Very clean and stable WM6.1 roms for HP 6828 WWE b196 Update 21, /MUI/Atom/Kitchens

[SandMan1]

OOoooOOooOOoo!
God knows. Does it work after reset? Are you using the patch when this works? You're using b156 or 6815 testing one?

Yes it works after reset, I have both patches installed RU was installed first then the WWE. i currently have the b156 rom installed.

What is the difference between b156 and the 6815 rom?

[helloworld1]

Yes it works after reset, I have both patches installed RU was installed first then the WWE. i currently have the b156 rom installed.

What is the difference between b156 and the 6815 rom?

6815 r2 rom replaces 2 modules: camera.dll and quartz.dll
So the picture is up side down?

[kusanagi]

I installed WeFi (a WIFI hotspot finding program) and it also asks for .NET 2.0 to be installed (which I then did, and it works). But I also though .net 3.5 should work?

I had Wefi on b155 to try, I didn't get that problem, it installed and run fine, but I have now removed it.

K

[helloworld1]

Hi

Did by any chance, made a Battery Calibration software that is also compatible with the HTC Hermes and with the HTC Herald model?

thanx

Does Hermes use BQ27200 chip? You can strip the paper out of the battery and use a magnify to read the text on the chip. If one of the chips have "27200", the calibration program will work fine.
I am now modifying the program to display more information of the battery and make it safer.

[naset]

@helloworld1
i already try Prashanth's rom,and it's quite good.the sim manager works fine without opening the option 1st.can it be solved in your next update?

copy sms to sim also not works in Prashanth's rom.

[prash0715]

@helloworld1
i already try Prashanth's rom,and it's quite good.the sim manager works fine without opening the option 1st.can it be solved in your next update?

copy sms to sim also not works in Prashanth's rom.

actually aii never copied MEssages to sim y shld aii copy when aii hav lots of space in system am hving 378 messages in phone memory wihtout ny problems..if u want aii can provide u backup n restore software

[naset]

hehehe.actually i wanna save my sms that i really "love" in my sim so when i change to other phone that hav different OS,i still can read it.LOL

[prash0715]

hehehe.actually i wanna save my sms that i really "love" in my sim so when i change to other phone that hav different OS,i still can read it.LOL
mmmok aii neva used dis feature.......nywayz aii ll try to find a solutin it dat feature working in other ROMS???

[ogel2]

tried atom release 1....

camera is flickering..... too bad.... but nice work you got there helloworld1 :thumb:

[prash0715]

tried atom release 1....

camera is flickering..... too bad.... but nice work you got there helloworld1 :thumb:


u mean my camera feature is flickering change ur refresh rate to 60HZ

[kumkum]

hi friends,actually im using windows vista and after upgrade to sp1,im unable to upgrade my atom rom it says C/WINDOWS TEMP FAIL
WHAT SHOULD I DO?PLS HELP

[prash0715]

hi friends,actually im using windows vista and after upgrade to sp1,im unable to upgrade my atom rom it says C/WINDOWS TEMP FAIL
WHAT SHOULD I DO?PLS HELP

hahah creat a a folder named TEMP in windows folder and do flashing der it'll shurely work

[kumkum]

hey dear i've created temp folder in c but it says C/WINDOWS TEMP FAIL

[prash0715]

hey dear i've created temp folder in c but it says C/WINDOWS TEMP FAIL
mm wait do vista hav d folder named WINDOWS ....
aii think so some other name is give.....temme wat given

[helloworld1]

@helloworld1
i already try Prashanth's rom,and it's quite good.the sim manager works fine without opening the option 1st.can it be solved in your next update?

copy sms to sim also not works in Prashanth's rom.

I don't know what cause it. It is not a serious problem though.

[helloworld1]

tried atom release 1....

camera is flickering..... too bad.... but nice work you got there helloworld1 :thumb:

I forgot to change the driver from HP to Atom. The driver is ustable in Atom.

[prash0715]

I don't know what cause it. It is not a serious problem though.
mm he want to copy messages to sim how can u aii hav never tried dat featur heloworld

[helloworld1]

hehehe.actually i wanna save my sms that i really "love" in my sim so when i change to other phone that hav different OS,i still can read it.LOL

Very tough task. I have tried many ways to fix this. But all failed. ALL modified 6828 I have tested 6.1 ROM has this problem.

[naset]

its ok helloworld1.i will send the sms that i want to my other phone and save in my sim there.hehehe.problem solved. :)

[prash0715]

its ok helloworld1.i will send the sms that i want to my other phone and save in my sim there.hehehe.problem solved. :)
:D:phahahah.....

[hochengsoon]

hi friends,actually im using windows vista and after upgrade to sp1,im unable to upgrade my atom rom it says C/WINDOWS TEMP FAIL
WHAT SHOULD I DO?PLS HELP

Is the attached error what you got? Try copy & perform everything from C:\Windows\Temp folder. Works for me with WindowsXP.

[helloworld1]

hi friends,actually im using windows vista and after upgrade to sp1,im unable to upgrade my atom rom it says C/WINDOWS TEMP FAIL
WHAT SHOULD I DO?PLS HELP

Use administrator account and try again.

[helloworld1]

its ok helloworld1.i will send the sms that i want to my other phone and save in my sim there.hehehe.problem solved. :)

Haha, but all in all, this is a problem at the same level as Bluetooth DUN. I will keep an eye on other people's ROM and also try new ways myself.

[kt1me]

Does Hermes use BQ27200 chip? You can strip the paper out of the battery and use a magnify to read the text on the chip. If one of the chips have "27200", the calibration program will work fine.
I am now modifying the program to display more information of the battery and make it safer.

Hi
Thank you for your very promt reply!
I tryed to open the battery for get to the IC but I didnt succed so i try to run the software on both of the PDA and below is the result:

Get ILMD i will get the following Error "XllpI2Reads() failed"
after i press ok he will show me 5392mAh

Get LMD i will get the following Error "XllpI2Reads() failed"
after i press ok he will show me 868mAh

AND after I press Re-Calibration I Got again the error "XllpI2Reads() failed" for 3 times and after a message tell me that the calibration is complete but if I repeat the process and I still got the sam value for the LMD that is 868mAh

so please let me know if there is anyway to fix it!
thanx

[helloworld1]

Battery Calibration Software new version:
0. name changed to BQ27200Expert because it is more functional.
1. Safer, it will display incompatibility error more strictly.
2. New feature to allow you look inside your battery. It will tell you many accurate property that BQ27200 chip knows like Temperature, Voltage, Current, Battery design, Available energy as well as discharge cycles and standby current. The info is automatically updated, so you can track it.
3. Description is better.
4. Icon changed to BQ27200 chip. Hope you like it.

TODO:
1. Log battery activity to a file.
2. Let user change everything that can be changed manually in this chip.

For uploading problem, I don't include source this time. If you want source, please ask me or I will upload souce for the later versions.

[helloworld1]

Hi
Thank you for your very promt reply!
I tryed to open the battery for get to the IC but I didnt succed so i try to run the software on both of the PDA and below is the result:

Get ILMD i will get the following Error "XllpI2Reads() failed"
after i press ok he will show me 5392mAh

Get LMD i will get the following Error "XllpI2Reads() failed"
after i press ok he will show me 868mAh

AND after I press Re-Calibration I Got again the error "XllpI2Reads() failed" for 3 times and after a message tell me that the calibration is complete but if I repeat the process and I still got the sam value for the LMD that is 868mAh

so please let me know if there is anyway to fix it!
thanx

I know only BQ27200 chip. So this program can not be used on hermes. Sorry, I will NOT get this program supporting more chips.

[kt1me]

I know only BQ27200 chip. So this program can not be used on hermes. Sorry, I will NOT get this program supporting more chips.

ok
I got it
thank you

[battax]

Battery Calibration Software new version:
0. name changed to BQ27200Expert because it is more functional.
1. Safer, it will display incompatibility error more strictly.
2. New feature to allow you look inside your battery. It will tell you many accurate property that BQ27200 chip knows like Temperature, Voltage, Current, Battery design, Available energy as well as discharge cycles and standby current. The info is automatically updated, so you can track it.
3. Description is better.
4. Icon changed to BQ27200 chip. Hope you like it.

TODO:
1. Log battery activity to a file.
2. Let user change everything that can be changed manually in this chip.

For uploading problem, I don't include source this time. If you want source, please ask me or I will upload souce for the later versions.

What a wonderful application i´m speechless. Most certain the best application i ever seen for any pda.

I´m a lucky guy because it works on my 6815.
i had
1507 - 1047
and now
1507 - 1507 and battery dropped from 95% to 66% of charge.

YOU´RE THE MAN!!!!

[ogel2]

hi friends,actually im using windows vista and after upgrade to sp1,im unable to upgrade my atom rom it says C/WINDOWS TEMP FAIL
WHAT SHOULD I DO?PLS HELP
try to change permission in c:\windows\temp folder with full access for your user account. that works for me....

[helloworld1]

What a wonderful application i´m speechless. Most certain the best application i ever seen for any pda.

I´m a lucky guy because it works on my 6815.
i had
1507 - 1047
and now
1507 - 1507 and battery dropped from 95% to 66% of charge.

YOU´RE THE MAN!!!!

I should write a readme for this app. The calibration is done after you drain your battery and charge again. It may drop to 1234 mah or something. This is normal. Do not run this app too often! Only use it when you feel the battery life is too short. to bear.
Now this app can identify how old a battery is. Check the cyct register! So try this app to identity batteries before buying a new one. But if you calibrate the battery, the cycle returns to zero!

[roma_pop]

6815 r2 rom replaces 2 modules: camera.dll and quartz.dll
So the picture is up side down?

When you look on display - image in display is upside down,
when you take a picture - picture is ok (upside up)

Thanks

[naset]

any news on updated rom release date?hehehe

[helloworld1]

any news on updated rom release date?hehehe

No update recently. I will notify updates when I resolve some bugs.

[naset]

what is the main bugs that u want to solved helloworld1?

[helloworld1]

what is the main bugs that u want to solved helloworld1?

Maybe "copy sms to sim", keylock and [insert your suggestion here].

[hochengsoon]

I should write a readme for this app. The calibration is done after you drain your battery and charge again. It may drop to 1234 mah or something. This is normal. Do not run this app too often! Only use it when you feel the battery life is too short. to bear.
Now this app can identify how old a battery is. Check the cyct register! So try this app to identity batteries before buying a new one. But if you calibrate the battery, the cycle returns to zero!

Referring to your statement above do you mean allow it to drain until device switch off by itself, charge it to 100% before running the apps to get optimum re-calibration results?

[helloworld1]

Referring to your statement above do you mean allow it to drain until device switch off by itself, charge it to 100% before running the apps to get optimum re-calibration results?

No, just use it normally until the device get to 0% battery level or get power off itself. As soon as you recharge it again, you will see the actual battery capacity in this app.

[naset]

Maybe "copy sms to sim", keylock and [insert your suggestion here].
may i suggest sim manager and mms camera too?hehehe.

[kusanagi]

Maybe "copy sms to sim", keylock and [insert your suggestion here].

and... "import from camera?"

K

[naset]

one more..can u remove MS Office and change to Softmaker Office 2008? This software was more powerful than default MS Office.
i will provide the link to download this software if u want. :)

[helloworld1]

one more..can u remove MS Office and change to Softmaker Office 2008? This software was more powerful than default MS Office.
i will provide the link to download this software if u want. :)

Sorry, I won't include such software what require people to pay US$ 79.95!! It is terrible to include this kind of often-updated non-free software. It is just like make an Ad. for SoftMaker asking poeple to pay after 30-day free trial.

[prash0715]

Sorry, I won't include such software what require people to pay US$ 79.95!! It is terrible to include this kind of often-updated non-free software. It is just like make an Ad. for SoftMaker asking poeple to pay after 30-day free trial.

dude a u ONLINE plz cm n help me....!!!

[naset]

Sorry, I won't include such software what require people to pay US$ 79.95!! It is terrible to include this kind of often-updated non-free software. It is just like make an Ad. for SoftMaker asking poeple to pay after 30-day free trial.
even with crack?hehehe.

[prash0715]

even with crack?hehehe.
mm send it dude let me check it out????:D:D

[BesFen]

even with crack?hehehe.
Better Clean ROM like an Original M$, I think, not all prople like additionl app althought with c***k.

[kusanagi]

Better Clean ROM like an Original M$, I think, not all prople like additionl app althought with c***k.

Yeah... I'm pretty sure the high popularity of this ROM is due to it's CLEAN, so please... keep it that way.

For those who wanted 3rd party commercial software, they can buy and install it themselves, or install whatever they want, not all people require such softwares.

Just keep a good, clean, bugs free, based OS, as anything can be added on later on.

K

[hochengsoon]

Yeah... I'm pretty sure the high popularity of this ROM is due to it's CLEAN, so please... keep it that way.

For those who wanted 3rd party commercial software, they can buy and install it themselves, or install whatever they want, not all people require such softwares.

Just keep a good, clean, bugs free, based OS, as anything can be added on later on.

K

ya, clean is the way. let us choose what we want.

[PhunKEE]

Good Day Guys,

Specially the cooks and other enthusiastic buddies, do you have a solution for Phone pad for the current WM 6.1 rom? I still could not find one other than the old HTC phone pad that will not work.

Any solution?

Thanks

[prash0715]

Good Day Guys,

Specially the cooks and other enthusiastic buddies, do you have a solution for Phone pad for the current WM 6.1 rom? I still could not find one other than the old HTC phone pad that will not work.

Any solution?

Thanks

wat do u exactly want????

[helloworld1]

Good Day Guys,

Specially the cooks and other enthusiastic buddies, do you have a solution for Phone pad for the current WM 6.1 rom? I still could not find one other than the old HTC phone pad that will not work.

Any solution?

Thanks

HTC Phonepad is working, What do you want?

[dincth13]

how can i install the radio.rar ?? in usefull apps...

files inside the radio :

- vl1d_pda_Ver.mot
- nova_pda_033105.mot

any ideas installing this radio file into my RW6828 ??
sorry to asking basic question...im a newbie...
thx b 4....

[helloworld1]

how can i install the radio.rar ?? in usefull apps...

files inside the radio :

- vl1d_pda_Ver.mot
- nova_pda_033105.mot

any ideas installing this radio file into my RW6828 ??
sorry to asking basic question...im a newbie...
thx b 4....

These are radio files. But I think you should not install this. Instead, you should use the full update from HP.

[dincth13]

did you know the link to update from HP ??
so what is included in the update ?
rom ??
apps ??
bootloader ??
radio ??
or what ??
thx helloworld for u're help....

[SandMan1]

Helloworld1 / somebody please tell me if there is a way to extract files from the .nb0 file. Nhocbanme had a version of the srs wow installed that fixed the volume issues on the 6815. I have downloaded 5 different verions and none of them have the two settings that are installed with his ROM.

OR

Anybody else have a fix for the low ring volume??

Thanx

[BesFen]

Helloworld1 / somebody please tell me if there is a way to extract files from the .nb0 file. Nhocbanme had a version of the srs wow installed that fixed the volume issues on the 6815. I have downloaded 5 different verions and none of them have the two settings that are installed with his ROM.

OR

Anybody else have a fix for the low ring volume??

Thanx

You can try this SRS WOW:)

[prash0715]

Helloworld1 / somebody please tell me if there is a way to extract files from the .nb0 file. Nhocbanme had a version of the srs wow installed that fixed the volume issues on the 6815. I have downloaded 5 different verions and none of them have the two settings that are installed with his ROM.

OR

Anybody else have a fix for the low ring volume??

Thanx
Hmmm u want ur PDA to RING louder......hmm try my ROM
http://forum.xda-developers.com/showthread.php?t=417059
it has louder system volume after u install Dis ROM install SRSWOW HD aii ll provied u der give everthin hig......ull hav good sound

[andrechua]

Sorry, I won't include such software what require people to pay US$ 79.95!! It is terrible to include this kind of often-updated non-free software. It is just like make an Ad. for SoftMaker asking poeple to pay after 30-day free trial.

Hi Helloworld1,

I'm very happy with your stand on this. the reason many people, i believe, in choosing to use your rom is because of it's "pure" objectives even if it's M$! :D

Be true to the title ...

[helloworld1]

did you know the link to update from HP ??
so what is included in the update ?
rom ??
apps ??
bootloader ??
radio ??
or what ??
thx helloworld for u're help....

I think you can search this thread, I have posted it. Also you can search google for 0.34 radio.

[helloworld1]

Helloworld1 / somebody please tell me if there is a way to extract files from the .nb0 file. Nhocbanme had a version of the srs wow installed that fixed the volume issues on the 6815. I have downloaded 5 different verions and none of them have the two settings that are installed with his ROM.

OR

Anybody else have a fix for the low ring volume??

Thanx

SRS is not compatible with apps like voicebook2. So I will never include this in my rom. All SRS contains the atom life sound driver that increase volume.

[helloworld1]

Hi Helloworld1,

I'm very happy with your stand on this. the reason many people, i believe, in choosing to use your rom is because of it's "pure" objectives even if it's M$! :D

Be true to the title ...

Yes I will not include softwares that is not necessary or often-updated. But I will constantly fix bugs and update the internals. The only thing that is absolute is no absolute. There is no absolute best rom. So I recommend people trying more than one people's rom and find out your personal best. I never say cleanliness is the best but it is my personal best.

[helloworld1]

Hmmm u want ur PDA to RING louder......hmm try my ROM
http://forum.xda-developers.com/showthread.php?t=417059
it has louder system volume after u install Dis ROM install SRSWOW HD aii ll provied u der give everthin hig......ull hav good sound

It is the same like installing it. He is asking for version 1.2.5 with o2 eq.

[hochengsoon]

Hmmm u want ur PDA to RING louder......hmm try my ROM
http://forum.xda-developers.com/showthread.php?t=417059
it has louder system volume after u install Dis ROM install SRSWOW HD aii ll provied u der give everthin hig......ull hav good sound

prash, good job but don't solicit people to use your ROM from other people thread.

[kumar_r100]

Does anyone experience like what I had? when I use the 6828 wm 6.1 rom, my EDGE connection can't go over 64kbps.

[hochengsoon]

did you know the link to update from HP ??
so what is included in the update ?
rom ??
apps ??
bootloader ??
radio ??
or what ??
thx helloworld for u're help....

ftp://ftp.hp.com/pub/softpaq/sp34001-34500/sp34053.exe

[SandMan1]

Thanx BesFen, thats what i was looking for.

[prash0715]

prash, good job but don't solicit people to use your ROM from other people thread.
ahhhhaaa its not like pulling plp using my ROM......its just an advise.....helloworlds rom is better dan my ROM.....he's my teacher.....y d hell will aii pull people use my ROM:mad::mad:bad bad thinking friend

[prash0715]

SRS is not compatible with apps like voicebook2. So I will never include this in my rom. All SRS contains the atom life sound driver that increase volume.
yap we cant simply add SRS WOWHD into the ROM better to install externaly:)

[prash0715]

Does anyone experience like what I had? when I use the 6828 wm 6.1 rom, my EDGE connection can't go over 64kbps.
hmmmm 64Kbps is faster hehehhe actulally d speed depends on ur service provider.....its nt ur Device problem:D

[kumar_r100]

hmmmm 64Kbps is faster hehehhe actulally d speed depends on ur service provider.....its nt ur Device problem:D

thanks for your reply.
Same sim card(provider) on a HP Voice Messenger 612 can get near 200kbps. any clue?

[helloworld1]

Does anyone experience like what I had? when I use the 6828 wm 6.1 rom, my EDGE connection can't go over 64kbps.

No, I have fast edge connection, at maximum about 20-30KB(160-240kbps).
You can set at settings ->phone ->gprs->advanced.

[andrechua]

Hi Helloworld1,

Just to let you know and anyone else that may be interested.

I just hooked in a 8gb microsdhc using a minisd adapter and it works!

This is awesome! Now my whole mp3 collection is on the card ... and there's 3 more GB to fill up! :D

[helloworld1]

Hi Helloworld1,

Just to let you know and anyone else that may be interested.

I just hooked in a 8gb microsdhc using a minisd adapter and it works!

This is awesome! Now my whole mp3 collection is on the card ... and there's 3 more GB to fill up! :D

Glad hearing that and thanks for your report. I may buy a new larger card too.

[JapanLover]

Hi helloworld1,

since I already have one of your first 6.1 releases installed on my HP, I would really like to know is the latest one (b158) will work on the 6815 or if it is for 6828 only.
I read there is a 6815 version based on b156, but well... I do like to always have the most up to date release. At least... I don't update often, but when I do so... I prefer new ones :D

Thanx a lot!!!

[trueloki]

No, just use it normally until the device get to 0% battery level or get power off itself. As soon as you recharge it again, you will see the actual battery capacity in this app.

Your ROM is very good, I am using the version tuned for 6815 and so far I am very happy with it. The battery hack is not so good however, please find the result of my test below:
- Capacity before calibration 1507/776 (51%)
- Capacity after calibration 1507/1507 (100%) - I know this is not a true one
- Capacity after a first cycle 1507/1279 (85%) - this should be a true one
- Capacity after a second cycle 1507/1142 (76%) - surpise :(

And for this second cycle my device switched off "powerless" when I a minute before it displayed +/- 50% of the battery level. Not nice. I will let you know what next cycles will bring. I did this test with my old battery delivered to me from HP together with my iPAQ, so no doubt this is OEM.

[kumar_r100]

No, I have fast edge connection, at maximum about 20-30KB(160-240kbps).
You can set at settings ->phone ->gprs->advanced.

I have tried Class 8 (4R1T) and Class 10 (3R2T), both also slow.

I have the b156 rom and 0.34 Radio Firmware.

Could it be my device is faulty?

[helloworld1]

Hi helloworld1,

since I already have one of your first 6.1 releases installed on my HP, I would really like to know is the latest one (b158) will work on the 6815 or if it is for 6828 only.
I read there is a 6815 version based on b156, but well... I do like to always have the most up to date release. At least... I don't update often, but when I do so... I prefer new ones :D

Thanx a lot!!!

Where is b158? I have never released such version. The latest is b156.

[prash0715]

I have tried Class 8 (4R1T) and Class 10 (3R2T), both also slow.

I have the b156 rom and 0.34 Radio Firmware.

Could it be my device is faulty?
mm aii don think so the device may b faulty....it happend.....some time,.,.....c the OS ll b working fine in Cooks fone.....but d clients say it aint working.......hmm it may b dude to bad flashing....or may b u hav meddeled with some files..???

[helloworld1]

I have tried Class 8 (4R1T) and Class 10 (3R2T), both also slow.

I have the b156 rom and 0.34 Radio Firmware.

Could it be my device is faulty?

No. I think maybe it is the compatibility problem of the network. You know, the signal is not very stable on my 6828 even on the first day I bought it.

[helloworld1]

Your ROM is very good, I am using the version tuned for 6815 and so far I am very happy with it. The battery hack is not so good however, please find the result of my test below:
- Capacity before calibration 1507/776 (51%)
- Capacity after calibration 1507/1507 (100%) - I know this is not a true one
- Capacity after a first cycle 1507/1279 (85%) - this should be a true one
- Capacity after a second cycle 1507/1142 (76%) - surpise :(

And for this second cycle my device switched off "powerless" when I a minute before it displayed +/- 50% of the battery level. Not nice. I will let you know what next cycles will bring. I did this test with my old battery delivered to me from HP together with my iPAQ, so no doubt this is OEM.

Emm, it is a problem. I have said that this program has some severe side-effect. Your device may be forced to turn off at 80% energy. Try more cycles and report it to me. I do not really know how the battery's recalibration function works because I just set the cycle to 0 so that the battery is treated as a new battery and do the first-time-used recalibration.

[naset]

Hi helloworld1,

since I already have one of your first 6.1 releases installed on my HP, I would really like to know is the latest one (b158) will work on the 6815 or if it is for 6828 only.
I read there is a 6815 version based on b156, but well... I do like to always have the most up to date release. At least... I don't update often, but when I do so... I prefer new ones :D

Thanx a lot!!!
i tot u already released version b158.LOL

[prash0715]

i tot u already released version b158.LOL
hehehehhehehe

[JapanLover]

Where is b158? I have never released such version. The latest is b156.

AHAHAHAH ROTFL!!! I just read "update 18" and didn't even look at b156.. cnfused!!! :rolleyes::rolleyes:

thnx anyway!! :)

[JapanLover]

hehehehhehehe

ROTFL! I do need some vacation!!! :D

[helloworld1]

AHAHAHAH ROTFL!!! I just read "update 18" and didn't even look at b156.. cnfused!!! :rolleyes::rolleyes:

thnx anyway!! :)

Maybe my version number is more confusing. Update xx is release number. bxxx is internal build number generated by my script.

[voquie]

Battery Calibration Software new version:
0. name changed to BQ27200Expert because it is more functional.
1. Safer, it will display incompatibility error more strictly.
2. New feature to allow you look inside your battery. It will tell you many accurate property that BQ27200 chip knows like Temperature, Voltage, Current, Battery design, Available energy as well as discharge cycles and standby current. The info is automatically updated, so you can track it.
3. Description is better.
4. Icon changed to BQ27200 chip. Hope you like it.

TODO:
1. Log battery activity to a file.
2. Let user change everything that can be changed manually in this chip.

For uploading problem, I don't include source this time. If you want source, please ask me or I will upload souce for the later versions.

hai helloworld...
for what this software? sory if the stupid question. if i get this software, the reset BQ2007 must instal first or not. or this is the new software of the reset BQ2007.
thx

[bjkolev]

Your ROM is very good, I am using the version tuned for 6815 and so far I am very happy with it. The battery hack is not so good however, please find the result of my test below:
- Capacity before calibration 1507/776 (51%)
- Capacity after calibration 1507/1507 (100%) - I know this is not a true one
- Capacity after a first cycle 1507/1279 (85%) - this should be a true one
- Capacity after a second cycle 1507/1142 (76%) - surpise :(

And for this second cycle my device switched off "powerless" when I a minute before it displayed +/- 50% of the battery level. Not nice.

The same situation, but before calibration 1507/~ 750-850 (I do not remember the original value). And wenn I charge after that the battery - imediatly jump from 55% to 100%.
I think, that the battery is the same capacity, but the %-show is not accurate.
Sorry for my English! :)


P.S.
3. cycle 1507 / 1005 mAh
4. cycle 1507 / 868 mAh
5. cycle 1507 / 731 mAh (switched off "powerless" by 20% in 4. cycle)

[helloworld1]

hai helloworld...
for what this software? sory if the stupid question. if i get this software, the reset BQ2007 must instal first or not. or this is the new software of the reset BQ2007.
thx

Newer version of reset bq27200. Stand-alone app.

[hochengsoon]

very quiet lately...

[ogel2]

i hope mr. helloworld1 will be release another clean atom ROM...

[helloworld1]

i hope mr. helloworld1 will be release another clean atom ROM...

OK, WHAT is your suggestion?

[helloworld1]

very quiet lately...

Very quite yesterday.

[ogel2]

OK, WHAT is your suggestion?
i thought there's a few bugs in your last atom rom, such as camera, fm radio, restarting randomly and battery drain quickly (that's what happened to me using your ROM lately)
and maybe switch file explorer to resco (trial)? :)

[BesFen]

Very quite, maybe everybody go to vacation.......... and they forget to pick their PDA.:D

[helloworld1]

i thought there's a few bugs in your last atom rom, such as camera, fm radio, restarting randomly and battery drain quickly (that's what happened to me using your ROM lately)
and maybe switch file explorer to resco (trial)? :)

I will try to incorporate the latest 6828 ROM to Atom and you may test it later.

[ogel2]

I will try to incorporate the latest 6828 ROM to Atom and you may test it later.
can't wait for the ROM, bro ;)

[xudsa II USERT]

still, in my opinion, helloworld1 makes the best roms!:D

[BesFen]

Hi helloworld1,

I can't connect to GPRS while the E (EDGE) symbol near the radio's signal appear, i try to connect at another locatio nwith EDGE symbol and still can,t establish connection, I only can connect while G symbo appear. is this normal?

[helloworld1]

Hi helloworld1,

I can't connect to GPRS while the E (EDGE) symbol near the radio's signal appear, i try to connect at another locatio nwith EDGE symbol and still can,t establish connection, I only can connect while G symbo appear. is this normal?

It is not normal! I can connect both EDGE or GPRS easily. You may need to do a soft reset when you cannot connect. Also, the signal strenth may be weak. Try other location. Hope these can help.

[helloworld1]

can't wait for the ROM, bro ;)

Be patient. I am so busy these days that I barely have time to support this thread.
Also, I don't have Atom so that you need to help me testing the ROM, which may not even boot.

[kusanagi]

Hi Helloworld,

Sorry this is a bit off 6828's topic.

Last week, I bit the bullet and bought an HTC Diamond!! I'm still keeping my 6828 as my spare, so please don't brand me as a traitor yet... :), I have to say this device is just gorgeous... but here's the problem, I can't read or write Chinese on this WWE ROM. (BTW, I have already searched the Diamond section in this forum for few hours to no avail on this issue)

Since you are a knowledgeable person, do you know if there is a CJK font pack in .cab I can install? If there is, would you be able to provide that for me? I have also noticed that it has anti-alias font rendering throughout, can the CJK font do the same?

Do you know if the Samsung Pen works on the Diamonds 480x640 screen? If not do you have any good suggesetions?

Thanks!!

K

[helloworld1]

Hi Helloworld,

Sorry this is a bit off 6828's topic.

Last week, I bit the bullet and bought an HTC Diamond!! I'm still keeping my 6828 as my spare, so please don't brand me as a traitor yet... :), I have to say this device is just gorgeous... but here's the problem, I can't read or write Chinese on this WWE ROM. (BTW, I have already searched the Diamond section in this forum for few hours to no avail on this issue)

Since you are a knowledgeable person, do you know if there is a CJK font pack in .cab I can install? If there is, would you be able to provide that for me? I have also noticed that it has anti-alias font rendering throughout, can the CJK font do the same?

Do you know if the Samsung Pen works on the Diamonds 480x640 screen? If not do you have any good suggesetions?

Thanks!!

K

Diamond is my dream device.
As for CJK Problem, I haven't made a cab package. But you can add it very easily. Taken "Microsoft YaHei" Font for example. You can download one(msyh.ttf, 14.3M) or copy the msyht.ttf(10.3M) from your 6828 of my ROM. Copy msyht.ttf into /windows/
Then edit the registry:
/HKLM/Software/Microsoft/FontLink/SystemLink/:
Then Edit
"Tahoma" = "\\windows\\msyht.ttf, Microsoft YaHei"
Then reset your device.
OK.
If you want to set regional to "PRC" or some asian areas.
You will need to copy wince.nls to replace the same file in your /windows/

I don't have an idea on 192dpi devices. Sorry. You may need to test it out yourself.
EDIT: I would like to know the Diamond's OS build number on your device.

[kusanagi]

Diamond is my dream device.
As for CJK Problem, I haven't made a cab package. But you can add it very easily. Taken "Microsoft YaHei" Font for example. You can download one(msyh.ttf, 14.3M) or copy the msyht.ttf(10.3M) from your 6828 of my ROM. Copy msyht.ttf into /windows/
Then edit the registry:
/HKLM/Software/Microsoft/FontLink/SystemLink/:
Then Edit
"Tahoma" = "\\windows\\msyht.ttf, Microsoft YaHei"
Then reset your device.
OK.
If you want to set regional to "PRC" or some asian areas.
You will need to copy wince.nls to replace the same file in your /windows/

I don't have an idea on 192dpi devices. Sorry. You may need to test it out yourself.
EDIT: I would like to know the Diamond's OS build number on your device.

Hey thanks for the tips, I'll give it a go and report back.

Haha, don't dream it, start saving up and get one! the Touch Pro is only around the corner hehe... I was actually considering the iPhone 3G, I love it's app store and I have a almost Mac everything at home, but the iphone is really too big that would make me look like a dork on the street... and Diamond can do so much more with my unlimited HSDPA!!

Oh, the OS version is:
CE OS 5.2.19591 (Build 19591.1.1.6)

I think my Diamond is the DIAM130 model, which support the 850mhz 7.2m HSDPA, and HSUPA.

Thanks,

K

[helloworld1]

Hey thanks for the tips, I'll give it a go and report back.

Haha, don't dream it, start saving up and get one! the Touch Pro is only around the corner hehe... I was actually considering the iPhone 3G, I love it's app store and I have a almost Mac everything at home, but the iphone is really too big that would make me look like a dork on the street... and Diamond can do so much more with my unlimited HSDPA!!

Oh, the OS version is:
CE OS 5.2.19591 (Build 19591.1.1.6)

I think my Diamond is the DIAM130 model, which support the 850mhz 7.2m HSDPA, and HSUPA.

Thanks,

K

I like HSDPA, but I think it won't appear here in 1 year and even longer before it gets affordable. Maybe I will study abroad and try it earlier! Haha, who knows. I may consider OpenMoko devices as my next phone. It is fully open-sourced so I can even modify the kernel or something.
It does not support 3G though. I will stick on my 6828 until it dies naturally.

[kusanagi]

I like HSDPA, but I think it won't appear here in 1 year and even longer before it gets affordable. Maybe I will study abroad and try it earlier! Haha, who knows. I may consider OpenMoko devices as my next phone. It is fully open-sourced so I can even modify the kernel or something.
It does not support 3G though. I will stick on my 6828 until it dies naturally.

Oh, never heard of OpenMoko, I will get one only if you get one, so that I will be sure that this phone has the best support... from you hehe.

Yeah, we have 7.2m HSDPA here, but only from Telstra which is very well known for extreme high cost, my carrier is Optus, it's only running at normal 3G (not 7.2m) at 2100mhz, so the coverage is very crap and a lot slower.

Yay! come to Australia!! IT is pretty good here.

Edit: the Yahei font worked!! thanks!! all CJK texts have anti-alias, very nice! but samsung pen didn't work, the panel is so tiny! but can still write though, and full screen causes some errors.

Edit2: Myscript Stylus worked beautifully, and it support all CJK inputs!! and do multiple character or full screen at the same time... but cost 44.95 euro!!! OUCH!

K

[zerosynergie]

I cant believe my own eyes! my 6828 now has wm6.1! i thought of throwing this useless phone when i came upon your thread!! complete noob here and i followed your simple instructions and viola! my 6828 now packs 6.1!!! thank you so much!! i used this one 20080810b156: http://www.mediafire.com/?ltjczyzryxn


also tried the battery calibration

1507 - 1507
1507 - 228

after

1507 - 1507
1507 - 1507

hope it does what it promises, hated this phone for lasting only 2 hours on use!!

havent tried to insert sim into it, ( phone lost signal long ago then cannot get any gsm signal anymore so stopped using it until now)

i better go to hk and buy a new body for it! lolz! BTW im from macau!

[helloworld1]

I cant believe my own eyes! my 6828 now has wm6.1! i thought of throwing this useless phone when i came upon your thread!! complete noob here and i followed your simple instructions and viola! my 6828 now packs 6.1!!! thank you so much!! i used this one 20080810b156: http://www.mediafire.com/?ltjczyzryxn


also tried the battery calibration

1507 - 1507
1507 - 228

after

1507 - 1507
1507 - 1507

hope it does what it promises, hated this phone for lasting only 2 hours on use!!

havent tried to insert sim into it, ( phone lost signal long ago then cannot get any gsm signal anymore so stopped using it until now)

i better go to hk and buy a new body for it! lolz! BTW im from macau!

This is the worst battery I have ever seen. The battery will only be calibrated after about 2 cycles (Complete charge and discharge, the device may turn off itself after fully discharged). Then the capacity will below 1507 mah. In my case, it is 1153mah.

[kusanagi]

Oh, never heard of OpenMoko, I will get one only if you get one, so that I will be sure that this phone has the best support... from you hehe.

Yeah, we have 7.2m HSDPA here, but only from Telstra which is very well known for extreme high cost, my carrier is Optus, it's only running at normal 3G (not 7.2m) at 2100mhz, so the coverage is very crap and a lot slower.

Yay! come to Australia!! IT is pretty good here.

Edit: the Yahei font worked!! thanks!! all CJK texts have anti-alias, very nice! but samsung pen didn't work, the panel is so tiny! but can still write though, and full screen causes some errors.

Edit2: Myscript Stylus worked beautifully, and it support all CJK inputs!! and do multiple character or full screen at the same time... but cost 44.95 euro!!! OUCH!

K

TouchPal worked too! and better, it has predictive PinYin input!! you will need to download a free language pack for either PinYin or Chanjie and PinYin. I'm happy now.

K

[helloworld1]

TouchPal worked too! and better, it has predictive PinYin input!! you will need to download a free language pack for either PinYin or Chanjie and PinYin. I'm happy now.

K

Good! Is SPB Pocket Plus working proper, Does it prompt after installation? How is the battery life?

[hochengsoon]

Hi Helloworld,

Sorry this is a bit off 6828's topic.

Last week, I bit the bullet and bought an HTC Diamond!! I'm still keeping my 6828 as my spare, so please don't brand me as a traitor yet... :), I have to say this device is just gorgeous... but here's the problem, I can't read or write Chinese on this WWE ROM. (BTW, I have already searched the Diamond section in this forum for few hours to no avail on this issue)

Since you are a knowledgeable person, do you know if there is a CJK font pack in .cab I can install? If there is, would you be able to provide that for me? I have also noticed that it has anti-alias font rendering throughout, can the CJK font do the same?

Do you know if the Samsung Pen works on the Diamonds 480x640 screen? If not do you have any good suggesetions?

Thanks!!

K

How much you pay for it in Aus? Cost RM2,799 in M'sia.

[bjkolev]

The same situation, but before calibration 1507/~ 750-850 (I do not remember the original value). And wenn I charge after that the battery - imediatly jump from 55% to 100%.
I think, that the battery is the same capacity, but the %-show is not accurate.
Sorry for my English! :)


P.S.
3. cycle 1507 / 1005 mAh
4. cycle 1507 / 868 mAh
5. cycle 1507 / 731 mAh (switched off "powerless" by 20% in 4. cycle)

6. cycle 1507 / 639 mAh (switched off "powerless" by 20% in 5. cycle)
7. cycle 1507 / 548 mAh (switched off "powerless" by 20% in 6. cycle CYCT_H = 0x3 - Total cycles: 3 ??? Why 3?

[killswitch28]

need help my wifi not working after rom upgrade, cant turn on. help please.....

[helloworld1]

6. cycle 1507 / 639 mAh (switched off "powerless" by 20% in 5. cycle)
7. cycle 1507 / 548 mAh (switched off "powerless" by 20% in 6. cycle CYCT_H = 0x3 - Total cycles: 3 ??? Why 3?

Maybe your battery's physical condition is bad so that calibration is of no use at all. The cycle means discharging and charging energy equivalent to the ILMD.

[helloworld1]

need help my wifi not working after rom upgrade, cant turn on. help please.....


I do not have this problem. What is your device, which rom and does that happen right after hard reset?

[kusanagi]

Good! Is SPB Pocket Plus working proper, Does it prompt after installation? How is the battery life?

I didn't installed SPB Pocket Plus, due to it's TouchFlo3D interface, because the TFL3D will disable EVERYTHING that lives on the today screen, with TFL3D running, you can't drop back to today screen like you could with SPB Mobile Shell, simply saying, with TFL3D on, you will never see your today screen.

This causes a problem for me where it stop me from using PhoneAlarm which I just renewed the license, it needs to be running on today screen to be effective.

The HTC interface covers about 80% of all the phone's hardware functionality, and it conceal pretty much all WM6.1's interface, and for the whole day I didn't have to pull out the stylus.

As for battery, I only have the phone for the 4th day, so I can't tell yet, but so far I had one recharge cycle (from full to complete drain), that lasted me 24 hours, but I was pretty much toying with it most of the day with HSDPA and pushmail on, I do feel that the WIFI drain the battery more than the HSDPA though, it's very good consider the battery is only 900mAh! My 6828 only lasted me 5 hours with similar play.

K

[kusanagi]

How much you pay for it in Aus? Cost RM2,799 in M'sia.

I paid AUD$800 for it, with today's exchange rate, it's ~RM$2322.90.

It is $999 retail, so ~RM$2960.

I went to 3 different shops, the first two won't budge on the $999 price, take it or go away kind of attitude, the 3rd shop offer me $149 discount straight away if I decide to get one RIGHT NOW, so I asked if they could match the price in the city store and they did, so I bought it.

Mind you though, the TD (Touch Diamond) I have, is from Telstra (Biggest telco in Australia), with Telstra branded logo on the back, it has some minor Telstra software customisation.

Telstra has the exclusive right with HTC at the moment to sell the Diam130, which is the latest hardware revision that can run on 7.2m 850mhz, and this Diam130 can't be bought anywhere in Australia except through them, so any unbranded TD is the old imported Asian Diam100. And I don't believe this Diam130 is released oversea yet.

I only found this out after I bought it.

EDIT: I have found a contact at a shop who he claims can get it for under $700 or less under the counter, but I need a tax invoice and for warranty purpose, I didn't take it.

K

[helloworld1]

I paid AUD$800 for it, with today's exchange rate, it's ~RM$2322.90.

It is $999 retail, so ~RM$2960.

I went to 3 different shops, the first two won't budge on the $999 price, take it or go away kind of attitude, the 3rd shop offer me $149 discount straight away if I decide to get one RIGHT NOW, so I asked if they could match the price in the city store and they did, so I bought it.

Mind you though, the TD (Touch Diamond) I have, is from Telstra (Biggest telco in Australia), with Telstra branded logo on the back, it has some minor Telstra software customisation.

Telstra has the exclusive right with HTC at the moment to sell the Diam130, which is the latest hardware revision that can run on 7.2m 850mhz, and this Diam130 can't be bought anywhere in Australia except through them, so any unbranded TD is the old imported Asian Diam100. And I don't believe this Diam130 is released oversea yet.

I only found this out after I bought it.

EDIT: I have found a contact at a shop who he claims can get it for under $700 or less under the counter, but I need a tax invoice and for warranty purpose, I didn't take it.

K

The old model of Diamond without a contract in China is 4000 RMB (~600 AUD,580USD). But there is no WCDMA in China, so 3G is quite useless. VGA screen is great. I wonder why the power consumption is small in diamond. It should consume more power than 6828. Also I once had a Palm Tungsten T3 which has 900 mah battery but offer me only 6 hour power.

[farukb]

The old model of Diamond without a contract in China is 4000 RMB (~600 AUD,580USD). But there is no WCDMA in China, so 3G is quite useless. VGA screen is great. I wonder why the power consumption is small in diamond. It should consume more power than 6828. Also I once had a Palm Tungsten T3 which has 900 mah battery but offer me only 6 hour power.

it should but it doesn't
last week i was testing diamond and it could stay for about 2 days without charging (shipped rom and radio with few tweaks)

rw6828 can stay for about 2-3 days (also shiped rom and radio,no tweaks)

so when you compare it

950mA : 1530mA = 2 : 2.5

so you can clearly see that diamond's consumption is smaller

as i said this is for shipped radio and rom for both devices

[trueloki]

Maybe your battery's physical condition is bad so that calibration is of no use at all. The cycle means discharging and charging energy equivalent to the ILMD.

It's not the battery, as I have the same problem. It's just letting your device to shut down due to a lack of power is a signal to a battery to reduce the capacity. It is a known problem of Li-Ion batteries which should not be reduced to less then 10% of capacity as it reduce their lifspan.

[killswitch28]

I do not have this problem. What is your device, which rom and does that happen right after hard reset?

i have rw6828, after i flash to b156 all is ok except wifi. i cant turn it on, on wireless manager. i also tried to flash it back to orig hp wm5 rom but still it doesn't fix the wifi. its like there is no driver loaded. please help.......

[bjkolev]

Maybe your battery's physical condition is bad so that calibration is of no use at all. The cycle means discharging and charging energy equivalent to the ILMD.
Yes, my battery is 1 1/2 year old. Until now I charge the battery before it goes to 50-70% in my car every day. Probably it is not good for the live of that type (Lithium-ion Polymer) battery to charge it, before it goes to 0%.

I have a new one, but i tested your software with my old battery. :-)
8. cycle 1507 / 502 mAh (switched off "powerless" by 10% in 7. cycle)
I started again, without recharging and it shows 0% and the iPAQ rw6815 still works 45 minutes ( I play Casparov Chess and FIFA 2002 that time) :-)). And now the battery is dead, I think. 1/2 h charging and nothing comes on the display.

P.S. Opps. I have problem with the SIM-Card, not the battery. The light is going green, and after that i take out my SIM-Card and everythig was O.K.
9. cycle 1507/ 502 mAh . I think, that this is the real capacity of my battery :-).

10.cycle 1507 / 502 mAh (switched off "powerless" by 3% in 9. cycle)
I do not make more cycles. It is time to re-calibration :-).

[prash0715]

i have rw6828, after i flash to b156 all is ok except wifi. i cant turn it on, on wireless manager. i also tried to flash it back to orig hp wm5 rom but still it doesn't fix the wifi. its like there is no driver loaded. please help.......
mmm ....some problem with ur Device.....1ce try my ROM..if still problem...den ur Device has sm hardware probs

[helloworld1]

i have rw6828, after i flash to b156 all is ok except wifi. i cant turn it on, on wireless manager. i also tried to flash it back to orig hp wm5 rom but still it doesn't fix the wifi. its like there is no driver loaded. please help.......

You flashed the device via PC? Maybe you flashed the wrong wifi radio. You can flash the hp wm5 via PC and update wm6.1 using SD card .

[helloworld1]

Based on 6828's B156.
Without much atomish modification. It looks exactly like HP's including boot screen.
http://www.mediafire.com/?qc3ydomijdy

Note: THIS IS TESTING ROM. IT MAY NOT EVEN BOOT! YOU SHOULD REPORT ANY PROBLEMS AND I WILL FIX IT IN THE NEXT TESTING ROM.

[naset]

its been a long time im not here.is there any news for rw6828 rom,helloworld1?

[killswitch28]

You flashed the device via PC? Maybe you flashed the wrong wifi radio. You can flash the hp wm5 via PC and update wm6.1 using SD card .

yes i flashed the device via pc. i also flashed it back to wm5 via pc. but in wm5 its still the same no wifi. on hp asset viewer i found this [+] wireless lan
driver rev: N/A
Firmware rev: N/A
Hardware rev: 1.0
..
Radio Present: Yes

please help helloworld1, i used the hp official rom to flash it back to wm5, but no good still the same problem. right now im still on b156, coz its stable and clean but my wifi is gone. can you help me............

[killswitch28]

mmm ....some problem with ur Device.....1ce try my ROM..if still problem...den ur Device has sm hardware probs

thanks for reply, but i think there is no problem in my device in terms of hardware. all i done is flash it using b156 via pc, and then there it is no wifi, cant turn it on. ill try your rom and give you a feedback if it fix the problem.

[prash0715]

thanks for reply, but i think there is no problem in my device in terms of hardware. all i done is flash it using b156 via pc, and then there it is no wifi, cant turn it on. ill try your rom and give you a feedback if it fix the problem.
okieee:):)

[helloworld1]

its been a long time im not here.is there any news for rw6828 rom,helloworld1?

A few days are long time for you but quite short time for me. I haven't made any new recently because I am busy writing some reports.
You know, from my updating history, I may stop updating for a long time and start releasing several updates in a short time.
I will support my ROMs until at least my 6828 corrupts.

[helloworld1]

yes i flashed the device via pc. i also flashed it back to wm5 via pc. but in wm5 its still the same no wifi. on hp asset viewer i found this [+] wireless lan
driver rev: N/A
Firmware rev: N/A
Hardware rev: 1.0
..
Radio Present: Yes

please help helloworld1, i used the hp official rom to flash it back to wm5, but no good still the same problem. right now im still on b156, coz its stable and clean but my wifi is gone. can you help me............

You are using the official one with patched RUU to flash back, right?
You can go to "self test" and do the WLAN Module Test.

[naset]

@helloworld1
yea,i also will use my 6828 until it corrupt. :) keep it up helloworld1. :)

[killswitch28]

You are using the official one with patched RUU to flash back, right?
You can go to "self test" and do the WLAN Module Test.

yes im using the patched RUU to flash back. it shows "adapter info false" but sometimes it shows a mac address. but i cant turn it on on wireless manager. on asset viewer shows driver rev: N/A Firmware rev: N/A Hardware rev: 1.0 it looks like no drivers are been loaded

[andrechua]

Diamond is my dream device.


I'm saving up for the touch pro instead! ... gonna cost a BOM ... but it's gonna be sweet ... just to stick it iPhone fans at my workplace! :D

[kusanagi]

The old model of Diamond without a contract in China is 4000 RMB (~600 AUD,580USD). But there is no WCDMA in China, so 3G is quite useless. VGA screen is great. I wonder why the power consumption is small in diamond. It should consume more power than 6828. Also I once had a Palm Tungsten T3 which has 900 mah battery but offer me only 6 hour power.

The whole reason for me to get the Diamond is it's 3G and my corporate unlimited data plan, I can tether my Macbook while I'm out and about, or use my wife's Eeepc 1000H when going interstate.

Yeah, AUD$600 is very cheap, but I do need local warranty, you never know what's gonna happen...

I believe the power consumption is small due to it has power efficient cpu, radio chips, circuit design etc?

I still remember the very 1st gen "mobile" phone which has the size of a car battery from Motorola... and that only last half a day of stand by.

There's also some Phillips mobile phones that their battery last more than a month!!

K

[kusanagi]

I'm saving up for the touch pro instead! ... gonna cost a BOM ... but it's gonna be sweet ... just to stick it iPhone fans at my workplace! :D

Indeed the pro is king of all winmo right now... be nice if they can make it the same thickness of the Diamond... :)

K

[naset]

only me waiting for SE Xperia huh?lol

[helloworld1]

Indeed the pro is king of all winmo right now... be nice if they can make it the same thickness of the Diamond... :)

K

A little off topic:
Openmoko device may be my next choice:
http://wiki.openmoko.org/wiki/Neo_FreeRunner
In the description, there is this sentence:
"As the hacker's dream toy: it is fully functional."
Haha, just a toy, not a phone!
Maybe I will buy a cheap blackberry device as my spare if my 6828 breaks.

[hochengsoon]

A few days are long time for you but quite short time for me. I haven't made any new recently because I am busy writing some reports.
You know, from my updating history, I may stop updating for a long time and start releasing several updates in a short time.
I will support my ROMs until at least my 6828 corrupts.

Hope yours last longer than mine or I change before yours died.

[naset]

openmoko is the best choice for linux freaks.i also consider to buy openmoko phone. :)

[killswitch28]

anyone please help.........wifi problem, helloworld1 when i run self test for wlan it shows "DETECTED" MAC addr: 02 b3 92 a8 c4 but i cant turn it on on wireless manager. help please......am i missing something???

[kusanagi]

openmoko is the best choice for linux freaks.i also consider to buy openmoko phone. :)

So are you inferring yourself and Helloworld as freaks? :D

I guess we are all freaks here at XDA :eek:

K

[ogel2]

anyone please help.........wifi problem, helloworld1 when i run self test for wlan it shows "DETECTED" MAC addr: 02 b3 92 a8 c4 but i cant turn it on on wireless manager. help please......am i missing something???
Already tried resetting the device?

[helloworld1]

anyone please help.........wifi problem, helloworld1 when i run self test for wlan it shows "DETECTED" MAC addr: 02 b3 92 a8 c4 but i cant turn it on on wireless manager. help please......am i missing something???

Can settings->connection->wi-fi utility, menu->turn on.

[killswitch28]

Already tried resetting the device?

Dude i also tried it even hardreset.....

[killswitch28]

Can settings->connection->wi-fi utility, menu->turn on.

It wont turn on. even on wifi utility......

[ogel2]

Dude i also tried it even hardreset.....
i think your extended rom is corrupted, maybe you should back to wm5 first. then try to flash wm6.1 again

[naset]

So are you inferring yourself and Helloworld as freaks? :D

I guess we are all freaks here at XDA :eek:

K
lol.yeah,you're rite.everyone here is a freak.freak at gadget,modding and tech.:D

[helloworld1]

So are you inferring yourself and Helloworld as freaks? :D

I guess we are all freaks here at XDA :eek:

K

There are 10 kind of freaks here:
one is freaky developers and one is freaky users.

[helloworld1]

It wont turn on. even on wifi utility......

When you flash back to WM5, the wi-fi is still not working.
Did you delete anything when flashing back? I mean eboot.nbf and other nbf files?
There are two possibility of this problem: one is hardware, the other one is firmware.

[hochengsoon]

It wont turn on. even on wifi utility......

Try this WM5 ftp://ftp.hp.com/pub/softpaq/sp34001-34500/sp34053.exe

[killswitch28]

i think your extended rom is corrupted, maybe you should back to wm5 first. then try to flash wm6.1 again

Thanks dude. but i already done that. still not working

[killswitch28]

When you flash back to WM5, the wi-fi is still not working.
Did you delete anything when flashing back? I mean eboot.nbf and other nbf files?
There are two possibility of this problem: one is hardware, the other one is firmware.

yes i delete the eboot.nbf coz i dont want to turn my pbl to be 1.0.5, i have a pbl 1.0.1 is there any effect on it? also the minisd flash method is not working on my device. so i only flash via pc

[killswitch28]

Try this WM5 ftp://ftp.hp.com/pub/softpaq/sp34001-34500/sp34053.exe

Thanks hochengsoon ill try this one

[hochengsoon]

Thanks hochengsoon ill try this one

Good Luck, let me know if you need anything else. I came up with the steps after doing much trial & error (posted in 2nd thread).

[killswitch28]

Good Luck, let me know if you need anything else. I came up with the steps after doing much trial & error (posted in 2nd thread).

If i flash in this rom do need not to delete the eboot.nbf? coz i always delete it. so my pbl wont change into 1.0.5

[hochengsoon]

If i flash in this rom do need not to delete the eboot.nbf? coz i always delete it. so my pbl wont change into 1.0.5

Just as it is (it comes with 1.0.1 Bootloader).
iPAQ WAN Component = 0.15
Pocket PC 2005 = 1.00.03
Bootloader = 1.0.1
iPAQ WAN Bootloader = 257.0119

After sp34053, I flashed with sp38094 without eboot.nbf. sp38904 comes with 1.0.5 bootloader which is not what we want for flashing via PC. End result.
iPAQ WAN Component = 0.34
Pocket PC 2005 = 1.01.03
Bootloader = 1.0.1
iPAQ WAN Bootloader = 259.0119

[hochengsoon]

Just as it is (it comes with 1.0.1 Bootloader).
iPAQ WAN Component = 0.15
Pocket PC 2005 = 1.00.03
Bootloader = 1.0.1
iPAQ WAN Bootloader = 257.0119

After sp34053, I flashed with sp38094 without eboot.nbf. sp38904 comes with 1.0.5 bootloader which is not what we want for flashing via PC. End result.
iPAQ WAN Component = 0.34
Pocket PC 2005 = 1.01.03
Bootloader = 1.0.1
iPAQ WAN Bootloader = 259.0119

I'm compiling a package which combine both & uploading to MediaFire soon. Let you know the link once done.

[killswitch28]

I'm compiling a package which combine both & uploading to MediaFire soon. Let you know the link once done.

i just flashed it to wm5 using sp34053, on wireless manager the wifi is completely gone. is this ok? where can i download the sp38094?

[hochengsoon]

i just flashed it to wm5 using sp34053, on wireless manager the wifi is completely gone. is this ok? where can i download the sp38094?

I didn't check after flashing back last time. Flashed for the sack of getting WM5 with BL1.0.1.

Link for sp38904 http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=US&swItem=hh-56563-1&prodTypeId=215348&prodSeriesId=1839223

[hochengsoon]

I'm compiling a package which combine both & uploading to MediaFire soon. Let you know the link once done.

Try this http://www.mediafire.com/7mmmaucpvna before flashing with WM6.1

[killswitch28]

Try this http://www.mediafire.com/7mmmaucpvna before flashing with WM6.1

dude have you encounter this same problem before on your device? thanks for helping dude ill let you know if its fix the problem. btw the link is not working error in mediafire "file or directory not found"

[hochengsoon]

dude have you encounter this same problem before on your device? thanks for helping dude ill let you know if its fix the problem. btw the link is not working error in mediafire "file or directory not found"

Opps, it's http://www.mediafire.com/?7mmmaucpvna. No I never did but using this method I didn't lose my WiFi unless yours is broken along the way flashing. Fingers crossed.

[killswitch28]

Opps, it's http://www.mediafire.com/?7mmmaucpvna. No I never did but using this method I didn't lose my WiFi unless yours is broken along the way flashing. Fingers crossed.

hehehe i hope its not.......

[killswitch28]

Just as it is (it comes with 1.0.1 Bootloader).
iPAQ WAN Component = 0.15
Pocket PC 2005 = 1.00.03
Bootloader = 1.0.1
iPAQ WAN Bootloader = 257.0119

After sp34053, I flashed with sp38094 without eboot.nbf. sp38904 comes with 1.0.5 bootloader which is not what we want for flashing via PC. End result.
iPAQ WAN Component = 0.34
Pocket PC 2005 = 1.01.03
Bootloader = 1.0.1
iPAQ WAN Bootloader = 259.0119

Dude after i flash using sp38094 the result is ipaq wan component 0.34
pocket pc 2005 1.01.03 ipaq wan bootloader 256.0119, not 259.0119 im i missing something?

[killswitch28]

Opps, it's http://www.mediafire.com/?7mmmaucpvna. No I never did but using this method I didn't lose my WiFi unless yours is broken along the way flashing. Fingers crossed.

I test the wifi in wm5 sp38094 the result of wlan self test "GetAdapterInfo() return FALSE..." on wm6.1 helloworld1 rom b156 i can get a mac address but cant turn on the wifi

[ogel2]

@helloworld1 : i see you have release rom for atom beta 2 :)

gonna try it tonight...

[archat68]

Does these ROMs increase the ring volume of 6828 compared to original WM5?
If not, is there any way to increase ring volume of 6828?

TIA

[helloworld1]

Does these ROMs increase the ring volume of 6828 compared to original WM5?
If not, is there any way to increase ring volume of 6828?

TIA

Install SRS WOW HD, the volume will be increased.

[hochengsoon]

Dude after i flash using sp38094 the result is ipaq wan component 0.34
pocket pc 2005 1.01.03 ipaq wan bootloader 256.0119, not 259.0119 im i missing something?

sp38094 comes from HP website. From what I downloaded before it was 259.0119. Does your WiFi works after flashing with it?

[hochengsoon]

I test the wifi in wm5 sp38094 the result of wlan self test "GetAdapterInfo() return FALSE..." on wm6.1 helloworld1 rom b156 i can get a mac address but cant turn on the wifi

I didn't do any WiFi testing after flashing with spXXXXX or the combo that I package from MediaFire. Did for the purpose of getting the latest radio, 0.34 before flashing with helloworld1 ROMs

[killswitch28]

I didn't do any WiFi testing after flashing with spXXXXX or the combo that I package from MediaFire. Did for the purpose of getting the latest radio, 0.34 before flashing with helloworld1 ROMs

No good, wifi still not functioning after flashing to wm5 sp38094.

[hochengsoon]

No good, wifi still not functioning after flashing to wm5 sp38094.

What about MediaFire download (http://www.mediafire.com/?7mmmaucpvna), test WiFi, helloworld1 ROM, test. If still dun work, bad news. Good Luck.

[1ucio]

Install SRS WOW HD, the volume will be increased.

Hi Bro,

Can advise which is the correct version to install? I'm using your b142 rom.

i did a search and download from the source below but it caused the device to screen to hang although the sound did increase. .

http://forum.xda-developers.com/showthread.php?t=355913

[helloworld1]

Hi Bro,

Can advise which is the correct version to install? I'm using your b142 rom.

i did a search and download from the source below but it caused the device to screen to hang although the sound did increase. .

http://forum.xda-developers.com/showthread.php?t=355913

I uploaded it on my mediafire sharing folder. You can download there. The link is in the second thread of this post.

[helloworld1]

No good, wifi still not functioning after flashing to wm5 sp38094.

I smell something like hardware broken. Sorry I can not help.

[helloworld1]

@helloworld1 : i see you have release rom for atom beta 2 :)

gonna try it tonight...

Good I need more testers of release 2 beta roms.

[killswitch28]

What about MediaFire download (http://www.mediafire.com/?7mmmaucpvna), test WiFi, helloworld1 ROM, test. If still dun work, bad news. Good Luck.

Hey Dude its working now thanks to you man! but sometimes its not working, need to softreset. but still better than nothing. thanks a lot hochengsoon

[killswitch28]

I smell something like hardware broken. Sorry I can not help.

No its ok now. wifi working after flashing on the link given by hochengsoon, tonight im goin to flash to b156 again. BTW is there any update next to b156?

[helloworld1]

No its ok now. wifi working after flashing on the link given by hochengsoon, tonight im goin to flash to b156 again. BTW is there any update next to b156?

Glad to hear that.
Subsequent update is not ready. I will keep an eye on the posts and find out some ideas of next update.

EDIT:
The Samsung I908 has a ROM with XIP&SYS 20721 and the system is AKU 1.4.0. I think I will try to port this.
The major update of AKU 1.4.0 is "Microsoft Touch" and IE8.11. However It will break compatibility of many softwares and has a lot of problems. I will try to port this one as a testing release if everything goes well. If not I will silently discard this one.

[killswitch28]

Glad to hear that.
Subsequent update is not ready. I will keep an eye on the posts and find out some ideas of next update.

EDIT:
The Samsung I908 has a ROM with XIP&SYS 20721 and the system is AKU 1.4.0. I think I will try to port this.
The major update of AKU 1.4.0 is "Microsoft Touch" and IE8.11. However It will break compatibility of many softwares and has a lot of problems. I will try to port this one as a testing release if everything goes well. If not I will silently discard this one.

ok ill wait for that. glad to be a beta tester. on my past weeks of using b156 i found some few bugs when creating an sms on contact popup there is some duplicated entries. and on the camera when activated the backlight is brighter than normal. and on auto config. gprs sometimes cant connect

[helloworld1]

i found some few bugs when creating an sms on contact popup there is some duplicated entries.

A: Do you have contacts in SIM Card and what exactly the problem is?

and on the camera when activated the backlight is brighter than normal.

A: You can enable "power saving" in the camera settings.

and on auto config. gprs sometimes cant connect

A: Do you mean that you uses autoconfig to configure the network and the GPRS can not connect sometimes.
I think it is normal because of the unstability of the your operator's network. I encounter this problem very often even on old WM5.

[hochengsoon]

Hey Dude its working now thanks to you man! but sometimes its not working, need to softreset. but still better than nothing. thanks a lot hochengsoon

Glad to be of help. :cool:

[killswitch28]

i found some few bugs when creating an sms on contact popup there is some duplicated entries.

A: Do you have contacts in SIM Card and what exactly the problem is?

and on the camera when activated the backlight is brighter than normal.

A: You can enable "power saving" in the camera settings.

and on auto config. gprs sometimes cant connect

A: Do you mean that you uses autoconfig to configure the network and the GPRS can not connect sometimes.
I think it is normal because of the unstability of the your operator's network. I encounter this problem very often even on old WM5.

no i dont have contacts in simcard, its just when im typing in "to:" dialog box, the popup menu in keyboard shows some duplicated names, but when i view the names in Contacts to check if its duplicated or not. there is only one entry

[helloworld1]

no i dont have contacts in simcard, its just when im typing in "to:" dialog box, the popup menu in keyboard shows some duplicated names, but when i view the names in Contacts to check if its duplicated or not. there is only one entry

People who have more than one phone number are classified as different people.

[seanneko]

Hi,

My Atom freezes and needs to be soft reset whenever I press one of the buttons on the right side of the phone (camera and whatever the one next to it is) using the new release 2 ROM.

[helloworld1]

Hi,

My Atom freezes and needs to be soft reset whenever I press one of the buttons on the right side of the phone (camera and whatever the one next to it is) using the new release 2 ROM.

You need to flash the extrom in the second thread.

[1ucio]

I uploaded it on my mediafire sharing folder. You can download there. The link is in the second thread of this post.

Found it and downloaded . Thanks!!

Realised the sound did increased when i watch movie using the WMP.. but volume seems to remain the same for ringtone.. is this normal or ?

[seanneko]

You need to flash the extrom in the second thread.

I've just re-downloaded the extended ROM and flashed it again a second time, and it's still freezing when I press one of the buttons :(

[helloworld1]

I've just re-downloaded the extended ROM and flashed it again a second time, and it's still freezing when I press one of the buttons :(

It may be a bug.
More testers are needed.
Does camera work?

[naset]

why my a-data 4gb sdhc not working?

it is micro sd with mini sd adapter, class 6 and fat32 format.

i try installing sdhc patch,but still not working.

i try reformat again,also not works.

in my friends atom exec also didnt work.

can anybody here help me plz?

btw,the card read well in my pc using sd adapter.

[seanneko]

It may be a bug.
More testers are needed.
Does camera work?

Yes, the camera works if I manually launch it from the programs menu - it only does this when pressing the hardware button to launch it.

[helloworld1]

Yes, the camera works if I manually launch it from the programs menu - it only does this when pressing the hardware button to launch it.

Can you manually setup the button?

[naset]

problem solved.my mini sd adapter was broken.LOL.
now i got a new adapter and it works!

4gb micro-sdhc with mini sdhc adapter works in helloworld1 b156 rom.i juz wanna clarify this to evryone. :)

[prash0715]

problem solved.my mini sd adapter was broken.LOL.
now i got a new adapter and it works!

4gb micro-sdhc with mini sdhc adapter works in helloworld1 b156 rom.i juz wanna clarify this to evryone. :)
hehehehe yeahh!! clarified[:P]

[seanneko]

Can you manually setup the button?

Even if I change the button to some other program like 'contacts', it still freezes when pressing it.

[kusanagi]

problem solved.my mini sd adapter was broken.LOL.
now i got a new adapter and it works!

4gb micro-sdhc with mini sdhc adapter works in helloworld1 b156 rom.i juz wanna clarify this to evryone. :)

Just FYI. 8GB sdhc microS+miniSD adaptor was reported working before.

K

[naset]

Just FYI. 8GB sdhc microS+miniSD adaptor was reported working before.

K

thx K for the info.i should buy 8gb tho.:D

[helloworld1]

Even if I change the button to some other program like 'contacts', it still freezes when pressing it.

More Testers needed!
Anyone who uses new beta Atom ROM encounter this problem?

[sinva]

More Testers needed!
Anyone who uses new beta Atom ROM encounter this problem?


Yes. The same problem. Any key pressed on the right side and my Atom freezes.

[helloworld1]

Yes. The same problem. Any key pressed on the right side and my Atom freezes.

Ok I will investigate the problem.

[prash0715]

Ok I will investigate the problem.
dude wen did u get ATOM....device

[ogel2]

Ok I will investigate the problem.
same here, it freeze when i push camera button.....

[ogel2]

More Testers needed!
Anyone who uses new beta Atom ROM encounter this problem?
well, i don't know what i've done to my atom device, but it seems your first release of atom appears more stable now.....

no camera flickering, working wifi, i'll report the result of battery drain soon.....

[helloworld1]

well, i don't know what i've done to my atom device, but it seems your first release of atom appears more stable now.....

no camera flickering, working wifi, i'll report the result of battery drain soon.....

The second version have yet released. It is just a beta. The first version is of course more stable.
The first release is done after 10 betas!

[ogel2]

The second version have yet released. It is just a beta. The first version is of course more stable.
The first release is done after 10 betas!
when i was trying your 1st release, there's a few bugs such as flickering camera, corrupted icon, and sometimes wi-fi didn't work.

then i tested your latest beta 2, freeze on camera shortcut,after that, i return back to your 1st release.

and suddenly those problems are gone.

[helloworld1]

when i was trying your 1st release, there's a few bugs such as flickering camera, corrupted icon, and sometimes wi-fi didn't work.

then i tested your latest beta 2, freeze on camera shortcut,after that, i return back to your 1st release.

and suddenly those problems are gone.

Corrupted icons?
What is this problem?

[ogel2]

Corrupted icons?
What is this problem?
the icons in program tabs was miserable. doing soft reset will fix this and after a few time of use, suddenly the icon was showed miserable again :(

thank god, there's no such problem right now. your first release seems stable for me.

nice work, helloworld1 ;)

[helloworld1]

I have made a fix to the button problem. But I failed to upload through mediafire.
I will release once I can upload it for people to test.

[ogel2]

i'll be waiting dude :)

[helloworld1]

Mediafire is not working these days.
If anyone one want updated atom testing ROM, please PM me.

[ogel2]

Mediafire is not working these days.
If anyone one want updated atom testing ROM, please PM me.
Seems that mediafire doing something with their storage. I can't download from them either.

[prash0715]

Seems that mediafire doing something with their storage. I can't download from them either.
hey mediafirez is working good....huh am nt getin ny problem itz may d problem with d server in ur country....
may b its in maintense........ll b back soo dun wory,,,,!!!

[ogel2]

ok, atom release2-b2 already on mediafire server. let's wait mr.helloworld1 to update #1 post on this thread.

@helloworld1 : sorry dude, i won't post the link because you're the one who suppose to do it. you're the author. :)

[helloworld1]

ok, atom release2-b2 already on mediafire server. let's wait mr.helloworld1 to update #1 post on this thread.

@helloworld1 : sorry dude, i won't post the link because you're the one who suppose to do it. you're the author. :)

I have updated the first thread. The beta version will be updated reapidly. So I think it is not worthy to make it public, it is annoying to someone.

[prash0715]

I have updated the first thread. The beta version will be updated reapidly. So I think it is not worthy to make it public, it is annoying to someone.
dude :(:( badd newz.....
ai lost my iPAQ :(:(
gone ferever......

[helloworld1]

dude :(:( badd newz.....
ai lost my iPAQ :(:(
gone ferever......

I am sorry to hear that. I hope it will magically return to you soon.

[prash0715]

I am sorry to hear that. I hope it will magically return to you soon.
:(aii was drunk sm1 flicked it.:(aii wun get it back!! fereva

[JapanLover]

Do you guys think it is possible to restore a full backup done with SPB Backup from a b95 rom after upgrading to b156?

Moreover.. I checked my device info and found that I installed the 6828 b95 to my 6815.. so I wonder the only difference between 6828 and 6815 is the FM Radio?

[helloworld1]

Do you guys think it is possible to restore a full backup done with SPB Backup from a b95 rom after upgrading to b156?

Moreover.. I checked my device info and found that I installed the 6828 b95 to my 6815.. so I wonder the only difference between 6828 and 6815 is the FM Radio?

No you cannot. There is a 6815 version of b156 ROM in the second thread.
The camera is a little different.

[JapanLover]

No you cannot. There is a 6815 version of b156 ROM in the second thread.
The camera is a little different.

as usual kind and helpful: Thank you helloworld!

I saw the link you mean.. it's 6815 r2 (camera patch may work) right?
Just one more question (more a curiosity about WM6.1): why the hell in the keyboard Microsoft removed the CAPS LOCK?????? :D

Thank you mate!!

[kedarchitale]

as usual kind and helpful: Thank you helloworld!

I saw the link you mean.. it's 6815 r2 (camera patch may work) right?
Just one more question (more a curiosity about WM6.1): why the hell in the keyboard Microsoft removed the CAPS LOCK?????? :D

Thank you mate!!
for caps lock - press the "shift button" twice quickly. it will work as caps lock.

[q_ware]

hi helloworld1, are you going to make a 207xx version for 6828?
thx

keep up the good work :)

[kedarchitale]

hi helloworld1, thanks for the excellent clean and stable rom versions:). you have reincarnated the ipaq 68x8 models:cool:. i am currently using the b155 and its excellent except for the power drain. i was wondering whether it would make sense to retrofit the bug fixes to b95 version:confused:. meaning that take b95 as base and fix the new task issue, remove voice commander, add net 3.5. i am not sure whether there is a SYS or AKU change between 95 and 155, but feel that since b95 was the version with least power consumption, it would be worth to retrofit the other bug fixes (from b155) to b95.

once again thank you for the excellent rom:cool:

[helloworld1]

as usual kind and helpful: Thank you helloworld!

I saw the link you mean.. it's 6815 r2 (camera patch may work) right?
Just one more question (more a curiosity about WM6.1): why the hell in the keyboard Microsoft removed the CAPS LOCK?????? :D

Thank you mate!!

M$ haven't removed CAPS! Settings->Input->Small Keys!

[helloworld1]

hi helloworld1, are you going to make a 207xx version for 6828?
thx

keep up the good work :)

I have made a 20721 based ROM. But It is VERY VERY UNSTABLE!
Also, I have found the "microsoft touch" will interfere many normal functions and the system is not fast.

20748? Forget it. The only benefit is Flash Lite 3.1, which can be manually installed now. The IE is as slow as ....emmmmmmmmm... mountain!

The most stable 20xxx ROM is 20273. But I won't port this one. It is not very beneficial.

[helloworld1]

hi helloworld1, thanks for the excellent clean and stable rom versions:). you have reincarnated the ipaq 68x8 models:cool:. i am currently using the b155 and its excellent except for the power drain. i was wondering whether it would make sense to retrofit the bug fixes to b95 version:confused:. meaning that take b95 as base and fix the new task issue, remove voice commander, add net 3.5. i am not sure whether there is a SYS or AKU change between 95 and 155, but feel that since b95 was the version with least power consumption, it would be worth to retrofit the other bug fixes (from b155) to b95.

once again thank you for the excellent rom:cool:

b110 is based on the base of b95. But the task issue is tough for this base. You can input new task on the top inputbar.

I found the power consumption of b95 and b142+ is comparable.
b142+ is a little faster.
b39 is the most power conservative one.

[kedarchitale]

b110 is based on the base of b95. But the task issue is tough for this base. You can input new task on the top inputbar.

I found the power consumption of b95 and b142+ is comparable.
b142+ is a little faster.
b39 is the most power conservative one.
thanks for the quick reply. i have never used b39, however had only read in this thread that it uses lesser power. between b95, b110, b142 and b155, i found b95 to be better in terms of power consumption. I havent done any rigourous tests, but just going by imperical values.

[ogel2]

I have made a 20721 based ROM. But It is VERY VERY UNSTABLE!
Also, I have found the "microsoft touch" will interfere many normal functions and the system is not fast.

20748? Forget it. The only benefit is Flash Lite 3.1, which can be manually installed now. The IE is as slow as ....emmmmmmmmm... mountain!

The most stable 20xxx ROM is 20273. But I won't port this one. It is not very beneficial.
still no news about your atom development, mate? ;)

[prash0715]

still no news about your atom development, mate? ;)
u hav to wait mate its not.....a toy to build fast..!!

[hochengsoon]

:(aii was drunk sm1 flicked it.:(aii wun get it back!! fereva

Guess it's sooner than later for you to get a new device. What would it be?

[prash0715]

Guess it's sooner than later for you to get a new device. What would it be?
:(if plp send me funds.....aii can get 1..
1 member is ready to send me funds!!

[ogel2]

u hav to wait mate its not.....a toy to build fast..!!
i know that, i wish i can cooked myself.....

:D

[archat68]

Can anyone help me about how to backup installed applications and other data before I upgrade to WM6 so that I can restore all the installed programs afterwards?

Is it posiible at all?

[ogel2]

Can anyone help me about how to backup installed applications and other data before I upgrade to WM6 so that I can restore all the installed programs afterwards?

Is it posiible at all?
maybe you can try using Spb Backup...

[archat68]

Can SPB backup be used for backup of installed application?
I mean if I backup and upgrade to WM6 and then restore the backup - will all the installed apps restored?

[prash0715]

Can SPB backup be used for backup of installed application?
I mean if I backup and upgrade to WM6 and then restore the backup - will all the installed apps restored?
yip yuu can use..............
but aii recommend yuu to use....
jeyo mobile companion..!!!

[atef4ever]

hi helloworld..
can i use ur rom on my 6815?