BETA: Extended Elf/Elfin Kitchen for WM6.1

[bepe]

Extended Kitchen for Elf/Elfin

Elfin base: New Elfin 2.xx
OS base: VF Kaiser UK 3.08.161.0 (Build 19199)

Completely rebuild the XIP section based on:
- Kaiser: MSXIPKernel, MSXIPKernelLTK
- Elfin: OEMXIPKernel
adjusted boot.rgu by adding the 19199 related changes
OEM packages except of OEMDrivers are clean 19199 packages



Requires the Microsoft Visual C++ 2008 Redistributable Package (http://www.microsoft.com/downloads/details.aspx?FamilyID=9b2da534-3e03-4391-8a4d-074b9f2bc1bf&DisplayLang=en)
Full XIP editing support
I've added a tool that removes the RGU's from the rom and moves all the DSM content to one DSM


Please read:
For the case that you are a cooking ROMs and getting donations for it, I would really appreciate a small donation,
cos I'm saving money for a new device. (I thing that would be fair :))

Download: ELFIN_DEV_v2.1_Build_19199.rar (http://rapidshare.com/files/89460226/ELFIN_DEV_v2.1_Build_19199.rar)

[maddream]

elfin rom not work on elf and viceversa, but I am not sure.Because there are some rom that can be used with elf and elfin.

[pkoper]

WORK IN PROGRESS

I would need some information and rom testers to create this Kitchen, cos I dont have this device (no device right now :()

First I would need to know if Elfin roms work on Elf?

That is good news....

The new 2.20.x.x Elfin ROMs work with both devices.

I asked swiftblade a while ago. It has something to do with the XIP.

[bepe]

That is good news....

The new 2.20.x.x Elfin ROMs work with both devices.

I asked swiftblade a while ago. It has something to do with the XIP.

ok, great :)

could someone try if this rom is booting on Elf/Elfin:
http://rapidshare.com/files/89216919/OS-ElfIn.rar

[bepe]

it is the final 19199 build... I know it is confusing, cos there exists 19521, 19716, but this one is much newer (much faster, more stable, not beta)... don't ask my what MS is doing with this numbers, I've looked into all this builds and non of those is fake (only the 20000 build was fake, but that was not even AKU1 :D)

[pkoper]

ok, great :)

could someone try if this rom is booting on Elf/Elfin:
http://rapidshare.com/files/89216919/OS-ElfIn.rar

I'll try after work

[Noonski]

Great to see You over here on the Touch side Bepe.

I'd be honoured to give tis a whirl.

Just came back from sabatical and vacation.

I was just looking for a new Base to Cook and test with anyways to, Great Timing.

Bepe You Da Man, I'm Downing Now let you hear soon.

[suracha]

First I would need to know if Elfin roms work on Elf?

I am using an Elf (Wasabi 64/128), I have flashed 2.20 ROM (for Elfin) for sometimes. It did worked on my Elf with the result that Program Memory became bigger than what it should be and extended over Storage Memory (less Storage Memory).

It also consumed higher memory.

BTW, it did work.

+++

There is one thing that I cannot do, I cannot make an OS.nb smaller than 50MB. It cannot be flashed to my Elf.

[Noonski]

I am using an Elf (Wasabi 64/128), I have flashed 2.20 ROM (for Elfin) for sometimes. It did worked on my Elf with the result that Program Memory became bigger than what it should be and extended over Storage Memory (less Storage Memory).

It also consumed higher memory.

BTW, it did work.

+++

There is one thing that I cannot do, I cannot make an OS.nb smaller than 50MB. It cannot be flashed to my Elf.

Correct 50MB is the Limit which should give you a pretty nice Big Storage Anyhoos.

[suracha]

Correct 50MB is the Limit which should give you a pretty nice Big Storage Anyhoos.

Yes, I known. I wish I can go lower than that.

[rvbcrs]

Nice work again bepe.!

Made sticky..

[Swiftblade]

@Bepe..It is great pleasure to see your wonderful kitchen at this forum..:D And yes, I can confirm that all the 2.20.xxx.xx ROMs work on both the ELFs and ELFins without any hitch.

I am downloading your Build 19199 now and will try it out after work....

@Noonski... Welcome Back! The ELF forum was never the same without you..:)

[suracha]

Already flashed OS-ElfIn to my Elf, it does work and it is much better than install Elfin 2.20 ROM on my Elf.

Camera doesn't work.

[tiggerbcn]

What pool does it have 4Mb or 8Mb???. Lately to those who we have ELF have us forgotten because 8Mb of pool it is great for us that our machine has few RAM, and nobody can say to me like to change the pool to 4Mb.
Thank you

[bepe]

Already flashed OS-ElfIn to my Elf, it does work and it is much better than install Elfin 2.20 ROM on my Elf.

Camera doesn't work.

Ok, thanks for testing :)
There are no apps installed on this rom, cos I'm not releasing an Elf ROM without having an Elf.
I'm just making a Kitchen the other ROM cooks can use.
This Kitchen is just a "perfect" port of the new OS and to add the OEM apps is job of the cooks.

What pool does it have 4Mb or 8Mb???. Lately to those who we have ELF have us forgotten because 8Mb of pool it is great for us that our machine has few RAM, and nobody can say to me like to change the pool to 4Mb.
Thank you

I dont know... to addjust that is also part of the ROM cooks :D



ok, so now that it is working it is time to upload the Kitchen

[bepe]

Upload done, happy cooking :D

[suracha]

Upload done, happy cooking :D

Great, Thanks.
Will try it today ...

[Noonski]

Bad Boy Bepe.

Now you got me cooking at work.

Checking it out.

[bram_smulders]

haha, this is nice Bepe!!

Finally a very clean kitchen to play with!!!
@ noonski: He gotme playing on my work also, damn cook/flash aholics!!:p

gr. bram

btw. is this wm 6.1?

[bepe]

haha, this is nice Bepe!!

Finally a very clean kitchen to play with!!!
@ noonski: He gotme playing on my work also, damn cook/flash aholics!!:p

gr. bram

btw. is this wm 6.1?

yes, it is WM 6.1. Build 19199, forget about the other WM 6.1 builds... this one is the newest one, more stable, much faster, not beta.

19716 Is beta build and very slow
19521 Is a very old build... I've known this build for about 4 months
191xx Also old and some of them beta
19400 Also new... but no idea what exactly that is... it is somehow different from the other build

19199 Is the new build ported from a leaked HTC Kaiser rom, it seams to be something like final AKU 1; Try it, it's very fast

I have no idea were all this builds higher than 19199 come from, but all of them are real and not fake numbers. So I'm thinking MS is working with different teams on this builds. Build 195xx 197xx seam to have a newer kernel, 191xx have newer SYS stuff, 19199 is the perfect one with new kernel and SYS

[Noonski]

I've been spoiled by anichillus.

Doctering out this small compact kitchen is something i don't have the time for at the moment.

At least i now have some of the missing rgu files i've been looking for from 6.1 roms

[bram_smulders]

I've been spoiled by anichillus.

Doctering out this small compact kitchen is something i don't have the time for at the moment.

At least i now have some of the missing rgu files i've been looking for from 6.1 roms

Missing rgu files?

[iii_see_tagpi_run_iii]

ok, great :)

could someone try if this rom is booting on Elf/Elfin:
http://rapidshare.com/files/89216919/OS-ElfIn.rar

the file has been deleted by the uploader....

[Noonski]

Missing rgu files?

Yeah i was either going to use Swift's or Cloudyfa's rom's as i haven't found any other 6.1 base but they don't rebuild dsm so i had no rgu files (i like to get my hands dirty). I don't need them but i just like to see them were they belong.

If there's anyone less lazy then me at the moment that is getting the hang of this compact kitchen, do tell.

[bepe]

the file has been deleted by the uploader....

That was just a test rom; it worked, so I deleted it and released the working Kitchen
http://rapidshare.com/files/89460226/ELFIN_DEV_v2.1_Build_19199.rar

by adding a big file to get over the MB limit and building a rom you would create an identical rom to the test rom. But don't boreder with it, it was an empty rom without any apps. This kitchen was made for ROM cooks to create a ROM.

btw, it includes some new base rom, newer than the one ElfIn 2.00.xx (I'm at university right now, so I can not look it up), so it really is interesting to use the one cos of the new driver and kernel version

[MrFunnycat]

Hey, Bepe. Can you upload the kitchen somewhere else? Rapidshare is down ATM.

[godgi3921]

i don't like new feature Threaded SMS in wm 6.1 (inbox), how i can do for change this to original sms(inbox) wm6.0

sum i like this wm 6.1 .

thanks.

[Piranha1]

Hey, Bepe THX from Germany.:D with Timbarland - Apologoze.mp3 ( 5mb filesize)work it on MDA Touch 64MB:D

[Noonski]

Very clean virgin Base.

I find it very it challenging kitchen/base.

I'm still going to be using 50-50% in conjunction with Hypercore.

But this is going to be like building the rom from the ground up, and i don't even need to take out the Cube.

And now i have to learn how to bring over the Needed/missing drivers for bluetooth and Wifi.

And maybe even learn how to make it 4 MB pagepool despite the wrong os.nb.

It's going to be fun.

[zeflash]

And now i have to learn how to bring over the Needed/missing drivers for bluetooth and Wifi.

And maybe even learn how to make it 4 MB pagepool despite the wrong os.nb.

It's going to be fun.

What, you mean the wifi / BT aren't working? Shouldn't that be part of a kitchen in the first place?

[Noonski]

What, you mean the wifi / BT aren't working? Shouldn't that be part of a kitchen in the first place?

Because i didn't have the required OEM folders prolly at work or i fucked up ;)

The kitchen comes without Full OEM folders for specific devices.

So not HTC Home or Cube or audio manager.

Anything Touch Specific you need to ad yourself.

Which i'm franticly working on right now.

Good one Bepe.

I tried re-extracting a rom i just made with your kitchen.

And it geve me a nice urprise.

Empty Package tool
and then a sys folder with a folder inside it.....

"BETA, make your own rom"

Very nice touch....

So any rom's cooked will not be recookable?


BEPEEEEH I love you.

Nice Kitchen really simple.

i'll keep working on making it Even more stripped then it already is and make it completly UC Compliant ;)

[Syrop]

Noonski +1

[Noonski]

Bepe doesn't have a touch so there is no way he can test Drivers and OEM folders anyway.

So i'm creating a mesh from different ROM's

With Bepe's permission i can upload a complete Kitchen with drivers so Cooks can test and make it perfect.

I'm not sure What Bepe's intentions are.

My question at the moment will the Rom be extractable after cooking?

Or is this a feature that will stay in the kitchen?



For those of you interested, i'm uploading a Pro version Of Bepe's Kitchen.

It has All the needed OEM files and some extra Packages.

There's no Tutorial but the set up is straight forward.

Run 01 then it will not run BUILDOS in auto mode so you can select your packages.
Run 02 Select the os-new.nb from the temp folder as OS file and then save the RUU-Signed into the main kitchen folder (one levelaboce the temp folder)
Run 03 to flash.

Side note Windows Live Messenger is not working.
I tried different packages but i think it has to do with something i fucked up in the OEM folders.
I'd like to test some more OEM folders from Different 2.2 builds to see if it makes any difference.

This is Far From Finished.

But this way everyone can help out getting everything to work correctly in the ROM, as i'm still looking for the best combination of OEM Folders and drivers to use.

Cube Has Been removed will make package for it.
HTCHome set to 6 tabs and includes Tabbsettings at Setting>Home>HTCHome.
One Note has been removed will make package for it.
Also Added VOIP, Modem Link and Remote Desktop as extra's
Changed initflashfiles.dat.
Merged some PROVXML files.
Removed taskerservstart service.
And removed all StartUIp files into StartUpDisabled folder.

So far everything seems to be working Dandy Bepe, doesn't look like a beta.

How to i change the directory OS-new.NB get's copied to?

I would like to get it into a folder that doesn't get deleted/empied everytime you run the batch, so i can put HTCRT.EXE in there with it and the Files to Flash.

And if there's anyone out there that can test this on an ELFIN?

It works on ELF.

I used 7-Zip's 7z format as that was the only one i found to get the whole thing under 100MB.

45%..... Waiting 100% Done. I'll remove the Upload in 24 hours.


Uploading

[zeflash]

Hmmm a ROM *without* the useless (to me) cube ... I wonder how much RAM there is with stripping out all the HTC stuff.
I really hope you'll be able to provide a "kitchen" where one will be able to get rid of those things according to their liking - given bepe's ROM doesn't have all that it could be possible I guess.

[Noonski]

Hmmm a ROM *without* the useless (to me) cube ... I wonder how much RAM there is with stripping out all the HTC stuff.
I really hope you'll be able to provide a "kitchen" where one will be able to get rid of those things according to their liking - given bepe's ROM doesn't have all that it could be possible I guess.


Oh i forgot to post the updated Beta to a Beta Kitchen here.

You will be able to get rid of a lot of crap indeed.

But ll do some testing on a 4 MB PP version this week.


http://rapidshare.com/files/90898327/ELFIN_DEV_v2.1_Build_19199_V0.3.7z

[Mr. Vi]

Oh i forgot to post the updated Beta to a Beta Kitchen here.

You will be able to get rid of a lot of crap indeed.

But ll do some testing on a 4 MB PP version this week.


http://rapidshare.com/files/90898327/ELFIN_DEV_v2.1_Build_19199_V0.3.7z


Hi Noonski!

I just started to pla with your ktchen, but I am having a big problem :D

When I run '01 Start Cooking.bat' there's appearing an error box saying "buildxip.exe has encountered an error".

Do you have an idea why this happens?

Greetings, vi

[Piranha1]

Hi Mr Vi Use this

http://www.microsoft.com/downloads/details.aspx?FamilyID=9b2da534-3e03-4391-8a4d-074b9f2bc1bf&DisplayLang=en

MFG Piranha

[pkoper]

Good evening

[Mr. Vi]

Hi Mr Vi Use this

http://www.microsoft.com/downloads/details.aspx?FamilyID=9b2da534-3e03-4391-8a4d-074b9f2bc1bf&DisplayLang=en

MFG Piranha

Thank you Piranha :) Works now!

Greetings, Vi

[Noonski]

Thank you Piranha :) Works now!

Greetings, Vi


Sorry About that.

This Kitchen is still based on Bepe's new version so this extra install also aplies to it.

Thanks to Syrop i'll be making a new Kitchen soon based on the old HyperCore version with some Modifications and 4MB pagepool for ELF devices. .NBH stays Extracktable.

Anyone can Help by submitting Packages for it.

As for this Beta Thread.

Bepe, there's nothing Beta Baout it for the ELF.
Still no ELFIN confirms.

[Piranha1]

Hi Noonski

:D:D:D:D: good Job

[pkoper]

Hi Noonski,

There is an issue with Taskmanager....

Where do we want to put the packages? I have a few I could add.

[porel]

Hi Noonski!! Nice job, thanks Bepe. I have selected all the packages that i can select to make the ROM that you have made Noonski but when it's dumping the registry fail, i have try dumping with the default selection and it's ok. I don't know where is the error, i will continue trying it. Sorry my english. Thanks!!

[Noonski]

Hi Noonski!! Nice job, thanks Bepe. I have selected all the packages that i can select to make the ROM that you have made Noonski but when it's dumping the registry fail, i have try dumping with the default selection and it's ok. I don't know where is the error, i will continue trying it. Sorry my english. Thanks!!

Yeah i think i encountered that one to and fixed the OS packages.

It didn't have an extra enter after the last line in a .RGU file.

It's easy to fix by Doind multiple runs of BUILDOS and finding which package it is then look for the folder in the sys folder and open the rgu file in that folder and add an extra blank line at the end.

Hi Noonski,

There is an issue with Taskmanager....

Where do we want to put the packages? I have a few I could add.

Yeah that's because i removed it but not the link in control panel.

Also fixed.

I think the attached package fixes that issue.

It goes into the SYS folder like any extra packages.

But you could also drop Packages into the OEM folder to.

BTW the attached package is for CU compliancy but somehow i broke Uatorun to run maybe someone can figure out what i did wrong, i've been to sick with huge headaches to figure out my mistakes.

Later on i'll add a seperate package for the new Taskmanager as selectable.

But hey why not post the packages you would want to add for the world to use ;)

[porel]

Yeah! i found the rgu that fail. Is 1dc3da02-499f-4547-9fd2-78cddfda9c62.rgu on Sim Tool Kit. I have make the change that you say me, add a blank line on the end and all correct. Perfect! I wanna make a Spanish ROM from this. Thanks You

[bram_smulders]

Yeah i think i encountered that one to and fixed the OS packages.

It didn't have an extra enter after the last line in a .RGU file.

It's easy to fix by Doind multiple runs of BUILDOS and finding which package it is then look for the folder in the sys folder and open the rgu file in that folder and add an extra blank line at the end.



Yeah that's because i removed it but not the link in control panel.

Also fixed.

I think the attached package fixes that issue.

It goes into the SYS folder like any extra packages.

But you could also drop Packages into the OEM folder to.

BTW the attached package is for CU compliancy but somehow i broke Uatorun to run maybe someone can figure out what i did wrong, i've been to sick with huge headaches to figure out my mistakes.

Later on i'll add a seperate package for the new Taskmanager as selectable.

But hey why not post the packages you would want to add for the world to use ;)

Noonski is back on the roll!!

I'll surely be using your modified kitchen when it's ready!!
gr. bram

[bytespider]

I may be the only one but...
At work my machine is set up to deafult to my developers sandbox. So running batch file in the Hypercore kitchen or Bepe's kitchens breaks.

A nice quick
cd %~dp0
does the trick...

ps. great work on the roms and kitchens guys... ima try mybest to contribute. :)

[Noonski]

I'll check the Batch files

Do you mean change

echo.
CD ROM
..\TOOLS\buildxip.exe -b
if not "%errorlevel%"=="0" goto error
CD..

into

echo.
CD ROM
..\TOOLS\buildxip.exe -b
if not "%errorlevel%"=="0" goto error
cd %~dp0

And This line

cd %~dp0

if NOT "%ALL%"=="1" pause
goto :EOF


Right??


I have no clue what the Frick it means but hey it still seams to be cooking in my kitchen so i'll leave it in for next release.

TNX..

I'm just a cook that never wrote his oen Batch files, and till three months ago never even knew you could edit them in Note Pad even though i knew almost anything could be edited in NotePad.

[bytespider]

yeah basically

cd %~dp0
change directory to the path of the currently running batch file - basically puts us into the right place before we try to do anything else. :)

Looking at your post again... just one at the top should do the trick... that way no matter where the files are the path will always be the path of the first executed batch :)

[shadabe]

hi frnds ,

i hav dwnldd the ROM , bt pls help me with the flashing process.. i m using blue rom 5.0

[mikeboogsd]

Mate I need help. I have all the files downloaded but do not know how to flash my htc touch.

Can anyone give me the htc touch flash instructions?

Thanks

[bytespider]

You should prob search harder - but http://forum.xda-developers.com/showthread.php?t=335631
will tell you how to cook the rom and then flash it.

Basically you get a ruu_signed.nbh which you then use the elf RUU tools to flash.

[Noonski]

This is not me being an A Hole.

But Both Kitchens say BETA.

Which means you sorta need to know what you are doing.

At a minimum that would be knowing about SPL HARDSPL SOFTSPL and flashing.

But the last Kitchen has everything you need to Flash an ELF.

Just start in Bootloader take out SD card then start RUU.

It's only OS anyway same as Elves 5.0
But Elves uses SoftSPL method as flash method. So you could just cupy the RUU_Signed.nbh to the Elves flash folder and give the RUU the same name the elves one is using.
(he's using a modified name for the .nbh)

Shit i gone and explained it anyway dammit.

Aaagh found the issue with CU Package.

It was mistake in a PROVXML file in OEMOPERATORS.
Remove the whole fricking PROXML File.

Remember: ProvXML files anywhere will overwrite any registry settings you put into RGU files.

[bytespider]

Maaaaaaaan!

Why didnt i realise about PROVMXML - if i had explored a lil more i would have realised that these files were more than binary files...

These files are the master setup files for the OEMs to set the phone and software how they like!

Sheeesh - now i feel enlightened!

[Noonski]

Maaaaaaaan!

Why didnt i realise about PROVMXML - if i had explored a lil more i would have realised that these files were more than binary files...

These files are the master setup files for the OEMs to set the phone and software how they like!

Sheeesh - now i feel enlightened!

Funny how i posted this on another thread and here also as a note to self to remove it from kitchen at home.

And i get three people that actually were sort of having an issue with it.

[Noonski]

Allow me,

Can BuildOS.exe being modified to allow using Radio, apart from CheckBox?

If it worked the way Radio work, we can add multiple OEMs that will be used only one in that group.

Or yes this would also save some extra work?

I'll try the PM to the Real Main MAN later on.

[Noonski]

Now this could be my own stupid fault.

But i have checked the RGU files in question.

And it seams that some values don't get taken over into rom from some specific rgu file.

I checked if they were ANSI or UNICODE but that doesn't seem to be the issue.

It's just weird.

33b68280-d8ed-11dc-95ff-0800200c9a66.rgu

Is ignored.

and

15502034-8f17-11dc-8314-0800200c9a66.rgu

isn't

Now i checkd othet packages and PROVXML files for double entries but couldn't find then.

Maybe it's just me but maybe someone has had the same issue using this new kitchen.

But i think i propably oversaw the values somewhere because even when i made PROVXML files out of the RGU ignored it still did not go over into rom.
Maybe i'm just lazy.
Maybe it doesn't like RGU files with 666 bytes ;)

[ababrekar]

guys i need help in using bepe's kitchen. i have downloaded that kitchen (couldnt download noonski's kitchen as the file is deleted by uploader) in bepe's kitchen the oem and sys and rom folders are already filled in, so where do i make a dump of my os.nb file that i have on my device currently. i was thinking that since mine is a shipped rom (recently bought this beauty ElfIn :)) i'll work on my rom and add or delete packages :) please guide me on how to go about on this one. should i simply delete bepe's oem, sys and rom folders, dump and package my rom through hypercore and build os? then how will i get wm6.1? or should i just replace bepe's .vm folder with mine and do g'reloc? please any help would be highly appreciated. thanks to all in advance

this beauty is already cid unlocked through pof's tools and my shipped rom is backed up too (i mean i have the final .nbh file which i can extract to get the nb files)

[GPRS]

guys i need help in using bepe's kitchen. i have downloaded that kitchen (couldnt download noonski's kitchen as the file is deleted by uploader) in bepe's kitchen the oem and sys and rom folders are already filled in, so where do i make a dump of my os.nb file that i have on my device currently. i was thinking that since mine is a shipped rom (recently bought this beauty ElfIn :)) i'll work on my rom and add or delete packages :) please guide me on how to go about on this one. should i simply delete bepe's oem, sys and rom folders, dump and package my rom through hypercore and build os? then how will i get wm6.1? or should i just replace bepe's .vm folder with mine and do g'reloc? please any help would be highly appreciated. thanks to all in advance

this beauty is already cid unlocked through pof's tools and my shipped rom is backed up too (i mean i have the final .nbh file which i can extract to get the nb files)

the oem you can fill your WWE's packages.but if you check ,u will find that the bepe's OEMdiriver is newer than WWE.so you can choose your OEM.

[ababrekar]

the oem you can fill your WWE's packages.but if you check ,u will find that the bepe's OEMdiriver is newer than WWE.so you can choose your OEM.

hi gprs.. nice name :D please post ur guide in a lil bit more detail.. better if u answer point wise :)

1. should i simply delete bepe's oem and rom folders, dump and package my rom through hypercore and buildos?

2. then how will i get wm6.1?

3. or should i just replace bepe's .vm folder in sys with mine and do g'reloc and then run buildos?

although if u see bepe's sys folder, u wont find irda, windows live or a few packages that are in my shipped rom. can i just add them in bepe's sys?

[GPRS]

hi gprs.. nice name :D please post ur guide in a lil bit more detail.. better if u answer point wise :)

1. should i simply delete bepe's oem and rom folders, dump and package my rom through hypercore and buildos?

2. then how will i get wm6.1?

3. or should i just replace bepe's .vm folder in sys with mine and do g'reloc and then run buildos?

although if u see bepe's sys folder, u wont find irda, windows live or a few packages that are in my shipped rom. can i just add them in bepe's sys?

hi,
1\I think u shouldn't do it.but u should fill the oem by yourself,and build your rom.
2\the bepe's kitchen has the all wm6.1 .but the oem.
so I think u should use the bepe's kitchen .u can add some driver if u need.but the 'rom' u shouldn't delete it,because the XIP in it.and if u has the WWE rom,u can dump it by hypecore,and u can compare the WWE and Bepe's SYS and OEM.
Oh ,so ... I'm not american and my english is so poor.

[ababrekar]

hi,
1\I think u shouldn't do it.but u should fill the oem by yourself,and build your rom.
2\the bepe's kitchen has the all wm6.1 .but the oem.
so I think u should use the bepe's kitchen .u can add some driver if u need.but the 'rom' u shouldn't delete it,because the XIP in it.and if u has the WWE rom,u can dump it by hypecore,and u can compare the WWE and Bepe's SYS and OEM.
Oh ,so ... I'm not american and my english is so poor.

no problems about ur english brother :) but ur answer and guidance is still unclear..

can someone explain in detail how to use bepe's kitchen? i wish to retain the basic look of touch, yet i want to have wm6.1. this is a simple request or a simple question. can anyone please guide me on this step by steps? atleast the basics. i dont wanna screw up my new baby here. or atleast if anyone can tell me whether wrongly created os.nb file can brick my phone? or i can still manage to flash the shipped rom back on it?

would a rom created in this kitchen retain the functioality of biotouch and touchflo as it is in touch xl?

[ababrekar]

Dudes... There's something really really wrong with this kitchen :eek:

Below is a complete info for Bepe and other experts. Correct me if I'm wrong

Procedure:

Dumped the shipped ROM into OS.nb through Hypercore
Extracted the OS.nb into dump through Hypercore
Packaged the dump into OEM & SYS folders through Hypercore
Copied everything except OEMVersion from dumped Hypercore to the Kitchen OEM folder (had to owerwrite some files though)
Left the Kitchen SYS & ROM folder as is (only added Windows Live, Autoupdate and IRDA folders from Hypercore to this Kitchen)
Executed the batch file. Everything completed without any errors
Created the RUU_Signed.nbh file through HTCrT and flashed to my device (completed without any errors)Problems (after device start):

Blue LED keeps blinking for no reason (Bluetooth is off, WiFi is off)
Commanager doesnt work (shows error "Error while reading commanager settings...")
Touchpad & Touch Keyboard is missing
Device Information is missing from settings
Cant run network wizard that came with the shipped ROMHope Bepe, Noonski or any expert replies to this and tells us what is going wrong. This is the reason why I am asking for a guidance in previous so many posts

[Noonski]

Thread

http://forum.xda-developers.com/showthread.php?t=368588

Links in Post 2, 3, 4 & 5 have been rechecked.

Sorry about the wrong link in 3.

Yes the issues you are mentioning are part of trying to use XIP from other ROM dump.

WM6.1 has had some driver updates.

I pubmed into the same issues trying to either port Hypercore dump into bepe's kitchen and the other way round.

That's why i have added SYRXIP because if anyone gets that XIP (ELF ONLY) info into Bepe's kitchen we can start making 4 MB PP ELF roms with WM6.1 imagine the memory.

Sorry for the confusion and sorry i can't give anwser for your previous posts.

It's not that i gave up on Using different XIP it's just set to Lower Priority.

Was focusing on SPC rom first.

And the last two hours the uploaded Files are almost outdated.

Figure the same thing out as Cloudyfa propably.

WM5Torage 1.75 is better choice in WM6.1 it's working and added to SYS folders (not in the uploaded version have to test for a while)

Today Agenda is also back in the SYS folder Update.

Bepe ONly Posted the kitchen others had to Duckt tape the missing pieces back.

And my ROM looks to be the proof the wright missing pieces are in there.

Tools can be added Folders can be cleaned up or rearanged.

Just post suggestions or Files.

Touch Keyboard wasn't in there.
Luckily...

If it was in there i would have removed it with PAckage in sys folder but it's not there.

I never really missed that Memory Leaking *&^^ spell correcting interfering.
My opninion.
Touchpall does a much better job.

[ababrekar]

Was focusing on SPC rom first.

Touchpall does a much better job.

ok. but what about

Commanager doesnt work (shows error "Error while reading commanager settings...")
Touchpad & Touch Keyboard is missing
Device Information is missing from settingsi love using touchpad and touch keyboard and would prefer these over anything else anytime :) please guide me to a base wm6.1 kitchen (sys folder) and like i said i'll use the oem, rom, xip from my stock rom. it kind worked for Gene why cant it work for Touch XL? it possible right? and also someone guide me on which are the drivers in my sys folder to be copied to the base wm6.1 sys folder for getting the 3 items above

p.s: what is SPC rom?

[Noonski]

Clean Sys folder is in Bepe's original post.

http://rapidshare.com/files/89460226/ELFIN_DEV_v2.1_Build_19199.rar

I didn't copy over The OEM folders from another rom.

I compared all the RGU files and added all missing info from other ROM"S (muiltitude)
I also compared all the files in OEM And replaced some files and added a few.

OEM was really just a very empty OEM.

Device Information will be in Bepe's kitchen.

Which comm manager did you choose?
So i can recheck that package this way i don't need to check all three commmangers in the SYS folder.

Are you cooking in HyperCore or Bepe's?

[ababrekar]

Clean Sys folder is in Bepe's original post.

http://rapidshare.com/files/89460226/ELFIN_DEV_v2.1_Build_19199.rar

I didn't copy over The OEM folders from another rom.

I compared all the RGU files and added all missing info from other ROM"S (muiltitude)
I also compared all the files in OEM And replaced some files and added a few.

OEM was really just a very empty OEM.

Device Information will be in Bepe's kitchen.

Which comm manager did you choose?
So i can recheck that package this way i don't need to check all three commmangers in the SYS folder.

Are you cooking in HyperCore or Bepe's?


i have mentioned my steps clearly in my post my brother :) i cooked the final build in bepe's kitchen. i just copied the oem folder from my stock rom and deleted transcriber from bepe's sys and add windows live in bepe's kitchen

doesnt work :(

[Noonski]

If you delete Bepe's OEM folder and replace it with your own you will miss some new dll's and exe files and rgus files.

Lay the folders next to each other and merge RGU files by looking at the differences.

Replace your old exe files and dll's by the new ones etc etc.

Overwriting didn't work for me the first time.

But i have to leave now sorry.

[ababrekar]

If you delete Bepe's OEM folder and replace it with your own you will miss some new dll's and exe files and rgus files.
Lay the folders next to each other and merge RGU files by looking at the differences.
Replace your old exe files and dll's by the new ones etc etc.
Overwriting didn't work for me the first time.
But i have to leave now sorry.

fine. tell me something. did u see swiftblade's blue rom v5 here? http://forum.xda-developers.com/showthread.php?t=364901. it is amazing. that is exactly the rom i am looking out for. unfortunately i reverted back to shipped rom because he has deleted these packages from it

Touch Keyboard + Keypad
Symbol Pad
Hibernate 1.4

and these are the packages which i extensively use daily. i have nobody to guide me how to edit his rom in bepe's kitchen (i have already dumped the rom with oem, sys and rom with xip folders through hypercore)

bepe has a rom folder in his kitchen with os.nb.payload file and other xip files too. should i just retain the rom folder with all contents in bepe's kitchen and use the oem and sys from swiftblade's rom and execute the buildnb batch file? will that work? coz i already tried that and after flashing, the device never goes beyond smart mobility screen. noonski, brother please help me. i really wanna use swiftblade's rom coz he has retained all the functions of elfin which is amazing but also i want to add the those three packs to it and flash. help me if u can or someone, anyone

bepe?

[Noonski]

fine. tell me something. did u see swiftblade's blue rom v5 here? http://forum.xda-developers.com/showthread.php?t=364901. it is amazing. that is exactly the rom i am looking out for. unfortunately i reverted back to shipped rom because he has deleted these packages from it

Touch Keyboard + Keypad
Symbol Pad
Hibernate 1.4

and these are the packages which i extensively use daily. i have nobody to guide me how to edit his rom in bepe's kitchen (i have already dumped the rom with oem, sys and rom with xip folders through hypercore)

bepe has a rom folder in his kitchen with os.nb.payload file and other xip files too. should i just retain the rom folder with all contents in bepe's kitchen and use the oem and sys from swiftblade's rom and execute the buildnb batch file? will that work? coz i already tried that and after flashing, the device never goes beyond smart mobility screen. noonski, brother please help me. i really wanna use swiftblade's rom coz he has retained all the functions of elfin which is amazing but also i want to add the those three packs to it and flash. help me if u can or someone, anyone

bepe?

Well the keyboard packages has been on FDA for 3 months now to start with the cooking class thread Post 5
http://forum.xda-developers.com/showpost.php?p=1572777&postcount=5

Or different versions here.

http://forum.xda-developers.com/showthread.php?t=344533

Or here

http://forum.xda-developers.com/showthread.php?t=336587

Symbol Pad aah Yep your right i haven't had the time to repacke those files correctly but all you need is in the SYS folder SYMBOLPAD in the Sys folder i have uploaded. Just set the option.xml to true i think im got all registry keys in there.

Now hybernate..
Where was that again... dammit

Well i can't reacht it now but A patched version can be extracted from Cloudyfa's 2.0 rom. It all depends on how badly you want it.

But it takes 5 minutes and it will be inside a cloud_folder if i remember correctly.

I never made a packages for that because i'm lazy and use Quickmenu's hybernate function.

But you only need the exe file.

And then you can make the Package yourself i think most info is on the cooking class thread.

[pkoper]

Here"s an oem for oxios tools

[Noonski]

Here"s an oem for oxios tools

TNX PKoper downloaded and added to my sys folder. Now let me check on Vi's error.

[Mr. Vi]

TNX PKoper downloaded and added to my sys folder. Now let me check on Vi's error.

Great :)

Vi

[ababrekar]

Bepe, you and your sweet kitchen rock :cool:
Noonski, you and your amazing beautiful packaged options are so cool :cool: makes cooking a piece of cake
Cloudyfa :cool: the man who showed me a way to use Kaiser SYS. Thanks brother

I managed to cook a WM6.1 ROM for my sweet ElfIn (128\256) Attached are the screenshots (need some tweaking and some corrections in a few apps though) I think I must have screwed up the theme files, will correct, no big deal (check the main screen) But the rest of core is working great

I used only the tools and ROM folder from your kitchen. Used SYS from Kaiser WM6.1 ROM and OEM from my shipped ROM. Added value advantage packages from Noonski's cooking classes. Added a few packages of my own. Finally I have only the standard keyboard and the Touch kayboards (just the way I wanted)

Going to now hunt for smart programs and add them in my ROM. Although now I am going to learn about the XIP thingy in Bepe's kitchen

I wish to use this space to thank everyone who have put up with my constant questions and gave me guidance all the way. You guys are the best assets of XDA

Bepe
Noonski
Cloudyfa
Gullum

Sometime later when I'm done with my perfectly personalised, I will surely post the steps I took so it will be easier for learners (like me :)) to understand

FINALLY I have managed to cook a successful WM6.1 ROM for my ElfIn with stuff that only I want. Now I will surely post my steps so its is easier for others to follow. Still thanks to above experts. You can check the screenshots here: http://forum.xda-developers.com/showpost.php?p=1983958&postcount=83

[Noonski]

Congrats.

But the Sys folder in the original Version posted by Bepe was allready the kaiser SYS.

Persistence is you best friend to learn.

[ababrekar]

But the Sys folder in the original Version posted by Bepe was allready the kaiser SYS

thnx bro :) i thought bepe had edited the sys folder by removing some items, so i re downloaded the rom and extracted the sys out of it..

did he edit something out of it originally?

[ababrekar]

-- Recalled --

[ababrekar]

-- Recalled --

[sonixpl]

I am looking as well how to change lang :) I know sth about emu but it is not working ;| Can sbdy be such willing to write it again from scratch ?

[ababrekar]

-- Recalled --

[Noonski]

bepe, noonski. am i getting a cold shoulder here or are u guys busy with something else?? please help me i solving this problem. rest all is ok. are there any files or folders that need deleting from your sys folder to make it work with my elfin shipped oem folder? i'm trying to get this work without any editing. combine both folders with ur rom folder and simply cook a wm6.1 rom with shipped packages from oem. hope one of u can solve this problem

has anyone managed to cook a rom for elfin (128\256) successfuly in this kitchen so far?

Have you teste mY SPC rom?

That seems to run on ELFIN.

But i thought you where allready succesful?

Ehy can you check if you have a ceipui.exe folder in the sys folder?

If so you need a different one.

[ababrekar]

-- Recalled --

[ababrekar]

yes, there is a ceipui folder with ceipui.exe file in it in sys/shell. where can i find a "different one now" i mean which rom should i pick it up from? should i use this folder that came with my shipped rom?


i finally managed to cook a customised rom through this wonderful kitchen :) (images attached) will reply on my earlier post so it will be easier for others (or learners like me) to follow

noonski - now i can say that i have managed to successfuly cook a wm6.1 rom for my elfin :D thnx i used the ceipui folder from my shipped rom (although i dont know what it does)
bepe - wonderful kitchen. thnx :D

Update: This ROM has been stripped down a bit. I have removed the home plugin, transcriber, windows live, images, themes (only included are black flowers & wm aurora) and with red touch style gfx

Consider this as open source and free to use. Click to DOWNLOAD (http://rapidshare.com/files/97787379/Ameet_B_V_Final.rar.html)

[Noonski]

i finally managed to cook a customised rom through this wonderful kitchen :) (images attached) will reply on my earlier post so it will be easier for others (or learners like me) to follow

noonski - now i can say that i have managed to successfuly cook a wm6.1 rom for my elfin :D thnx i used the ceipui folder from my shipped rom (although i dont know what it does)
bepe - wonderful kitchen. thnx :D

just had 2 questions :confused: -
1. how do i get rid of the in built block recognizer sip? i find it very stupid
2. how do i change the internal name of the rom? what is seen in the device information?

and for my information - what does the sqm folder do and what does catalogue folder do?

The error messages you got rang a bell when i was trying to remove ceipui fully from the system and SQM which isn't possible yet.

But it was a weird mistake i made.

I found the folder also in my own Sys folder it belonged in the Shel or OS folder but without the DSM file.

The weirdest part is that it had no effect on my own Cooks.
I also had the incorrect folder but the ROM worked.

So you actually helped find a bug in my SYS folder.

Pfew. I'll update the correct SYS folder in two days. So let's indeed hope someone reads all of this.

[ababrekar]

The error messages you got rang a bell when i was trying to remove ceipui fully from the system and SQM which isn't possible yet.
But it was a weird mistake i made.
I found the folder also in my own Sys folder it belonged in the Shel or OS folder but without the DSM file.
The weirdest part is that it had no effect on my own Cooks.
I also had the incorrect folder but the ROM worked.
So you actually helped find a bug in my SYS folder.
Pfew. I'll update the correct SYS folder in two days. So let's indeed hope someone reads all of this.

Glad to be of some help with my constant complaining :D Can u please tell me which files or folders to be removed for removing the Block Recognizer and Text Recognizer? I think even that will save memory, right?

Is OEM the storage memory & SYS the program memory in device information? Did you see my screenshots? Please do and let me know if anything needs to be further reduced for saving more memory

@everyone. Listing a few steps I took while cooking in this wonder kitchen

Copy the OEM folder from your ROM
Copy the ROM & SYS folders from Bepe's kitchen
Replace the "ceipui" folder from Bepe's SYS with your folder (from your ROM) (till noonski repairs the sys folder :))
Delete or add any packages that you like or dislike (dont proceed if you dont know what you are doing. I will not be responsible if you brick your device)
After adding / deleting your ingredients, run Buildnb .bat from Bepe's kitchen
Create RUU_Signed.nbh with HTCrT and flash and enjoy the new system :)

[ababrekar]

just had 2 questions :confused: -
1. how do i get rid of the in built block recognizer sip? i find it very stupid
2. how do i change the internal name of the rom? what is seen in the device information?

and for my information - what does the sqm folder do and what does catalogue folder do?

any answers yet my brothers? anyone, someone?

[ababrekar]

found one more thing in this kitchen.. i used my shipped oem folder.. the shipped htc home plugin works great but the plugin cant get configured by home customiser. i did the reg hack but can get it to show more tabs than what it shows in the screenshot (attached) i have the kaiser htc home plugin v2 but dont know which files to delete to use this plugin and which rgus to edit for this. hope to read a workaround on this one guys. tried every trick in the book. deleted almost all files currently using the built in plugin (must ve missed one or something) please help

m planning to load ultimate launcher and have the home plug within it but doesnt work

[flaviopac]

How can i translate a rom??

I've the italian directories of WM 6.1: OEM and SYS...

Now how can I edit the directories of this rom or any other one??


Thank you....

[ababrekar]

found one more thing in this kitchen.. i used my shipped oem folder.. the shipped htc home plugin works great but the plugin cant get configured by home customiser. i did the reg hack but can get it to show more tabs than what it shows in the screenshot (attached) i have the kaiser htc home plugin v2 but dont know which files to delete to use this plugin and which rgus to edit for this. hope to read a workaround on this one guys. tried every trick in the book. deleted almost all files currently using the built in plugin (must ve missed one or something) please help

m planning to load ultimate launcher and have the home plug within it but doesnt work

i want to delete the built in htc home plugin and cook the kaiser plugin with the settings tab. please tell me which files or folders to be deleted.. thnx

[flaviopac]

Please could someone explein me hot to dump (in particulary) the folders OEM and SYS (and all the other folders) from Windows.nb??


Many thanks.....


:confused::confused::confused:

[Noonski]

i want to delete the built in htc home plugin and cook the kaiser plugin with the settings tab. please tell me which files or folders to be deleted.. thnx

I'm not sure this thread is the place to ask.

But again i know which thread allready holds the anwser.

You put you Package in the sys folder.
Run buildos then delete any double files it finds in OEM folders or other sys folders.

Again the six tab HTC home can be found on many threads inculding class where this post belongs.


As to different languages.

It's no magic. Yes your method works but the best way is the hard way.
Replace 0409 files with yours and also change all Shortcuts to correct path and initflashfiles and rgu's hive files.

I never done it maybe because of not having the patience.

But the way i'm working on my own kitchen all the registry settings are getting more and more together so finding and changing them will be a lot easier.

But before i'm that far. You propably are of to getting to now the ROM inside out.

Which is good.

This thread is or better yet was in origin to see if the kitchen worked allright on ELF and ELFIN.

Which it does.

It needed to be sticky for that.

But Cooking issues just belong in the class thread.

Not just me but other "graduates" pop in on that one.

They don't always check each and every thread from a fellow cook.

At the moment it looks like most cooks have chosen to take some rest.

Which i think is a good thing, because most of them started to cook because quite simply there wasn't that much choice on Touch ROM's

All the information can be found in the threads.

If not try Anichullus Pro Core Kitchen in Wizard thread.

But most important just read them.

These questions have been asked and anwsered many times before.

[ababrekar]

I'm not sure this thread is the place to ask.

But again i know which thread allready holds the anwser.

You put you Package in the sys folder.
Run buildos then delete any double files it finds in OEM folders or other sys folders.

Again the six tab HTC home can be found on many threads inculding class where this post belongs.


As to different languages.

It's no magic. Yes your method works but the best way is the hard way.
Replace 0409 files with yours and also change all Shortcuts to correct path and initflashfiles and rgu's hive files.

I never done it maybe because of not having the patience.

But the way i'm working on my own kitchen all the registry settings are getting more and more together so finding and changing them will be a lot easier.

But before i'm that far. You propably are of to getting to now the ROM inside out.

Which is good.

This thread is or better yet was in origin to see if the kitchen worked allright on ELF and ELFIN.

Which it does.

It needed to be sticky for that.

But Cooking issues just belong in the class thread.

Not just me but other "graduates" pop in on that one.

They don't always check each and every thread from a fellow cook.

At the moment it looks like most cooks have chosen to take some rest.

Which i think is a good thing, because most of them started to cook because quite simply there wasn't that much choice on Touch ROM's

All the information can be found in the threads.

If not try Anichullus Pro Core Kitchen in Wizard thread.

But most important just read them.

These questions have been asked and anwsered many times before.

WOW!! :eek: sorry brother for the right post in the wrong thread :) sorry again.. i got the answer in your long post though.. thnx

[ababrekar]

Guys, the SYS folder in the kitchen doesn't have default.hv & user.hv. Where can I find these files? I wanted to know this cause i wanna edit the registry while cooking rather than flash and then edit

[pkoper]

they should be in the XIP folder

[ababrekar]

they should be in the XIP folder

nope there is only boot.rgu in xip folder. wonder from where the dump creates these files from

[pkoper]

nope there is only boot.rgu in xip folder. wonder from where the dump creates these files from

What are trying to do? Change?

You might be comparing two different kitchens here.

[Noonski]

User and default hives are in metadata folder in SYS.

Good Morning

[pkoper]

User and default hives are in metadata folder in SYS.

Good Morning

Good morning....

[iii_see_tagpi_run_iii]

i cant seem to run bepe's kitchen each time i run buildnb... something about failing to initialize properly? pls help.. i have already installed vcredist_x86 but it still shows the same problem

[Noonski]

i cant seem to run bepe's kitchen each time i run buildnb... something about failing to initialize properly? pls help.. i have already installed vcredist_x86 but it still shows the same problem


Vista ? Xp?

And maybe you have a screen?
OR wait.

Here's the one i use myzelf.

[iii_see_tagpi_run_iii]

Vista ? Xp?

And maybe you have a screen?
OR wait.

Here's the one i use myzelf.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@echo off
SET ALL=1

echo.
echo Creating 'dump' folder...
TOOLS\BuildOS.exe
echo.
echo Done!

REM ================================================== =========================================

echo.
CD ROM
..\TOOLS\buildxip.exe -b
if not "%errorlevel%"=="0" goto error
CD..

REM ================================================== =========================================

echo.
TOOLS\G'Reloc.exe -doit -dump
if not "%errorlevel%"=="0" goto error

REM ================================================== =========================================

echo.
CALL TOOLS\CreateROM.bat

pause
goto :EOF

:error
echo.
echo ERROR! (errorlevel: %errorlevel%)

>>>>> im using xp... pls help

[Noonski]

What i meant is rightclick the .bat file and replace the script with...


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~





@echo off
SET ALL=1

echo.
echo Creating 'dump' folder...
TOOLS\BuildOS.exe
echo.
echo Done!

REM ================================================== =========================================

echo.
CD ROM
..\TOOLS\buildxip.exe -b
if not "%errorlevel%"=="0" goto error
cd %~dp0

REM ================================================== =========================================

echo.
TOOLS\G'Reloc.exe -doit -dump
if not "%errorlevel%"=="0" goto error

REM ================================================== =========================================

echo.
CALL TOOLS\CreateROM.bat

pause
goto :EOF

:error
echo.
echo ERROR! (errorlevel: %errorlevel%)





~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


And also what is the entire message and when.

Good morning....

What went on in Surface thread?

I'm going to sleep early tonight and tomorow i start rebuilding OEM and SYS folders from scratch again to simplefy languages.
You MSN?

[iii_see_tagpi_run_iii]

did the right click and replaced the script as told.. still the same error. each time i run the builnb, a window pops up saying "Creating 'dump' folder..."only then an error window also pops up "The application failed to initialize properly (0xc0000135).Click on OK to terminate the application..

[Mr. Vi]

Have u got installed .NET Framework 2.0 on your machine? I had this error, wehn i was running my pc without it!

Vi

[iii_see_tagpi_run_iii]

Have u got installed .NET Framework 2.0 on your machine? I had this error, wehn i was running my pc without it!

Vi

>>>>>> i forgot i reformatted my pc last week and i didnt install it.. thank u.... the kitchen works now :)

[iii_see_tagpi_run_iii]

sorry for really being a noob in my posts but id like to ask what files do i need to be included in cooking a rom to have the cam, bluetooth wifi work? (using bepe's files attached with the kitchen)

[ababrekar]

User and default hives are in metadata folder in SYS

nope brother.. the hives are not seen in my sys\metadata folder.. if i check the folder size of metada it shows 838kb but opening it, it shoes only a dsm file (1kb) and some rgu file (3kb). my folder options are sent to show hidden & all files. dont know how do i see those two files. all i wanna do is try and change the settings right at begining which i normally do after cooking and flashing. hope you can help out in this. i am cooking on xp

[iii_see_tagpi_run_iii]

sorry for really being a noob in my posts but id like to ask what files do i need to be included in cooking a rom to have the cam, bluetooth wifi work? (using bepe's files attached with the kitchen)

>>>>> found it! pls ignore my querry.. thank to all :D

[pkoper]

nope brother.. the hives are not seen in my sys\metadata folder.. if i check the folder size of metada it shows 838kb but opening it, it shoes only a dsm file (1kb) and some rgu file (3kb). my folder options are sent to show hidden & all files. dont know how do i see those two files. all i wanna do is try and change the settings right at begining which i normally do after cooking and flashing. hope you can help out in this. i am cooking on xp


enable show system files

[Noonski]

>>>>>> i forgot i reformatted my pc last week and i didnt install it.. thank u.... the kitchen works now :)

Ha,.. sorry i'm not making fun of you.

But see Vi it's not bad to post your mistakes.
http://forum.xda-developers.com/showpost.php?p=1976323&postcount=44
Yes it's another thread but still shows reading is fun.

As no one reads them anyway.

Ghehehehe.

PKoper:
I'm going to start slowly right now.
First i will Merge Bepe's Kitchen with another 2.26 Base that i don't know where i got that allready has 6.1 files in it. It's either Hnubli's or Syrups.

Then i will check all RGU files in OEM folders and move each and every line that needs to be translated to any other language into the OEM_Lang_0409 folder.
Some goes for MUI files but these are allready in the correct folder.

Then i will take out all lines that need translation from user.hv and default.hv and also but these into the OEM_Lang rgu file. Once i have done this i will upload this folder and you can start replacing the MUI files and translate the RGU files.
I will add an option/xml file to the OEM_LANG folder so you need to get a new UID for the german version.

In the new lay out i'm going to place custom packages into the OEM folder as the SYS folder will eventually be packed with Many languages only SYS packages.

Let's start with OEM_LANG and see how long that takes.

Any one that wants to do another language is welcome.

Trust me this is going to work.

So i'm of to merge the needed files.

I am looking as well how to change lang :) I know sth about emu but it is not working ;| Can sbdy be such willing to write it again from scratch ?

Great Idea. What is your language?
And does it have an official ROM out with at least a 2.20 version?

[iii_see_tagpi_run_iii]

:D:D sir what would should i do before cooking the rom so as i can disable the biotouch? hoping that each time id have the sliding up gesture on the phone, the biotouch would not be activated? what file should i remove/add to do so? thanks in advance.....

Damn...didnt sleep... flashing and cooking..

[Noonski]

:D:D sir what would should i do before cooking the rom so as i can disable the biotouch? hoping that each time id have the sliding up gesture on the phone, the biotouch would not be activated? what file should i remove/add to do so? thanks in advance.....

Damn...didnt sleep... flashing and cooking..

If you download the Sys package in my Super Pro Core Kitchen.

You would find a package with


[HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings]
"EnableCube"=dword:0

to disable cube swipe.

[iii_see_tagpi_run_iii]

If you download the Sys package in my Super Pro Core Kitchen.

You would find a package with


[HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings]
"EnableCube"=dword:0

to disable cube swipe.

>>>> sir im still using bepe's and i ported some apps from other roms and now i also seem to have the cube without the intention of installing it. ill try to download your rom .. thank you in advance

[iii_see_tagpi_run_iii]

>>>> sir im still using bepe's and i ported some apps from other roms and now i also seem to have the cube without the intention of installing it. ill try to download your rom .. thank you in advance

>>>ooops sorryyy, all i have was your rom, i didnt have the chance to download the kitchen as it was already deleted..

[Noonski]

It shoulnd't be look for the SYS download in Super Pro Core Thread.

[ababrekar]

enable show system files

Originally Posted by ababrekar
nope brother.. the hives are not seen in my sys\metadata folder.. if i check the folder size of metada it shows 838kb but opening it, it shoes only a dsm file (1kb) and some rgu file (3kb). my folder options are sent to show hidden & all files. dont know how do i see those two files. all i wanna do is try and change the settings right at begining which i normally do after cooking and flashing. hope you can help out in this. i am cooking on xp


thnx pkoper. i knew someone would say this. thats why i had mentioned in my post that folder option are set to show all files yet i cant see those files

noonski - any help in this brother? can someone post those two files from this kitchen here?

[pkoper]

thnx pkoper. i knew someone would say this. thats why i had mentioned in my post that folder option are set to show all files yet i cant see those files

noonski - any help in this brother? can someone post those two files from this kitchen here?

not just hidden & all files... a bit further down is an option to show system files

[ababrekar]

not just hidden & all files... a bit further down is an option to show system files

thanks brother. sorry, my bad.. got it to work.. didnt see the sys files check :) thanks again. now how do i convert thr hives to rgu files for editing?

[pkoper]

The anichillus kitchen has a tool for this

[ababrekar]

The anichillus kitchen has a tool for this

thnx brother.. found it.. do u know which htc home plugin works perfectly with rom cooked in this kitchen? coz i ve tried to use the 1.6 & 2.1 version both. although they do show up but cant do any customisation. i mean the contacts tab doesnt show up no matter what

[pkoper]

don't have all my stuff here at work, but I am quite sure that this one works

http://rapidshare.com/files/97933506/000_HTC_HomePlug_2.1.1005.722_Patched.zip

[ababrekar]

don't have all my stuff here at work, but I am quite sure that this one works

http://rapidshare.com/files/97933506/000_HTC_HomePlug_2.1.1005.722_Patched.zip

thnx again brother. do u know how to make a cab out of it? or if u can post the cab.. i would rather install the cab first just to check than to cook flash and find out that it doesnt work :)

[pkoper]

wince cabmanager would be my guess but I only ever used it to do the reverse....

whats wrong with cooking and flashing?

I sometimes flash 10 to 20 times a day to get something working.

[Noonski]

FLASH ADDICTS ALERT.

hehe Same her'.

I actually enjoy flashing a bad rom.

Because it freezes up or gives me errors and make me stressed and keep on cooking till i should actually wake up.
But the version koper posted works.

[iii_see_tagpi_run_iii]

uys, what does "Error building default.hv and user hv" mean? i got this when the the build nb was already processing the registry...

[Noonski]

uys, what does "Error building default.hv and user hv" mean? i got this when the the build nb was already processing the registry...

You have a mistake in one of your rgu files.

Check the error.log created by buildos

[iii_see_tagpi_run_iii]

You have a mistake in one of your rgu files.

Check the error.log created by buildos

>>>> oh found it! typed a letter "O" instead of a number.. thanks

[Noonski]

Now uploading New HTC Home Plug in Package with almost all HHC customize options integrated as seperate packages.
And it also has an Italian language version along with it.

Just a very sneak preview at what's coming.

http://rapidshare.com/files/98034949/HTC_Home_Monster_0.9.7z

I just finished Moving all registry entries from All OEM folders to the OEM_Lang_0409 rgu.

So these are either registry settings that point to a folder that will need to me renamed for full language change, like "Opslagkaart\Mijn Documenten\Mijn Muziek"

Or registry setings that refer to a landuage id code like 0413 0410 etc.

And just registry settings that can me translated (but off course i might be wrong about some of them but we'll find out eventually after studying some official foreign roms)

I'm now cleaning the hives of the some type of registries (loads of double stuff in here also, so that will slightly increase performance in general)

[ababrekar]

Now uploading New HTC Home Plug in Package with almost all HHC customize options integrated as seperate packages.
And it also has an Italian language version along with it.

i have uploaded the screenshot. it only shows these 3 tabs and no other. i selected the other tabs in the options but doesnt show. used the packages posted by pkoper


wince cabmanager would be my guess but I only ever used it to do the reverse....

whats wrong with cooking and flashing?

I sometimes flash 10 to 20 times a day to get something working


see brother? i told u.. this doesnt work. something's wrong. hope u can help

[Noonski]

i have uploaded the screenshot. it only shows these 3 tabs and no other. i selected the other tabs in the options but doesnt show. used the packages posted by pkoper



see brother? i told u.. this doesnt work. something's wrong. hope u can help

And when you go to.

Start >> Settings >> Personal >> Today >>

How many Tabs do you have there?

SideNote:
Microsoft is learning, they are now disabling powermanagement on SD cards. Makes you think that they actually read XDA.

[Piranha1]

Hi Noonski for your monster kitchen some Cube animationen. Has sent pkoper to you already the link with Kitchen eng-germ.?

Later not work:mad:

[ababrekar]

And when you go to.

Start >> Settings >> Personal >> Today >>

How many Tabs do you have there?

SideNote:
Microsoft is learning, they are now disabling powermanagement on SD cards. Makes you think that they actually read XDA.

hi noonski.. as i have attached the screenshots.. i can see all the tabs in the options but doesnt show more than 3 tabs in today screen

[Noonski]

hi noonski.. as i have attached the screenshots.. i can see all the tabs in the options but doesnt show more than 3 tabs in today screen


Check if you have

[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\MASD]
"QuickDial"=dword:0

In RGU which used to fix contacts not showing up.

So the other tabs also don't work?

Can you rightclick and choose properties on the HTCHome.dll and under details check which version it is?

BTW did you see my new HTCHome Upload?
Hi Noonski for your monster kitchen some Cube animationen. Has sent pkoper to you already the link with Kitchen eng-germ.?

Later not work:mad:

No i have to download it tomorow at work unfortunatly.

I only downloaded his first version.

[ababrekar]

Check if you have

[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\MASD]
"QuickDial"=dword:0

i have a QuickDial in string name with value = 2_5_28727_0, so cant even make a new Dword named the same. tell me if i need to delete the string value and create a dword value?


In RGU which used to fix contacts not showing up.

how do i do it?


Can you rightclick and choose properties on the HTCHome.dll and under details check which version it is?

its is 2.1.1005.722


BTW did you see my new HTCHome Upload?

nope.. but now i need to be sure if this works becuase it doesnt make sense to flash the entire rom just to be sure of a file

[Noonski]

i have a QuickDial in string name with value = 2_5_28727_0, so cant even make a new Dword named the same. tell me if i need to delete the string value and create a dword value?


how do i do it?


its is 2.1.1005.722


nope.. but now i need to be sure if this works becuase it doesnt make sense to flash the entire rom just to be sure of a file

Disable Plug ins.

Delete the whole Key.

Then restart plug in.


or

Disable Plug ins.

Delete the whole Key.
Make new Key with dword value "0"

Then restart plug in.

You have the latest version.

Also check if the registry has.....

HKLM\Software\HTC\HTCHome\Tabsettings 1,2,3,4,5,6

[ababrekar]

Disable Plug ins.

Delete the whole Key.

Then restart plug in.


thanks noonski... this trick worked well, i deleted the string value key and created a new dword value key.. attaching some screenshots what i did after this trick worked :D thanks again

now i'm gonna cook these plugins within my rom (scared to uninstall them while playing around :D)

[Noonski]

thanks noonski... this trick worked well, i deleted the string value key and created a new dword value key.. attaching some screenshots what i did after this trick worked :D thanks again

now i'm gonna cook these plugins within my rom (scared to uninstall them while playing around :D)

Post the Cab's if they are free other wise PM me.

Becuase it looks cool :)

[ababrekar]

Post the Cab's if they are free other wise PM me.

Becuase it looks cool :)

plugins re retro clock with retedit (attached), ultimate launcher (will pm u) and home plugin with some tabs hidden. theme is wm future.tsk (found smwhr in xda)

[Noonski]

plugins re retro clock with retedit (attached), ultimate launcher (will pm u) and home plugin with some tabs hidden. theme is wm future.tsk (found smwhr in xda)

Muchos Gracias. Will Make Packages for Kitchen from these.

Here´s me Little 140 MB gift.

Ultra Alpha Beta Preview.

Monster Easy Language Kitchen.

http://rapidshare.com/files/98519442/SuperProCoreSplit.7z.001


http://rapidshare.com/files/98516419/SuperProCoreSplit.7z.002

Oh and running `04 Flash` will get you the rom i´m running At the moment.

Beta Neta Beta

[ababrekar]

Muchos Gracias. Will Make Packages for Kitchen from these.

Here´s me Little 140 MB gift.

Ultra Alpha Beta Preview.

Monster Easy Language Kitchen.

http://rapidshare.com/files/98519442/SuperProCoreSplit.7z.001

http://rapidshare.com/files/98516419/SuperProCoreSplit.7z.002

Oh and running `04 Flash` will get you the rom i´m running At the moment.

Beta Neta Beta

sorry noonski... can u post both files to seperate sites? rapidshare gets me to wait for 66 mins after 1 download :( is this ur kitchen by the way? how come it is 140mb? all packages in it thats why? u cool and u rock brother :cool: but buddy, please post both files to seperate site coz for wht i told u

my latest home cooked rom (screenshot attached) how do i reduce the program memory further than that? by the way, flashed the 03.12.90 radio and it works well

[Noonski]

sorry noonski... can u post both files to seperate sites? rapidshare gets me to wait for 66 mins after 1 download :( is this ur kitchen by the way? how come it is 140mb? all packages in it thats why? u cool and u rock brother :cool: but buddy, please post both files to seperate site coz for wht i told u

my latest home cooked rom (screenshot attached) how do i reduce the program memory further than that? by the way, flashed the 03.12.90 radio and it works well

I don't have broadband.
I left them uploading before i left work and i'm home now.
Sorry Bro.

You know what they say,.

All good thinggs come...

And as reducing Program Memory..... you got and ELFIN. More then enough memory free, to run three GPS applications at the same time (Almost).

[ababrekar]

And as reducing Program Memory..... you got and ELFIN. More then enough memory free, to run three GPS applications at the same time (Almost).

so the prog mem cant be reduced further than this? i guess then i have a good home cooked rom :D what is the program memory anyways, is it the sys folder? and oem folder is storage memory? which files to be deleted for getting rid of builtin fexplorer? i wish to replace it with resco explorer completely

[monsterfly]

I flashed my Elf using Extended Elf/Elfin Kitchen for WM6.1. Everything went OK, but not for long.
...I get the screen "Tap the screen to set up your Windows Mobile based device.". After tapping the screen align screen should appear but insted I get blank (white) screen...:confused:

[Noonski]

I flashed my Elf using Extended Elf/Elfin Kitchen for WM6.1. Everything went OK, but not for long.
...I get the screen "Tap the screen to set up your Windows Mobile based device.". After tapping the screen align screen should appear but insted I get blank (white) screen...:confused:

Might be duplicate provxml files ore conflcting provxml files.

Do you have a welcome.not file in the root of your SD card?

[monsterfly]

Do you have a welcome.not file in the root of your SD card?

Welcome file is in MM.

[Noonski]

Welcome file is in MM.

Oke but that could be the normal welcome.exe suposed to be there.

So i gater no welcome.not in SD root . Do a search for Provxml files and see if there are doubles.

Els note them down and temporarily remove then, make new rom and see if that flashes oke then sart putting them back a few at atime anf lash and put back a few again etc.

In most cases a blank screen right after ploink... is related to that. But it can always be samthing else.

[monsterfly]

OK I resolved my last matter at issue thanks to Noonski:).

One more question. Did someone get wi-fi, bluetooth and camera working properly?

[sonixpl]

TRANSLATION OF WM?

is there any possibility to translate Elfin ROM ? Thank to kitchen maybe somebody can explain how to do that please?

This question is dedicated to cooking masters ;)

[Taninpv]

Sorry to interrupt here, but I tried to read from post #1 to the end. Apparently, I am so lost.
Would it be possible for the first post to correct all the bugs, and repost the updated ROM. (probably not heh?)
Well, my mom told me. If you don't ask, you will not get.
Thanks.

[vibranze]

You can delete the whole fexplore* and do a find in registry for fexplore.exe and replace it with resco explorer binary.:) This method won't work for pimg.exe in case you also want to replace picture viewer with resco photo viewer.

Cheers,
Vibranze

so the prog mem cant be reduced further than this? i guess then i have a good home cooked rom :D what is the program memory anyways, is it the sys folder? and oem folder is storage memory? which files to be deleted for getting rid of builtin fexplorer? i wish to replace it with resco explorer completely

[vibranze]

Hi Bepe,

I also tried to figure out how to produce a flashable RUU_Signed.nbh from your kitchen.

After I clicked BuildNB.bat, there will be an OS-new.nb file inside temp folder. I use bPatch to make the size become 50MB then use htcrt to generate a RUU_Signed.nbh. I tried to flash it but always failed at 3%.

Kindly advise.

Cheers,
Vibranze

[ababrekar]

You can delete the whole fexplore* and do a find in registry for fexplore.exe and replace it with resco explorer binary.:) This method won't work for pimg.exe in case you also want to replace picture viewer with resco photo viewer.

Cheers,
Vibranze

noonski said the rom will have problems if i do that as a lot of other packages are linked to fexplorer

[vibranze]

Hmm, I didn't have any problem last time. Another method I can think of is to rename resco explorer to fexplore.exe or to create a lnk file to resco explorer instead of fexplore.exe, but not sure if this will work. You may want to try it yourself:)

Cheers,
Vibranze

noonski said the rom will have problems if i do that as a lot of other packages are linked to fexplorer

[ababrekar]

Hmm, I didn't have any problem last time. Another method I can think of is to rename resco explorer to fexplore.exe or to create a lnk file to resco explorer instead of fexplore.exe, but not sure if this will work. You may want to try it yourself:)

Cheers,
Vibranze

hmm.. renaming idea is good, but wont the overall functionality of the rom change? i'll try it out though :D

[vibranze]

hmm.. renaming idea is good, but wont the overall functionality of the rom change? i'll try it out though :D

Yeah, please try it out and let us know.:D.

Cheers,
Vibranze

[Noonski]

What i meant was that Some apps have a hardcoded Command like fexplore -folderdirectory. And not all File Explorers use same commands as Fexplore.

Renaming is a good test. And then open up Bluetooth explorer to see if it reacts. (i know Total Commander had issues getting into Bluetooth Folders)

[ababrekar]

@bepe.. i have tried my hand at extracting xip from kaiser official wm6.1 rom following this procedure

http://forum.xda-developers.com/showpost.php?p=1934603&postcount=390 (http://forum.xda-developers.com/showpost.php?p=1934603&postcount=390)

below are the files from my custom cooked rom and kaiser rom for your review. can either of u please check the contents and let me know if this is right then it will be of great help to everyone. also for the .payload file, i used nbsplit on kaiser shipped rom with this command "nbsplit -kaiser os.nb" can i use this file for cooking wm6.1 roms for my elfin?

i am trying to port the new build (19209) to elfin, lets see how it works out to be. also included the link to download the xip (19209) from trinity

XIP Kaiser (http://rapidshare.com/files/105544492/XIP_Kaiser.rar.html)
XIP My Own (http://rapidshare.com/files/105544741/XIP_My_Own.rar.html)
XIP Trinity 19209 (http://rapidshare.com/files/105544909/XIP_Trinity_19209.rar.html)

[ababrekar]

@bepe.. i have tried my hand at extracting xip from kaiser official wm6.1 rom following this procedure

http://forum.xda-developers.com/showpost.php?p=1934603&postcount=390 (http://forum.xda-developers.com/showpost.php?p=1934603&postcount=390)

below are the files from my custom cooked rom and kaiser rom for your review. can either of u please check the contents and let me know if this is right then it will be of great help to everyone. also for the .payload file, i used nbsplit on kaiser shipped rom with this command "nbsplit -kaiser os.nb" can i use this file for cooking wm6.1 roms for my elfin?

i am trying to port the new build (19209) to elfin, lets see how it works out to be. also included the link to download the xip (19209) from trinity

XIP Kaiser (http://rapidshare.com/files/105544492/XIP_Kaiser.rar.html)
XIP My Own (http://rapidshare.com/files/105544741/XIP_My_Own.rar.html)
XIP Trinity 19209 (http://rapidshare.com/files/105544909/XIP_Trinity_19209.rar.html)

no one still ready to guide us all?? really really strange

[ababrekar]

hi experts.. i am using my custom baked 19199 build wm6.1 rom cooked in bepe's kitchen for elfin. i want to port the new build (19209) to this rom and use it :D

i have attached a zip file with screenshots of various folders in rom from a downloaded 19209 xip and bepe's xip. can you please guide me on how to port this build to my rom? hope you can guide me how to and make out something out of the screenshots here :)

http://forum.xda-developers.com/attachment.php?attachmentid=80579&d=1207895001

hoping to read soon from experts

[ababrekar]

hi experts.. i am using my custom baked 19199 build wm6.1 rom cooked in bepe's kitchen for elfin. i want to port the new build (19209) to this rom and use it :D

i have attached a zip file with screenshots of various folders in rom from a downloaded 19209 xip and bepe's xip. can you please guide me on how to port this build to my rom? hope you can guide me how to and make out something out of the screenshots here :)

http://forum.xda-developers.com/attachment.php?attachmentid=80579&d=1207895001

hoping to read soon from experts

Hey guys. I have successfully ported the XIP to 19209 build :D Attached is the screenshot. I'm now trying to port the SYS 19209 Build too. Will post the XIP and a base ROM based on this build. Thanks to Ervius who guided me on the XIP porting

[monsterfly]

I have successfully ported the XIP to 19209 build :D

Would you be so kind ababreaker and tell me how to port XIP :D?
I have seccessfully ported SYS but do not have a clue how to port XIP.

[kokotas]

VERY good news man!:D:D
You're really into it!;)
I have some questions too.
If we "replace" the XIP in bepe's kitchen with the new XIP then we'll have the new core (OS 5.2.19209),
but we're missing the os.nb.payload in order to have the new build(19209.1.0.2), right? And if that's the case, how to create os.nb.payload when there is no "nbsplit -elf os.nb" command?!
Or maybe I don't know what I am talking about:confused:
But I think the "tool" to help us all is sitting here (http://forum.xda-developers.com/showthread.php?t=381307)!
Regards!

[kokotas]

Has anyone changed the mxip_notify.vol?

http://i279.photobucket.com/albums/kk145/k0k0tas/mxip_notify.jpg

My aims are:
1.Disable "repllog.exe*AppRunAfterTimeChange" so that ActiveSync doesn't start in booting.
2.Disable "ceipui.exex$AppRunAtNetConnectr"
and "ceipui.exex.AppRunAfterSync"
so that ceipui and Microsoft's SQM application could be removed(partially) [An interesting link about this is here (http://forum.xda-developers.com/showthread.php?t=370683)].
Any help, hint, advice???

edit: About the 2nd one, after checking the above link, I think that the change needed to be done is like in this pic (http://i279.photobucket.com/albums/kk145/k0k0tas/modded_mxip_notifyjpeg.jpg).
Still looking for the 1st!

Regards!

[ababrekar]

Would you be so kind ababreaker and tell me how to port XIP :D?
I have seccessfully ported SYS but do not have a clue how to port XIP.

hey brother.. i know xip porting and you know sys porting :D we can share both our knowledge and come up with a lego type rom ;) i'll guide u on xip porting and u guide me on sys porting.. anyways, i'm now going to post the guide in my thread with necessary links and credits too :) do check it out soon

[ababrekar]

VERY good news man!:D:D
You're really into it!;)
I have some questions too.
If we "replace" the XIP in bepe's kitchen with the new XIP then we'll have the new core (OS 5.2.19209),
but we're missing the os.nb.payload in order to have the new build(19209.1.0.2), right? And if that's the case, how to create os.nb.payload when there is no "nbsplit -elf os.nb" command?!
Or maybe I don't know what I am talking about:confused:
But I think the "tool" to help us all is sitting here (http://forum.xda-developers.com/showthread.php?t=381307)!
Regards!

if you replace the new xip into bepe's kitchen, it will still as long the new xip is for elfin. if not then, you can port the new build to the existing 19199 build xip in the kitchen. now since i have successfuly done the xip porting and am using it nicely, will be posting a xip porting guide in the initial posts of my elfin thread. do keep posted there.. you dont need a new os.nb.payload file, the same file in bepe's kitchen works with the new xip build. alternatively you can dump the payload from 19209 kaiser rom with the romhdr.bin but the command is no -elfin, you will still need to use the -kaiser switch

by the way.. the tool u mentioned is the perfect tool from a rocking expert (ervius) which helped me a lot in porting and also helping me a loads in cooking roms for elfin

[kokotas]

... the tool u mentioned is the perfect tool from a rocking expert (ervius) which helped me a lot in porting and also helping me a loads in cooking roms for elfin
Totally agree with you man!It should be a necessery "addon" for bepe's kitchen for our devices too!
Anyway...I'll wait your post in your thread!
Regards!

[ababrekar]

If we "replace" the XIP in bepe's kitchen with the new XIP then we'll have the new core (OS 5.2.19209)
OS 5.2.19209 is the XIP and will work if the same is for Elfin (then you only need to replace the XIP folder in Bepe's kitchen)

but we're missing the os.nb.payload in order to have the new build(19209.1.0.2), right
in order to have a new build you need to port the SYS

[kokotas]

OS 5.2.19209 is the XIP and will work if the same is for Elfin (then you only need to replace the XIP folder in Bepe's kitchen)
in order to have a new build you need to port the SYS
Thank you so much for making it clear!:D
Regards!

[khizar79]

Extended Kitchen for Elf/Elfin

Elfin base: New Elfin 2.xx
OS base: VF Kaiser UK 3.08.161.0 (Build 19199)

Completely rebuild the XIP section based on:
- Kaiser: MSXIPKernel, MSXIPKernelLTK
- Elfin: OEMXIPKernel
adjusted boot.rgu by adding the 19199 related changes
OEM packages except of OEMDrivers are clean 19199 packages



Requires the Microsoft Visual C++ 2008 Redistributable Package (http://www.microsoft.com/downloads/details.aspx?FamilyID=9b2da534-3e03-4391-8a4d-074b9f2bc1bf&DisplayLang=en)
Full XIP editing support
I've added a tool that removes the RGU's from the rom and moves all the DSM content to one DSM


Please read:
For the case that you are a cooking ROMs and getting donations for it, I would really appreciate a small donation,
cos I'm saving money for a new device. (I thing that would be fair :))

Download: ELFIN_DEV_v2.1_Build_19199.rar (http://rapidshare.com/files/89460226/ELFIN_DEV_v2.1_Build_19199.rar)

any mirror other then rapidshare or magauploder. Like media fire. Rapid share never works for me. It always says that my computer is already downloading a file. Whear as i'm not doing so.

[kokotas]

For those who can't d/l from Rapidshare...
Mirror : MediaFire (http://www.mediafire.com/download.php?o3yvqmdevsk)
Regards!

[ababrekar]

I'll wait your post in your thread!

its up. first post of my thread... :D

[comec]

Sorry, but I'm a newbee at cookin ROMs.
Is there a way to cook the ROM with german language?

[trapped.somewhere]

Hi all,

is this a base rom without any application?? can it be used without cooking?? can someone please provide screenshot??

thanks alot

[ababrekar]

Hi all,

is this a base rom without any application?? can it be used without cooking?? can someone please provide screenshot??

thanks alot

this is bepe's kitchen with only the sys and basic oem.. you need to populate the rom with packages

OEM packages except of OEMDrivers are clean 19199 packages

[kokotas]

Hi all, is this a base rom without any application?? can it be used without cooking?? can someone please provide screenshot??

thanks alot
No it's not a base ROM that you can flash to your phone without cooking!
You'll have to add some essential missing stuff.
I guess that you didn't read this thread from its start. I think that you should do that before trying anything with your device!
Regards!

[ababrekar]

I think that you should do that before trying anything with your device!

aah!! i always forget to pass this warning :D

[cybek]

No it's not a base ROM that you can flash to your phone without cooking!
You'll have to add some essential missing stuff.
I guess that you didn't read this thread from its start. I think that you should do that before trying anything with your device!
Regards!

So when I cook it then it will work on my Elf?
I want to start cooking WM6.1 for my device.
First of all what will I have when I cook it without adding anything? Will W-Fi, Bluettoth, GSM work properly?
I understand that I need to add some "essenitial" stuff. But what is not included and Required to use Elf with this rom properly? Keyboard, drivers [?!] etc?

Heh ... maybe my questions are stupid but please forgive me - I'm totally cooking newbie ;)

P.S. when flashing with this newly cooked rom - i need to use USPL SPL (USPL) v1 - CID Unlock & flash *ANY* rom to your device (http://forum.xda-developers.com/showthread.php?t=320155) - is this correct?

[Noonski]

Has anyone changed the mxip_notify.vol?

http://i279.photobucket.com/albums/kk145/k0k0tas/mxip_notify.jpg

My aims are:
1.Disable "repllog.exe*AppRunAfterTimeChange" so that ActiveSync doesn't start in booting.
2.Disable "ceipui.exex$AppRunAtNetConnectr"
and "ceipui.exex.AppRunAfterSync"
so that ceipui and Microsoft's SQM application could be removed(partially) [An interesting link about this is here (http://forum.xda-developers.com/showthread.php?t=370683)].
Any help, hint, advice???

edit: About the 2nd one, after checking the above link, I think that the change needed to be done is like in this pic (http://i279.photobucket.com/albums/kk145/k0k0tas/modded_mxip_notifyjpeg.jpg).
Still looking for the 1st!

Regards!

Tried this but disabling these brought up loads of issues, so it is possible to edit these. And i stopped testing after a few times.

[kokotas]

Hi Noonski!
Welcome back!
1.Still haven't found the way to disable "repllog.exe*AppRunAfterTimeChange" so that ActiveSync doesn't start in booting.:confused:
2.Removing SQM has been easier since this (http://forum.xda-developers.com/showthread.php?t=393997) came out!

Regards!

[Noonski]

Hey good one.

Was away didn't see that one.

Trying to Disable SQM broight me headaches and countless flashes trying to figure out how to disable. But Patching that specific file is something i would never would have known how to do that let alone know which file it would be.

But i was able to disable SQM, just not remove it.

[voided]

>>>>> found it! pls ignore my querry.. thank to all :D

Hi iii_see_tagpi_run_iii or anyone, are you able to share the solution here? I have been searching high and low but still couldn't find the solution.. Thanks!!!!:)

[Noonski]

Hi iii_see_tagpi_run_iii or anyone, are you able to share the solution here? I have been searching high and low but still couldn't find the solution.. Thanks!!!!:)

His solution was that he had refoematted his PC and forgot to reinstall the framework that is linked in the first post.

[voided]

His solution was that he had refoematted his PC and forgot to reinstall the framework that is linked in the first post.

huh? I thought he was talking about including the Bluetooth, camera drivers into the ROM. Maybe my wrong.

Anyway, anyone can highlight the steps need to get Bluetooth and camera working on my Elf? Where to I get the removed packages that is required. Thanks again.

[Noonski]

Releasing Thread From Stickies.

Placing a Newer Kitchen in stickies that has an Active ELF member keeping an eye on. We don't want to disctract Bepe from what he does best.

If interested in Cooking Try Kokotas Kitchen Based of Bepe's Beta Kitchen.
Which never really was a Beta to begin with.
Worked from start without issues.

Check Kokotas Kitchen using Bepe's Great work here:
http://forum.xda-developers.com/showthread.php?t=401989