[ITA] Artemis Bigix 2.0

[bigix1]

Another Rom for Artemis italian user.
This is a new way of install ROM and can be installed ONLY if you have a Micro SD with almost 30 Mb free space.

In Rar archivie there is the nbh file (the Rom) and a file called "Setup".
1. Copy file "Setup" in your SD
2. Flash the rom (remember you must have SPL unlocked).
Don't delete Setup from SD: it's impostant if you make Hard Reset.

Core wm: CE 5.2.1620 (Build 18124.0.4.2) from original HTC WM6 Professional Ita
SplashScreen
SHDC e GPS Photo ready
.........and more.

Italian user can read more on this forums: A1Ktyle (http://www.a1kstyle.com/ptopic17711.html) - SoloArte (http://soloarte.altervista.org/forum/viewtopic.php?f=2&t=69)

LINK DOWNLOAD RAPIDSHARE (http://rapidshare.com/files/86349658/Rom.Artemis.Bigix.2.0.rar.html)

[energy59]

Thanks mate, testing your great work, bye:D:D

[Pincopallino5]

My HTC3300 was dead, only can load into Three-color Mode with USB avaliable. I tried all kind of RUUs, including the Original ROMs(English, French, Deustch....)and the newest version , all report ERROR[300]invalid update tool. then the screen of phone stayed in 0% and RUU tool exit only...

IPL 1.27.0001
SPL 1.11.0000 (used the USPL to unlock CID before)
Before Bricked, I successfully updated many versions of ROM, and the last operation is WM6.1.

I'have try this with MTTY:

Cmd> set 32
Cmd> password BsaD5SeoA
Cmd> ruurun 0
Cmd> ResetDevice

But Doesn't work!

because of you!

My phone was perfect before and I have installed your BigiX.
What I have to do? Can U help me?
I can donete some money... pls... help me....

[bigix1]

My dear friend,this is an old rom.
But this is not the reason of your problem.
I don't know if MTTY works on this device, but if your screen show 3 colors you are in bootloader mode (and your SPL is 1.11.0000 as you tell, so it is good for flash any rom).
So (in teory) you can connect PPC to PC via USB and run RUU for flashing the rom you want.
In alternative you can flash original rom.
For this operation i suggest Win XP+ AS 4.5 and try to change usb cable (a new one) and usb port (another on your PC)
I hope you can resolve.

No need donate money :)

[Pincopallino5]

Thx, but are 3 days that I'm looking for solution... Lot of people have the same problem. When run RUU flashing after 3 colors bar, the phone start to flashing but is stopping at 0% and the software report ERROR[300]invalid update tool.

I can connect only with MTTY but I'm looking fore some command that can force to send RUU at the fone. For example "send" in telnet. But nobody know how to do this...

If someone have an idea, lot of people will be very very very happy!
And hope gratful

[danyfox]

You can try with rom flash from SD card... :D

Are you italian??

You can found all the info in this website -> Clic here!!! (http://soloarte.altervista.org/forum/)

[Pincopallino5]

Yes, I'm Italian.
I'll post this question to that site.

But I think that is possible to force installation of RUU with MTTY.

My problem is that when I have used start_uspl.exe at blank screen was blocked and I have removed battery.
After this my phone is blocked with 3 colors bar and when I try to update, it start but only at 0%

I need to know all MTTY commands

[danyfox]

I don't know if MTTY work with P3300, try with the flash from the SD card directly from the device...

This is the link of the discussion...... Click here!!! (http://soloarte.altervista.org/forum/viewtopic.php?f=14&t=131)

Try don't cost anything.... :eek::eek:

[Pincopallino5]

obviously I have try a lot of times... But doesn't work!
I have try to rename in ARTEIMG.nbh and in a lot of different name but when I powe the phone it say Checking SD contents but nothing happen....

I would like to find a command to force reading of SD and writing to the Phone... but I think is not easy...

Thanks whatever....

[danyfox]

Do you try with another SD card? :confused:
This procedure is the same that the HTC Service use for repair the HTC device...
Try with another SD card... I have a Kingston 2Gbyte and it work very fine!
I hope your Artemis revive very soon! :):o:rolleyes:

[Pincopallino5]

I have only 2 SanDisk SD cards. One of 128Mb and one of 2GB.
I have tryed with both. With Fat16 and Fat32 but nothing happen... :(

[sualc]

Sorry for your problems Pinco, I don't have a solution for that but i can strongly recommend another ROM from the great BigX, the one you can see in my signature. OS core seems to be more recent and ROM's almost perfect:) If you don't have any specific need to use the 2.0, go for Blue-X!

[cafeazz]

what happend any there have solution for this prob:mad: