one life. So no performance loss.

EDIT: Please report your the value of ILMD registry and LMD registry by clicking Get ILMD and LMD

U mentioned only work on OEM batteries. Mine is original. Can I try?

Sorry don't get your last request. How do I click Get ILMD and LMD?

[helloworld1]

U mentioned only work on OEM batteries. Mine is original. Can I try?

Sorry don't get your last request. How do I click Get ILMD and LMD?

OEM means Original Equipment Manufacture.
Original is OEM!
You can run that program. And you will know what I mean.

[hochengsoon]

OEM means Original Equipment Manufacture.
Original is OEM!
You can run that program. And you will know what I mean.

Stupid me. Always got impression OEM is not original.

Before = 1507, 822
After = 1507, 1507

So my battery now will last "3 X" longer? Fingers crossed.

[helloworld1]

Stupid me. Always got impression OEM is not original.

Before = 1507, 822
After = 1507, 1507

So my battery now will last "3 X" longer? Fingers crossed.

About 2X longer!
822 is your original battery conpacity.
1507 is ideal compacity.
This program reset your batter to ideal state.
Also set the critical battery level to 3.5V no matter what it is previously.
Mine is 457 mah originally.

[hochengsoon]

About 2X longer!
822 is your original battery conpacity.
1507 is ideal compacity.
This program reset your batter to ideal state.
Also set the critical battery level to 3.5V no matter what it is previously.
Mine is 457 mah originally.

:D:D I'm happy with 2X :D:D

Can I periodically run this apps, few months apart?

[helloworld1]

6815 ROM Tester NEEDED!

Any one want to test my 6815 ROM?
It tries to make the camera patch working.
It is based on b156 ROM.
I am not sure the camera is really working.
If it works. I may patch my German 6828 ROM and also port a French ROM!

ROM:
http://www.mediafire.com/?ay60ztsozz8
Camera Patch:
http://www.mediafire.com/?hnmhc8aewtc

[helloworld1]

:D:D I'm happy with 2X :D:D

Can I periodically run this apps, few months apart?

Yes. Once a month is OK.
NOTE:
If the battery voltage falls below 3.5V the device will power off itself to prevent battery damage no matter how many percentage of battery you have.
So you may expect the device suddenly power off when you still have 15% or 20% battery.

[trueloki]

6815 ROM Tester NEEDED!

Any one want to test my 6815 ROM?
It tries to make the camera patch working.
It is based on b156 ROM.
I am not sure the camera is really working.
If it works. I may patch my German 6828 ROM and also port a French ROM!

ROM:
http://www.mediafire.com/?ay60ztsozz8
Camera Patch:
http://www.mediafire.com/?hnmhc8aewtc

Hi,

I will test it as I prefer your ROM then the others, got 6815 and the only thing not working there is a camera. Will let you know about results.

[helloworld1]

Celebration!
Should held a party,
but only can I do lonely.
Never imagine this firstly,
Cannot tell lastly.
Hope I can support this post for long.
Hope I can see 20,000 shortly.
With more bug fixed,
The ROM will be comely.

[helloworld1]

Hi,

I will test it as I prefer your ROM then the others, got 6815 and the only thing not working there is a camera. Will let you know about results.

Thanks. I am looking forward to your testing result.

[q_ware]

it seems that my WMDC disconnects my phone after idle for 1 minute

it doesn't disconnect when there is data constantly transferring between PC <-> phone [happens on first time sync]

any idea?

I've tried installing / uninstalling WMDC many times already...
tried matching the same device CD also ...
still no hope :(

ooops...I think it's the Jeyo Mobile Companion 2.1 that screws things up, I'm not running it now and it seems to be working fine.. (I hope..)

[prash0715]

Celebration!
Should held a party,
but only can I do lonely.
Never imagine this firstly,
Cannot tell lastly.
Hope I can support this post for long.
Hope I can see 20,000 shortly.
With more bug fixed,
The ROM will be comely.
hahah u jokin hommie..... u r ROM is a HIT baby better den NHCOBANME

[naset]

wait!im still afraid to used that prolong battery application.it modified the chip in the phone isnt it?is it will damage my phone or not? also can i revert back to the original state after using this application?

answers needed. :)

[prash0715]

wait!im still afraid to used that prolong battery application.it modified the chip in the phone isnt it?is it will damage my phone or not? also can i revert back to the original state after using this application?

answers needed. :)
nthns gonna happ do symply get scared fer no reason!!!

[BesFen]

This risky program will SURELY PROLONG your battery life not slightly but huge, probably depending on your battery condition.

It does not make the ROM more power saving. It only adjust the battery's chip! So it may corrupt your battery completely. Try it on old battery ONLY!
In my test, it will increase my old OEM battery from 2 hour life to more than 6 hour life!

The effect of this program can not be reverted! It only workd for OEM Battery of 6828/18/15/atom or 6828/18/15/atom batteries with OEM chip.

http://www.mediafire.com/?wczphdpknsw

Dear Helloworld1,

I am very happy know that you finally released a program to prolong the battery life:D:D

I have any question about it, please inform me:
1. What is excactly your Program do?
2. can it make the device broken?
3. How often i must run the app? month once? or else?
4. How long is the battery durability after apply this app?

thank you for your explanation.