How to Unlock Vogue CDMA

[km230580]

Buy HTC Vogue Clean ESN CDMA Set to eaby.com . & how to Use This Phone In India in CDMA Network. pls tell

I m read another Indian forum. HTC 6800/6900 convert to tata CDMA

here is detail


SID, NID, Primay Channer A & B, Secondary Channel A & B loaded Nam 1 & Nam 2 PRL, SPC = 000000

I got all above Parameter from Tata Customer Care and they told any Foreign ESN Handset can work if you are able to change the above Parameters, After that I Get an GSK (Getting Started Kit) of Tata which have 14 Digit Activation Number, then Dialed *228 and followed the Instruction, After 2 Hours (Tipical 10 Minutes they say) Received a SMS to Restart the Phone. Voila my HTC Mogul is Working on TATA

Will load my QPST .qct file (Ready made Setting for TATA) so every buddy can easily Activate Mogul on TATA

Everybody now Welcome to World of Tata Indicom

( Attached TATA.rar contains Nam1 PRL, Nam2 PRL, and Ready made QCN file for QPST Service Programming, also have GetSPC [ Run in PPC6800 / Mogul Type the ESN in Capital and get the Service Programming Code] )

Pls Help me

[mbote]

Sounds interesting but I'm just wondering

OK.... can u explore more on that.
How does one go about creating/editing the PRL settings contained here if they want to use this thing on a different network than Tata?

thx

[hetaldp]

This method work on Cricket in USA and in TATA in India

Just follow the Process and Activate using *228 Loading TATA Prl is needed or else it will not catch TATA Tower range.

Go on and take it into TATA

I already have activated so many Phones

Both Cricket and TATA accept non Allocated ESN and Activate the OTA and INsert the new ESN against users Services, Here in India Reliance dont activate any phone which ESN is not pre Registered in Reliance Network

[flyhighusa]

I was wondering if this will solve my issue. I have bought a touch with a bad ESN and is unable to put it on my account. Will this clear the ESN?

[LycanNyc]

I used this ..so easy

[storino03]

so if you activated your phone for india service, would you be able to use it in the United States?

--James

[dharvey4651]

I did this for my Sprint Touch. I am still using it in the USA but my phone has been modified to support other carriers with no problem.

The steps are simple:

Here is what you need to do:

1. Download GetSPC(attached below)
2. Unzip to desktop
3. Turn off phone and remove battery.
4. Write down your HEX ESN
5. Power your device back on
6. Connect via ActiveSync or WMDC
7. Copy entire folder to main memory on device.
8. Run GetSPC.exe
9. In the top box type in your HEX ESN(make sure caps is on)
10. Click generate or whatever the button is named
11. The resulting number should be a 6 digit number, your MSL, write it down.
12. Search for, download and install Qualcomm's QPST tool.(not freeware)

THE FOLLOWING STEPS ARE VERY DANGEROUS SO MAKE SURE YOU FOLLOW MY DIRECTIONS EXACTLY.
13. Run QPST Configuration(run as admin if Vista)
14. From the Dialpad, dial ##3424#(##diag#)
15. Connect device to computer via USB(this will install drivers)
16. In QPST Configuration, click ports.
17. Continue to add ports until the QPST Configuration detects your phone
18. Under active phones it should display your phone.
19. Click Start Clients/Service Programming
20. Select phone and click ok.

DO NOT LEAVE FIRST TAB, THE SETTINGS TAB. THIS IS THE ONLY TAB WE WILL NEED TO CHANGE ANY SETTINGS

21. Under the settings tab, click Read from phone.
22. Input your MSL you got from GetSPC earlier.
23. Under codes where it says Service Programming, change this to 000000
24. Click Write to Phone
25. Wait 1 minute
26. Close Qualcomm QPST one window at a time.
27. Disconnect the USB cable from your device
28. Perform Soft reset once
29. Test new MSL(##000000#)
30. If new code does not go through, hard reset.

31. Depending on what device you have, follow the necessary steps to unlock your phone so you can flash a new ROM to it.

32. Install OEM ROM from carrier of choice or build your own custom ROM using the new carrier's information.

33. Follow instructions to flash new OS to device.

34. Call service provider and do some sweet talking to get them to activate the phone on their network. You may need to do some serious sweet talking because Sprint ESNs are not in Verizon's database and vice versa. This goes for all CDMA carriers.

Good luck.

[mbote]

I did this for my Sprint Touch. I am still using it in the USA but my phone has been modified to support other carriers with no carriers.

Good luck.

are u then able to have both NAM1 & NAM2 on the phone?

[cellfreak]

You have to enable dual NAMs through the registry. And use QPST or CDMA Workshop to set them up.

[hetaldp]

Thanks a million time to Shadomite

He had Cracked and changed the ESN

I have POsted the Simplified Method Just have a look

http://www.mobile-files.com/forum/showpost.php?p=355534&postcount=82

[hiroprotagonist]

Quick question. Is there any chance of doing something similar to a Verizon World Edition Blackberry? I live in Ghana and i have had a few of these on my table in the last few months. Any ideas?

[TokTok]

''Originally Posted by dharvey4651''
32. Install OEM ROM from carrier of choice or build your own custom ROM using the new carrier's information.''


What information i need from my carrier to build my own rom and how can i make it. Is there a way to build a rom and make a CDMA phone to work in Europe?

I have an HTC TOUCH CDMA ver in Greece!

Help..

[patelaquib]

you have given the file i have downloaded it but now how to use it and activate on tata can u help me