HTC Manila interface.....did you configured on your device..??

[qtek_metanol]

Hi everybody

looking around to find out what is the status of HTC concerning a probably new drivers release for the devices with Qualcomm 7200 chipset, i've found the file below, which should contain a new User Interface code name MANILA.
I'm sure most of you hear about it.
Well, i've been trying to install the file, but in some way i don't get it, even if I edit the cab and write a new setup.xml. May be because I have the Original O2 ROM on my Orbit 2, i'm not sure at all

Could some of you try if the install works on your cooked HTC Roms ??

Download link:
http://rapidshare.com/files/87504139/manila.1.0.0103.0.release.zip.html

THX in advance

Metanol

[iruja]

Well I can install the file (but can't uninstall it).
Seems to slow down my phone a bit, and it doesn't work.

It does show a plugin on the today screen "Tap here to start HTC Home.".
But it will respond with a "HTC Home is terminated unexpectedly, please tap here to start HTC Home."

What can I say, it looks interesting, but won't run for me.

[NuShrike]

Originally from this (http://htcinsider.blogspot.com/) site maybe?

Some of it has LUA scripts. Break out your World of Warcraft scripting skills now, if LUA is how the UI is going to be configured and used. :)

[corleno]

looks nice but dont work

darn

[petervbeck]

doesn't work on my device (UdK Lizard 6.3). There is also "Tap here to start HTC Home" and then "HTC Home is terminated unexpectedly...".
When i reset, HTC Home is shown before entering my PIN, after it's gone and the "Tap here..." text is there..... and it's true, it's slowing down the device a bit...
damn....looks really cool, hope someone get this working! :rolleyes:

[tripledes]

Hi everybody

looking around to find out what is the status of HTC concerning a probably new drivers release for the devices with Qualcomm 7200 chipset, i've found the file below, which should contain a new User Interface code name MANILA.
I'm sure most of you hear about it.
Well, i've been trying to install the file, but in some way i don't get it, even if I edit the cab and write a new setup.xml. May be because I have the Original O2 ROM on my Orbit 2, i'm not sure at all

Could some of you try if the install works on your cooked HTC Roms ??

Download link:
http://rapidshare.com/files/87504139/manila.1.0.0103.0.release.zip.html

THX in advance

Metanol


It seems similar to PointUI http://www.pointui.com/Home.aspx, haven't tested but claims to work with WM from 2003 to 6. :)

[qtek_metanol]

Well I can install the file (but can't uninstall it).
Seems to slow down my phone a bit, and it doesn't work.

It does show a plugin on the today screen "Tap here to start HTC Home.".
But it will respond with a "HTC Home is terminated unexpectedly, please tap here to start HTC Home."

What can I say, it looks interesting, but won't run for me.

I get the same error Message, when I go to the explorer and try to exexute the manila.exe, it shows a certificate or missing components error. I modify the cab and installed completed on \Windows directory and same error.

[qtek_metanol]

Originally from this (http://htcinsider.blogspot.com/) site maybe?

Some of it has LUA scripts. Break out your World of Warcraft scripting skills now, if LUA is how the UI is going to be configured and used. :)

exactly LUA language is inside, e.g.:

-- Adapted from class function at http://lua-users.org/wiki/SimpleLuaClasses

function __class_ctor(class_tbl, ...)
local obj = {};
setmetatable(obj, class_tbl);
if (class_tbl.__init) then
class_tbl.__init(obj, ...);
else
if class_tbl._base and class_tbl._base.__init then
class_tbl._base.__init(obj, ...);
end
end
return obj;
end

function class(base)
local c = {};
if type(base) == 'table' then
-- Shallow copy of base, including all functions and properties.
for i,v in pairs(base) do
c[i] = v;
end
c._base = base;
end
c.__index = c;

local mt = {};
mt.__call = __class_ctor;
setmetatable(c, mt);
return c;
end

[Vinny75]

I get the same error Message, when I go to the explorer and try to exexute the manila.exe, it shows a certificate or missing components error. I modify the cab and installed completed on \Windows directory and same error.

Did you disable the security certificate requirement in the registry?

[TimSykes]

anyone get it to work?

[TimSykes]

nope did not work for me.

[qtek_metanol]

Did you disable the security certificate requirement in the registry?

I did, my problem now is my own work on the office :D

[xplode]

The problem is in Manila.exe not in scripts and in the today plugin, even properly signed it still returns an error

are you sure that this is a full package of manila

[dahlem]

I found it in the registry. How exactly do I disable this?

[iruja]

I got it working, but it isn't exactly doing anything, and slow as hell (note the fps meter in the corner)
Btw the weird stuff on the bar is the molski.biz lvm top battery plugin going crazy when the ppc is docked or charged.
Some screenshots:

http://www.plaatjesupload.nl/img34/1201628473-520.pnghttp://www.plaatjesupload.nl/img34/1201628519-570.png
http://www.plaatjesupload.nl/img34/1201628565-070.pnghttp://www.plaatjesupload.nl/img34/1201628604-330.png

[iruja]

http://www.plaatjesupload.nl/img34/1201628638-620.pnghttp://www.plaatjesupload.nl/img34/1201628680-380.png

[TimSykes]

So how did you get it working?

[qtek_metanol]

Holy s....!! what you did..?? you say that you can not execute anything with it..??
can you post your result file....??

[johanromijn]

:D Handige jongens die Nederlanders! :D

Looks nice, is it running on a VGA-device?

[ChiefmasterB]

Wow... yeah... plz upload your result file...

or plz tell how you got it working...

[iruja]

Ja he :P

It's running on an e-ten x800 operating at a vga resolution.
If you want to get it working, you'll need to copy libGLES_CM.dll to the manila dir.
The libGLES_CM.dll I use is 0,8, might be an old version but it was the only one I could quickly find.

[fb401]

I don't know if this will work on the kaiser simply because in the assets, they seem to only have VGA images.

[TimSykes]

where can I find that file?

[nsa666]

That dll is a part of 3d-driver. In software mode it will run realy slow. Is that means HTC plan to release the driver soon?

[ChiefmasterB]

Looks really cool.... trying with .dll....

Edit:

I see "HTC Home is running" ... but thats all... after few seconds the same error message...

[iruja]

I'll make a new cab file as soon as I got some time, give me 2-3 hours.
At least you can uninstall it without problems then :)

[the_passenger]

no wonder why HTC told us to cough up $$$ to buy new device w/ "driver" so it could run manila. Apparently, without hardware acceleration, this thing CAN'T be use.

[nsa666]

I think it would run with software emulation.. but not smoth. :(

[leoiden]

can anyone with kaiser confir if they manage to get it open or working?

[ChiefmasterB]

I copied libGLES_CM.dll to the manila dir on my Touch.

Does not work... :(

[Vinny75]

ogl-es

http://www.vincent3d.com/software/software.html

You can get it from sourceforge... damn work has sourceforge blocked...

(damn i was looking for gles and not gl-es...)

[NuShrike]

I copied libGLES_CM.dll to the manila dir on my Touch.

Does not work... :(There isn't a workig libgles_cm.dll for any of the MSM7x00 devices currently (except the KS20). This is what we're talking about for the lawsuit.

Also, notice all the icon images are for VGA? I don't think this is for our dinky ripoff HTC devices.

[the_passenger]

images/icons are for VGA, so, it won't work on the Kaiser/Hermes or any device w/ a qvga screen. Unless, it uses images from a dll.

[ChiefmasterB]

Hm... think you´re right...

[Vinny75]

well its running on my mogul... if you want to called it that...I'm getting .82 fps and 8.66 free ram with nothing else... its slow... and the graphics are off as we expected...

[iruja]

Attached the file with the dll, and one dll I suspect is not available on every pocket pc.
Not sure it will run on qVGA but at least you won't need to look for the dll anymore.

[SatScan]

:D Handige jongens die Nederlanders! :D

Looks nice, is it running on a VGA-device?


Yep it's VGA.

The Undutchables ;-)

[ChiefmasterB]

Attached the file with the dll, and one dll I suspect is not available on every pocket pc.
Not sure it will run on qVGA but at least you won't need to look for the dll anymore.

Thx.. well what can I say... it´s running.... but thats all I can say... :)

[petervbeck]

me too, it's running with the dlls, but absolutely useless, very slow and vga graphics....

[Vinny75]

I wonder if the resolution is set or tied to the graphic files, if so, could try reducing the dimensions of hte graphics file by 50% and seeing what that does...

[nsa666]

It works with incredible 0.89fps (and 51MB of ram aviable). And the resoultion is not correct.

[fb401]

Yup, just like I suspected earlier in this post. Since the images are VGA, someone will need to make them QVGA compat for the Kaiser. I'd do it but I'm a code guy, not a graphics guy.

[Pawel062]

nice app. wont work. needs more time.

[dsellers2]

Oh Boy,
How do I get this off once it's installed. I cant see my today screen now because of this software and it wont even load. Any help would be greatly appreciated.

[iruja]

just del:

everything in HKLM\Software\Microsoft\Today\Items\Manila
everything in Program Files\Manila
in \windows ManilaToday.dll

[dsellers2]

Thanks for the quick reply. Once I delete all this will my old today screen come back up?

NEVERMIND. THANKS FOR THE HELP!

[Doug2873]

Hi everybody

looking around to find out what is the status of HTC concerning a probably new drivers release for the devices with Qualcomm 7200 chipset, i've found the file below, which should contain a new User Interface code name MANILA.
I'm sure most of you hear about it.
Well, i've been trying to install the file, but in some way i don't get it, even if I edit the cab and write a new setup.xml. May be because I have the Original O2 ROM on my Orbit 2, i'm not sure at all

Could some of you try if the install works on your cooked HTC Roms ??

Download link:
http://rapidshare.com/files/87504139/manila.1.0.0103.0.release.zip.html

THX in advance

Metanol

I'll forward this to dutty, see if he can do anything with it.

[ChiefmasterB]

Thanks for the quick reply. Once I delete all this will my old today screen come back up?

You can also go to Settings - Personal - Today .. second tab "items" -> uncheck Manila... then your normal Today screen should appear again :-)

[dobb]

It is working on my ASUS P735, but very slow and it's VGA :(

[Casaboontha]

Installed on my elfin, slow as hell, and after resizing all the pictures the pugin resizes them back to VGA size...so it looks like shit on a QVGA device.
It seems that the software and place holders are all set for VGA. Perhaps any of the coders can have a look at this.
Anyway for anybody who will go so far to recode everything to QVGA, I attched the risized images. The zip file is still in the structure of the original program files structure.

[dobb]

If we resize images to make new folders called QVGA (in this moment there only VGA folders) and EDIT THE XML file with settings it maybe can be done

[hv_thugg]

If every body have this slow motion thing when its downloaded why you guys killing yall selvies over it?

[dobb]

the .m9 files are configuration files with coordinates. I will try to edit them

[Dinamitci]

If every body have this slow motion thing when its downloaded why you guys killing yall selvies over it?

If you ask a question like that here, I don't think you belong on this forum :p We try, we try and keep trying until it works, no matter what :p

[MaxMotus]

If you ask a question like that here, I don't think you belong on this forum :p We try, we try and keep trying until it works, no matter what :p

Agreed! Its the challenge lol

[dobb]

In the *.m9 files are all the objects hight and width.
I will make little tool that will divide all the dimensions to 2.
That will make it work on QVA I think.
If anybody wants can help too.... :)

[dobb]

I edit the .m9 files and it runs in QVA with FPS 12-13!!!!
But must edit many other properties to work fine.
But in QVGA mode it is much faster!!!

[yaron316]

I edit the .m9 files and it runs in QVA with FPS 12-13!!!!
But must edit many other properties to work fine.
But in QVGA mode it is much faster!!!

are you serious? that's awsome news!!

[dobb]

Yes, i'm absolutely serious, but now I must edit the animations
It's not looking good yet it QVGA, but I hope I can make it work!
I'll post when I make something

[NeoS]

Sweet. It looks very promising. Are there any new things in there that aren't in HTC Home now? :)

[nsa666]

I've wrote some script that exchanges all X=" Y=" Z=" Widht=" Height=" values to value/2 but it didnt work. Did i missed something?

[kcguy]

dobb,
I've already edited the images for QVGA. If you've edited the configs, then we should be set.

[kcguy]

I've taken a look at the m9 files and I can open and edit them with notepad. I haven't the time to work on the editing right now, so I hope dobb has had a chance to edit some more. At present, It won't even install on my wizard.

[dobb]

dobb,
I've already edited the images for QVGA. If you've edited the configs, then we should be set.

I've put those images. Also make a tool to delete all X,Y,Width,Height and Value settings to 2. It work but the result is "shit". In the .m9 files there are functions for the animations. We have to edit them too, because there are coordinates too.
The good news are that on my device it works with 12-13 FPS!
I'll keep trying and if I find anything else I will share

[TraderStav]

I find it very funny that everyone is scrambling to get this to work but when it's finally released it will be a mad rush to disable it in favor of all the other third party apps that crop up.

[NeoS]

it's the challenge, mate. Tweak and mod as much as you can, then say it's crap and start over with something new. :D

[TraderStav]

it's the challenge, mate. Tweak and mod as much as you can, then say it's crap and start over with something new. :D

Oh, I believe you and agree 100% but I still have to laugh!

[varaff]

[QUOTE=iruja;1864343]I got it working, but it isn't exactly doing anything, and slow as hell (note the fps meter in the corner)
Btw the weird stuff on the bar is the molski.biz lvm top battery plugin going crazy when the ppc is docked or charged.
Some screenshots:


How did you manage to get it working?

[iruja]

just used the dll's I provided earlier in this thread.

[varaff]

just used the dll's I provided earlier in this thread.

Sorry, about that..
Got it working (slow but working)
thanks.

[jrronimo]

Hi guys,

Since everyone was mentioning a VGA device, I thought I'd chime in. I've got an HTC Universal and I just installed this. I used the oglES file from here (http://www.vincent3d.com/software/software.html) and I am getting a whopping 1.29 FPS with 12.7 Avail. RAM.

Looks great, except that Manila doesn't have provisions for landscape mode. I can rotate the device to Portrait, though to see the full screen. It's very pretty, that's for sure.

Good find and thanks!

[flaviopac]

Anyone tried Manila on a Touch??

Does it work on QVGA??

[eddict]

is't working badly on a touch. cos it's for vga!

[KnightmareCS]

jrronimo, howd u get 1.29 fps out of the universal? im only managing to get ~.93 with ~7.69 ram

__

nvm, i got it going. ~1.32 with ~12. havent tried much but it does not find any music, only this U2 song and the camera doesnt load. it seems like it would make a nice UI

[drownage]

It works with incredible 0.89fps (and 51MB of ram aviable). And the resoultion is not correct.

Same thing except 46 MB RAM free... using Dutty's V3... This is on AT&T Tilt... I actually just used the dll file from their website... instead of the zip attached... thinking it wud be faster... and it is... like .04 faster :-/

I am liking it and really want to get it working with correct resolution... The resolution might also be the reason slowing it down i am guessing...

[drownage]

are you serious? that's awsome news!!

yea that will be awesome... post you config files if you dont mind... maybe others can collaborate and help make it better...

[Nadavi]

yea that will be awesome... post you config files if you dont mind... maybe others can collaborate and help make it better...

This guy stated he got Manila running on the Kaiser:

http://forum.xda-developers.com/showthread.php?t=364459

Nadavi

[neptune]

interesting thread...hope you guys can get this working for qvga devices...don't use the cube but its nice to show people

[abdelamine]

where i copy the 2 DLLs files exactly
\windows or \manilla or \manilla\HTC

[dobb]

where i copy the 2 DLLs files exactly
\windows or \manilla or \manilla\HTC

\Program Files\Manila

[abdelamine]

i get worked on my himalaya
1.2 fps And 27 mb avail ram
but in vga not qvga
so i try test it with qvga soon

[nsa666]

Actually it CAN work on QVGA.;)

(only proof of concept. i've patched some scripts)

[dobb]

Actually it CAN work on QVGA.;)

(only proof of concept. i've patched some scripts)


My result of editing the scripts is very close to this. Keep working :)

[briggs81]

You guys alll deserve donations if you get this working smoothly

[yaron316]

You guys alll deserve donations if you get this working smoothly

no doubt about that :)

[nsa666]

It WILL NOT work smooth without 3d driver.:(
Even with that simple picture i have something about 2fps.->unusable.

[Doug2873]

It WILL NOT work smooth without 3d driver.:(
Even with that simple picture i have something about 2fps.->unusable.

agreed...without 3d drivers id assume that this new stuff that htc is coming out with (probably geared more towards the android system) that we are not going to just be able to rewrite the scripts to get it to work smoothly...hopefully the new devices will also be a variant of the msm7500 and we can rip the drivers from them

[drownage]

agreed...without 3d drivers id assume that this new stuff that htc is coming out with (probably geared more towards the android system) that we are not going to just be able to rewrite the scripts to get it to work smoothly...hopefully the new devices will also be a variant of the msm7500 and we can rip the drivers from them

Yea i hope they use 72xx or 75xx from Qualcomm cuz then I think it wont be too hard for us to rip the drivers out...

The thing is that however if HTC planned to have this on new phones with same chipset, then why wouldnt they just release a patch for our phones?...

Well, atleast theres a lot of hope in the lawsuit since i saw an image of an open kaiser on this forum which actually has the qualcomm 7200... :) meaning hardware acceleration is supported :)

[dobb]

It WILL NOT work smooth without 3d driver.:(
Even with that simple picture i have something about 2fps.->unusable.

Can you upload what you have done, because with my experiments I have 12-13 FPS to test it.
10x
Soon I will upload my work!

[nsa666]

Some patched scripts. For testing ONLY!(its a pre-pre-alpha)

[shael]

so if i thro those scripts in program files/manila ill get it working decntly?

[austinsnyc]

really great work guys! I'm very impressed with the work you all have put into this. Please release the work you have so I can take a look at what you have done and lend a hand at the coding side of things. i do not think HTC is going to release new drivers WM6.1 would have been a perfect time for them to do so and they did not unless they are waiting till the RTM build is released but my spies say that has already happened lol..

[nsa666]

It will not realy work! It is just a test! not for using! But if you want to see it place the m9 files in Manila\HTC and .lua in Manila\HTC\Scripts

[Martinhdk]

really great work guys! I'm very impressed with the work you all have put into this. Please release the work you have so I can take a look at what you have done and lend a hand at the coding side of things. i do not think HTC is going to release new drivers WM6.1 would have been a perfect time for them to do so and they did not unless they are waiting till the RTM build is released but my spies say that has already happened lol..

Austin - please let us know what else you have heard in the secret corridors....:cool:

[manaaa]

manila youtube vid

http://msmobiles.com/news.php/7064.html

[gmontem]

Does this interface only work with HTC devices? Has anyone tried this with an O2 XDA Flame?

[iruja]

Does this interface only work with HTC devices? Has anyone tried this with an O2 XDA Flame?

http://forum.xda-developers.com/showpost.php?p=1864423&postcount=21

Works on all devices, no htc-only certificate included

[nsa666]

it would be interesting if somebody test it on LG KS20.

[Merlin_reloaded]

on 200Mhz (unclocked) Wizard, and get ~1.25FPs with 16MiB RAM free.

Keep working!

[drownage]

With the scripts.zip posted, I get a whopping 2.35 FPS, everything seems to be broken... I can barely read the time... and cannot even see the navigation... just weird stuff in its place..

Hopefully it can be all working soon :)

[joshuawittstock]

ok, just tried on my hermes. running at 4.16fps, and have 18 free ram. nice work !

[drownage]

ok, just tried on my hermes. running at 4.16fps, and have 18 free ram. nice work !

Hey thats nice... Does ur screen look pleasable? or is it all broken?

[nsa666]

it will not look good with patched scripts i've posted, because it is not ready.

[DomZ]

it would be interesting if somebody test it on LG KS20.

I have installed it on my KS20, but nothing happen when i click on manilla.exe ...

I have installed the cad present on the first post.

Do i need to do something else ?

[nsa666]

I have installed it on my KS20, but nothing happen when i click on manilla.exe ...

I have installed the cad present on the first post.

Do i need to do something else ?

copy the dwmapi.dll(but not the Software-libGLES_CM.dll) in the \Program Files\Manila folder

[DomZ]

copy the dwmapi.dll(but not the Software-libGLES_CM.dll) in the \Program Files\Manila folder

I have copied dwmapi.dll but the program hangs.
After i copied libGLES_CM.dll and it's ok but of course slow.

I would like to try the lib that is on my Windows folder but the system don't allow me to copy the DLL :(

[nsa666]

It means that it will not work with the driver of KS20 (because snice the dll is in windows folder it will be used).

[udK]

On my Kaiser.. 0.66 FPS :D :D

http://img170.imageshack.us/img170/299/000yd4.png

[avengerpenguin]

Looks good

[crusti]

ok, just tried on my hermes. running at 4.16fps, and have 18 free ram. nice work !

im getting about 1.1fps and 15 meg available on my hermes with , and its in VGA, as in UDK's pic

do you have any tips to suggest joshuawittstock, any pics to see hows it running?
cheers

it does look a great app

[nsa666]

actual state of patching it for 320x240 see screenshoots:

[joshuawittstock]

looking good nsa666, i got it to run on my hermes at 4.16 fps, by using the qvga images tht were uploaded here, and the pre scripts, its all messed up and cant really see much, but its a good start. using both the dll's.

[DomZ]

It means that it will not work with the driver of KS20 (because snice the dll is in windows folder it will be used).

I have try to put the Windows libgles_cm.dll of the KS20 on the Manilla folder but that don't work, the program hangs at loading step.

[kcguy]

Dobb,
Any more progress? I,m working on cleaning up some of the smaller images, so it will look better when it's ready to try. I have edited some of the m9s, but there is a lot of editing to do! If you or nsa666 have finished all the m9 edits, could you please post them for download. I would like to try them out on the wizard and see what this app is supposed to look like, even if it's slow and resource demanding.

[dobb]

Dobb,
Any more progress? I,m working on cleaning up some of the smaller images, so it will look better when it's ready to try. I have edited some of the m9s, but there is a lot of editing to do! If you or nsa666 have finished all the m9 edits, could you please post them for download. I would like to try them out on the wizard and see what this app is supposed to look like, even if it's slow and resource demanding.

I've tried your files on my device. Works with 5 FPS.
I haven't made anything, because the files are on my work computer, so monday I will go on.
Monday evenyning I will post what have I made :)

[dobb]

actual state of patching it for 320x240 see screenshoots:

Great work. Keep this way :)

[finesse]

sloooooooooow

[drownage]

Man not slo... this is fast... the software isnt even out yet lol...

I bet this problem wud be solved automatically if we just get the drivers for qualcomm chips :-/...

[doedoe]

Just wait for the devices this was designed for...

Just think of the power and screen res ;) VGA, 500+mhz

The replacment to the touch is gonna be a killer - what do you think the storage will be like, they are going after iPhone, right? 1gb, 2gb 4gb + onboard? ;)

[Svop]

Is it good working on Elf?
+
how 2 install it?

[Re-Mi]

Is it good working on Elf?
+
how 2 install it?

No
+
You don't leave it up to the developers

[SETOUF]

It Works Only In Theire Minds
Have To Wait 2009 For Wm7

[whistler-nl]

No
+
You don't leave it up to the developers

You cant tell people not to install like that.
I'm not a developer but i allways like this kind of stuff just to figure out how to get it running on a device it was'nt meant for.

My advice, if you like to play around with scripts and stuff you can install it and have something to do for a while. If you dont want to edit files and stuff i guess you'll have to wait until it's at least working.

[Re-Mi]

You cant tell people not to install like that.
I'm not a developer but i allways like this kind of stuff just to figure out how to get it running on a device it was'nt meant for.

My advice, if you like to play around with scripts and stuff you can install it and have something to do for a while. If you dont want to edit files and stuff i guess you'll have to wait until it's at least working.


Okay, you're right. I've got the same atitude as you just try it and if it doesn't work hard reset the device.. I reacted that way for several reasons.
1. it's monday morning blah weekend is over.
2. He/ She just has 1 post count, i asumed the next post he would post. Help my touch is dead.

Okay i should not judge people by their post count. Sorry for that http://www.jackoverfull.com/forum/emoticon/flower.png

[Svop]

2. He/ She just has 1 post count, i asumed the next post he would post. Help my touch is dead.

Oh, man, I'm not going to do with my Elf smth, about what I don't know enough.

I've got new Elf, w/o unlocked CID and its version is 1.15.411.1B RUS, what I have to do to install Manila?

P.S. sorry for my English, if it's incorrect =/

[Registerme]

Just wait for the devices this was designed for...

Just think of the power and screen res ;) VGA, 500+mhz

The replacment to the touch is gonna be a killer - what do you think the storage will be like, they are going after iPhone, right? 1gb, 2gb 4gb + onboard? ;)

Oh yes, this is so true. When I put this on my phone I thought: Well the XDA Flame could handle this easily with a customized driver for it's Nvidia GPU. Maybe this stuff in intended for the XDA Flame 2, I hope it will be released soon.

[ark666]

Hi guys

Just a thought, isn´t this a bit like Pointui, with a different interface???

Cheers.

[drownage]

I'd agree... except this is supposively official HTC and pointUI is just another app... But still yea its the same... But as you can see manila seems to do more than pointUI... The bad thing about wm is that u cannot integrate stuff into the shell... so once u get into an app, its the same old wm again :-/

Hi guys

Just a thought, isn´t this a bit like Pointui, with a different interface???

Cheers.

[Svop]

So? U may gimme links to FAQ, that consists enough info, concernin my question, if it's exist ^^

[domineus]

there are 2 dlls that you place in the program files/manila portion of your device I believe iruja contributed the files
they are also in this thread so back trap maybe to page 3-6 to get the dll files
but once it is installed it is slow and only for vga devices...I'd wait because uninstalling is a pain

[drownage]

ok i guess this thread just died... any updates yet?

[BlondBear]

Conveniently but works very slowly.
http://4pda.ru/forum/uploads/img-71444-Screen001.png http://4pda.ru/forum/uploads/img-71445-Screen006.png
http://4pda.ru/forum/uploads/img-71446-Screen018.png http://4pda.ru/forum/uploads/img-71447-Screen014.png

[BlondBear]

http://4pda.ru/forum/uploads/img-71448-Screen015.png http://4pda.ru/forum/uploads/img-71449-Screen021.png

http://4pda.ru/forum/uploads/img-71450-Screen022.png

[Re-Mi]

I'm also verry curious about the Qvga development.

Greetz

[dobb]

This is my work about Manila QVGA. It did not work fine but I will keep working on it. The speed is good on my ASUS

If somebody have made anything else please upload to combine our work

http://rapidshare.com/files/89898571/Manila.zip.html

Sorry for the RapidShare link, but I can't upload it here in this moment

[dobb]

actual state of patching it for 320x240 see screenshoots:

This is great result. I can't make it that clear at this time
Can you share your files?

[HerrVorragend]

The speed is good on my ASUS

Can you say it "in FPS"? Is it good enough to use it?

[dobb]

Can you say it "in FPS"? Is it good enough to use it?

About 5 FPS, but the images are not good yet.
It can be used normal for me

[Vukile]

This is my work about Manila QVGA. It did not work fine but I will keep working on it. The speed is good on my ASUS

If somebody have made anything else please upload to combine our work

http://rapidshare.com/files/89898571/Manila.zip.html

Sorry for the RapidShare link, but I can't upload it here in this moment

If its all the same to you,sir, Ive suffered at RS for the benefit of others and uploaded your file here (http://www.sendspace.com/file/u9yre8).:)

[nsa666]

It is simpler than it seems. You dont have to change all values.;)

But unfortunatly, at the moment, i dont have time for this and it makes no sense without proper 3d drivers. :(

Here is the second try(unready scripts).

[joshuawittstock]

working nicely on my hermes, keep up the great work

[CortDillon]

Can any one tell me why when I try to open the .exe file I receive an error that this is an invlaid win32 file? I would greatly appreciate the help!!

[undac]

Can any one tell me why when I try to open the .exe file I receive an error that this is an invlaid win32 file? I would greatly appreciate the help!!

Are you trying to run it on a desktop PC???

[dobb]

Here it is. My next beta:)
The problem is that the tab buttons (bottom bar) didn't work at this time.
I'm working on it, and if somebody can help It will be great.

Extract and copy in Program Files over the old folder.

http://rapidshare.com/files/90365026/Manila.zip.html

[briggs81]

About 3 - 3.5 fps on average with 41 available ram with the latest.

[domineus]

on qvga I am running 4.1-4.25 with only 14 mb ram
but it runs faster and it looks really nice...the tabs are an issue but I imagine those will run in time I guess
that being said it is a good looking app though I can see how rendering can be an issue without a 3d gfx driver

[dawilliams660]

I am running 3.1-3.25 with only 57 mb ram on my Sprint touch

[xplode]

Here it is. My next beta:)
The problem is that the tab buttons (bottom bar) didn't work at this time.
I'm working on it, and if somebody can help It will be great.

Extract and copy in Program Files over the old folder.

http://rapidshare.com/files/90365026/Manila.zip.html

for the tabs button i think a lil patch should be done in manila.exe :) the tabs work but they are out of range for qvga devices.

[kcguy]

Keep up the good work Dobb! Big difference as you can see from the screenshot. The bottom tabs don't work, but great progress!

[Jckf]

Ooo. Looking forward to a fully working version of this.

[drownage]

Ooo. Looking forward to a fully working version of this.

Its gonna be impossible... Best frame wud be like 7... and that to if and when this is finalized on our devices...

We need to just get the correct drivers first... then this wud be working flawless without any other modification...

[ouioui01]

Thanks dobb for your hard work...and go on!!!!

cheers,

ouioui

--
HTC Polaris (FRE Rom)

[silkep]

Ja he :P

It's running on an e-ten x800 operating at a vga resolution.
If you want to get it working, you'll need to copy libGLES_CM.dll to the manila dir.
The libGLES_CM.dll I use is 0,8, might be an old version but it was the only one I could quickly find.

with this istructions It work also on a ETEN X500+ (VGA display).
I just download and copy libGLES_CM.dll from arm release (ogles-bin-1.0.0)

but slow average framerate (1.04)

Silke

[Registerme]

I think I just found out what Manila is for: the Nvidia APX 2500. I read it yesterday at Engadget (http://www.engadgetmobile.com/2008/02/13/hands-on-with-nvidias-apx-2500-and-yeah-it-plays-quake/)and it seems to be the most promising performance upgrade for mobile phones.
Playing Quake 3 or recording Video in 720p sound more than good to me. I really hope that HTC will use those!

[kcguy]

Hi guys,
I've read several posts about manilla not working until we have better video drivers. I'm not an expert, but I know some of you are and I wondered how you know that it was written with different or future drivers in mind. If it is written for different drivers, why can't it be modified to utilize the current drivers we have? I've seen what Slither has done with the cube in c++ and its amazingly fast. I don't know what language manilla is written in, but surely one of you guys know enough to re-code this program to achieve at least 20fps, which would be more than acceptable. Maybe it's impossible, but there is a lot of talent on this site.

[deonidis]

any news ...

[joshuawittstock]

any updates?? looking forward to having this run at a decent fps

[guitargurl08]

can you please tell me, someone, how do i get touch flo, touch cube w/e onto my fone please?! i been trying for i dont no how many days and i jsut dont understand all the lingo to do what i need to do necessarily

[briggs81]

Don't know what phone you have, but here are links.

FtouchFlo http://forum.xda-developers.com/showthread.php?t=338143
FtouchFlo Config http://forum.xda-developers.com/showthread.php?t=345568
Cube App http://forum.xda-developers.com/showthread.php?t=343583

[bhanab]

Please help, how do I fix my today screen ?

It does show a plugin on the today screen "Tap here to start HTC Home.".
But it will respond with a "HTC Home is terminated unexpectedly, please tap here to start HTC Home."

[ceevee369]

Please help, how do I fix my today screen ?

It does show a plugin on the today screen "Tap here to start HTC Home.".
But it will respond with a "HTC Home is terminated unexpectedly, please tap here to start HTC Home."

Would you mind reading from the beginning of the thread? Reading is knowledge :)

[Angora]

can you please tell if manila work in htc TyTN II and tell how i make´t work please

[variosteph]

can you please tell if manila work in htc TyTN II and tell how i make´t work please

like ceevee369 said just 1 post above:

Would you mind reading from the beginning of the thread? Reading is knowledge :)

Sorry for my copy and paste, but i couldn´t resist!:D

[Angora]

wath i wont to now is iif i intal the first cab in the firt post or the beta version from dobb and if i need to instal the dll files 2
thanks

[Isaygarcia]

anyone got this working?

=)

[drownage]

seems like all hope is dead.... for this, anddroid, and even for drivers

[Angora]

i got it work

[ElProempie]

i got it work

Well then.. Be kind and say all of us how you get it to run.. :rolleyes:

Looking forward to your reaction.. :D

[l3v5y]

i got it work
At what frame rate though?

Well then.. Be kind and say all of us how you get it to run.. :rolleyes:

Looking forward to your reaction.. :D

This is what my e-mail notification said

i got it work but not like they said here i instal the file but not this one i live here rhe file that i instal but dont forget to instal the music plugin sorry to the autor but i´m try to help

[thimiost]

post deleted

[erezj]

well any news???

[erezj]

did some 1 got it to work right?

[austinsnyc]

mods should close this thread! Unless this is rewritten in C+ or C++ this will not run properly on our Kaisers. We don't have the proper drivers nor enough horse power under the hood to run it in its current state! if you would like to try it and see start at the first thread and read to the end there are .dll uploaded here and there you need to make it work BUT I WILL TELL YOU IT WONT WORK PROPERLY AND YOU WILL HAVE SUPER SLOW FPS!!!!

[Vukile]

Its too pretty to leave alone,but its not good for our devices.Decisions....:)

[iceman4357]

...Wow, I like this look much better than what we currently have!! Hopefully we can get the bugs worked out and let the cooks do their work!! (hint Dutty) ;)

[xmoo]

did some 1 got it to work right?

Yes I got it to work.

Extract these dlls in /Programm files/Manila
And it should work.

[mikeeey]

Yes I got it to work.

Extract these dlls in /Programm files/Manila
And it should work.
haha 15 views after 2 hours.

[jlor]

The RapidShare link in the first post is dead. Every "patch" in this thread is related to the files in that link.

Could somebody re-post the original cab file in this thread for the ease of every user here.

[xmoo]

LINK FIX: http://www.speedyshare.com/787409697.html

HTC Manila: http://www.speedyshare.com/787409697.html

DLLS to get it to work:

Install the cab, put the dlls in the Manila directory.

Peace!

Ps. I had some changes in the settings and I was able to get 5 fps instead of 1.5 :O

[dniitani]

LINK FIX: http://www.speedyshare.com/787409697.html

HTC Manila: http://www.speedyshare.com/787409697.html

DLLS to get it to work:

Install the cab, put the dlls in the Manila directory.

Peace!

Ps. I had some changes in the settings and I was able to get 5 fps instead of 1.5 :O


What setting did you make to get more speed? Mahalo for you work so far.

[ChInEsE ChIcKeN]

i tried to install the cab but before anything could happen. the installation shows " the installation was unsuccessful"

[denull_0]

i'm with qtek s200...but please do something about cos this is really beutiful :)

[xmoo]

What setting did you make to get more speed? Mahalo for you work so far.

Dunno any more. Played with a lot of the files.

[ChInEsE ChIcKeN]

does anyone know what is going on from the fact that my cab isnt installing?

[xmoo]

does anyone know what is going on from the fact that my cab isnt installing?

No :$
I have the same ROM but diffrent radio, and it works.....

[xnaught]

ive put it on my tytn II and its not running right...I can see the calander numbers thingy and everything is a bit screwed..

Hopefully a more stable version will come along soon :)

[miso82]

Hey guys!

I have the right Hardware for this interface:

Dell Axim X51v VGA with 624Mhz and a 3D Acceleration.
But unfortunatly I cannot get manila.exe to start, even with the 2 dlls files...

Is it maybe because the mentioned device is WM 5.0 ??
Do I need WM 6.1??

Because in some way I have the feeling that from the Hardware side my device is predestinated for testing manila speed...

What you think?

[JKingDev]

So it seems that this is TouchFLO 3D. I don't know if we will ever get it working on existing devices because it is VGA and I heard it relies on a good GPU. Then again, the Touch Diamond does use the QC MSM7201A so maybe that just means HTC is actually utilizing the ATI chip now. If that is the case, hopefully we can get it running on the SE X1 which has the same hardware.

http://www.htc.com/uk/product.aspx?id=46054

[xmoo]

Hey guys!

I have the right Hardware for this interface:

Dell Axim X51v VGA with 624Mhz and a 3D Acceleration.
But unfortunatly I cannot get manila.exe to start, even with the 2 dlls files...

Is it maybe because the mentioned device is WM 5.0 ??
Do I need WM 6.1??

Because in some way I have the feeling that from the Hardware side my device is predestinated for testing manila speed...

What you think?

The time this released everyone was using WM6.0

[dane]

how can i remove the 2 windows that shows the ram and the fps ???

[drownage]

OMG... just watched the touch diamond video... we have to rip the drivers and touchFlo 3D from it asap... that is the iphone killer right there... i like it much better than the X1 interface...

But, nvidia apx mobile interface still beats em all...

[drownage]

EDIT: Err... double post... please remove...

[Caramel]

Hi all !

All is possible !!! It work badly, but it work ... between 3 and 4 fps and 30 Mo avail ... on a qtek 2020 !!!

[xmoo]

how can i remove the 2 windows that shows the ram and the fps ???

Not, cause this is a beta edition.

[HTCFAN0923]

Does anyone know where the cab file is located so I can give it a go with my Tilt?

[xmoo]

Does anyone know where the cab file is located so I can give it a go with my Tilt?

http://forum.xda-developers.com/showpost.php?p=2153845&postcount=179

[sd73ta]

any other links cause that ones not working either

[geoff.sim]

any other links cause that ones not working either

They just worked for me...

[xmoo]

They just worked for me...

Mayb hes on proxy or something.

[sd73ta]

working now thanks

[lvyelion]

Slow but running, 1-2FPS, >64MB ram, Toshiba G900.

[und3rmysp3ll]

Hey Maybe you guys can use these IMGS I did. I the PNG images were decomposed to Grayscale RGB-Alpha. I did this because scaling the IMGS down changed the RGB layers from the VGA originals. Then I scaled them cubic 50%. The recomposed them back to RGB-Alpha png. I didn't see any other images in the dll or exe.Hope you guys can use this.

[dane]

i try it out and i will report if it works

thank you


edit:
its work a lil bit smoother but at the fps is no chances...
no buttons to press .. only the interface is smoother !!

thank you for your work

[nipbruce]

could someone kindly post the updated manila so i could also take a try using it wif qvga on my cruise (aka poloris)

Thanks :D

[davidebeatrice]

could someone kindly post the updated manila so i could also take a try using it wif qvga on my cruise (aka poloris)

Thanks :D

quote...my tytn II need it!!!!
:)
Thanks!!!

[sala91]

So any progress?

Should i dare to install it on my HTC touch?

[davidebeatrice]

but...Manila is a beta version of the Diamond Homeplug software?..if so...it's not possible to dump diamond rom and resize the images files/edit some script?

sorry if the question is stupid...

[yes2000]

Thanksthanks

[speedblaster@yahoo.com]

I've read this whole thread, but the essential question remains, Has anybody got it to work perfectly on a QVGA screen? If yes could you please list step by step instructions and links to the exact files that you used.
Thank you.:)

[r75]

I've read this whole thread, but the essential question remains, Has anybody got it to work perfectly on a QVGA screen? If yes could you please list step by step instructions and links to the exact files that you used.
Thank you.:)

also for me!!!
please...
I'm waiting but I cannot
thx

[davidebeatrice]

also for me!!!
please...
I'm waiting but I cannot
thx

quote!!!:)

...in a news italian site (i don't know if i can post here the link to external site) i've now read that, when available, the manila interface will be released by htc for new phones and for htc Touch, Touch Dual, Touch Cruise, TyTN II also...something right and truth?:confused:


"In ogni caso, quando HTC ufficializzerà la disponibilità della nuova versione del TouchFLO, essa sarà subito disponibile per il Touch, Touch Dual, Touch Cruise, TyTN II e per i futuri device."

[morina]

Hi all,

I installed the software with the sugested dll's and still not working on my Elfin (T-Mobile MDA ver. 0300).

Now i'm stuck without today screed.

Somebody please help about uninstalling or reverting to the previous home screen that i had.

Thanks for helping

[r75]

Hey Maybe you guys can use these IMGS I did. I the PNG images were decomposed to Grayscale RGB-Alpha. I did this because scaling the IMGS down changed the RGB layers from the VGA originals. Then I scaled them cubic 50%. The recomposed them back to RGB-Alpha png. I didn't see any other images in the dll or exe.Hope you guys can use this.

tnx so much, but they don't work so good like the originals imgs.
:(

[speedblaster@yahoo.com]

Hi all,

I installed the software with the sugested dll's and still not working on my Elfin (T-Mobile MDA ver. 0300).

Now i'm stuck without today screed.

Somebody please help about uninstalling or reverting to the previous home screen that i had.

Thanks for helping

Go to Program Files/Manilla on your phone and manually delete all the files. And go to Settings/Today and in today items uncheck Manilla.

[HTCFAN0923]

I've installed the manila QVGA zip folder, and extracted all the files onto the manila folder. I extracted the dll zip folder onto the manila folder. Soft resetted my Tilt after I did a hard reset to being my manila experimentation. Still no go. Anybody else have any other suggestions?

1 question: Was I suppose to overwrite the manila folder with the extracted parts from the manila qvga zip folder?

[daniel.bigred]

hey, if anyone cares, this is working on my Artemis, it is slow but it will show up contacts or call history, it just takes a very long time (haven't done much with it).

have a look at the screenshot, 1.5fps 7.02mb ram on a 200mhz ppc!

keep it up guys!

[r75]

hey, if anyone cares, this is working on my Artemis, it is slow but it will show up contacts or call history, it just takes a very long time (haven't done much with it).

have a look at the screenshot, 1.5fps 7.02mb ram on a 200mhz ppc!

keep it up guys!

why your phone can display all the manilla graphic?
we have the same screen (qvga, 2,8 320x240) and the same ram but, I've the double speed processor!
:confused::confused::confused:

[davidebeatrice]

in my tytn II only the first page works...all other tabs not...
waiting for final release...from htc, if the italian site posted up says the truth..or from any willing and able developer...:) thx!!!

[HTCFAN0923]

in my tytn II only the first page works...all other tabs not...
waiting for final release...from htc, if the italian site posted up says the truth..or from any willing and able developer...:) thx!!!

what did u do to get it to work?

[davidebeatrice]

what did u do to get it to work?
ive simply installed the cab found in one of previous posts...but the interface works very slowly and only the first tab and call history/contacts are working...

...no news from who knows how to get it fully working?

[HTCFAN0923]

ive simply installed the cab found in one of previous posts...but the interface works very slowly and only the first tab and call history/contacts are working...

...no news from who knows how to get it fully working?

I did just as you said plus I also tried everyone's suggestions but I still keep getting the follow message: HTC Home is Terminated unexpectedly, please tap here to start HTC Home.

Even if I could get it to work slowly and with just a few tabs working, It's progress. I'm wondering if it has to do with my rom. I'm using Dutty's Final WM6.1 rom that he did b4 he stopped working on roms. my radio is 1.58.16.27

[daniel.bigred]

why your phone can display all the manilla graphic?
we have the same screen (qvga, 2,8 320x240) and the same ram but, I've the double speed processor!
:confused::confused::confused:

well i installed the same cab file and copied the dlls to the \program files\manila folder and then applied the patch called HTC.ZIP (somewhere in the first 10 pages of thread) downloaded the QVGA zip (graphics) from another post and copied it to the directory on the device (\program files\manila\htc\assets)

after a soft-reset all was ok, the "time" animation will run until it reaches the current time then it will update normally.

PM if you get stuck

[HTCFAN0923]

sounds like a plan daniel. I'll go ahead and try that. Are you using WinRaR or WinZip?his

Edit: I've hard reset my device like 4 times already. This is hilarious.

[davidebeatrice]

well i installed the same cab file and copied the dlls to the \program files\manila folder and then applied the patch called HTC.ZIP (somewhere in the first 10 pages of thread) downloaded the QVGA zip (graphics) from another post and copied it to the directory on the device (\program files\manila\htc\assets)

after a soft-reset all was ok, the "time" animation will run until it reaches the current time then it will update normally.

PM if you get stuck
but have you all tabs working?

@ HTCFAN0923: "working" now?

[HTCFAN0923]

not yet, it's driving me nuts!

make it 5 times I've hard reset my phone

[daniel.bigred]

i have uploaded the files i used to get it working on the Artemis With Meschle's Rom ver 4.01. Instructions included.

***still does not work properly***

http://www.speedyshare.com/265427354.html

[HTCFAN0923]

ok, working on it

Edit: Should I just go ahead and drop it into my tilt as is and install. Do I need to extract anything b4 that?

sorry for all the questions.

[HTCFAN0923]

Nope. Still getting the same error message. I took the rar file, put it on my tilt, opened it up in WinRar, and installed the cab file that was in the rar file. did I do it correctly?


Edit: YES!!!!!!!!!!! I got it working.

0.97 Frames per second 40MB Ram available

it's kinda slow but the fact that it works is great!

Thanks alot Daniel and Dave! I really do appreciate it

[davidebeatrice]

Nope. Still getting the same error message. I took the rar file, put it on my tilt, opened it up in WinRar, and installed the cab file that was in the rar file. did I do it correctly?


Edit: YES!!!!!!!!!!! I got it working.

0.97 Frames per second 40MB Ram available

it's kinda slow but the fact that it works is great!

Thanks alot Daniel and Dave! I really do appreciate it

:)
..hoping that new and working (really working) version will be released asap!!!:D

[HTCFAN0923]

yea, those drivers from HTC are gonna be essential.

[EvgeniyKo]

Halp me! HTC manila interface dont work on my device ( Amoi - RoverPC: wm5). When put program sistem write: the programe not sign true certificate/ (my device on russian languge and I transfer russian into english). What make?

[HTCFAN0923]

ur gonna have to hack into ur registry and disable the signed certificate notification. U have an Amoi so while I have never used it, just go itno the windows folder and have a go at it.

[EvgeniyKo]

I not undesending what need change? I copy all files (dll, and some others and copy files- pictures for QVGA display). Maybe need the change sitings on registry?

[EvgeniyKo]

almost program from HTC dont work ( for example HTC albom, HTC home, and some others onle HTC audio manager work, later stating all programs sistem: the programe not sign true certificate)

[HTCFAN0923]

I not undesending what need change? I copy all files (dll, and some others and copy files- pictures for QVGA display). Maybe need the change sitings on registry?

there you go. Go into the registy. Somewhere in there you should be able to find the toggle to disable the signed certificate notification that keeps popping up.

[daniel.bigred]

If you can get the "Home" to display and the framerate is somewhat tolerable (anything above 4fps) then go into the \program files\manila\ and try play around with the shortcuts that are in the folder. The email shortcut brings nice 3d elements but you can tell its still designed for VGA device as 3d rendering is VGA in some cases (work on those scripts guys!)

sometimes you can get elements to work in the "screens" but they will not display properly. When you run the messaging shortcut it will take a while but eventually will load all your messages and allow you to scroll but not open them. also the "sounds" will show all of the ringtone-capable files on your device.

anyone with a better phone than me (Artemis 247mhz 23mb free RAM) should be way more successful.

[davidebeatrice]

If you can get the "Home" to display and the framerate is somewhat tolerable (anything above 4fps) then go into the \program files\manila\ and try play around with the shortcuts that are in the folder. The email shortcut brings nice 3d elements but you can tell its still designed for VGA device as 3d rendering is VGA in some cases (work on those scripts guys!)

sometimes you can get elements to work in the "screens" but they will not display properly. When you run the messaging shortcut it will take a while but eventually will load all your messages and allow you to scroll but not open them. also the "sounds" will show all of the ringtone-capable files on your device.

anyone with a better phone than me (Artemis 247mhz 23mb free RAM) should be way more successful.

...i've 3.05fps/64mb ram...but if i start any shortcut from |programfiles\manila the wm6 waiting animation starts, but after that nothing...

[kralikba]

Hello,
I have an XDA Flame and I thought Manila should be working well for me (VGA+3d acceleration on board)
However it always throws an "Unsigned" error (note: I have signature validation policy turned off).
Could this be a problem with my device not having a Broadcom but a Microsoft bluetooth stack? If so, do any "dummy broadcom dlls" exist?

[l3v5y]

I doubt it's a bluetooth stack issue...

What OS (WM6 or 6.1?) are you running?

Do you get the unsigned error with anything else?

[EvgeniyKo]

Hi,any body halp me, how need change register to sistem dont write everyone when I put manila interface: the programe not sign true certificate. Halp me please!!!!!!!!:confused:

[kralikba]

I doubt it's a bluetooth stack issue...

What OS (WM6 or 6.1?) are you running?

Do you get the unsigned error with anything else?

Well, I have WM5. As far as I remember, manila.exe had dll imports from some bluetoothy-named dlls which weren't in my \Windows folder.
Should I try a cooked WM6/6.1?

[waterskier33]

Please can you reupload it link in the first post doesnt work niether the speedyshare link does (it shows me some mobile wallpagers a nd games)

[davidebeatrice]

some questions....
*but there is someone working on this "manila beta" or we are all waiting for an official release?
me i'm not able to develop a working version for qvga...:(

*someone knows if the notice that i've read (that is manila will be released by htc for every touch device and for tytn II also) is true???:confused:

thx!!!

[roos_t]

as far as I know manila will come with the HTC Diamond... check out some vids on youtube ... the phone looks awesome

[davidebeatrice]

as far as I know manila will come with the HTC Diamond... check out some vids on youtube ... the phone looks awesome

yes, i know...but i've read that htc will release an upgrade to manila for the touch devices and tytn II..

[MartinMystere]

Hi Guys,

I got the HTC Diamond for testing, you can see the user interface(high res) here:

http://www.mobilforum.org/forum/showthread.php?p=380#post380

[l3v5y]

Hi Guys,

I got the HTC Diamond for testing, you can see the user interface(high res) here:

http://www.mobilforum.org/forum/showthread.php?p=380#post380
Feel like doing a ROM dump?

[martyotaku]

Hi Guys,

I got the HTC Diamond for testing, you can see the user interface(high res) here:

http://www.mobilforum.org/forum/showthread.php?p=380#post380

how bout dumping the rom?

[qtek_metanol]

I think HTC should release a Manila Interface with a ROM for the last devices with Qualcomm Proc. so that HTC could improve their image in front of their customer (us).

[duttythroy]

Full Manilla wont work on kaiser, trust me manilla cab floating around is just a tiny bit of whe Full Manila, sorry to give all bad news,:(