mattdehat
30th January 2008, 05:21 PM
Hi Im Using Xp Pro
THIS IS WHERE IM UP TO .SORRY IM NOT USED TO FORUMS.NEWBY.[please scroll to bottom of page]
The exe has created a folder on your C drive called Unlocker. There are 2 folders inside that one called kaiser-HardSPLv1 and one called kaiser-simunlocker
Note for Vista users
===============
If you do not have the latest version of Mobile Centre follow This guide to explain how to change your drivers to the xp. You will have problems running the unlocker otherwise. Log in as administrator if you run the ROM update tool and unlocker. That also applies to XP users.
Instructions
============
1. Install HardSPL as per the instructions:
1- Connect Kaiser to computer using USB cable
2- Make sure ActiveSync icon is GREEN
3- RUN kaiser-hardSPL.exe on Computer (PC)
4- Follow instructions on screen
To check it has installed correctly, power off and then press power on while keeping camera pressed, this will enter the so called bootloader mode and you see a tri-colour screen (Red, Green, Blue). You should see "SPL-1.0 OliPof" on the second line in the top left corner. You can exit this mode by means of a "soft reset": press the reset button with the stylus.
2. Make a note of the radio version that is currently installed. You see the version strings in the splash screen which appears soon after power on (e.g. "R 1.27.14.09") (Or by going to Start, Settings, System, device information). Since we will flash a special radio in step 5 you need to flash back your original radio in the last step. (If you have a UK Orange Tytn II with the radio version 1.27.12.29, Use Radio version 1.27.12.32. Keep a note of the unlocking Code as you will need to enter it again after you have re-flashed the Radio.) (You will find download links at the bottom of the instructions)
3. Connect PC and Kaiser with a USB cable and keep it connected until the last step.
4. Power on the Kaiser and let it boot into Windows Mobile. On the PC make sure the activesync icon is green
5. After you unpacked the download you see directories "step1" and "step2". Go into "step1" and run KaiserCustomRUU.exe. This will flash the special patched radio rom. Follow the instructions until it is finished.
6. Power off your Kaiser and insert a different SIM, i.e. a SIM from another provider than the one your phone is locked to. (if you have a pin on the sim disable it first)
7. Once Windows Mobile has booted up it will (usually after you have entered the usual 4-digit PIN) show a window called "Simlock" and a textbox where you can enter a 8-digit unlock code. Now perform a soft reset by pressing the reset button *but* at the same time keep the camera button pressed. If you did it well you will be back in bootloader mode and you see the tri-color screen. The best technique is to press and hold the camera button first and then shortly press the reset button with the stylus.
8a. right-click activesync icon and uncheck "Allow USB connections" from Connection Settings
8b. On your PC, go into the "step2" directory and run "kaiser-simunlocker.exe". If all went well you will see the unlock code on your monitor and your Kaiser is being restarted
MY KAISER DOES NOT RESTART and stays in tri mode AND THERE IS NO PASSWORD ON SCREEN.THANKS AGAIN
THIS IS WHERE IM UP TO .SORRY IM NOT USED TO FORUMS.NEWBY.[please scroll to bottom of page]
The exe has created a folder on your C drive called Unlocker. There are 2 folders inside that one called kaiser-HardSPLv1 and one called kaiser-simunlocker
Note for Vista users
===============
If you do not have the latest version of Mobile Centre follow This guide to explain how to change your drivers to the xp. You will have problems running the unlocker otherwise. Log in as administrator if you run the ROM update tool and unlocker. That also applies to XP users.
Instructions
============
1. Install HardSPL as per the instructions:
1- Connect Kaiser to computer using USB cable
2- Make sure ActiveSync icon is GREEN
3- RUN kaiser-hardSPL.exe on Computer (PC)
4- Follow instructions on screen
To check it has installed correctly, power off and then press power on while keeping camera pressed, this will enter the so called bootloader mode and you see a tri-colour screen (Red, Green, Blue). You should see "SPL-1.0 OliPof" on the second line in the top left corner. You can exit this mode by means of a "soft reset": press the reset button with the stylus.
2. Make a note of the radio version that is currently installed. You see the version strings in the splash screen which appears soon after power on (e.g. "R 1.27.14.09") (Or by going to Start, Settings, System, device information). Since we will flash a special radio in step 5 you need to flash back your original radio in the last step. (If you have a UK Orange Tytn II with the radio version 1.27.12.29, Use Radio version 1.27.12.32. Keep a note of the unlocking Code as you will need to enter it again after you have re-flashed the Radio.) (You will find download links at the bottom of the instructions)
3. Connect PC and Kaiser with a USB cable and keep it connected until the last step.
4. Power on the Kaiser and let it boot into Windows Mobile. On the PC make sure the activesync icon is green
5. After you unpacked the download you see directories "step1" and "step2". Go into "step1" and run KaiserCustomRUU.exe. This will flash the special patched radio rom. Follow the instructions until it is finished.
6. Power off your Kaiser and insert a different SIM, i.e. a SIM from another provider than the one your phone is locked to. (if you have a pin on the sim disable it first)
7. Once Windows Mobile has booted up it will (usually after you have entered the usual 4-digit PIN) show a window called "Simlock" and a textbox where you can enter a 8-digit unlock code. Now perform a soft reset by pressing the reset button *but* at the same time keep the camera button pressed. If you did it well you will be back in bootloader mode and you see the tri-color screen. The best technique is to press and hold the camera button first and then shortly press the reset button with the stylus.
8a. right-click activesync icon and uncheck "Allow USB connections" from Connection Settings
8b. On your PC, go into the "step2" directory and run "kaiser-simunlocker.exe". If all went well you will see the unlock code on your monitor and your Kaiser is being restarted
MY KAISER DOES NOT RESTART and stays in tri mode AND THERE IS NO PASSWORD ON SCREEN.THANKS AGAIN