i need URGENT help

[Berserk87]

i flashed my p4000 to the new rom, and my pst info cleared, which i have written down, but when i go to enter the new info in, it asks me for a unlock code...

in all the tuts i read it never told me how to check it or anything i dont know what the unlock code would be, i also bought it used, anyone know?

i cant use my phone until i fix this, and i really need my phone tonight.

[Carty]

Unlock code for the SIM or the phone? I presume theres nothing on your device till now, why not hard-reset or upgrade to another ROM?

Regards,
Carty..

[Berserk87]

htc p4000 have no sim cards.

im doing the ##778 to get into the PST menu, then when i try to edit it, to input my #, it asks me for an unlock code... :S

[freeza]

have you tried all 0s or 123456 or your phone number?

[Berserk87]

yes i tried a couple.

000000
123456
654321

i havnt changed the code...anyone know how to change it through an app or the default code?

arg!

i need my phone tonight.

[freeza]

yes i tried a couple.

000000
123456
654321

i havnt changed the code...anyone know how to change it through an app or the default code?

arg!

i need my phone tonight.

If it's anything like sprint, then a simple call to your carrier should remedy the problem. with sprint it's called an "MSL" and they give it to you when programming your phone. So if you call and tell them that you need to 'reprogram' your phone, they should walk you through the steps along with giving you the code.

[Berserk87]

if i reflash it with the nueROM v2 build 5022, its a sprint rom...so that would mean i could use the 000000 as the unlock code?

also, after flashing to the new roms, my phone continually reset...would go on for a minute then reset... thats why i went back to my default rom, but now its asking for an unlock code >.>

[jpurv]

Unzip this to your phone. Take your battery off and write down your Hex ESN. Run GetSPC.exe. Type your Hex ESN in the first box. The second box will be your unlock code.
*edit - removed file, missing keygen and someone linked to it on the next page.

[Berserk87]

k ill try that out, thank you.

any reason why my phone would be constantly reseting after installing the new roms?

[Berserk87]

k.

my EST is



but when i type that in, its saying "could not link to dll"

?

[jjlwork]

If I were you I would edit that post and remove that ESN # ASAP, people can use that to steal your service.

[Berserk87]

If I were you I would edit that post and remove that ESN # ASAP, people can use that to steal your service.


shit, i was worried something like that could happen.

it should be the hex of that number though right?

do i include the first 3 letters?

[Berserk87]

k i converter the esn to hex and its still not working >.>

[zaxdude]

k i converter the esn to hex and its still not working >.>


you might try the program found here:

http://forum.xda-developers.com/showthread.php?p=1541466 (it's the program called GetSPC)

i tried it on my phone and it provided an MSL number. hafta admit, tho - the MSL it gave me didn't work (and it differs from the MSL i have written down for my phone).

i might also suggest that you SEARCH...it's what I did to find the above. you might also try calling your carrier and ask them what the unlock code is.

OH -- use a HEX version of the ESN, and use ALL CAPS for any letters in the HEX version. It still may provide you with an invalid MSL...but worth a shot.

[jjlwork]

Make sure you are using the correct number for ESN, just converting the number from the back of your phone to hex will not work. Click program settings and device information on the bottom it will say ESN followed by a 8 digit hex number..that is the hex esn, you then put that in GetSPC and it will give you your 6 digit master unlock code. Dial ##6digitcodeSEND and it will open up to a place with 2 settings that can be changed, enter your 10 digit phone number for these two settings.

If you still can't get it, call Telus & tell them you can't make any calls, they will walk you thru the reprogramming process.

[Berserk87]

Make sure you are using the correct number for ESN, just converting the number from the back of your phone to hex will not work. Click program settings and device information on the bottom it will say ESN followed by a 8 digit hex number..that is the hex esn, you then put that in GetSPC and it will give you your 6 digit master unlock code. Dial ##6digitcodeSEND and it will open up to a place with 2 settings that can be changed, enter your 10 digit phone number for these two settings.

If you still can't get it, call Telus & tell them you can't make any calls, they will walk you thru the reprogramming process.


ahhhh

thats what i was doing :loollll

[Berserk87]

k, i entered my hex number and its still saying "cant link to dll"

i got like 15 minutes to figure this out :O

[Berserk87]

k the "phonetools" the other guy linked too was missing files, so it wouldnt work either way, lets try the real one >.>

[Berserk87]

WORKED, AWESOME.

now to test it out

[jpurv]

k the "phonetools" the other guy linked too was missing files, so it wouldnt work either way, lets try the real one >.>

Don't know why it didn't work, it's the exact same program. The only thing I took out was the PPC 2003 version so you wouldn't run that by mistake.
*edit - just downloaded it & it's missing the keygen. I don't know how that happened, sorry. I would've just linked to the original but I couldn't remember where I'd gotten it initially.

[ScottC]

You need more than just getspc.exe. It's a 2 file package;

The .exe file AND PPST_Keygen.dll.

I've uploaded it to Rapidshare here:
http://rapidshare.com/files/88594923/GetSPC.zip

Copy both of the files to your device (anywhere), and run it. In the first field (input) you enter your ESN (in hex), then generate the code.

On my mogul I enter ##3282# to enter the EPT menu, click "edit", then enter the code the tool generated.

Be sure to exit and reboot the edit menu correctly when you are done.

[Berserk87]

You need more than just getspc.exe. It's a 2 file package;

The .exe file AND PPST_Keygen.dll.

I've uploaded it to Rapidshare here:
http://rapidshare.com/files/88594923/GetSPC.zip

Copy both of the files to your device (anywhere), and run it. In the first field (input) you enter your ESN (in hex), then generate the code.

On my mogul I enter ##3282# to enter the EPT menu, click "edit", then enter the code the tool generated.

Be sure to exit and reboot the edit menu correctly when you are done.



yep, already got it, the one zaxdude posted worked :)

ty though.

[Berserk87]

all worked, runs great, thanks!:D

reflashed to the original telus rom, then went to the xp machine upstairs, re did everything i tried before.


-ran hard spl, which after words froze at bootloader, so i hard reset it, then it would start and lock on the splash screen.

-flashed nueROM v2 build 5022.

-flashed the 3.27 radio.


started it up worked perfectly, and after removing the cable it didnt crash or reset.

downloaded google maps, gps works great!
and the maps around my location were recently updated!
i can see my car parked outside our house with google maps on satellite images. :P

and its a nice clean rom so i have more free memory, even though i install most of the stuff to my flash card. :D

what other advantages would i get? wondering if im missing out of something :P