Error 270

[Blade Hunter]

Hi everyone!

I've got a big problem. I Flashed my 3600 (Swisscom version XPA v1510) with Karmba's WM6 in en. 3 Days later i want to flash a ger version. then it has a failure. since then, ever when i want to flash something (wm5, HTC wm6 lit, bepe etc. cid unlock crashproof spl etc.) it goes to 1% or by cid to 7% then my trinity goes black screen, i hear the "usb connection lost" sound on my pc and the RUU says error 270 update error, the image file is corrupt. i loaded down the files several times, on my loc. HD, ext HD, SD card... nothing works. when i turn on my phon normally, the htc screen appears wit a swisscom label at the bottom, with some numbers and then... nothing. i can't do anything. i only can start it in bootlader mod with a key combination... i need my phone, so i need help please! :P i've seen, when i put in my mini sd and start the bootloader, before the 3 color screen appears, it says "loading" can i eventually flash from the card? i'm really despaired... plz help!

tnx and greetz!

[chalid]

just had the same problem on my trinity. rom upgrade wouldnt go further than 1%, giving me an error 270 on the flashtool on windows after this one percent.

try: splxploit (use forums search).

go into boot loader (camera + power on), close wescomm (or something like that) and rapimgr on windows via taskmanager and start unbrick.bat. after that flash "Hard-SPL". and after that use the rom you like ...

worked for me. good luck.

[Blade Hunter]

what u described, i tryed several times. it never works, in 25 tryis the xploit worked 2 times. after that the hard spl goes to 2 or 7 % and then the same... but now i've tryed what u said, with deactivate this 2 fucking tasks ^^ and look there, it worked! tnx very much! before, i loaded every file from this ftp server wich might help, but there were only 2 tasks... :P thanks again and have an nice evening! greetz

[chalid]

hehe, glad to hear ... :cool:

btw. the problem occurred to me too, when flashing form an english version to a german one. at first it flashed to 20% or so and then disconnected - dropping the phone back to the colored bootloaderscreen. the flashing tool wanted me to follow some steps, which i did, and tried to flash the phone again. and there this 1% disconnect started to happen each time i wanted to flash - independent of the rom i used. after following the steps mentioned above the whole process worked fine again.

[corfou]

Error 270 mean bootloader must be updated.
Search for hard spl on wiki

[superking]

bootloader? i can update nothing, block at 1% image update. I have the same Version like Blade Hunter, HSPL-1.07.0000
But now i cannot update mit Oli's Hard-SPL, same error. I make it over XP with the automatic installation of Hard-SPL.
Somebody nows an other update methode how works. At the moment i can do nothing with my mobile, like Blade Hunter.

[superking]

ok, works again after flash with splxploit:

http://forum.xda-developers.com/showthread.php?t=308691

The basic Probleme was the old version of Hard-SPL: TRIN100
SPL-1.07.0000

[flaneur]

Hi guys!

I had the exact same problem Blade Hunter described (also with with Karmba's WM6)!:mad::mad: I was able to solve the proble by killing the 2 windows tasks that control de usb/activesyn (wcescom & rapiXXX) and using the unbrick tool!

I have successfully unbricked my trinity and flashed a new rom. :D

Great pda, great xda-dev community! :rolleyes:

Flaneur

[edmaronline]

I have the same problem with my Touch. I am trying to install the following
[WM 6.1] NEW BLUE ELVES ROM V5.0 - CE OS 5.2.2021 (BUILD 19521.1.1.0) (8MB PAGEPOOL)

When The device gets the 3% it shows the following message:
Image FIle is Corrupted. PLease check your update utility.

Anyone could please help me? My device is a HTC Touch with 128/256MB. Thanks for all!

[markomarko81]

just had the same problem on my trinity. Rom upgrade wouldnt go further than 1%, giving me an error 270 on the flashtool on windows after this one percent.

Try: Splxploit (use forums search).

Go into boot loader (camera + power on), close wescomm (or something like that) and rapimgr on windows via taskmanager and start unbrick.bat. After that flash "hard-spl". And after that use the rom you like ...

Worked for me. Good luck.



good bles you

[jetway72]

what u described, i tryed several times. it never works, in 25 tryis the xploit worked 2 times. after that the hard spl goes to 2 or 7 % and then the same... but now i've tryed what u said, with deactivate this 2 fucking tasks ^^ and look there, it worked! tnx very much! before, i loaded every file from this ftp server wich might help, but there were only 2 tasks... :P thanks again and have an nice evening! greetz

sorry can you describe the exact passage and how you have resolved? i am in the same situation of your girst post...but not understand how to resolve..i ve try to kill the two task, and splxplit work fine and flash the hardspl 1.20 but when i try to flash original rom from PC with windows XP.. it start and load to 13% and stop (not reboot, not errore message) nothing.... if i try to flash only a radio rom it load to 7% and reboot with error message 270 image corrupt..

i am very disperate....
helpppppp!!!!!!



regards

[mrdl2008]

I have the same problem but on my SHadow. I can' t do anything. Help me.

[MIKO3773]

I have the problem,too.
When i run unbrick.bat I Get that picture.
How can I resolve problem?
http://www4.slikomat.com/09/0610/wpl-Captur.jpg

[FaCeOff]

Hi,
had the same problem and with the help of you guys I could fix it.
Just for everyone who could not fix it a short summary:

1. To be sure, do all the stuff on a Windows XP machine
2. DISABLE "Allow USB Connection" in Active Sync so you see a small red X symbol next to the Active Sync symbol
3. Start the device into Bootloader mode (Cam+Power+Reset) and connect the device to your PC and make sure USB is written on the bottom of your screen (NOT Serial!)
4. Download splxploit (http://forum.xda-developers.com/attachment.php?attachmentid=39770&d=1180043588) and execute unlock on your PC
5. Follow the instructions
6. Download HardSPL (http://forum.xda-developers.com/attachment.php?attachmentid=45018&d=1185364317) and follow the instructions
7. Finally (to be sure) restart into Bootloader mode and check if SPL is showing "SPL-1.30.Olipro) - if this is the case you've done it !
8. Flash your preferred ROM via miniSD or USB connection

Hopefully this should be clear to everyone

Cheers

[a_gus18]

Try using/buy better USB cable. Cable with Ferrite core is recommended. Happened to me once.

Hope thet help.

[Bluetone1976]

FACEOFF!

Thanks a lot ... you saved my day!

[tatalulamoo]

Chalid,

Hey man, Thanks for this info! I have been pulling my hair out over this phone for ages, finally the info you've given has been the breakthrough I needed! God bless!!