[ROM][WWE]New WM6.1 Rom; SPC WM6.09SP1 Storage 56.49 MB FREE[ONLINE]

[Noonski]

6.09.SP3.63 (http://rapidshare.com/files/130772928/RUU_Signed.zip)
(Surface Beta Nightly Build) Password Protected PM for testing (Completly different Rom then SP1)

The Most Boring Rom Around?

SPC WM6.09 Service Pack 1 (http://rapidshare.com/files/103527963/SPC_6.09_SP1.zip)

(Mirror Mediafire (http://www.mediafire.com/?yzzzcfndagu))

(Mirror MegaUpload (http://www.megaupload.com/?d=CH2HPVM6))


UC Compliant for Rom Flashing Junkies

(Little explanation (http://forum.xda-developers.com/showpost.php?p=2068549&postcount=266))

(Offical thread for UC customization (http://forum.xda-developers.com/showthread.php?t=366337))

OS 5.2.19199


Storage: 59.88 MB (59.88 Without UC SD Autorun)

In Use: 3.39 MB (2.82 Without UC SD Autorun)

Free: 56.49 MB (57.06 Without UC SD Autorun)


Program: 47.65

In Use: 24.57

Free: 23.30


INSTRUCTIONS

Download
1. Download SPC WM6.09 Service Pack 1 and unzip on your PC
2. Before flashing the ROM, move SPCPreConFig.Cab from the unzipped files to temporary directory on SD card and install (it doesn't really matter where you choose to install it, as the contents will be installed on the SD)

Optional Step to Preserve Contacts and Agenda:
Make a copy of PIM.VOL from the root directory of the Device using Total Commander or any other real file explorer to "\Storage Card\Cabs\".
This will overwrite the blank pim.vol file SPCPreConfig.cab installed
This optional step will result in your Agenda and Contacts being preserved when your device reboots after customization, and you only need to do this once)

Best ELF Flashing Method
3. Remove SD card but keep it slightly inserted so you can pop it in quickly.
4. Press and hold Camera button and then use stylus to reset the device.
5. The TriColour Boot screen will display. Verify that you have SPL 1.111.001
6. Flash using 01 Flash Rom application from unzipped files above.
7. Once the Update Tool on Windows displays "Finished" reseat the SD card into the slot immediately and remove the USB cable if you are using SDautorun to copy over pim.vol.
8. Sit Back and enjoy not needing to resync and calibrate your device.

And if you where a smart flasher you had allready installed the HTC Network Wizard 1.1 making life even easier whatever rom you flash.

Best Elfin Method.......... Don't know.. need confirmations.



What it does have:

WM 6.1 OS. Threaded SMS & New Pocket IE.
UC Compliant (http://forum.xda-developers.com/showthread.php?t=366337) autorun.
Quickmenu. (Now with added default Programs folder link added and Control Panel link. Long Press of Windows Key is set to close all apps)
Marshall's Touch waiting Icon. (INstalled trough UC SDAutorun)
HTC Album SP1 with directory fix. (Some fixes and new graphics and lay outs and new resco dll)
HTC Home Patched With Tabsettings.
HTC Endkey. (Long Press of Red Key is broken)
HTC Quicklist. (Because of Arc soft MMS version and EMAIL account setup through UC SDAutorun all buttons work)
Also the skin is on the SD card in a folder in My Documents (You'll find it don't worry). So you can replace the theme with any theme you want for the quicklist)



Bluetooth Explorer.
Simm Manager 6.41.
T-Mobile Theme. (Installed through UC SDAutorun, so it can be
StartUpManager
SoftKey Applet Dot Ferd's (Site (http://www.dotfred.net/SoftkeyAppletEx.htm))
Skype dll files in rom for SD integration
HTC TaskBarZoom (Disabled, but i added a cab in Quickmenu to rectivate it. I'm not a fan but many others are)
Office Word 6.1
Skinned Calculator
Alt-Tab replaces Cube Swipe
ArcSoft MMS 4.2.8.1 (Not adding v5 because it breaks Quicklist buttons)
Esmertec Jbed 3.1 20080222
HTC ComManager (Exe files run from SD)
Sapsettings. (But the service is disabled it can be enabled though Quickmenu cab)
Battery Status 1.05.1 (Replaces Taskmanager and X Button to)(Pressi9ng in the middle of BTstatus opens CommManager, you know where it should state the operator, Set to 247mhz. Recommended not using AutoScale because it might make BTstatus dissapear from home plug ins)
InternetSharing
WM5torage 1.75 (1.8 was acting weird)
Total Commander 2.5
Kaiser G3 Dialer (Still a bit buggy)
STK Services (Service Disabled but it can be enabled through Quickmenu Cab)

More importantly,


What it doesn't have:

Oxios ClearMem (Quickmenu has that function to)
WM6.1 TaskManager. (It sucks and BTstatus has same function)
WM 6.1 Welcome Center. (Cab Coming)
Sample Music.
Help Files.
Notes Templates.
Picture Templates.
Extra Ringtones.
Extra Pictures.
Office Excell. (Cab Coming)
PowerPoint. (Cab Coming)
Office OneNote Mobile. (Cab Coming)
TiffViewer. (Cab Coming)
ZipView.
HTC AudioManager.
HTC Cube.
HTC XClose 1.5 (BTstatus has that function)
HTC NetWork Wizard.
Transcriber. 9Cab Coming Maybe..)
Symbolpad.
Device Pin Skin.
Original PhonePad Skin.
Adobe Reader LE. (Will Come as SPCeed Cab with native File Open Support)
WinMobile OS Games. (Will Come as SPCeed Cab with native File Open Support)
AutoUpdate
HTC Voice Recorder (Cab Coming
Windows Media Player Skin (Support for Skins from SD)
Backlight.exe moved to SD
CSD line type moved to sd
Deviceinfo moved to SD
GPRSAuthentication moved to SD
Microphone AGC moved to SD
SMSservice moved to SD
TFsettings moved to SD
Wlansettings moved to SD
Programs is Empty but again it can be restored using Cab if needed.
Data Disconnect (It's running fine from SD)

Euhm, euh, it's propably missing more

Tweaks:

Show GPRS in Control Panel
Show Lunar Calender Option in Agenda.
Calender Set To Week View.
System and Ring Volume Set to Max.
WMP Volume Set to Max, Set to shufle, set to repeat and show time remaining.
Glyphcache Set to 4096.
Disabled Homescreen Time Out.
Show Extraf Wifi settingsOption Control Panel.
Excess Services and StartUp items removed.
Flash Lite Player 3.0 SD integration. Same as above.

Extra Apps To Install ONLY ONCE EVER. (SPCeed Cab's (http://forum.xda-developers.com/showpost.php?p=1936530&postcount=67))



All Work From SD

HTC Voice Recorder (http://rapidshare.com/files/93104785/SPC_HTC_Voice_Recorder_SD.cab)
HTC Network Wizard 1.1 (http://rapidshare.com/files/95488777/SPCeed_HTC_Network_Wizard_1.1.cab) (Small Update in available Providers)
MS Bubble Breaker (http://rapidshare.com/files/93104027/SPCeed_MS_BubbleBreaker.cab)
MS Solitaire (http://rapidshare.com/files/95211648/SPCeed_Solitaire.cab)
HTC Audio Manager (http://rapidshare.com/files/93103276/SPCeed_HTC_AudioManager.cab)
Synchro Time (http://rapidshare.com/files/93106488/SPCeed_SynchroTime.cab)
Touched Total Commander V1.0 (http://rapidshare.com/files/93906793/SPC_Touched_Total_Commander.cab) (Good Guys Wear Black)
Dot Fred's SPCeed TaskManager+Regedit 2.7 (http://rapidshare.com/files/93712707/SPCeed_TaskManager___Regedit_1.0.cab) (Site (http://www.dotfred.net/TaskMgr.htm))
GlyphCacheSettings Pack (http://rapidshare.com/files/95193782/SPC_GlyphCacheSettings.cab)
Flash Lite 3.0 (http://rapidshare.com/files/96824631/SPCeed_Flash_Lite_3.0.cab)
GoogleMaps 2.0 SPCeed (http://rapidshare.com/files/97339718/GoogleMaps.CAB)
(yes weird text in the launcher but it works)
Adobe Reader 2.0 LE SPCeed (http://rapidshare.com/files/98320863/SPCeedAdobeReader.cab)
Skype SPCeed (http://rapidshare.com/files/102090776/SPCSkypeForPocketPC.CAB)

To Do List (http://forum.xda-developers.com/showpost.php?p=1911902&postcount=25)
Fix (http://rapidshare.com/files/90898327/ELFIN_DEV_v2.1_Build_19199_V0.3.7z) Stuff

How To Tutorials:
Make a custom Screenalignment .xml for SD autorun. (http://forum.xda-developers.com/showpost.php?p=2052809&postcount=236)



Thanks to Bepe for his new Beta Kitchen, Anichillus for the enjoyment i've had with his kitchen (based on Bepe's and others tools), Rishi, Cloudyfa, Tom Codon, Koala, Cstewart and Sleuth255 for wanting to make UC Compliancy (http://forum.xda-developers.com/showthread.php?t=366337) Standard.

My fellow Touch Cooks, Bram Smulders, Xtriny, SwiftBlade Tiggerbcn, PKoper and you Faithfull flashers out there ZyncMaster Re-Mi, Cobra2, Funman, SwitchCorp & AsusFreak. All of you guys have made the Touch thread better then it was.

And as always My shout out to the man that's been inspiring me to do this in a way he did best.
FARIA

Please Report Any Issues To The Thread.

[zyncmaster]

hi Noonski,

Good to see you getting busy trying to cook us a new rom :) I'm up for the challenge...;)

[Re-Mi]

Sure, i got balls.

Show me the goods.

[Noonski]

I just now figured out how to integrate Bepe's new Mini Litchen into my familiar HyperCore infironment.

First one i made was based on an older WM 6.1 build and it suck maytor ass but really show the slowness well.

It's full of buggs as i haven't done any work on my old packages wich are incomplete.

But by installing them anyway into the rom it's easier for me to see what needs to be done , if you know what i mean.

So that's "RUU_Signed01.nbh"


And just now i made my first from Bepe's new Build 5.2.199 (I make mistakes with numberings who cares it's the latest)
Added some stuff to be sure the Rom would be larger then 50MB to flash.
Haven't removed anything else yet.

Swiping will give an error as Cube is not in it.

Rename RUU_Signed02.nbh into RUU_Signed02.nbh

But it's fast and very clean.

There's nothing really modified but it might be funny to see some weird experiMENTAL builds that ussually don't get out.

Links coming for both RUU's without the whole Updater stuff with it.

Now how do i kill biotouch completly?

I've attached BioRandomAcces.zip

Drop the files into windows folder, it will bring up Random Acces when swiping upwards ;)

What would be cool Small App to replace the cube with?

(I don't want it back anyway)

Thing about Bepe's Build is Both ELF and ELFIN and i can't change the PP to 4 or 6.

So it will be 8 MB PP but it is a better Build then the first one i tried.

I still need to learn stuff about XIP editing (if it will even make it possible)

Link Removed

Link Above For Flasher Anymous Subscribers. Be sure to make a back up of your contacts as you won't be using the above roms a longer then 2 hours.

[Noonski]

Sure, i got balls.

Show me the goods.

Aha so that's what Bram's Cooking a Six sided Cube.

[Re-Mi]

Aha so that's what Bram's Cooking a Six sided Cube.

No it will be a 4 side ;)

[Noonski]

Just tried to install icecube on this clean rom.

It started up but did not recognize left, right and down slides:mad:.

It's missing to much Touch Files and drivers and registry settings at the moment.

And i don't have all my shit here at work.


I disabled the Up swipe for cube now.

HKLM\Software\OEM\TFLOSettings\
EnableCube=0

[Noonski]

Changed the thread name into Vanilla.

Time to brick my device, i'm doing a little experiment with XIP to bring 4 MB pagepool to Bepe's Build.

I don't know what i'm doing so let's pray.

Aeugh... that didn't work.

[zyncmaster]

i'm using ur RUU_Signed02.nbh rom! it's real fast... :)
would u tell me what happened with the wireless settings? cant find it anywhere... :rolleyes::confused:

happy to test ur roms Noonski! :)

[Noonski]

i'm using ur RUU_Signed02.nbh rom! it's real fast... :)
would u tell me what happened with the wireless settings? cant find it anywhere... :rolleyes::confused:

happy to test ur roms Noonski! :)

Yeah the 02 version was missing Loads of drivers an OEM files.

Looking for a keybddr.dll 2.26 vesion. (Note to Self)
Looking for b5d1b1fe-d058-4a95-a90e-321ea5c313f1.RGU from 2.2 Rom

[cstewart]

The excitment of the Master Cooker Noonski is starting to build to a fevered pitch. 6.1 beta base code wiht much of the fluff stripped out. I continue to use and i like the organization stratagy in how the ROM / SD card is organized. This appears to promice big storage, execellerated speeds, and the new UC stratgy to us non-cookers to effeciently add back in our favorite / just can;t live wihout apps. I am waiting with baited breath on the jump from SPC 3.o to FSPC 6.1

[Noonski]

The excitment of the Master Cooker Noonski is starting to build to a fevered pitch. 6.1 beta base code wiht much of the fluff stripped out. I continue to use and i like the organization stratagy in how the ROM / SD card is organized. This appears to promice big storage, execellerated speeds, and the new UC stratgy to us non-cookers to effeciently add back in our favorite / just can;t live wihout apps. I am waiting with baited breath on the jump from SPC 3.o to FSPC 6.1


Aagh second time i lost the post.

Wel more surprise for tomorow then.

[shael]

NOONSKI WE LOVE YOU <3:p

[Noonski]

Ladies and Gentleman.....

Now i really didn't expect myself to get the hang of it this fast.

It's alive, It's Alive!

I have created a monster.

60.58MB FREE Storage Memory Free after A reset.
62.88MB Total.

I have reached my goal.
Windows Live Messenger Fixed.

[Re-Mi]

Ladies and Gentleman.....

Now i really didn't expect myself to get the hang of it this fast.

It's alive, It's Alive!

I have created a monster.

60.58MB FREE Storage Memory Free after A reset.
62.88MB Total.

I have reached my goal.
Windows Live Messenger Fixed.

WoW, are you alreaddy offering it to download somewhere? Or is it just in the Wow i did it and now i have to make public one phase?

Greetz

[dan13l]

Ladies and Gentleman.....

Now i really didn't expect myself to get the hang of it this fast.

It's alive, It's Alive!

I have created a monster.

60.58MB FREE Storage Memory Free after A reset.
62.88MB Total.

I have reached my goal.
Windows Live Messenger Fixed.

Sounds great! What's the speed like? Oh, and link? ;)

[zyncmaster]

Superb!! this is an achievement Noonski :) Congratulations.... if you could share the rom, we will be happy to test it out for you....

we are waiting.... :)

[pkoper]

Ladies and Gentleman.....

Now i really didn't expect myself to get the hang of it this fast.

It's alive, It's Alive!

I have created a monster.

60.58MB FREE Storage Memory Free after A reset.
62.88MB Total.

I have reached my goal.
Windows Live Messenger Fixed.

Congratulations!

Sadly, the german monster isn't breathing yet... :-(

[Cobra2]

Ladies and Gentleman.....

Now i really didn't expect myself to get the hang of it this fast.

It's alive, It's Alive!

I have created a monster.

60.58MB FREE Storage Memory Free after A reset.
62.88MB Total.

I have reached my goal.
Windows Live Messenger Fixed.

Wow sounds GREAT Noonski :) What about the RAm how much did u managed 2 get out of em ???

When can we expect ur release, have been waitin for an Elf Vanilla for a looooooooong time :)

Great Work as usually, lKeep em coming ...

[Noonski]

Uploading as we speak.

It's in.7z format as i support Good Free Ware.

(and it was the easiest format to get the kitchen under 100MB)

[Cobra2]

Uploading as we speak.

It's in.7z format as i support Good Free Ware.

(and it was the easiest format to get the kitchen under 100MB)

Nice

Me and my device r waitin :D:D

[zyncmaster]

Uploading as we speak.

It's in.7z format as i support Good Free Ware.

(and it was the easiest format to get the kitchen under 100MB)

hi Noonski,

Could you share some more info on what is in and what is not in this new rom.....

[Noonski]

hi Noonski,

Could you share some more info on what is in and what is not in this new rom.....

Just Update First Thread.

With Download.

http://rapidshare.com/files/90887173/RUU_Signed.7z

[Cobra2]

Just Update First Thread.

With Download.

http://rapidshare.com/files/90887173/RUU_Signed.7z

Downloadin as we speak :) But what about the ram, how much is it on ??

[Noonski]

Make seperate Packages for SIM_TK folder.
Merge PROVXML files.
Remove Certificates from ControlPanel (Who uses this anyway)
(DONE BUT NOT READY) Seperate Office Applications
Merge SYS Folders.
Make Loads of Custom Oem Packs.
Clean Hives.
Remove Windows Catalog
Remove SQM (Not removing untill someone else finds a working way for WM6.1)

[Noonski]

WM 6.1 Welcome Center
Cube Graphics and Cube Swipe Disabled in registry.
OneNote
Sample Music
Extra Ringtones
New WM6.1 Taskmanager
HTC Commanager 10B
HTC Commanager 08B
OS Games
Intent Midlet Manager
Glyph Cache Tweaks.
Voice Dial
ModemLink
Remote Desktop

(I'm checking and remaking all packages i have)


For Packages that cannot be installed side by side i have added a blank file into each package.
The kitchen will give a warning for double files and the file mentioned in the error will point at the mistake made, because i gave it that name. Very simple implementation.


No the list is not finished yet.
This will be the craziest kitchen around, with more options you thought the Touch had.
And Almost Foolproof (nothing is ever FoolProof)
The only requirement is that your end rom is 50MB or bigger.
I'll post some Sample Packages for Clock Graphics, HTC Home, Home Theme, Cube, Random Acces, Endkey and Quicklist. In the Mean time you guys can start looking for them and posting the Custom graph Pack.
Rule is No Custom Graphics from Cook Specific Rom's.
If they want their skins to be public they can post them themselves.


So Who's got some Packages?
I'm looking for that great Phone Dialer from the Shadow Rom.

[pkoper]

This list wil grow.

Will this vanilla be dumpable?

[Noonski]

Will this vanilla be dumpable?

Nope.

Bepe's Beta Kitchen makes the Rom Undumpable.

When you dump it it will give you an empty Sys folder with a folder called.

"Make Your Own Rom"

But no fear the Kitchen i used with all the options i used for the above rom is at 70% Uploading.

So you can use that, even if it's a Beta to Bepe's Beta.
Difference is i have added the EOMAPPS files and some missing drivers.
I have used several Rom's to look for the best looking or newer Exe files.

I'm still not done doing all the tests i want to do, so who knows it might become possible to re-extract the Rom.
And Maybe Bepe will change that in his kitchen, but i actually find it a usefull function.
It moves all .DSM files into only a few .DSM files which only contain the information to make the foldermentioned above.
Which leaves the Windows folder a lot cleaner and faster.
It might even become 4MB Pagepool, Who knows for sure.

[pkoper]

Nope.

Bepe's Beta Kitchen makes the Rom Undumpable.

When you dump it it will give you an empty Sys folder with a folder called.

"Make Your Own Rom"

But no fear the Kitchen i used with all the options i used for the above rom is at 70% Uploading.

So you can use that, even if it's a Beta to Bepe's Beta.
Difference is i have added the EOMAPPS files and some missing drivers.
I have used several Rom's to look for the best looking or newer Exe files.

I'm still not done doing all the tests i want to do, so who knows it might become possible to re-extract the Rom.
And Maybe Bepe will change that in his kitchen, but i actually find it a usefull function.
It moves all .DSM files into only a few .DSM files which only contain the information to make the foldermentioned above.
Which leaves the Windows folder a lot cleaner and faster.
It might even become 4MB Pagepool, Who knows for sure.


Excellent!

This will make a lot easier for me to make a decent german version. For now I just keep getting stuck.

Thanks Noonski!

[Re-Mi]

This must be the fastes rom i've seen.

The only thing i miss, yeah yeah lazy dutchman is the networkwizard.

COuld you concider add it into the next release, i think this should be a base function.

Greetz,

[Noonski]

This must be the fastes rom i've seen.

The only thing i miss, yeah yeah lazy dutchman is the networkwizard.

COuld you concider add it into the next release, i think this should be a base function.

Greetz,

Ghehehehehehe, Good to hear it wasn't me being paranoid.
(And i haven't even aplied any Performance tweaks like SD Card Block Reading Size for faster SD acces, larger Cache Settings etc) But i leave this to be fought over by you.

Euhm Network Wizard is dead.
Long Life CU SDAutorun.
You can now export the registry settings with your Connection settings.
Use a tool to convert it into XML.
Then configure the SDconfig file to parse the xml file.
And presto, every time you flash it wil apply your personal settings stored on SD. That's what's so great about CU Compliancy.

It will be in the next version.

I've tested it by doing a
copy from SD\PIM.VOL
to
PIM.VOL

And emediatly after flash i had all my contacts and appointments.

CU Rocks.


Kitchen is uploaded

http://rapidshare.com/files/90898327/ELFIN_DEV_v2.1_Build_19199_V0.3.7z

[dan13l]

I need to figure out if I can write a script that installs my certificate, then configures the Exchange server settings for me...

Will hold off on trying this until UC's working, sounds like another update will be along soon ;)

[Noonski]

Damn and here i was planning to take a few days rest and let you guys play with the kitchen and fix some loose ends forme ;)

Testing A Rom By SYROP, if this works it means 4MB Pagepool is possible and prolly also and exractable version.


Hooray For Syrup...

4MB PagePool is working and extracktable.

Special Request to All Cooks And Users that want to try and make packages for a new SuperProCore Kitchen?

Rassum Frassum Dammit.... I'm having a hard time not getting Below 50MB OS i actually have to add stuff to make it instead of removing it, so some crazy guys can play with a new build.
Vario G4
IPL/SPL 2.21.001
Radio 2.19.11
ROM WM5SE (http://forum.xda-developers.com/showthread.php?t=330080)
Need to make a GraphicalSignature.

[Cobra2]

One hell of a rom :) nice and clean but most of all FASSSSTTTTT :D:D

Keep em comin Noonski

[Hadelo]

Wow - there has been lots of tweaking.
WM 6.1 is so fast. Unbelievable I don't even need to overclock the cpu.

Thank you Noonski!

[zyncmaster]

Really happy with ur latest release... :) nice... quick n responsive... hopefully we get to see other advertised benefits in ur nxt build... ;)

keeping my fingers crossed for ur nxt release.... honestly it's so much more fun to have u around Noonski.... :D

[Noonski]

It's still Beta Guys ;)

At the moment i'm stripping it to the bone and making Packages for each Part that Comes in the Rom.

I will have seperate Packages for every removed component and everypackage will get the information of how much spave it will take in the RUU_Signed file.

So i'm struggling to keep the .NBH file around 50 MB.

I now switched to a 4MB Pagepool version BTW.
I'm still doing a lot of trivial work and experimenting.
But i'll be uploading the kitchen version next time.
I'll keep using Bepe's new Kitchen for this at the moment, untill i have changed the old HyperCore a bit.

It will have the Preset configuration so it will create the smallest size .NBH file to flash.

And i'm building in Some extra security into packages that cannot be installed together.
I'm really not out to make a ROM perse anymore.
There's always to many requests anyway.
This is more about stripping The Latest WinMob Build and bringing out packages for the kitchen that will make it way to easy to make your own Rom.

If there's specific Graphics Users want, i (or someone else) can make Selectable packages for those.

I've added a few packages that show what i mean. (Mostly for cooks maybe).

My ultimate goal would be that you don't switch your home theme or Cube graphics, you just build yourself a new ROM and flash it and CU Compliancy But's back at least your contacts and agenda and more if you want.

The kitchen will even let you Precook your Country or Hour Method.

At the moment i have a little hardware problem with my Touch to.
It doesn't recognize SD cards anymore.

[shael]

Works On Elfin 100%

[Noonski]

Works On Elfin 100%

HM Elfin that must really Rock,

I didn't do my home work but doesn't that also have increased Processor? or only more memory?

Funny how almost 40 People downloaded a Beta Kitchen and Rom and none have responded?

They will prolly turn up when they find the mistakes that are in there but haven't had the time to fix yet.

[funman]

HM Elfin that must really Rock,

I didn't do my home work but doesn't that also have increased Processor? or only more memory?

Funny how almost 40 People downloaded a Beta Kitchen and Rom and none have responded?

They will prolly turn up when they find the mistakes that are in there but haven't had the time to fix yet.


I got the kitchen but it qould not work for me, was just giving me a errors and not really had much time to play and findout why!

Update now : Worked out what i did wrong! Ok are you going to be doing a package for the quick menu, cus i really like using that and have everythihng run off the SD Card

[pkoper]

wrong thread

confused....

Ehhh... is this the pro kitchen thread?

[Hadelo]

Your kitchen beta rom is running on my Touch for two days now.
And the idea of a totally UC compliant rom with features you can add by yourself is the way to go I think.

It's more than just a new rom. It will be the new way how to set up the whole device.

If we say so we do not need different roms from now on. Just all the packages.
Maybe there could also be a kitchen where you can select different Kernel Versions to be installed.

great great work so far.

[cstewart]

Your kitchen beta rom is running on my Touch for two days now.
And the idea of a totally UC compliant rom with features you can add by yourself is the way to go I think.

It's more than just a new rom. It will be the new way how to set up the whole device.

If we say so we do not need different roms from now on. Just all the packages.
Maybe there could also be a kitchen where you can select different Kernel Versions to be installed.

great great work so far.

Yes this is the way to go. Fast, super lean, UC compliant room to grow with user defined packages.

Simply brilliant Noonski. The ultimate in custom ROM, that potentially is custom for each user. The only thing that I could see added beyond the packaged out components, would be the reported memory manager that has seemed to disappear along with xTriny. I am betting he pops up again.

BTW, the elfin has the same processor, just more memory.

[Noonski]

I got the kitchen but it qould not work for me, was just giving me a errors and not really had much time to play and findout why!

Update now : Worked out what i did wrong! Ok are you going to be doing a package for the quick menu, cus i really like using that and have everythihng run off the SD Card


Ey I'm curious what went wrong??


Yeas i have the Quickmenu Package but it's a very easy one to make.
Funny thing is that i found the performance for QuickMenu inside the Rom with Compact Net 3.5 was a lot slower then when i had it running from SD.
Also the Options Menu's are Garbled. But it strangly doesn'thappen when i run it from SD.

This is not the finished version of the QuickMenu Pack but for now enough.

It doesn't have Registry settings to kill the anyoing Battery Meterthat interferes with Notifications.

Also added the Broken CU Compliancy package.

I really shouldbe doing some other stuff untill Sunday, so maybe someone else can fix it.

It might also be a mistaken boot.rgu or a PROVXML file from OEM folders.
I can't test CU fully anyway (it did workbefore... Damn)(2 years waranty on a Touch T-Mobile will never learn)

[Swiftblade]

Hi Noonski,

Great ROM with UC compliant! I got to try it someday.. The forum is always so lively with you around:D

[rafiki6]

Wanna make a fake "official" HTC Touch Rom, that mimics all those things found in the WWE WM6 Rom, but instead with WM6.1? Just I mean like that basics. The touch keypad and keyboard, the original touch cube, and home today plugin, taskmanager, and all those fun things Pretty much the one from dopodasia.com but with Wm6.1 instead? That would be awesome...thanks dude!

[funman]

Ey I'm curious what went wrong??


Yeas i have the Quickmenu Package but it's a very easy one to make.
Funny thing is that i found the performance for QuickMenu inside the Rom with Compact Net 3.5 was a lot slower then when i had it running from SD.
Also the Options Menu's are Garbled. But it strangly doesn'thappen when i run it from SD.

This is not the finished version of the QuickMenu Pack but for now enough.

It doesn't have Registry settings to kill the anyoing Battery Meterthat interferes with Notifications.

Also added the Broken CU Compliancy package.

I really shouldbe doing some other stuff untill Sunday, so maybe someone else can fix it.

It might also be a mistaken boot.rgu or a PROVXML file from OEM folders.
I can't test CU fully anyway (it did workbefore... Damn)(2 years waranty on a Touch T-Mobile will never learn)


Man i am so dumb why would i need the quick menu off you when i already have it on the SD Card!! Just need to put the reg keys in and the start lnk for it!! If you want to help me out can you post me the reg that you changed to have it running correctly! And i would be running from SD card, should have said that above!

[Noonski]

Man i am so dumb why would i need the quick menu off you when i already have it on the SD Card!! Just need to put the reg keys in and the start lnk for it!! If you want to help me out can you post me the reg that you changed to have it running correctly! And i would be running from SD card, should have said that above!


Well you can use the package from the thread above, take out the Quickmenu exe and dll file.

Open the .lnk file in Notepad and change the path to SD destination.

As for the reg settings.

I ussually set Quickmneu up the way i want on phone.

Then i use the attached taskmanager/registry editor ;)
To export the whole set to RGU file.

Wanna make a fake "official" HTC Touch Rom, that mimics all those things found in the WWE WM6 Rom, but instead with WM6.1? Just I mean like that basics. The touch keypad and keyboard, the original touch cube, and home today plugin, taskmanager, and all those fun things Pretty much the one from dopodasia.com but with Wm6.1 instead? That would be awesome...thanks dude!

Haven't added Keyboard Package.
And to be honoust i'm not planning to.
The Keyboard Sucks and cuases memory leaks when used a long time in MSN.
I've been using Touchpal free version with better results in typing.

Anuway you can download the kitchen and add all the elements you have mentioned.

No requests "DIYS" (Do It Your Self)
I'm not trying to be an ass, it isss that simple and it will get simpler.

[Noonski]

Well Here's another one i haven't done anything special on.

(But add some packages i need to fix and find the mistakes in the ROM;)
(Like i said i'm building everything from scratch again)

But this version is CU compliant.

I'm adding a package to this post tat you can put on your "Storage Card"

But before you do so you need to get your pim.vol from your rom with total comander or any other real frile explorer.

Because you will need to add it to the Cabs folder.

Why?

pim.vol holds your apointments ant outlook contacts. (And i'm not posting mine ;))

This way they'll be back after flash.

Just extract the attachement.

Place SDconfig.txt on root of SD and place Cabs folder also on root.

Add your own pim.vol.

Or remove the lines:

CPY1:\Storage Card\Cabs\PIM.VOL
CPY2:\PIM.VOL

from theSDconfig file.

And here's the Test Rom
http://rapidshare.com/files/91821116/RUU_Signed0.2.7z

[cstewart]

Noonski blazing the trail again with CU compliance! Woot, woot!

This new CU strategy will really simplify the post flash tasks.

Nice work Noonski!

[200mpx]

Have flashed your last beta ROM. Seems to be fast and work fine on elfine.

The probleme: can't find Camera :(

And also it is not a clean rom, the Home,the Cube, Office etc are still there.

The CU compl seems to be working but I has a lock up when trying to use HIDE thing

[Noonski]

Have flashed your last beta ROM. Seems to be fast and work fine on elfine.

The probleme: can't find Camera :(

And also it is not a clean rom, the Home,the Cube, Office etc are still there.

The CU compl seems to be working but I has a lock up when trying to use HIDE thing

Yeah the new version was not clean.

I had to fix some stuff so i put it in there.
(Office shortcut, Byte counts for cube etc)

Home will stay in the rom and so will Word otherwise i will never get the rom to be more then 50 MB so i have to put something in there ;)
But i'm still thinking which app to replace the Cube swipe with that i have disabled in the final version.

TNX for the camera.

I just added

Directory("\Windows\AppButtons"):-File("Camera.lnk","\Windows\Camera.lnk")

to initflashfiles.dat

And shortcut that belongs in the \Windows\AppButtons folder is attached.
(edit, it's not attached it was allready in the rom only the initflashes line was missing)

Did it emidiatly.
TNX again

Please post the CU problem to the developers thread about this at:
http://forum.xda-developers.com/showthread.php?t=366337

I only posted the hide command because someone else mentioned it i hadn't tested it cuase i didn't need it.
Damn shame if it doesnt work. Maybe it needs a space somewhere.

[200mpx]

Silly question :) why on splash screen there is a 6.09 and not 6.1?

[Noonski]

Silly question :) why on splash screen there is a 6.09 and not 6.1?

Because it's less then 6.1.

It doesn't have The taskmanager (which i still have to remove correctly and make a seperate correct package)
It doesn't have sample music files.
It doesn't have stupid welcome center.
And it will only get less and less and slimmer and slimmer.. as far as stupid stuff goes like lazy provxml files that cpuld well be in intflashes or in rgu files.

(rgu files get removed from rom in new Bepe)
(Provxml files are larger and clutter up the windows folder.
The less is in the windows folder the faster everything gets and the less power it consumes.
Also some provxml files have values allready in the .hv files that can just as well be edited directly saving up again a few bytes.

Yes i'm greedy.

It's less then 6.1

Microsoft is only giving us more crap and just a little candy, F%^k 6.1.

Also some apps and drivers used are still from pre 6.1 builds as there is no official ELF 59.1999 build (keep writing it incorrect)

Oh wait i will add the old SPC splash screen and welcome graphics as seperate packages.
But i'll be uploading the WM 6.09 version (smaller newer) only tomorow and the updated kitchen with new Packs.

[Re-Mi]

Hey Noon,

Could you give me some directions in how to translate the rom you supplied in the kitchen, i replaced all 09 files with the 13 files (from bram's surface rom. The 09 files that couldn't be replace i changed the name to 13. I changed some redirects in ?? ( i can't find the file at the moment is was a xml sort of file)

The kitchen runs well (the first time*) and i can flash to rom to my elf, after that nothing more then the black mobilty screen)

*the kitchen gave an error the second and third time i used it. something with user.pl.

Greetz,

[zyncmaster]

hi Noonski,

Can you check the Settings>System>Task Manager.. it doesnt work and throws an error when invoked.

Thanks in advance.

[harry_01]

thanxs bro nice update

[zeflash]

Because it's less then 6.1.

It doesn't have The taskmanager (which i still have to remove correctly and make a seperate correct package)

It's less then 6.1

Microsoft is only giving us more crap and just a little candy, F%^k 6.1.



I would have to disagree - having a *proper* task manager included in the default ROM is a big step forward (at last). Even though it's less complete than other apps one can find elsewhere, it's also only one exe.
Compared to the comm managers that adds between 70 and 100 files in /windows, I'd say it's pretty minor.
Edit: ok I didn't understand your message properly - if you're planning to make it a package then I'm totally fine with it. Just make it checked by default :)

Anyway, I'll wait for your updated kitchen, with fixes & new packages. I wasn't able to find the esmertec version cloudyfa used in shadow 2.0 - 20070822.2.1 ... hope you manage to get it at some point :)

[bytespider]

hi Noonski,

Can you check the Settings>System>Task Manager.. it doesnt work and throws an error when invoked.

Thanks in advance.

Noonski has already explained that the application was removed, just not fully - so the link to the app is still there...

[zyncmaster]

Noonski has already explained that the application was removed, just not fully - so the link to the app is still there...

:rolleyes: sorry! it was such an obvious thing... thanks for pointing it out to me....

[bytespider]

Dont worry...I almost asked the same thing till I happened to read a few more posts.... Actually there are a few things broke...and extra "office mobile" folders...

Until Noonski finds hes happy with the "base" think this maybe the case for a few releases yet... no offence mr noonski! ;) hehe

[Noonski]

Hey Noon,

Could you give me some directions in how to translate the rom you supplied in the kitchen, i replaced all 09 files with the 13 files (from bram's surface rom. The 09 files that couldn't be replace i changed the name to 13. I changed some redirects in ?? ( i can't find the file at the moment is was a xml sort of file)

The kitchen runs well (the first time*) and i can flash to rom to my elf, after that nothing more then the black mobilty screen)

*the kitchen gave an error the second and third time i used it. something with user.pl.

Greetz,


Look for double PROVXML files BUILDOS doesn't give a warning about those and it ussually causes weird freezes after flash.

As for languge porting Bram's the man and I heard pkoper is doing some work on it to.
I have no experience in it.

[Noonski]

hi Noonski,

Can you check the Settings>System>Task Manager.. it doesnt work and throws an error when invoked.

Thanks in advance.

This is known and i know how to fix it.
It's allready in my do to list.

I would have to disagree - having a *proper* task manager included in the default ROM is a big step forward (at last). Even though it's less complete than other apps one can find elsewhere, it's also only one exe.
Compared to the comm managers that adds between 70 and 100 files in /windows, I'd say it's pretty minor.
Edit: ok I didn't understand your message properly - if you're planning to make it a package then I'm totally fine with it. Just make it checked by default :)

Anyway, I'll wait for your updated kitchen, with fixes & new packages. I wasn't able to find the esmertec version cloudyfa used in shadow 2.0 - 20070822.2.1 ... hope you manage to get it at some point :)

It will be seperate package in SYS folder.

Also some people like quickmenu and others like taskmanager with even more options and regedit.

I have his version but i haven't checked if i found all the registry entries yet.

Dont worry...I almost asked the same thing till I happened to read a few more posts.... Actually there are a few things broke...and extra "office mobile" folders...

Until Noonski finds hes happy with the "base" think this maybe the case for a few releases yet... no offence mr noonski! ;) hehe

Thing is i lost my old packages and kitchen. And since i started again and there were new bases i set out to remake everything and do it a bit more strucutal.

So some things are still meant to be fixed and they shouldn't be to hard but ifocus on specific things first.

And there's more. I still don't have High speed internet at home (which in a way is good as it stops me from keep on going till i fixed everything)
So when i have something ready i can't go back and fix it before uploading, whioch i'm doing at the end of the day at work not to kill everyone's bandwidth ;)
And i can't be ficing stuff at work even if my work is WINCE related.

So right now the new Version (Slimmer again) will have an issue with Contacts/Random Acces (which i can fix with a cab over the weekend which gives a nice way to test CU SDAutorun )

Here it is BTW:
http://rapidshare.com/files/92086945/6.08.0.27.0S.7z
And i just made the contacts fix (http://forum.xda-developers.com/attachment.php?attachmentid=70784&stc=1&d=1203099212) (It's attached).

Removed Cube Again.
Put back in SPC welcome screen.
(As now the welcome screen has become option in SYS folder Package for kitchen which is also being uploaded)
Also with the Kitchen being uploaded anyone can chip in updating Drivers/DLL's, everyone can find what i did wrong or just haven't had the time to do yet.

Eventually this thread will just be a ROM thread.
An old fashioned SPC rom thread. So yes there will not be a ROM start menu everything will be as much as possible on the SD card.
But there still need to be some Fillers for the 50MB limit.
But the main difference is that every suctimisation i put in because i like it, can also be disabled by using the klitchen.


And BTW Cooking Issues can now be taken the SuperProCore (http://forum.xda-developers.com/showthread.php?p=1928343&posted=1#post1928343) Thread.
Bepe Suplied the Kitchen, we fill it with the Yummie.


And one more little Thingie.
Below you will find NetFrontBrowserBeta3.5HardcodedToInstallToSDCArdEd ition.Cab
Get it before i have to remove this geneticly manipulated freak:

http://rapidshare.com/files/92132160/NetFront3.5Beta.CAB

I'm Of Home No I-Net For the Weekend.

[zyncmaster]

Flashing your new rom as i type this.... :) good to see ur work coming up for dload frequently... i'm havin a gr8 time understanding the tricks of the trade, so to say!!! :rolleyes:

[Noonski]

Flashing your new rom as i type this.... :) good to see ur work coming up for dload frequently... i'm havin a gr8 time understanding the tricks of the trade, so to say!!! :rolleyes:

I'm also having a great time learning new tricks.

Like deleteing the ROM because it contained something that should not be in there.

[zyncmaster]

Like deleteing the ROM because it contained something that should not be in there.

what's was the problem? any description would be nice Noonski... :)

[Noonski]

HTC Voice Recorder (http://rapidshare.com/files/93104785/SPC_HTC_Voice_Recorder_SD.cab)
HTC Network Wizard 1.1 (http://rapidshare.com/files/95488777/SPCeed_HTC_Network_Wizard_1.1.cab)
MS Bubble Breaker (http://rapidshare.com/files/93104027/SPCeed_MS_BubbleBreaker.cab)
MS Solitaire (http://rapidshare.com/files/95211648/SPCeed_Solitaire.cab)
HTC Audio Manager (http://rapidshare.com/files/93103276/SPCeed_HTC_AudioManager.cab)
Synchro Time (http://rapidshare.com/files/93106488/SPCeed_SynchroTime.cab)
Touched Total Commander V1.0 (http://rapidshare.com/files/93906793/SPC_Touched_Total_Commander.cab) (Good Guys Wear Black)
SPCeed TaskManager+Regedit (http://rapidshare.com/files/93712707/SPCeed_TaskManager___Regedit_1.0.cab)
GlyphCacheSettings Pack (http://rapidshare.com/files/95193782/SPC_GlyphCacheSettings.cab)
Flash Lite 3.0 (http://rapidshare.com/files/96824631/SPCeed_Flash_Lite_3.0.cab)
GoogleMaps 2.0 SPCeed (http://rapidshare.com/files/97339718/GoogleMaps.CAB)
(yes weird text in the launcher but it works)
Adobe Reader 2.0 LE SPCeed (http://rapidshare.com/files/98320863/SPCeedAdobeReader.cab)
Skype SPCeed (http://rapidshare.com/files/102090776/SPCSkypeForPocketPC.CAB)What?

When the Rom is finished and after the two weekly Release candidates, it will be an old fashioned SPC rom.
Which means most applications will run from SD card.
So if you don't need an app you don't install it.

The thing is you only install the CAB once.

Yes Once.

It is hardcoded to install to SPC\Windows\etc... Folder on your SD card. And since Quickmenu qill work with a Programs folder on your SD the App will always be there after you Update SPC rom.
And in some cases the App will always work from SD.
Some apps need specific Registry settings pointing to it to work correctly, in those case the rom will have them precooked.

The Rom may not be finished but you can allready begin installing Apps that will pop up after flashin SPC. Those of you that still have the old SPC Add ons can keep using them. The Cabs wil NOT overwrite or update those.


Changed the Cab's:
Shortcuts will also be installed into the default Start Menu, so the cabs can be used anyway you want.

[pkoper]

Hey Noon,

Could you give me some directions in how to translate the rom you supplied in the kitchen, i replaced all 09 files with the 13 files (from bram's surface rom. The 09 files that couldn't be replace i changed the name to 13. I changed some redirects in ?? ( i can't find the file at the moment is was a xml sort of file)

The kitchen runs well (the first time*) and i can flash to rom to my elf, after that nothing more then the black mobilty screen)

*the kitchen gave an error the second and third time i used it. something with user.pl.

Greetz,


I completely failed on this one. Maybe Bram or Bepe can help.

Not only the mui's need changing. I only managed to translate 10 to 15 % of the rom.

The mui rplacement method definately does not work with this one.

[Noonski]

So i'm wondering how did the Pre config work?

Did Touchpal get installed after flashing the new rom?

Also has anyone allready copied his original pim.vol first and replace it with the blank one that gets installed into the "\Storage Card\Cab"

;)

And most importantly did WMP start with the touch skin even without having the actuall skin in ROM.

I know it works for me...... but......

[200mpx]

Could you please add for your next RC or release HTC_Enlarge Menu in your kitchen?

[Noonski]

Could you please add for your next RC or release HTC_Enlarge Menu in your kitchen?


You Mean
http://forum.xda-developers.com/attachment.php?attachmentid=58137&d=1195040605
Extracting the Cab Now......

Getting new UID

And....

Attached and will be added to next Kitchen version but.... not selected i work with Quickmenu working of a predefined Start Menu from SD with more Control Panel Options ;)

So i have added a Security file so people won't install it together with Quickmenu.

And i now now where that lonely StartKey came from in one of the OEM folders.
So when i get home i need to not forget:
1. Remove startkey from OEM folders.
2. Add security File to Quickmenu Packages.

[200mpx]

Thank you, the Enlarge menu seems more convenient to operate with fingers than quick menu

[Noonski]

Hey it's an understandable personal choice.

That's more reason for me to make a kitchen along with the rom.

Personally i have loads of apps on my Strage card and find my own Control Panel Shortcuts which bring me to the exact place very handy when i'm constantly changing settings ;)

But if there's any more request don't hesitate, just post the CAB and i'll trow it through my favourite vooking app.

WINCECABManager.

Also for UC compliancy it's easier to make a small 1k cab with personal settings instead of an XML file that mostly fails to change the settings.

[NunoLuz]

Hi,

I have an Elfin, and when I try to update it reaches only 3% and then reboots and gives the following error:

"The image file is corrupt. Please check your update utility."

I have downloaded the ROM from several mirrors, but keep getting this error.

BTW I have a chinese ROM installed and IPL/SPL 2.20

Can anyone help??

Thanks
Nuno

[Noonski]

Hi,

I have an Elfin, and when I try to update it reaches only 3% and then reboots and gives the following error:

"The image file is corrupt. Please check your update utility."

I have downloaded the ROM from several mirrors, but keep getting this error.

BTW I have a chinese ROM installed and IPL/SPL 2.20

Can anyone help??

Thanks
Nuno


Both IPL & SPL are version 2.2??

First flash back the Chinese Rom.
Then Flash USPL 1.111
Then flash 1.7 SPL IPL stock ROM.
Then Flash USPL 1.111 again.

Then start flashing Custom Roms again.

Stay of the original roms espescially when they contain new IPL after 1.7

I don't trust IPL 2.2

But the first test would be.... Does another Custom Rom Flash without this Error (Because then the NBH might just indeed be corrupt)


OEPS missread you have an ELFIN,......,

Sorry no advice in that case, i have no experience with ELFIN's

[Noonski]

Added the awaited NetworkWizard Cab.

Handy for any rom.

[AsusFreak]

First of all:
big thanx for this great work, Noonski.
Stable, fast, less memory needed - my personal favourite. Before this I preferred PDAVIET TouchROM_2.61.808.28B_B19199_WM6.1_Elf.

For me as a navigation software and opera 9 user it's my target to get as much as possible program memory.
After disabling quickmenu (deleting the link in the autostart folder) and disabling the htc xpanel (registry) I got nearly 26 MB free.

Now I'm hunting for more:
Noonski, do you see any other possibilty getting more free memory (you said: Haven't even taken a look at Shaving of program memory usage yet)?

[Noonski]

First of all:
big thanx for this great work, Noonski.
Stable, fast, less memory needed - my personal favourite. Before this I preferred PDAVIET TouchROM_2.61.808.28B_B19199_WM6.1_Elf.

For me as a navigation software and opera 9 user it's my target to get as much as possible program memory.
After disabling quickmenu (deleting the link in the autostart folder) and disabling the htc xpanel (registry) I got nearly 26 MB free.

Now I'm hunting for more:
Noonski, do you see any other possibilty getting more free memory (you said: Haven't even taken a look at Shaving of program memory usage yet)?

Yeah get it working on 4MB pp to start with.

And disable Glyph cache Filter Cache and euh another one.

There still are some services to kill (like you said Xpanel should have allready been gone)

But my main focus for now is going to be Word and Office not working correctly. I'm going to make a package from the iofficial MS installer.

If you can post which reg you deleted i can make a seperate package for inside the kitchen.

[AsusFreak]

Disabled - not deleted.

HKLM\Software\HTC\XPanel
Enable = 0x0

[Noonski]

Word Save Fix (http://forum.xda-developers.com/attachment.php?attachmentid=71672&stc=1&d=1203528658)

Nuf Said

Thanks to Microsoft for making their .msi files extractable.
(althought i had to learn the commands and i thank google for that)

[CarlosT]

Disabled - not deleted.

HKLM\Software\HTC\XPanel
Enable = 0x0

I'm sorry but what exactly does disabling "XPanel" do? I mean what is the "XPanel"?

[Noonski]

I'm sorry but what exactly does disabling "XPanel" do? I mean what is the "XPanel"?

Methinks it was part of HTC X Close Taskmanager.

And it should do nothing. OR better said anything that isn't running, isn't eating memory. And any thing that can be disabled without problems can also be removed.

And i again i'm probaply talking shit here but i think Xpanel logged the apps that where open for X-Close.

But have you ever heard of Slide-Tab?

It's something very simple and stupid and never seen in a Touch.

Whoever geusses it before it comes in the next version wins a No-Prize.

[bytespider]

If its never seen in a touch then I've definatly never heard of it! :)

[cstewart]

I tried looking around for "Slide-Tab" ... it is mystery to me. I am not going to be getting the No Prize.

[Noonski]

If its never seen in a touch then I've definatly never heard of it! :)

Feck

Just uploaded RC2 but had to remove it Freeze On Boot.

No More 32 Bit PNG Splash Screens Dammit.

Making new Build

And since it will hopefully be allright in ten minutes.

I have re-enabled the Cube Swipe and replaced the function with ALT-Tab.

Very simple adjustment and less anyoing if you do it by accident.
Ever since i got rid of cube i was thinking of what to replace it with.
Also had to put back 10 button Com Manager because otherwise i wouldn't make the 50MB minimum limit.

PLease don't forget to run Updated SPCPreConfig Again. it will only update the needed files.

Flash looking good getting Welcome Wizard......

Pfew It's rebooting after SD Autorun, It's a Boy.

Now Uploading........

Office Fix No Longer Needed....

Wel it works for me

Good luck

http://rapidshare.com/files/93729613/SPC_6.09.RC2.2B.zip

[Switchcorp]

The Touch commander cab is no more available !

It was quite troublesome to install the rom over a 3.00 SPC ! I was SPL 1.11 but I re-do the complete procedure ... and it was not a good idea !

Doesn't know why but it was only flashing the SPL each time ...

But now i'm good after smart plays with your files :p

Wow i've just reboot my device (first i had only 20 mb free ram) and now i'm at 26 mb ... that's higher than the SPC 3.00 !

Now i'm getting back my memory soft like PocketCM,... and some of your old app's (that's why i wrote this msg because i don't have the touch commander anymore).

Now i'm on my way for calendar+ :)

[Switchcorp]

Oh what an impolite i'm !

Thank you a lot for your work Noonski ! I hope that you'll customize this rom like the previous one .. and it'll be for sure the ultimate rom ( like csteward said the swiss army knife)

[Noonski]

The Touch commander cab is no more available !

It was quite troublesome to install the rom over a 3.00 SPC ! I was SPL 1.11 but I re-do the complete procedure ... and it was not a good idea !

Doesn't know why but it was only flashing the SPL each time ...

But now i'm good after smart plays with your files :p

Wow i've just reboot my device (first i had only 20 mb free ram) and now i'm at 26 mb ... that's higher than the SPC 3.00 !

Now i'm getting back my memory soft like PocketCM,... and some of your old app's (that's why i wrote this msg because i don't have the touch commander anymore).

Now i'm on my way for calendar+ :)

Hm Ussually the way i flash is skip the whole USPL thing.
I go into Bootloader take out my Nifty 8G(only60Euro)SDHC card.
And flash directly with normal update.

Anyway I was so enthousiastic yersterday with the new release of Battery status 1.5 and 0.05 that i made OEM packages for these and i made a ;) Nightly Build of SPC and damn i was amazed.
So i'm uploading one Nightly build version in a moment with BTStatus Set to 247 (for Safety)

As for Cabs

You can PM me with your Personal Cabs or post them here if they are FreeWare and i can adjust them For SD use as for commander let me see.

As For PocketCM (Contacts or Keyboard?)
Have you tried TouchPal?

NIGHTLY BUILD (http://rapidshare.com/files/93905272/RUU_signed.7z) (Meep Meep Vrooooooommmmmmm, OS 50.1MB OC 299MHZ VroomVroommmmmm, Ariba Ariba)

Total Commander Untested Installer (Tested Seems to Work Updated Link) (http://rapidshare.com/files/93906793/SPC_Touched_Total_Commander.cab)
(I don't know why i deleted the previous upload sorry bout that)

Feck Modda Feck

Wrong WLM Build. (Easy Fix)(Remember i've been building the whole Kitchen From Scratch)

[Re-Mi]

Noonski,

Because the rapidshare doesn't support your beloved packaging system 7zip :P microsoft introduced SkyDrive (http://skydrive.live.com/) 5 GB online storage but one catch max filesize is 50mb but you could split your files. And i hope (didn't tested yet) they don't have the waiting line time limit and the hour waiting after downloading a file

GReetz,

[Noonski]

Rapidshare supports 7z

XDA doesn't.

And when i'm home Uploading to XDA over GPRS fails everytime.

But i could zip but haven't heard Anyoneone complain luckelily ;)

I'''l check the Drive Thingie would be fun using MS to Upload Modified MS OS.

[zyncmaster]

And i hope (didn't tested yet) they don't have the waiting line time limit and the hour waiting after downloading a file

Or you could buy a Rapidshare premium a/c... it's really cheap!! :rolleyes: You can dload real fast without any hassles... :D

rapidshare doesn't support your beloved packaging system 7zip


Re-Mi... what did you mean by the above statement! :confused:

[Re-Mi]

Re-Mi... what did you mean by the above statement! :confused:

I ment, that i wasn't informed right.. my bad sorry for it.

But noonski did got my point, upload modified MS stuff to an MS server sound funny

Greetz

[Noonski]

Ey you two (RE-Mi & Zync) seem to be real Flash Addicts.

I haven't had the time to Check the new Shadow 2.1 versions.

How they Doing?

[zyncmaster]

hi Noonski,

i've been running the Shadow 2.1 CE for some days now! I'm impressed... Probably my early observation with the first test wm6.1 rom (not at all customized) tht surfaced at xda was actually correct! Recently you also verified the same... wm6.1 is definitely faster n more stable. I've keenly followed all your releases, flashed each one of ur roms.... ;) must admit these are exciting days... :D
I think both you and Cloudyfa have offered us solid roms! U guys are making real progress here... :)

I think "SPCeed" is now a brand in itself!!! :cool:

[cstewart]

Noonski, where do we find the link for "install the SPCPreConFig.Cab"? Is there a link from the red title that is missing? From your instructions on the first post, this should be done prior to entering bootloader and flashing the RUU-signed.nbh, correct?

Coming from SPC 3.0x, are there any parts of SPC 3.0 on the SD card that are no longer needed? I am looking forward to ditching the annoying cube.

So Slide-Tab basicly works like Alt-Tab on the PC allowing the user to switch between applications that are running in the background?

[AsusFreak]

Hi Noonski,

thanx for your great work.

I flashed your nightly build and get some problems.

First: Batterystatus doesn't want to give mobile operator, cpu clock etc. information. All changes in the options menu of batterystatus failed.
Edit: If you use the config via traybar it_s working. In the settings-today-items-options menu it's not working....

Second:
In your RC1 it was quite easy to disable quickmenu - just deleting the link in the autostart. After this I tried to install HTC Enlarge Menu. In your RC1 everything was perfect. In this nightly build the installation went fine but selecting programs or settings have no result. Seems to lose the total folder structure.

Third:
PHM Registry Editor does not work. The tree structure is shown but selection of values is not possible.

Any recommendations?

[Switchcorp]

Hm Ussually the way i flash is skip the whole USPL thing.
I go into Bootloader take out my Nifty 8G(only60Euro)SDHC card.
And flash directly with normal update.

Anyway I was so enthousiastic yersterday with the new release of Battery status 1.5 and 0.05 that i made OEM packages for these and i made a ;) Nightly Build of SPC and damn i was amazed.
So i'm uploading one Nightly build version in a moment with BTStatus Set to 247 (for Safety)

As for Cabs

You can PM me with your Personal Cabs or post them here if they are FreeWare and i can adjust them For SD use as for commander let me see.

As For PocketCM (Contacts or Keyboard?)
Have you tried TouchPal?

NIGHTLY BUILD (http://rapidshare.com/files/93905272/RUU_signed.7z) (Meep Meep Vrooooooommmmmmm, OS 50.1MB OC 299MHZ VroomVroommmmmm, Ariba Ariba)

Total Commander Untested Installer (Tested Seems to Work Updated Link) (http://rapidshare.com/files/93906793/SPC_Touched_Total_Commander.cab)
(I don't know why i deleted the previous upload sorry bout that)

Feck Modda Feck

Wrong WLM Build. (Easy Fix)(Remember i've been building the whole Kitchen From Scratch)

My problem was to get the bootloader mode (i didn't remember that i had to do something lol) ... so i used your USPL unlocker to crash my Touch to bootloader mode Yeaaah ! It's quite dangerous method i know ;)

It seems that i've always had Total Commander in my SPC/Windows/programs but the link in the start menu for file explorer has changed between SPC 3 and this version and I can't change it anymore (it remains on the same value if i change it).

It seems that i've probably a problem ... with Certs (for example i can't open SDconfig because i don't have cert's).

I've installed the SPC package first but there are two of them ( one 1... and one 2...) Maybe have i go wrong !

In my cabs folder i've the Touchpal cab (i was already been using it before) but it doesn't install by itself ! Wasn't it a UC feature ?!

I think that i'm a bit lost :p

[brooks.nl]

noonski,
could you plz post some screenshots of ur rom?
thanks in advance

[Noonski]

noonski,
could you plz post some screenshots of ur rom?
thanks in advance


Oke a quicky,...

As there's nothing SPCial about it haven't done anything with graphics.

Oke it's i lie. But must people won't even find what i've change.

My problem was to get the bootloader mode (i didn't remember that i had to do something lol) ... so i used your USPL unlocker to crash my Touch to bootloader mode Yeaaah ! It's quite dangerous method i know ;)

It seems that i've always had Total Commander in my SPC/Windows/programs but the link in the start menu for file explorer has changed between SPC 3 and this version and I can't change it anymore (it remains on the same value if i change it).

It seems that i've probably a problem ... with Certs (for example i can't open SDconfig because i don't have cert's).

I've installed the SPC package first but there are two of them ( one 1... and one 2...) Maybe have i go wrong !

In my cabs folder i've the Touchpal cab (i was already been using it before) but it doesn't install by itself ! Wasn't it a UC feature ?!

I think that i'm a bit lost :p


Check if there are spaces behind the line that's supposed to instal touchpal right after the .cab

And hey i stole that USPL from another ROM gehehe

I'll recheck the package.

Bootloader is Reset with stylus and hold camera button.

Jep i'm not replacing the default Explorer link in the rom it might piss poeple of.

But you could ad a copy command to SDconfig.txt to copy it from SD to Windows\Start Menu\

It seams there are a few important rules to using SDconfig that are being ironed out by Sleuth over at his thread.

Noonski, where do we find the link for "install the SPCPreConFig.Cab"? Is there a link from the red title that is missing? From your instructions on the first post, this should be done prior to entering bootloader and flashing the RUU-signed.nbh, correct?

Coming from SPC 3.0x, are there any parts of SPC 3.0 on the SD card that are no longer needed? I am looking forward to ditching the annoying cube.

So Slide-Tab basicly works like Alt-Tab on the PC allowing the user to switch between applications that are running in the background?

You can keep the old SPC folder structure it still works but i haven't aplied file open operations for Adobe Reader and Flash lite yet.

The pre configure was in the package in the first thread not in nightly build i just posted that because it rocks. Yeah i shouldn't say this myself but it's prolly the fastest 6.1 rom (cheater is me with BTstatus)

Pre configure at the moment is needed so i can apply Modifications to the Folder structure and links.

So it will overwrite incorrect links from SPC 3.X version that are no longer valid if i'm correct but it won't touch parts you change in Cabs folder.

I still need to do a lot and there's simply not enough time.

Preconfrig is needed at least opnce, but is still need to correct a few links and ad a few more.
I'll also be adding some cabs to change the three cache settings.
There will be a final version of Pre Config.

Because there are still some ROM files that work great from SD and will be in preconfig, and i need the space for one more app that only runs from ROM.

So using no cache at all will prevent Memory leaks albeit not really present so just more memory but nothing to write home about.
And it will make the device slower.

And higher Cache values for more speed, which it also doesn't need.

If it's not installed.

But you could rename the old SPC folder because i'll be updating everything the coming weeks.
And everything will be back and hopefully with more and more greyscale icons (if people like them)

At the moment for a SPC 3.0 user i would suggest.

Rename old SPC folder to SPC2.
Install preconfig first.
Go to Bootloader and flash.

If any of the old apps are missing from new structure don't hesitate to request them i can make new cabs for these pretty quickly accept for RSS reader/Flash/and Reader.

As for Today Agenda i'm going to do some test with that it seems to be buggy.

[abendx]

noonski. what program are you using to make the icons in the start bar expand when you touch them... (the new mail icon, battery, volume, carrier signal, etc.)?

[gsidhom]

Please Guys can someone say his last conclusion on this last rom, and post some screenshots for this ROM

[Noonski]

noonski. what program are you using to make the icons in the start bar expand when you touch them... (the new mail icon, battery, volume, carrier signal, etc.)?


QuickMenu.

I think i allready wrote that?

It's Quickmenu and it isn't working with the default Controlpanel and Start Menu.

It's working with a replicated Folder configuration.

So i made shortcuts to each setting app with a small extra command to open an specific tab for that control panel item.

I then went in a shellres.96.dll or something and looked up the location of that icon so it would show on the shortcut.

Some goes for every subfolder in the menu.

They contain an icon.lnk file pointing to again an icon from shellres.dll.

Now i have been patching and playing around with some apps like total commander and replacing the icons in the icons with greyscale versions.

And i'm planning to do the same with the Default Windows .dll files maybe.

But they don't like that to much so i have to learn about that some more.

[Noonski]

Please Guys can someone say his last conclusion on this last rom, and post some screenshots for this ROM

Mine is that it isn't finished.

Because right now i'm going to look at why WLM 10.6.0032.2100 isn't working in WM6.1 (same package i've been using and worked before WM6.1). And why 10.6.0031.2600 does work.

Which is the last official release. Yeah look at the numbers i want a version that wasn't release officially to work but somehow it all of a sudden it doesn't want to.

31 Saves the contacts to phone and if you choose not to your Contact list will be empty. So you better choose to save them to phone ;)
And then when you switch accounts it first has to remove them again.

10.6.0032.2100 doesn't do that. If you choose to not save contacts to phone contacts they will still show up in friends list.

But the mystery It ain't working.

So i'm going to compare both registry files from those versions and find out wht the difference is.

To see if i lost a few lines or just other differences.

Because i like running those little Builds that never get released officially.

Just go to HTC site and download that version it will be 10.6.0031.2600.

Now i''ve seen an ever newer build of WLM but i want 32 to work.

As for screenshots i posted one two posts back.

Why not just flash it and see for yourself....

I flash at least three times a day, other Roms to.

And then post what you find and try to find something i don't know about.

Because it the rom does contain JAVA just not as a shortcut.

I just haven't come around that so i hid it for those that want to test if It works.



Found the issue hopefully with WLM.

It was my stupid head.

I'm now removing Backlight settings from OEM folder and Shortcut to WMP.
Moving both to SD card.

I like my rom Stripped and Windows clean.

Next up time to remove SQM.

[abendx]

QuickMenu.

I think i allready wrote that?




I think we are talking different places. Not the start menu, but the upper bar where the start icon resides (click start, get the start menu... or on your ROM, the quick menu). I was referring to next to the start menu button, the icons for GPRS, Carrier Signal strength, Sound, Battery, Clock, New Mail, etc.. In you ROM, when you touch that area, an expanded bubble drops down and you can pick the icon you wanted. *MUCH* more finger friendly. I killed the quick menu because I didn't like it, but the function I am talking about still worked.

http://img299.imageshack.us/img299/8040/testbk0.jpg

So... press the area where the arrow points to and you will get a bubble drop down with all of the icons in that area but three times the size. Killer feature!

[Noonski]

I think we are talking different places. Not the start menu, but the upper bar where the start icon resides (click start, get the start menu... or on your ROM, the quick menu). I was referring to next to the start menu button, the icons for GPRS, Carrier Signal strength, Sound, Battery, Clock, New Mail, etc.. In you ROM, when you touch that area, an expanded bubble drops down and you can pick the icon you wanted. *MUCH* more finger friendly. I killed the quick menu because I didn't like it, but the function I am talking about still worked.

Would some screen shots help?

Aaah Taskbar Zoom From HTC. Extracted and posted by JUVS.
It can be found as a cab in a sticky over at development and hacking.

Get ready to live in a world where The windows regular Start menu is completly emtpy and you get control over the files ussually Stuck in ROM with archive flasg so you can't delete them cause they are in ROM.

Just so i can hit my 50.00 MB OS to make it as fast as possible.

Speed
Power
Control over which versions and Exes you use


Sorry for the missunderstanding.

OS size is 50.0 MB (52,494,336 bytes) again.

[abendx]

Aaah Taskbar Zoom From HTC. Extracted and posted by JUVS.

Sorry for the missunderstanding.



No problem. :) Your ROM is starting to take shape!!

[Noonski]

No problem. :) Your ROM is starting to take shape!!
Now going to test New Rom

50.0 MB (52,428,800 bytes)

SQM removed and MXIP_Notify.vol replaced with WM5 version from completly different device as ELF never had WM5.

And also completly removed Customer Feedback..
Let's see how badly this is going to fuck up the rom.

And if it hold out it means less service running or getting started.
And another Phone HOme Backdoor removed.

Yes it sounds paranoid but if the phone works wothout it why leave it in?

right.

Also changed Battery status Icon to greyscale.
Crossing my fingers here good thing i'm not uploading these versions ;)

[cstewart]

50.0MB exactly?!? How did you manage that?

Apparently no sleep is needed in the land of Coffee Shops.

[Noonski]

By removing SQM deviceinfo.exe backlight.exe and.... euh

Can't look it up right now.

But removing SQM looks like failed experiment for now.

Let's just call it dumb luck.

[Swiftblade]

By removing SQM deviceinfo.exe backlight.exe and.... euh

Can't look it up right now.

But removing SQM looks like failed experiment for now.

Let's just call it dumb luck.

Hi Noonski,

SQM is more integrated WM6.1 than expected. No problem in removing it WM6.0. A number of integrated apps failed to start properly if the SQM folder is totally removed. You can try to just disable the services instead.

[AleXandeR 1104]

Who can give me link on this ROM ?

[Noonski]

Hi Noonski,

SQM is more integrated WM6.1 than expected. No problem in removing it WM6.0. A number of integrated apps failed to start properly if the SQM folder is totally removed. You can try to just disable the services instead.

Gehehe i ran into that indeed. (It Cost me some good night sleep)

So i disabled it.

Even Cust Experience is being started up somewhere else besides init.vol

Here's a link
http://rapidshare.com/files/93729613/SPC_6.09.RC2.2B.zip

I'm almost finished and i've got a new perfect 50 MB version running now.

[suracha]

I'm almost finished and i've got a new perfect 50 MB version running now.

Let's figure out how to go lower than 50MB, that's much fun.

[Noonski]

Aahhh man now your going to hardcore..

Tha means Patching the Bootloader Way out of my leageau.

What about File delete in ProvXML after flash?

Never tested it.

But right now 50MB is nice enough.

I still don't need the Space on ROM.

[zyncmaster]

TMNL2.26 what is it Noonski? :confused:

[cstewart]

Original T-mobile Nl Touch 128mb (elfin) 2.26 Update Ipl+spl+radio+radio+ext_rom

[zyncmaster]

Original T-mobile Nl Touch 128mb (elfin) 2.26 Update Ipl+spl+radio+radio+ext_rom

Thanks cstewart... :)

[Noonski]

what is it Noonski? :confused:

Yup uploading Full version, Just Radio and Stripped version tomorow.

Looks like there's some new stuff to strip to.

Completly new Java and some extra stuff but i don't have time to test.

Someone else posted the link but HTC needed the Serial.

Now it's for everyone.

BTW the one i have is for 64MB ELF.

I don't have serial for ELFIN.

[AsusFreak]

Hi Noonski,

got trouble with your RC2.2B.

In your ZIP-File you provide two different nbh-files.
Both did not work. And I looked at your readme...

Result:
Boot screen of my provider O2, then freeze.

Had the same problem with one nbh file in RC2.1B.
Only the one in the RUU folder worked well the other in the root directory caused a freeze.

Any hints?

[Noonski]

I'm Back to just on RUU_Singed.nbh file in the version i just uploaded to first post.

Be sure to run new Preconfig.cab

[zyncmaster]

I'm Back to just on RUU_Singed.nbh file in the version i just uploaded to first post.

Be sure to run new Preconfig.cab

Cant get to dload from Rapidshare.com... Can anyone confirm this?! :confused:

[Noonski]

Cant get to dload from Rapidshare.com... Can anyone confirm this?! :confused:


You mean

http://rapidshare.com/files/95025019/SPC_6.09.SP0.0B.zip

It's been Downloaded 6 Times allready and i'm downing it now.

[zyncmaster]

You mean

http://rapidshare.com/files/95025019....09.SP0.0B.zip

Yes Noonski... no probs! Never mind i'll check later... :) seems like Rapidshare.com itself is not available at the moment! :confused:

[cstewart]

Yes Noonski... no probs! Never mind i'll check later... :) seems like Rapidshare.com itself is not available at the moment! :confused:

Zincmaster ... I just downloaded from Rapidshare (less than 2 minutes + the wait time to start).

[Noonski]

http://www.megaupload.com/nl/?d=K8P15XNV

Mirror and repeat

INSTALL PRECONFIG.

IT puts blank empty welcome.not file on root of SD.

After flashing welcome wizard will be skipped and Screen alignment will be aplied through Autorun.

If your not using TimeSync yet to set your time to Atom Clock now is the time to start doing it.

Please report any problems with Screen alignment so i can Take it out if needed.

[cstewart]

http://www.megaupload.com/nl/?d=K8P15XNV

Mirror and repeat

INSTALL PRECONFIG.

IT puts blank empty welcome.not file on root of SD.

After flashing welcome wizard will be skipped and Screen alignment will be aplied through Autorun.

If your not using TimeSync yet to set your time to Atom Clock now is the time to start doing it.

Please report any problems with Screen alignment so i can Take it out if needed.

Installed Preconfig,
Flashed (took out SD card)
SD card reinstalled on early reboot
Windows Customization Screen hangs on about 30% of "Initializing".

Soft reset

Back to Customization Screen, at about 20%, phone resets itself

Back to home screen, hangs on "It will automatically customize your device in 3 seconds ..."

[Noonski]

No Good.

I'll stay at work for a little moment to see if this keeps happening.

So i can remove link from Rapidshare.

I flashed this Rom so many times.

So there's always this scary moment.

Has the Theme changed during Custimizing?

Reflashing Rom Also To Phone.

Good Thing I packed My Kitchen to SD Card.

Try a Hard Reset "Green Red Button and Reset Button" then Middle Enter Key to Format"

[cstewart]

Installed Preconfig,
Flashed (took out SD card)
SD card reinstalled on early reboot
Windows Customization Screen hangs on about 30% of "Initializing".

Soft reset

Back to Customization Screen, at about 20%, phone resets itself

Back to home screen, hangs on "It will automatically customize your device in 3 seconds ..."

Hard reset,
Completed "Initializing"
Email setup screen hangs ons entering email.
Soft reset
Back to Home screen and SPC 6.09 seems operational. Will be checking it out today.

I am not able to copy PIM.VOL back to the device root.

[Noonski]

Can you check the date of the PIM.Vol you have in Cabs Folder on SD?

(To check if it's still the version you made a back up of earlier)

AnyOne Else Out there having issues.

Two Hits means a Confirm to Pull it.

It shouldn't be flashing with problems.

I'm Right Here stewart hoping Everything went fine and ready to Up a New version..

[cstewart]

I copied PIM.VOL from the device root and placed in SD/temp for safe keeping. Should this have been placed in SD/CABS?

The date is today.

[Noonski]

I copied PIM.VOL from the device root and placed in SD/temp for safe keeping. Should this have been placed in SD/CABS?

The date is today.

Yup You should place it in Storage Card\Cabs\

Folder and overwrite the balnk one the preconfigure puts there

Preconfig will never overwrite ANY pim.vol present in that folder.

(Tested it)


Still weird that it freezes on E-Mail Setup.

Maybe it has to to something with OS trying to also look for networkwizard.

And i still need to kill that damned E-Mail Setup.

(Now removing whole SPC folder Structure and Cab Folder to re install and reflash, Trying to Duplicate Behaviour)
(Yes my job was Technical Support one)

Funny how the rate the Previous 6.09 Roms have been downloaded compared to 3.0X versions is a lot higher.

But still hardly no Posts with issues?
Even though They were Beta and Release Candidates.

[cstewart]

File explorer used to open total commander in SPC 3. Found TC and copied PIM.VOL over. Contacts and Calendar back.

So far so good.

Perhaps the problem is not getting the SD card back early enough in the startup sequence? I rushed to get it back in, but you never really know if it is soon enough.

[cstewart]

The OS found Network wizard automatically a few minutes after completing the installation and reinstalled the correct local settings.

Time and date were way off and I did not see the atomic clock settings you described earlier.

[Switchcorp]

I've tweaked it a bit ... by installing the Aurora Theme and some other things. It's running fast and i've 22mb free ram.

I used it this weekend with iGo and my gps and I had no problem.

I don't think that i'll immediately upgrade to the next rom because it requires some configurations (my "today" soft are on the internal memory) but it sounds promising !

It's always a pleasure to test and use your roms Noonski !

Now i think that i'll learn a bit more about UC to add some automatisation to my configuration ;)

[funman]

[quote=Noonski;1968244]Funny how the rate the Previous 6.09 Roms have been downloaded compared to 3.0X versions is a lot higher.quote]

I am waiting off till everything is good, as i like the old 6.0 as i have tried the 6.1 but i do not like the new txt!!! It is a pain in the butt, as i have over 3K txt, (I dont delete)

[Noonski]

File explorer used to open total commander in SPC 3. Found TC and copied PIM.VOL over. Contacts and Calendar back.

So far so good.

Perhaps the problem is not getting the SD card back early enough in the startup sequence? I rushed to get it back in, but you never really know if it is soon enough.

Changed First post according with SD timing.

That is the only real crucial part maybe after that i have been walking away from the device, make myself some tea and go to work.

As i'm now not using a SPC folder full of apps, because not everyone was copying over the files correctly i decided to not Make TotalC an integral part of the whole thing to keep preconfig small.

Preconfig gives me more certainty that the files are where they are supposed to be.

[Noonski]

The OS found Network wizard automatically a few minutes after completing the installation and reinstalled the correct local settings.

Time and date were way off and I did not see the atomic clock settings you described earlier.

Time and Date is something i haven't given priority.

But anyone that has the time to post the latest Reg keys with Date and Time i'll make a cab for SD autorun (or integrate)

Same goes for custom locales this can be put in a cab to run in SDautorun.

And i beleive it's worth looking into that as it isn't a big thing for a cook to integrate. Because even if someone without UC setup on SD card flashes UC rom it will reset after the regular Autorun.

[Noonski]

[quote=Noonski;1968244]Funny how the rate the Previous 6.09 Roms have been downloaded compared to 3.0X versions is a lot higher.quote]

I am waiting off till everything is good, as i like the old 6.0 as i have tried the 6.1 but i do not like the new txt!!! It is a pain in the butt, as i have over 3K txt, (I dont delete)

The threaded SMS is something i haven't removed.
Because even without looking at how to i have a feeling it's not an easy task.


BTW i reflashed twice now with new SPC folder and Cabs folder from last preconfig.
I could not reproduce it.
I've tweaked it a bit ... by installing the Aurora Theme and some other things. It's running fast and i've 22mb free ram.

I used it this weekend with iGo and my gps and I had no problem.

I don't think that i'll immediately upgrade to the next rom because it requires some configurations (my "today" soft are on the internal memory) but it sounds promising !

It's always a pleasure to test and use your roms Noonski !

Now i think that i'll learn a bit more about UC to add some automatisation to my configuration ;)

Did you Install theme through SdAutorun?
Because that one hasn't been working on all UC SD.

Knowing you you will prolly find the not working link in Settings >> Connections >> USB To PC....
Or another one.

What do you mean with "(my "today" soft are on the internal memory)" (Which is it)
Because a lot of configuration can be integrated.

Also there's allready a lot of stuff cooked in that isn't even enabled yet (But i just had to put it in to get the right size (OS was 49.1MB)

Like Java. But i just got hands on New Dutch Rom with very new Java Agent. So that's next on my list this weekend.
(also other new apps i haven't seen in a rom)


And as for Memory...

I have tested with no Cache at all but that does come back in slower performance and doesn't give back a lot of memory, but you do loose less.

Updated First post
http://forum.xda-developers.com/showpost.php?p=1902887&postcount=1

Yeah i'm actually filling the rom with exces stuff because it's been stripped to the second skin (not the bone yet)

[Switchcorp]

What do you mean with "(my "today" soft are on the internal memory)" (Which is it)
Because a lot of configuration can be integrated.

Also there's allready a lot of stuff cooked in that isn't even enabled yet (But i just had to put it in to get the right size (OS was 49.1MB)

I put all the plugins for my Today on the internal memory because if i withdraw my mSD it's a huge mess. (UltimateLaunch, rLToday, Battery Status with skin, Vista battery gauge, Today Agenda).

And i'm also clearing background folders like the SPC one because there are a lot of program's that i don't use :o

Noonski, do you know if the Systray bar can be removed ? (or if the Active Sync icon can be moved elsewhere ?). And is there a way to customize to Top bar ? (For example I want to remove the Data icon because i don't need, the windows battery icon and the network one).

[cstewart]

My free program memory is around 22 mb.

FYI, on initial startup, the start menu unfolds rather slowly (there must be some background tasks that are completing). After a short delay, the delay in display of the start menu is completely gone.

Is there a way to retain the email settings as well after flashing?

My guess on the minimum comments is that there are a bunch of people watching to see someone else sticks their toe in the pool.

After a minor hickup (I do think it was getting the SD card in place in a timely manner), all seems well. The OS does really seem to perform quickly. For me the test is contacts (as I have over 3,000). Search is very quick.

Did you include any of the cache (glyph) tweaks in this ROM?

[Noonski]

My free program memory is around 22 mb.

FYI, on initial startup, the start menu unfolds rather slowly (there must be some background tasks that are completing). After a short delay, the delay in display of the start menu is completely gone.

Is there a way to retain the email settings as well after flashing?

My guess on the minimum comments is that there are a bunch of people watching to see someone else put there toe in the pool.

After a minor hickup (I do think it was getting the SD card in place in a timely manner), all seems well. The OS does really seem to perform quickly. For me the test is contacts (as I have over 3,000). Search is very quick.

Did you include any of the cache (glyph) tweaks in this ROM?

E-Mail is also something i want to research, because you can preset the Email (as it is now) to a default folder on SD but it will also need extra keys in SDautorun to bind it completly (just a theory needs research)

Yes first start also runs Netwizard in background waiting for Phone conection and the e-mail wizard.
And i disabled cache seetings in Quickmenu making it start slower but preserving as much memory as possible.

As for those minimum contents i actually also meant to say that it's been downloaded more and more rapidly then previous roms.

Oooh 3000 contacts over active sync your Storage memory must be a bit smaller then. But SDautorun copy is quicker then Active sync.

[HKEY_LOCAL_MACHINE\System\StorageManager\FATFS]
"EnableCache"=dword:0
"CacheSize"=dword:4096
(So disabled so i should have set it to 0.
[HKEY_LOCAL_MACHINE\System\StorageManager\Filters\f sreplxfilt]
"ReplStoreCacheSize"=dword:4096
And glyph....

Euh that's actually set very low....
1024 (Nope it's higher 4096)
So if more speed is needed it can be brought up...

Also BTstatus is running in the background at 247 mhz.

I'll look it up and i'll make some cabs that will pop up in Quickmenu so people can easily fiddle around with these settings without going to regsitry. (Tonight)

[Switchcorp]

Oh yes and i forgot to say that i didn't use SDautorun for my theme ...

[cstewart]

E-Mail is also something i want to research, because you can preset the Email (as it is now) to a default folder on SD but it will also need extra keys in SDautorun to bind it completly (just a theory needs research)

Yes first start also runs Netwizard in background waiting for Phone conection and the e-mail wizard.
And i disabled cache seetings in Quickmenu making it start slower but preserving as much memory as possible.

As for those minimum contents i actually also meant to say that it's been downloaded more and more rapidly then previous roms.

Oooh 3000 contacts over active sync your Storage memory must be a bit smaller then. But SDautorun copy is quicker then Active sync.

[HKEY_LOCAL_MACHINE\System\StorageManager\FATFS]
"EnableCache"=dword:0
"CacheSize"=dword:4096
(So disabled so i should have set it to 0.
[HKEY_LOCAL_MACHINE\System\StorageManager\Filters\f sreplxfilt]
"ReplStoreCacheSize"=dword:4096
And glyph....

Euh that's actually set very low....
1024
So if more speed is needed it can be brought up...

Also BTstatus is running in the background at 247 mhz.

I'll look it up and i'll make some cabs that will pop up in Quickmenu so people can easily fiddle around with these settings without going to regsitry. (Tonight)

Yes my storage is smaller by 12.5 mb.

These are the registry settings that I was referring to. I have not yet tried these with SPC6.09.

[Noonski]

I put all the plugins for my Today on the internal memory because if i withdraw my mSD it's a huge mess. (UltimateLaunch, rLToday, Battery Status with skin, Vista battery gauge, Today Agenda).

And i'm also clearing background folders like the SPC one because there are a lot of program's that i don't use :o

Noonski, do you know if the Systray bar can be removed ? (or if the Active Sync icon can be moved elsewhere ?). And is there a way to customize to Top bar ? (For example I want to remove the Data icon because i don't need, the windows battery icon and the network one).

Haven't tested Today Agenda Yet on WM6.1 how's it doing?

Battery Icon can be removed but leaves an ugly void.
Systray as in the one from BatteryStatus?
Active Sync have only seen that gone with Wichbar but that's cheating.

Never had the idea to look into that.
I do want to try and change some of the icons in the future.
So besides Wishbar And someother skinning Apps i wouldný know how to change Top.

[Noonski]

Yes my storage is smaller by 12.5 mb.

These are the registry settings that I was referring to. I have not yet tried these with SPC6.09.

Yeah these are in here but not with the same values.

A bit smaller cache settings.

[Switchcorp]

Haven't tested Today Agenda Yet on WM6.1 how's it doing?

Battery Icon can be removed but leaves an ugly void.
Systray as in the one from BatteryStatus?
Active Sync have only seen that gone with Wichbar but that's cheating.

Never had the idea to look into that.
I do want to try and change some of the icons in the future.
So besides Wishbar And someother skinning Apps i wouldný know how to change Top.

TodayAgenda 1.2 is loading without problem ... but i can't really test it because i've no appointement until now (i'm doing an internship in a support department). I'll play with it tomorrow ;)

I've found a little app to remove the systray but i need some test because it seems there are problems with it.

I'm trying to avoid other softs because i don't want a significant drop of speed ;)

[Noonski]

TodayAgenda 1.2 is loading without problem ... but i can't really test it because i've no appointement until now (i'm doing an internship in a support department). I'll play with it tomorrow ;)

I've found a little app to remove the systray but i need some test because it seems there are problems with it.

I'm trying to avoid other softs because i don't want a significant drop of speed ;)

Well here's alittle somthing to play with, the first of a set of three.
It will install 10 cabs into QuickMenu >> Settings >> Extra >> CacheSettings >> Glyph. But also in to Default Startmenu to use with other Roms. (only 5.36KB)

Addd a few values that i have never used on ELF yet and that i don't advice using yet.
But this is for those that don't mind a freeze and Hard reset to test how far you can push it.
http://rapidshare.com/files/95193782/SPC_GlyphCacheSettings.cab
Sorry could not upload to XDA

Yes my storage is smaller by 12.5 mb.

These are the registry settings that I was referring to. I have not yet tried these with SPC6.09.

Well it's a fair price for knowing people.

As for the Cabs you attached the values these use are.

FatFS enabled to 4096 (Disabled in SPC)(BoostCab)
ReplStoreCacheSize 4096 (Same as SPC)(BoostCab)
ReplStoreCacheSize 32768 (4096 in SPC)(SpeedCab)
So as you see i haven't set them that high.

Setting Glyph very high will result in Memory slowly being stuck in that Cache.

BTW Long press of Start Menu brings up TaskManager.

Found out BTstatus isn't always enabled after flash.

That's one of the things i found in WM6.1 or the kitchen i'm using.
Some registry settings aren't Sticky somehow that's why i'm aplying most in the customizing part.

Oh yes and i forgot to say that i didn't use SDautorun for my theme ...
If i or somoeone else get this one working 100% for ELF i'll integrate it so people can Always use their own favourite theme from SDAutorun.
Life should be Beautifull. (And it will save me some more space in ROM ;))

My free program memory is around 22 mb.

FYI, on initial startup, the start menu unfolds rather slowly (there must be some background tasks that are completing). After a short delay, the delay in display of the start menu is completely gone.

Is there a way to retain the email settings as well after flashing?

My guess on the minimum comments is that there are a bunch of people watching to see someone else sticks their toe in the pool.

After a minor hickup (I do think it was getting the SD card in place in a timely manner), all seems well. The OS does really seem to perform quickly. For me the test is contacts (as I have over 3,000). Search is very quick.

Did you include any of the cache (glyph) tweaks in this ROM?

Maybe you've noticed that if you go very quickly to Send SMS and then go to choose who to send to it hasn't loaded all the contacts yet even with smaller amount of contacts.

That's because Simtoolkit is only loaded untill you need it or after you have started phone app this was again to preserve Memory and performance.

Especially in the start up process after reset. Small details. One might argue that it's anyoing but if you need all the memory you can get very usefull knowing that a reset without using phone is healthier.

Also WM reserves a specific amount of memory at start up that doesn't always get used and it then releases it after a while specificly for some start up apps you won't even find in registry or Start up folder.

It also starts up services on specific events.

M$ is using every chance it gets to try and check for a connection? For Instance opening Agenda will force Active Sync to start in the background, yug.

[quote=Noonski;1968244]Funny how the rate the Previous 6.09 Roms have been downloaded compared to 3.0X versions is a lot higher.quote]

I am waiting off till everything is good, as i like the old 6.0 as i have tried the 6.1 but i do not like the new txt!!! It is a pain in the butt, as i have over 3K txt, (I dont delete)

FunMan the Cabs in your Sig aren't available?
I wanted to merge them into one for you. (One minute work with my best friend and most valuable tool)

Last Extra

MS Solitaire SPCeed (SD install and links go both into ROM and QuickMEnu) (http://rapidshare.com/files/95211648/SPCeed_Solitaire.cab)

(Sorry for long response but this way everyone has all the anwsers ASAP)

[funman]

FunMan the Cabs in your Sig aren't available?
I wanted to merge them into one for you. (One minute work with my best friend and most valuable tool)

Last Extra

MS Solitaire SPCeed (SD install and links go both into ROM and QuickMEnu) (http://rapidshare.com/files/95211648/SPCeed_Solitaire.cab)

(Sorry for long response but this way everyone has all the anwsers ASAP)



Ya sorry i should have updated that along time ago!!! Some one deleted them and i could not be bothered to upload again!!! I have made a new one since!!! that i use!!! I make my own cabs with WinCeCab as well!!! I am getting good at making things run from the SD card!!! It is full, All my programs run off the SD card now! But having problems with some of my games not keeping my reg keys after a new rom flash!!!

[Noonski]

Ya sorry i should have updated that along time ago!!! Some one deleted them and i could not be bothered to upload again!!! I have made a new one since!!! that i use!!! I make my own cabs with WinCeCab as well!!! I am getting good at making things run from the SD card!!! It is full, All my programs run off the SD card now! But having problems with some of my games not keeping my reg keys after a new rom flash!!!

Totally missread your post at first man do i feel like a fool.

Hmmm maybe using UC to copy .hv files over...
Never tried it worth a shot.

And i have never done mortscript but that could make a backup.
Just thinking out loud, for al i know Windows won't accept overwriting

the Default.hv system.hv or user.hv from documents and settings.

Even if this would work it might interfere with some cooked registry settings.

I've seen some Windows CE hardware developers redirect .hv files to NandFlash memory.
But Storage Cards Always get initiated later then Inbuild nandflash which makes having an SD hives impossible if i'm correct.

Oke i admit life isn't as beautifull as it could be.
But at least i can confirm that custom tsk install will work with UC in ELF Yay.
But it is not taking over the background for the theme dammit aargh i hate tests that don't fully pass.
Fuck it i'm not going to do another run with extra Copy commands for the backdrop.
But if it works i will replace the backdrop in Windows with a Small size complete black one.(More space for required dll's for running some apps from SD.

Full confirm

LOCK:Enabled
CAB: \Storage Card\Cabs\TouchPal.CAB
CPY1:\Storage Card\Cabs\Bubbles.tsk
CPY2:\Windows\Bubbles.tsk
CPY1:\Storage Card\Cabs\PIM.VOL
CPY2:\PIM.VOL
EXEC:\Windows\cusTSK.exe \Windows\Bubbles.tsk
LOCK:Disabled
RST: Reset

It just doesn't work with some themes.
But that doesn't hurt me from replacing default backdrops with lighter versions.

[cstewart]

Comm Manager appears to be a "Lite" version. Travelers may need to show the flight attendants the "Flight" mode - this appears missing. Additionally, the standard Comm manager enables / disables wifi. I do not find this setting (perhaps I just do not know where the new location is). Related: it would be useful to find a way to store not only email settings but Bluetooth pairing settings for people that use handsfree devices.

Where is the battery setting to check the overclock rate?

I do not miss the cube. RIP.

PointUI appears to be working on this ROM.

Are you planning on cleaning out a bit more room for programs?

[Noonski]

Comm Manager appears to be a "Lite" version. Travelers may need to show the flight attendants the "Flight" mode - this appears missing. Additionally, the standard Comm manager enables / disables wifi. I do not find this setting (perhaps I just do not know where the new location is). Related: it would be useful to find a way to store not only email settings but Bluetooth pairing settings for people that use handsfree devices.

Where is the battery setting to check the overclock rate?

I do not miss the cube. RIP.

PointUI appears to be working on this ROM.

Are you planning on cleaning out a bit more room for programs?

Aaargh Dammit lost the post.

Have to leave for work now.

I'll get back to this.

And did you notice New Radio...

For BTStatus go Start >> Settings >> Personal >> Today Items >> Enable and select BatteryStatus >> Options >> Tray Launch Tab in the bottom >> Enable >> Confirm and back to Home >> Tap BTStatus icon in bottom right >> Show Rows >> Make Sure Main Row is selected.

I left in my Personal Hide Main Row Settings and for some reason BTstatus sometimes opens with the tray launch icons and sometimes it doesn't?!!??!! So good thing you brought it up.

At the moment i'm thinking about precooking it like this:
No Tray Icons (althought i like them there especially as i can ad some more).
Default Speed 247MHZ
CPU Scale Min 175/ Max 247/ Boost 260.
Show on Main screen only with Clock speed.

I also encountered a very strict Flight attendend and i should have used your trick showing him the flight mode, so i understand what you mean.

But if i remember correctly both Quicklist(orEndkey) and HTC CommManager could work with Skin files on SD.

Because it's not just the size of file influencing performance (how slight and insucnificant and unmeaserebale for the eye) It's also the Amount of files in Rom and Windows.

So at this point removing or adding more is very puzling as i would like to hit my perfect target.

Has anyone ever measured memory use Commmanager VS CommLite?
(Because i haven't)

[Noonski]

Giving myself a breather so it will Be out in two weeks.

Out:
T-Mobile Theme
In:
AllblackTheme
Out:
WM6.1 backdrop.
In: Allblack Backdrop
Out: DefaukltBaWinMob6.0 Out
In: AllBlack BAckdrop

In:
Today Agenda Working
In:
WM5Torage 1.75 Working
In:
Total Commander
So it looks like it will be default Fileexplorer next to Fexplore. Unles enough people prefer fexplore?
I'll also be looking if file explorer can work with Language files from SD...... Or maybe somoene else can test this.. Just for the fun of it.
Hint i used the word FUN ;)

Don't ask, there's plenty space left.
Out:
Old Os Size 52.428.800
In:
New OS size (For Now)
52,494,336 bytes
So a 64 KB increase not bad for the added Apps.
But there's enough room in there to get back to old OS size.

Theme was replaced because Personal Theme install works from SD.
Not all themes tho.

But looks like a fair trade of.
You get to install your own theme and there's more in the ROM.

Now i'll be testing CU SDautorun install of personal Splash screen.

Is there any interest for this?

Or do you like the greyscale 6.09 Splash?

So like i said Service Pack 1 in two weeks.

I have loads of parties to visit the coming weeks.

Update Service Pack 1:
Out:
Default log in dialer and Battery icon
In:
New T-Mobile log in dialer (it is smaller in size)
Out:
Screen alignment in first ROM autorun
In:
Screen alignment cab added to SPC preconfig to cabs folder to be replaced with your own.
In:
MyTheme.tsk
Added to cabs folder to be replaced with your own.
OUT:
Touchpal.cab install
IN:
New sdconfig.txt with the new commands to install Screen alignment cab and Theme
Out:
Blue dialer
IN:
Grey Dialer

Out:
Old Os Size 52,494,336
In:
New OS size (For Now)
52.428.800 bytes

Back on track Size is perfect again.

[Re-Mi]

:D

I didn't flash much lately simply because i could find the time to test everything etc.

But now i've downloaded your latest and will treat my touch with a suprise.

Because of my busy agenda i have to dive into the one time install things and the custom installs :D but i will figure it out.

Btw the network wiz donwload doesn't work

... okay i'm off to suprise my touch (6)

Greetz,

[cstewart]

Noonski,

- What new radio?
- Thanks for the BTSatus hint. I set it to your values to try.
- I think the regular comm manager would be better so as to display flight status.
- I added back the black.tsk file (the black is beautiful)
- the personal splash would be nice. Could be motivational, personal, interest or whatever. The grey doesn't do it for me ... but this is clearly a matter of personal taste.

Enjoy the time off!

At present no real issues with 6.09. Nice update and plays nice with TouchUI 1.02b T2.

[Re-Mi]

Hey Noonski,

Could you upload the networkwizard once more the download seems to be broken.

Btw i changedthe touchpal cab with the pro version and changed the name of the cab but it didn't install on install

And maybe its just me but the tapping seems to be a little buggy. it looks like it's a bit of th the right

I will install everything once more and i will see what will happen then.

Greetz,


btw while you're onto it :P could anybody point me to a pim backup cab i tought i saw it comming by a few days ago but now i can't seem to find it anymore

[AsusFreak]

@Re-Mi:
Tapping is a bit to the right indeed.
Settings-Screen-Align Screen and everything's perfect.
Noonski, maybe you might fix it?

[cstewart]

Hey Noonski,
Btw i changedthe touchpal cab with the pro version and changed the name of the cab but it didn't install on install

And maybe its just me but the tapping seems to be a little buggy. it looks like it's a bit of th the right

Re-Mi, I did re-align the screen. Installed TouchPal Pro to SD. Seems accurately positioned on my Touch.

[cstewart]

btw while you're onto it :P could anybody point me to a pim backup cab i tought i saw it comming by a few days ago but now i can't seem to find it anymore

Is this it?
http://forum.xda-developers.com/showthread.php?t=299705

[Re-Mi]

Is this it?
http://forum.xda-developers.com/showthread.php?t=299705


Yeah thanks cstewart, strange i didn't find it guess i'm a bit tired.

Greetz

[Noonski]

Hey Noonski,

Could you upload the networkwizard once more the download seems to be broken.

Btw i changedthe touchpal cab with the pro version and changed the name of the cab but it didn't install on install

And maybe its just me but the tapping seems to be a little buggy. it looks like it's a bit of th the right

I will install everything once more and i will see what will happen then.

Greetz,


btw while you're onto it :P could anybody point me to a pim backup cab i tought i saw it comming by a few days ago but now i can't seem to find it anymore

This was the one i was after.

The Cooked in Screen alingment.

Start >> Settings >> System Screen >> First tab >> Align Screen.

I knew this was to good to be true.

Welcome wizard will re apear in next version.

Untill people have a personalized .Cab with the correct screen alignment in them.

You can extract great clean registrysettings from HKLM\HARDWARE\DEVICEMAP\TOUCH
With Taskmanager+Registry editor in the seperate Cabs part.

You can then convert te .reg file to XML with a very small and very usefull tool for this job because it's all it does.

Then you use DOEDOE's new App to build your own Cabs folder.

Yes it builds the whole darn SDAUtorun for you and ,.. and...

There moving fast and getting it all sorted out.

The desktop tool is allready at version 0.6 in under a few weeks.

Really great work that they are doing up there in Development and hacking.

So i'm sorry i went over the head stripping the darned OS of Darned Taskmanager and Killing Welcome.

But i'm happy that it will be gone soon for sure.

Yes i'm really trying to make this a tweakers rom.

So it will be fixed. (Untill i'm confident UC is big enough)

Because all you need to do is...

Here it comes this is how you get rid of it.

Remove welcome.not from the root of your SD Before flashing.

It will bring back Welcome and screen alingment at start up.

So this means this option can be added to Doedoe's UC ROM SDConfig.txt Builder .

Done Uploading NetworkWizard. (http://rapidshare.com/files/95488777/SPCeed_HTC_Network_Wizard_1.1.cab)

[cstewart]

And did you notice New Radio...

Ahhh, you slyly slipped that in your signature. So 3.08.90. Am I to assume that this is just as worthless as the change from 02.95.90 to 03.07.90? I really did not see any value in the one and only radio ROM upgrade that I did before.

Anyone have any insights into Radio ROM 3.08.90??

[Noonski]

Ahhh, you slyly slipped that in your signature. So 3.08.90. Am I to assume that this is just as worthless as the change from 02.95.90 to 03.07.90? I really did not see any value in the one and only radio ROM upgrade that I did before.

Anyone have any insights into Radio ROM 3.08.90??


I'ts sentiment.

The last best and only radio i have ever used and kept using was when t-Mobile one for the Wizard.

There were to many isses with a few later ones.

So i'm hoping T-Mobile chooses their radios wel now to.

I'll check it in the elevator tomorow.

My GPRS is doing good on uploading a file to rapidshare.

But MSN is a bandwidth hugging monster.

You start noticing little thing over different builds.

XDA didn't allow for that much code for the links in my signature.

So i had to misuse a post for those.

But these are important files to someone in the future that might need them sweating because their phone wotn come on. so i need them in my Sig. And i need to look up that love rom for the wizard. But i still have that great T-Mobile base for the wizard that always worked to restore many many wizards.

Good thing i put it on the Wiki years ago when i said to myself i would stay away from cooking and contribute that way.

I should ask Bram which base he used which BTW has just gotten a lovely daughter. (http://forum.xda-developers.com/showthread.php?t=350784&page=16)

And i really don't mind internet over my phone for less then 10 euro a month.

Sleep well guys.

[zxcv]

when you say selectable in kitchen. Please explain how do we select the required software, and from which kitchen and where is this kitchen. Sir (Mr. Noonski) i will be highly thankful if you explain in detail.
thanks

[Noonski]

when you say selectable in kitchen. Please explain how do we select the required software, and from which kitchen and where is this kitchen. Sir (Mr. Noonski) i will be highly thankful if you explain in detail.
thanks


Hmmm is houldn't be helping you BRick your phone but you asked for it....
http://forum.xda-developers.com/showthread.php?t=368588

[Re-Mi]

Noonski,

Your rom is currently running on my touch, i reinstalled 1 time because the touchpal didn't got installed the second time it worked, i edited the install script to add pocketalarm for an auto install.

Okay so far so good it all installed great.

But the pocketalarm doesn't show up in the Quickmenu (i think it should be under accesories or something) (and this morning when it went off i had a struggle with it :@, that could be the settings of the alarm and me not being awake)

Now i'm currently at work testing out the SDconfig builder and i exported my network settings out of my registry transformed it to a xml file... but then ?? what should i do then?

(Btw if anybody knows where touchpal stores my registry key for the activation please tell me i couldn't find it i saw different touchpal in the registry but non of them contained my activation key)

[Noonski]

Noonski,

Your rom is currently running on my touch, i reinstalled 1 time because the touchpal didn't got installed the second time it worked, i edited the install script to add pocketalarm for an auto install.

Okay so far so good it all installed great.

But the pocketalarm doesn't show up in the Quickmenu (i think it should be under accesories or something) (and this morning when it went off i had a struggle with it :@, that could be the settings of the alarm and me not being awake)

Now i'm currently at work testing out the SDconfig builder and i exported my network settings out of my registry transformed it to a xml file... but then ?? what should i do then?

(Btw if anybody knows where touchpal stores my registry key for the activation please tell me i couldn't find it i saw different touchpal in the registry but non of them contained my activation key)

Haven't tried it yet but there should be a function doedoe'd app to transform xml files into cab's.

Checked it should be on the there in V 6 on the second tab don't have xml to test it at work.
And i see it even has reg to xml now great.

Can you upload your pocketalarm so i can make it install extra shortcut into SD for Quickmenu.
And see if it can be made into hardcoded SD app if you like.

Touchpall does not store registration in Registry.

It makes an extra file in it's program folder containing that information.

tpconfig.bin

SO you can try the COPY1 Command into rom for that.

Haven't been able to get Touchpall to work from SD after flash yet.

[Noonski]

Working Samples of E-Mail config for UC

http://forum.xda-developers.com/showpost.php?p=1974188&postcount=197

Looked up some isses and settings in other ELF rom threads.

Anyone having issues with WIFI or BT?

Up untill now i only just tested Connecting to Wifi which worked and i tested BT pairing. Getting back my Wizard from a lend out so i will check BT sending then..

But if the numbers are right there's propably nothing going on.

[cstewart]

Bluetooth pairing works normally for me. Was there a change from RC3 to SP0?

[Noonski]

Bluetooth pairing works normally for me. Was there a change from RC3 to SP0?

No no changes just some issues i haven't really fully tested on that i saw i some other pre 5.2.19.199 WM6.1 roms.

Can any ELFIN user post their Program memory sizes?

I'm trying to figure something out about PP.

Because th OS isn't meant to be ELF/IN or it is but a different value needs to be used to change PP.

at the part where PP is set the old ELF value and many 64MN ram devices changing the value from 40 to 80

would correspond with 4MB or 8MB pagepool.

The new Value is 20 in these mixed ELF/IN rom.
Which in ELF corresponds with 8MB PP But how large is the pagepool in ELFIN?

It has more memory it's double but it also has a larger PPool.

Is it worth it chaing the value to 10 to see what it would do to my elf?

I know setting it to 40 doesn't brick the device it just freezes and crashes and then can be reflashed.

Just thinking out loud in reality things always turn out to be much harder. But i'm just thinking that the new value is there for ELFIN roms

Disable threadded SMS

http://forum.xda-developers.com/showpost.php?p=1956465&postcount=1

[matthias.weiss]

Hallo Noonski,
I enjoyed already your SPC3 ROM and keen on getting my hands on your most recent update. Here, I tried to download HTC Network Wizard 1.1, but it seems to be removed from the server. I found a Kaiser derivative but am not clear if this can be used as is.

Can you upload the file again?

Thanks, Matthias

[Noonski]

Hallo Noonski,
I enjoyed already your SPC3 ROM and keen on getting my hands on your most recent update. Here, I tried to download HTC Network Wizard 1.1, but it seems to be removed from the server. I found a Kaiser derivative but am not clear if this can be used as is.

Can you upload the file again?

Thanks, Matthias

Huh??... I just reuploaded it yesterday

Updated the links again with the uploaded version of yesterday.

http://rapidshare.com/files/95488777/SPCeed_HTC_Network_Wizard_1.1.cab

This is not an excuse but i get a lot of lost posts and errors saving messages on XDA using GPRS So sorry bout that.

I'm teaching myself to CTRL+A CTRL+COPY before submitting post now ;)

Anyway doing some more reading up..
http://www.avertlabs.com/research/blog/index.php/2008/02/26/windows-mobile-trojan-sends-unauthorized-information-and-leaves-device-vulnerable/

[Re-Mi]

Huh??... I just reuploaded it yesterday
[/URL]

That's correct but you didn't updated the first post :P

Greetz

[Fallen Angel]

What is "Touched Total Commander"?

[Re-Mi]

What is "Touched Total Commander"?

It is total commander with a black skin, i think it's very nice

It's a file explorer with more usability then the normal WM one

[Fallen Angel]

Yeap, Total Commander is kewl.
But i have it black since the device theme is black (touch standard).
Can someone post a screenshot?

[Noonski]

Yeap, Total Commander is kewl.
But i have it black since the device theme is black (touch standard).
Can someone post a screenshot?

Euh i patched the icon to greyscale is that what you mean?

Nothing Mayor but i might do the rest of the icons somewhere in the far future.

And i made the Cab install differntely. But anyway Total C will be in ROM next version. (Maybe Temp, i don't know yet)


EDIT FIRST POST:

5. The TriColour Boot screen will display.
Verify that you have SPL 1.111.001

Thanks to Sharp Ol Koala996

[Fallen Angel]

So, the only differece from original TC is program icon?
Yeah, your icon is cool. Always hated that blue floppy disk :) even for BB.

[Noonski]

So, the only differece from original TC is program icon?
Yeah, your icon is cool. Always hated that blue floppy disk :) even for BB.

And i put some settings in like Two folder view and default starting folders and single tap to open & large view to mimic default explorer.

Just some personal settings.

I like TC to open in a specific folder of the bat right after flash BTW i think i also changed the default starting folders for default Explrer ;)

Keep your eye on this post.

http://forum.xda-developers.com/showpost.php?p=1972630&postcount=152

BEcause then you know what you can start adding to your SD cabs folder.

I'll upload the new Pre config so advanteages of SD autorun can allready be used.

[funman]

Ok am trying this new rom again and everything is ok i guess but i would like to have Total comm to be opened then i click the explorer in quickmenu i dont like the old file explorer

I have it on my SD already just need to know the reg key to change it over!

[Maldoro]

Thank You Thank You Thank You
:p:p:p
2years looking for this rom

[Noonski]

Ok am trying this new rom again and everything is ok i guess but i would like to have Total comm to be opened then i click the explorer in quickmenu i dont like the old file explorer

I have it on my SD already just need to know the reg key to change it over!

Well FunhMan two hits is a Confirm.

But the key your looking for would be HKLM\Software\Mi$\Shel\Rai\:MSFEXPLORE.

Change Fexplore.exe to totalcmd.exe

Or just a moment need to test this.

Changing rai doesn't always like being pointing to SD

Unless you quote it.
"\Storage Card\SPC\Windows\etx.exe"

But don't worry Total will be in memory and looks like it's going to be Default.

Anyone else agree? Totalcmd as default fileexplorer.

[funman]

and one more thing the TouchPal cab did not work for me!

[cstewart]

Definately Total Commander over File Explorer

[Noonski]

I encountered a little problem trying to remove SQL CE from the rom as i deem the touch to be not enough powerhouse for the kind of profesional use to need SQL in the ROM.

This way there is more then enough room for HTC commManager.
I was planning to put Flash Lite 3 in but then i remembered the that is a perect SD aplication.
So There's some space left for voice dial and even more.

What Would be a good app to definitly have in Rom?

To busy for an update but i'll try to make a few new SPCeed Cabs tonight maybe...

As for Touchpal i'll look into it.
It also didn't always install with me but it did most the time.

Also the Marshall Touch waiting icon will be back but that will also eventually move to SDautorun so it can be replaced with whichever Waiting icon people would prefer from Marshall.

I replaced the log in dialer with a new t-mobile dialer it's almost identical but a little different, but is shaves of another 300kb in rom (Which is a frickin lot if you consider some apps are only 50KB)
It also has a new battery icon but it doesn't look so nice so i'm still using the original one.

[Noonski]

Thank You Thank You Thank You
:p:p:p
2years looking for this rom

Thank you.

Because with only one post, I do really believe you know what i'm trying to do.

Thank you, really.

Oh and bad news....
System Cache is now enabled to 4096.
So if some of you thought it was fast before.
It just got faster.

But i'm really strugling to fill it at the moment i even have to temporarily put the Cube back to make 50MB and it's still not there. Grrrrr dammit

Flash Lite Player 3.0 SPCeed now integrated to rom and cab posted.
So why wait for my next update if you can start using it now ;)

[Re-Mi]

Maybe you could think of the advanced configuration tool to add.

I know the things it does you can do by hand, but i must confess i use it just to play the lazy dutchman for example to remove the sms send notification.

Btw thx for the 2 toys, i'm playing with on the the 2 most of the time the other one i really haven't found the time for yet.

Greetz

[Noonski]

Maybe you could think of the advanced configuration tool to add.

I know the things it does you can do by hand, but i must confess i use it just to play the lazy dutchman for example to remove the sms send notification.

Btw thx for the 2 toys, i'm playing with on the the 2 most of the time the other one i really haven't found the time for yet.

Greetz

Advanced Config will be back as SD app.
Old one was missing a file.

As for SMS theading disable it's been added I'm also lazy if you can post the registry for disable i can make it an option in Quickmenu to though cab.
(only 1 k or so an this way you have it whatever rom you flash to on your SD)

No at the moment Excell is back, SAP service (disabled but with an extr enable cab in SPC preconfig, STK service (Testing),Symbol Pad and transcriber.

Being lazy is what it's all about.

In the mean time choose your own Marshall waiting cursor.
http://www.marshallskins.ilbello.com/php5/htdocs/downloads.php

And i'll add the line in next SDconfig.txt next Preconfig Update.

Rename cab to MyWaitingCursor.cab

But i'll but the touch version in by default.

Did you mean this one?
[HKEY_CURRENT_USER\Software\Microsoft\Inbox\Setting s]
"SMSDeliveryNotify"=dword:00000001

And ooh almost forgot Hbutton. Let's add some longpress functionality. 0.2MB to go.

[funman]

Man this is the boom!!! I have gone bad to my rom for now!!! but i like how this is going!!! You have given me so many ideas!!! to edit your 3.0 rom!!! Like i did not know that you could just get rid of the type ways just by getting rid of the reg key!!!

Your like a god that has come to help us humans!

[Noonski]

Man this is the boom!!! I have gone bad to my rom for now!!! but i like how this is going!!! You have given me so many ideas!!! to edit your 3.0 rom!!! Like i did not know that you could just get rid of the type ways just by getting rid of the reg key!!!

Your like a god that has come to help us humans!
Aah come on FunMan.

I know you know a lot. And propaply even have more Reg tricks then me.

Didn't i see you over at the old NBD thread?

And also Hbutton is not going to be in (not familiar with it and only Camera button)
Also removing SQL Ce is a no go.

[funman]

Aah come on FunMan.

I know you know a lot. And propaply even have more Reg tricks then me.

Didn't i see you over at the old NBD thread?

And also Hbutton is not going to be in (not familiar with it and only Camera button)
Also removing SQL Ce is a no go.

Ya i get around!!! But old dog still learn!!!

Ya done one or two rom my self! but they were not really made to give out!!! I dont work well with making something that i would not use!! And i use alot of things most people would not and alot that people do!!!

[Noonski]

Something to keep people playing.

GoogleMaps 2.0 SPCeed (http://rapidshare.com/files/97339718/GoogleMaps.CAB) (yes weird text in the launcher but it works)

[cstewart]

I see from your signature that you are working on a SP1. Are you going to share the juicy details of the newest, most boring ROM around?

[charli]

Yeaah, share some details of your extremely boring rom. I'm getting bored with the ones available. And I'm sure the SP1 will have a lot of new things.

[Noonski]

Most of the changes are in post 152.

But i'm back working on a new kitchen to.
So it's easier to make different langauge version.

[Re-Mi]

But i'm back working on a new kitchen to.
So it's easier to make different langauge version.


Man i can see it all in fornt of me, an automatic system that will as the following question when you start to cook.

Hello Cooker, What language would you like your rom to be?

And it will automaticly select the language files that are necesery.


/ me is dreaming off again :d

But Noonski as you always bring us suprises i thing the upper description will be realistic soon

Greetz

[pkoper]

Man i can see it all in fornt of me, an automatic system that will as the following question when you start to cook.

Hello Cooker, What language would you like your rom to be?

And it will automaticly select the language files that are necesery.


/ me is dreaming off again :d

But Noonski as you always bring us suprises i thing the upper description will be realistic soon

Greetz

You will be surprised!
:D:D:D

[cstewart]

Noonski, do you know of anyway to cause Activesync to sync notes from storagecard/documents also or instead of from the device /documents subdirectory?

[Noonski]

Basicly it will have every Sys Package with a _0409 behind it.

As for OEM all parts that need translating will be collected into one place.

It won't have a simple setup but the lay out will make it easier to add translated versions.

And also the Registry keys that need translating will be easier to find.

I will be adding the dutch versions once i'm done.

So basicly you don't have one selection to change but you change all 0409 slected apps into 0413.

It will just make life a little bit easier.

And with Koper eager to get a full german rom out it will at least have three languages to choose from.

And also now everything that gets removed from Rom will get a neat package.

I'm allready at almost 100 selectable options.
(nope i'm beyond 100, just for the HTC Home plug in there are 69 options. All HTCHOmeCustomize graphics are now part of the kitchen)


As for syncing from Storage Card\My documents.

In the rom the default My Documents is set to ROM.

I have allready moved those registry settings so they are easy to find.

Because i was thinking about the same thing. So i will test it. (yes i should be ashamed i haven't yet)
Because who really need two My Documents?

I'm almost doing a 24 hour round the clock run this weekend.
So at the least i think the basic lay out will be there to start getting translated versions into it.
Basicly i was to enthousiastic to cook my own rom that i didn't think through how i had my kitchen set up. And i'm to hard on myself.
When i screw up i start from scratch. It's the best way to do it better.

[Noonski]

Noonski, do you know of anyway to cause Activesync to sync notes from storagecard/documents also or instead of from the device /documents subdirectory?

I'm going of to bed.

But the test would be.
Change

[HKEY_LOCAL_MACHINE\System\Explorer\Shell Folders]
"My Documents"="\My (file://\\My) Documents"

Into

[HKEY_LOCAL_MACHINE\System\Explorer\Shell Folders]
"My Documents"="\Storage Card\My (file://\\Storage Card\\My) Documents"

In the registry then reboot and try syncing.

[Switchcorp]

So basicly you don't have one selection to change but you change all 0409 slected apps into 0413.


If the only thing to do is that it wouldn't be difficult to create a little gui (or a batch) to change all those numbers :) Waouw it becomes again and again very impressive ! Well done Noonski ! ( i think we can create a "Noonski Work addicted" tag)

[Noonski]

Hehe..

MeddaFeck.

Finally. Got new Arc Soft MMS working correctly.
SMS and MMS are seperated again in

Inbox >> New (doesn't have the SMS MMS selection)

This also fixes the issue with QUicklist button not being able to start a new MMS.

Next up Test new Java.
(which apps are imprtant? i;m testing Opera Mini)

Also remind me to change install insrtuction.

Flash >> Insert SD card after flash >> Remove phone from USB.
And don't start your Contacts to soon because it can break the copying of pim.vol from SD.

And yes'..
Attached is a "MyMailAccount.XML"

Which can be configure with your email account settings and then added to SD UC \Storage Card\Cabs\

Folder.

As long as the name is kept "EMAIL" this will fix the last issue with Quicklist/newbutton.

So now by default new SMS MMS and EMAIL will work.

And yes off course you will have your e-mail setup from scratch.
Scratch on of the list.

Oh and i almost forgot.. Adobe Reader 2.0 LE SPCeed (http://rapidshare.com/files/98320863/SPCeedAdobeReader.cab)

Fixed .. Latest Esmertec Java just don't install .jad files only .jar files.

Uploading Full Kitchen with ready to flash rom. (140MB Now and no this is not a cross post as it does contain ROM)

It's not as slim and memory friendly yet but a good Aplhe preview to play with and see what can be trnaslated.
Here it is


SuperProCoreSplit.7z.002 (http://rapidshare.com/files/98516419/SuperProCoreSplit.7z.002)

SuperProCoreSplit.7z.001 (http://rapidshare.com/files/98519442/SuperProCoreSplit.7z.001)


And.. Good morning again Thios one's for Cstewart
Noonski, do you know of anyway to cause Activesync to sync notes from storagecard/documents also or instead of from the device /documents subdirectory?


Or

\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
"FileSyncPath"="\My Documents


Other nice stuff

http://forum.xda-developers.com/showthread.php?p=2013622

And Good News Stuff.
http://forum.xda-developers.com/showpost.php?p=1963604&postcount=3

Which means i finally gots the new Dialer that Some Would like to keep to themselves ;)

[cstewart]

How is SP1B1 looking?

[Cobra2]

How is SP1B1 looking?

Hope Noonski workin on the ram size :) Big Big Big Big program Mb size :p:p

[Noonski]

It's going slowly.

As i'm re doing the whole Rom but this time neatly so the kitchen is more useable for others to cook with in different languages.
(Also making some Language specific packages and hope to have a Dutch Rom in a month)

And i allready fixed some important and minor issues (haven't heard that many)
But i think most importantly is Esmertec Java 2.119 and Arcsoft MMS 4.28
Working.

I got more time so i'm going to try and make it as perfect as it can be.
Because in the last rom i had to apply some registry fixes through autorun ecause they would not stick after flash or they would sometimes all of a sudden dissapear after a reset.

This might be because of the new Kitchen, but it might be because of changes in WM6.1.

So whenever i encounter these weird not sticking registry settings i'm putting them in a ca fix, but it's not the correct way.

ut the good thing is with a Fix.cab that runs in SDautorun all that needs to e done for user is rerun the cab.

And i think i'm not the only only one running into this.

I hope this all makes sense to some.

At the moment the Rom is not fully stripped to previous size yet. I'm around 57.41 MB total now.

But i think the specs will be the same again.

but very very UC.

I don't think i'll get Program memory more then 22/23M.
Unless someone can guide me into changing the Pagepool which i haven't een able to do.
I tested disabling more services but this had unwanted effects on some applications (Quickmenu dying and Homescreen redraw failing).

The result is that i have more time to test some things.

Other good news is that my Internet will back in a few hours.

So when i get the Kaiser G3 Dialer cooked correctly (instead of applying a ca fix through SD autorun ;)) i will post where i'm at.

And at the moment i'm still surprised everytime my phone tells me i got new mails. because i didn't set it up because i flashed so many times. And i keep forgetting that US now takes care of that yay. Yes i'm Still a fanboy in a way.


BUUT cobra why don't you download the new 200 MB
kitchen which includes the Rom to?


6hours later.....

Finished looking into the issue where the new G3 Kaiser dialer didn't portray correctly.
I compared the reg that fixed it to the rgu that was cooked.

They were identical... Hmmm.

So it wasn't something i fucked up.

It's just another registry setting that doesn't like staying sticky...

Now testing SDautorun fix cab for this issue. (working)

After that remove HTC taskmanager.

HTC Taskmanager removed, Simmanager replaced, Total Command set to default explorer, Catalog removed, Broken voicerecorder removed, Slimmer taskmanager added, made a nice new WMP skin for myself, HTCservices removed cleanly, at 54MB.
SDautorun with added fixes cab installs very slowly but this way PIM.VOL gets copied over correctly to so a minus and a plus.
But FIX from Autorun is needed WM6.1 is stubborn.
(Note to self , set Loading Icon to overwrite)
Set Cab to not delete after install again.

And here's the HTC commManager 8 Button
http://forum.xda-developers.com/attachment.php?attachmentid=76049&d=1205670781
Normal installer but reduced graphics.
Should have done this earlier.

[Noonski]

Shit sorry have to take a break.

I just got a new toy to play with and sorta cook officially.

[pkoper]

Shit sorry have to take a break.

I just got a new toy to play with and sorta cook officially.

a new toy?

[Noonski]

Hey where is the picture i uploaded...

I work for a Company that makes Windows CE GPS devices and software.

And we just got three Samples of Windows Mobile Phones with GPS.

And i need to funk up the interface a bit and some other fun stuff.

Not a HTC device.

And one of them has VGA display. Damn it looks crisp, but damn most of the software i use looks crap and small.

I can't officially put HTC commanager on it, but for testing purposes who cares.

BTW i'm not a developer.

[pkoper]

shit.... what did i do wrong?

they gave me a waterproof nokia with a compass at work

[Noonski]

Don't worry i have to give them back....

But first i wanna see a few HTC apps on them.

What can i replace without cooking the damn thing......

Oe overclock it. I'm like a kid in a candy store.

Who knows koper maybe T-Mobile come knocking on your door ;)

Put a little skin on Battery status for a change. It doesn't support the processor running at 400mhz. not 52mhz, maybe that's in the other vga device. Regular Commmanager 8 button youch still looks nice and Touchpal getting to be a must.


CSstewart... You a good businies man, you think those guys over at POINTui are interested in selling some licenses? Just for the fun of it.

Thy could J$rk off, just by the idea of being the default user interface in a phone.

I just got an assignement just up my alley. Sorry guys but for me this is a big thing. But i'll keep on cooking maybe even more.

Custom very light taskmanager item mapped to long press of shut down button. Propably based on the real CE taskmanager.
Shutdown option on first tab.
With the ussual running programs.

Second tab: Memory status
Memory Total 48.66 In use 20.0MB 28.43 free.

Program mem ory 68.95 in use 16.73 52.12 free yeah i'm using it.

Processes list on Third tab.

Nice little extra i would like seeing under the Shut down key.

HTC Replace the dammit ShutDown.EXE.

There's possibilities there.


Different simmanager., Backs up to SMS to SiM or the other way around. Or delete all of them at once.

Again very lightweight app, but very usefull. It's that same Java T-Mobile started using in new builds.

Forgot the name and about info doesn't show it on this one.

New Gnarls Barkley is also good BTW ;) Listening to it on my Virtual XP closed of from the outside world.

[pkoper]

here's what i've been up to.....

got the german TMOB 2.26.111.53 rom and dumped it....
flashed it to my elf and prog mem was 10mb....
grabbed the XIP from my GTouch, cooked... and voila 27MB
then i thougt, what if we take the xip from bepe's kitchen?
Well it worked too, and we are happy with 27MB on first boot, can't remember but i think the pagepool changed... anyhow memory drops to around 18mb after usage....

Got me thinking a bit.... with the xip change the protocol changed.... language stayed the same...

just not sure about this whole 6.1 thing.....

[Noonski]

I did that with a certain dutch rom a while back. I called it a dirty port.

It worked fine in dutch i told you remember.

But the XIP has a different lay out and drivers.

This is one of the big changes in th BOOR.RGU of XIP.

[HKEY_LOCAL_MACHINE\SYSTEM\Loader\DeviceStacks]
"LoadHigh"=dword:1
[HKEY_LOCAL_MACHINE\init]
"Launch19"="initvmmap.exe"

And then it's folowed by all the drivers.


And then further on..
Damn what was it agian.

That setting that takes over control over all the old drivers for memory, discs and SD cards...

Or was that in The OEM drivers RGU file.....

[cstewart]

CSstewart... You a good businies man, you think those guys over at POINTui are interested in selling some licenses? Just for the fun of it.

Thy could J$rk off, just by the idea of being the default user interface in a phone.

I just got an assignement just up my alley. Sorry guys but for me this is a big thing. But i'll keep on cooking maybe even more.

I can ask, you just never know!

[pkoper]

why does the memory drop so low?
i get 27 on first flash and after you use cube one it drops by like 10megs?

[pkoper]

i have been playing again...
this time with the radio roms.... its possible to get over 30MB free prog mem

[Cobra2]

i have been playing again...
this time with the radio roms.... its possible to get over 30MB free prog mem

Can u give more info thanx :) Did u get anotehr rom over the 30MB ?? Wich rom?? I'll love to get mine p3450 over the 30Mb :p And is it still as fast as Noonski's rom ??


Thanx

[Noonski]

Can u give more info thanx :) Did u get anotehr rom over the 30MB ?? Wich rom?? I'll love to get mine p3450 over the 30Mb :p And is it still as fast as Noonski's rom ??


Thanx

Disable Home alltogether.... ;)

But Difference in Radio's keep us informed.

Drop the Cube .... HTChome already does the same...?

It was a cool gadget.

[pkoper]

I am playing with TMOB 2.26.111.53 ROM at the moment using different XIP's.

Depending on XIP I would get ~20 to ~27 MB free programm memory. When using the cube the first time memory would drop by 10megs on my ELF. Inserting the SIM card caused another huge drop.

A friend has an ELFIN and will flash anything you throw at him....
With the same ROM he did not have the same memory drops. He has radio rom 3.08.90 and I had 3.07.90. When I flashed the 08 rom I gained a few MB's prog memory.

Then we still had the cube memory loss. I replaced the 3 TMOB .exe's with an older version I had.

The tmob cube uses brn's instead of png's...

So at the moment I have

CE OS 5.2.1933 build 18125.0.4.2
2.26.111.53
4.1.13.52 protocoll version
with 51.92 MB ram that runs on both ELF and ELFIN

[gefountoul]

Hey Noonski, great to see u making us happy with your cooks..but I have a problem. Trying to download from the previous page but the link seem to be dead. Am I doing something wrong or I am just a nb? :) cheers

[Noonski]

I only want to point out that somewhere i posted.

"I don't know what it is about New T-Mobile Roms but they always have special radio's"

I'm Confuus.. So this is not WM6.1?

Hey Noonski, great to see u making us happy with your cooks..but I have a problem. Trying to download from the previous page but the link seem to be dead. Am I doing something wrong or I am just a nb? :) cheers

What is missing?
I'll upload.

[pkoper]

the tmob I have is not "officially" 6.1.... but its just too similar to me. The rom versions are nearly identical. And have a look at the cube.. its fast as, all png's gone, now brn's

http://rapidshare.com/files/101047137/ELFIN_T-MOBILE_GER_ROM2.26.111.53_OS_ONLY.rar

[gefountoul]

I only want to point out that somewhere i posted.

"I don't know what it is about New T-Mobile Roms but they always have special radio's"

I'm Confuus.. So this is not WM6.1?



What is missing?
I'll upload.


...Uploading Full Kitchen with ready to flash rom. (140MB Now and no this is not a cross post as it does contain ROM)

It's not as slim and memory friendly yet but a good Aplhe preview to play with and see what can be trnaslated.
Here it is


SuperProCoreSplit.7z.002

SuperProCoreSplit.7z.001...

These are the correct links to download or I miss something? which are the properly link to download the rom? I know I am getting u bored.. ;)

[Noonski]

...Uploading Full Kitchen with ready to flash rom. (140MB Now and no this is not a cross post as it does contain ROM)

It's not as slim and memory friendly yet but a good Aplhe preview to play with and see what can be trnaslated.
Here it is


SuperProCoreSplit.7z.002

SuperProCoreSplit.7z.001...

These are the correct links to download or I miss something? which are the properly link to download the rom? I know I am getting u bored.. ;)


Or this one

http://www.megaupload.com/?d=HKW64TDD

[gefountoul]

Or this one

http://www.megaupload.com/?d=HKW64TDD

Still nothing..From the rapid it says "file delete by uploader". From mega the same..Anyway..don't want to trouble u more..thanx for the effort..


but says limit exceed as I am not a premium..thanx Nooski.. :)

[Noonski]

Looks like i'll have a little easter present.
SP1 has taken me more then a 100 flashes but it's coming along.

[charli]

Oooh, I'm really glad to hear that.
I'll be the first in flashing your rom when you release it.

:) Thanks Noonski

[Noonski]

And no, Sorry no new OS build 19202 toys like arcsoft 5, Java 20070222, new simmanager, Windows Live, and HTC quickGPS will not be in SP1.

(Damn why did they have to release a new core)

I will do some extensive testing first before porting (Porting will be testing anyway)

It was released yesterday... :mad:

Or what do you say? Is the current version good enough to wait a little so i can put new stuff into SP1?

[Re-Mi]

And no, Sorry no new OS build 19202 toys like arcsoft 5, Java 20070222, new simmanager, Windows Live, and HTC quickGPS will not be in SP1.

(Damn why did they have to release a new core)

I will do some extensive testing first before porting (Porting will be testing anyway)

It was released yesterday... :mad:

Or what do you say? Is the current version good enough to wait a little so i can put new stuff into SP1?

just release it :P, that will give you some time and us something to play with. BTW the "D" port thingy ...:rolleyes: is giving me a batterydrain since about a week now ... i hope this one will repair that .

Greetz,

[pkoper]

where did they release it?

[Noonski]

Kaiser also germ and a dutch version for WM6.1

http://forum.xda-developers.com/showthread.php?t=379554
German WM6.1 for Kaiser, Yay
So some new MUI files.

You need Winzip to get the nbh file out.

And you need the kaiserkitchen to extract OEM and SYS folders.
Kaiserkitchen is in Kaiser Wiki with tute.

Jus replaced Simmanager and WLM.

Java and Arcsoft will take longer.

[Noonski]

just release it :P, that will give you some time and us something to play with. BTW the "D" port thingy ...:rolleyes: is giving me a batterydrain since about a week now ... i hope this one will repair that .

Greetz,

You been using the D Port Thingy?

Wow. If it's only a battery drain it's doing better then i expected.

BTW new Build for SPC is going to be a bit bigger then previous.

And good Idea i have Broadband now, so i can upload my Nightly build.

Batterry status has now taken over the job of taskmanager also in the upper right home area and also it has a pbar like triangle on all windows but it is easier to open.

Tapping on the midle part of BTSstatus brings up HTCCommanager running 50-50m from SD and Rom.
Tap and holding same area will kill Commmanager.
Today Agenda is back but disabled by default.
Also just finished a cab in SPC preconfig for those that want to restore default Start Menu ITEMS.

60% up

http://rapidshare.com/files/101945458/NightlyBuild.zip

100% Up

Just preconfig and RUU file.

[pkoper]

Kaiser also germ and a dutch version for WM6.1

http://forum.xda-developers.com/showthread.php?t=379554
German WM6.1 for Kaiser, Yay
So some new MUI files.

You need Winzip to get the nbh file out.

And you need the kaiserkitchen to extract OEM and SYS folders.
Kaiserkitchen is in Kaiser Wiki with tute.

Jus replaced Simmanager and WLM.

Java and Arcsoft will take longer.


winzip.... i thought my winrar crapped out thanks

[Re-Mi]

You been using the D Port Thingy?

Wow. If it's only a battery drain it's doing better then i expected.

BTW new Build for SPC is going to be a bit bigger then previous.

And good Idea i have Broadband now, so i can upload my Nightly build.

Batterry status has now taken over the job of taskmanager also in the upper right home area and also it has a pbar like triangle on all windows but it is easier to open.

Tapping on the midle part of BTSstatus brings up HTCCommanager running 50-50m from SD and Rom.
Tap and holding same area will kill Commmanager.
Today Agenda is back but disabled by default.
Also just finished a cab in SPC preconfig for those that want to restore default Start Menu ITEMS.

60% up

http://rapidshare.com/files/101945458/NightlyBuild.zip

100% Up

Just preconfig and RUU file.

Noonski pull till version off. just check your contact settings before upload again

bgtw i love the BSOD :D

Greetz,

[Noonski]

Noonski pull till version off. just check your contact settings before upload again

bgtw i love the BSOD :D

Greetz,

You mean That Somehow Magicly RandomAcces dissapears from the right softkey? An referts to regular Windows Contacts?

That's why i added the Softkeyapplet in control panel. (still needs to be moved topersonal tab)

Or when you use BTstatus with CPU scale and do a softreset BTstatus dissapears from Homescreen plugins as being enabled.
Because BtStatus always rights the last Clockspeed to registry.......
GRrrrrr...

And stop frightening people with the aleged BSOD.

[Re-Mi]

You mean That Somehow Magicly RandomAcces dissapears from the right softkey? An referts to regular Windows Contacts?

That's why i added the Softkeyapplet in control panel. (still needs to be moved topersonal tab)

Or when you use BTstatus with CPU scale and do a softreset BTstatus dissapears from Homescreen plugins as being enabled.
Because BtStatus always rights the last Clockspeed to registry.......
GRrrrrr...

And stop frightening people with the aleged BSOD.

No i ment Who's Bram, Danny, Hortense, ibrahim, Maria, Nuno etc etc etc ;)

And could you please tell me where to find the align settings and how i can add them for next time :P

[Noonski]

No i ment Who's Bram, Danny, Hortense, ibrahim, Maria, Nuno etc etc etc ;)

And could you please tell me where to find the align settings and how i can add them for next time :P

Yep it's removed thanks.

Making a new Blank Pim.vol
Which propably also means you didn't have yours backed up to Cabs folder.

The align settings are.

euh lemme look.

Take a registry editor and the key was.

HKLM\Hardware\DEVICEMAP\Touch.
Export to a .reg key and post it as .txt i will make a .cab for SDAutorun.

Or i think that there where some tools at Sleuths UC thread to convert the .reg file to a .xml file that can also be used in SDAutorun.

Then add a line to SDConfig.txt

Either
CAB: \Storage Card\Cabs\MyScreenAlignment.CAB
Or
XML: \Storage Card\Cabs\MyMyScreenAlignment.XML

Depending on if you make an XMl file or a cab.

Uploading another version with new Jbed Java 3.1, SimManager & WLM.
But
Arcsoft M MS 5, Windows WorldCard & HTCQuickGPS will be put on hold, New StreamingMedia for SP2

I'm curious as to which Custom Splashcreens your using.

[Noonski]

1. First run the Screen alignment application on the rom you are currently running. And be as precise as possible.

2. Then install A regeditor :
http://rapidshare.com/files/93712707/SPCeed_TaskManager___Regedit_1.0.cab
And look up the regitrsy key at:
HKLM\Hardware\DEVICEMAP\Touch
Tap and hold on that folder and choose export to SD card.

3. Download the .rex to XML tool below:
http://forum.xda-developers.com/showpost.php?p=1902590&postcount=35

4. Copy your exported .reg key to you computer.

5. Use the tool from step 3 to convert the reg to xml. (actually it makes a .provxml file,but you simply rename the extension to .xml)

6. Give the new XML an easy name and copy it back to your SD card in the folder Cabs.

7. Open SDconfig.txt from your Storage Card and a line:
XML: \Storage Card\Cabs\TheNameYouGiveIt.XML
I always put XML lines as last.

Done.

Next time SDautorun runs it will use the correct screenalignment settings.
BTW you can also edit the MyMailAccount.XML in notepad with your E-Mail account settings off course.





http://rapidshare.com/files/102094831/SPC_6.09.SP1.75.zip

Yeah it's the Almost finished version with some new stuff and new Screenaligment.xml file.

And some other stuff to play with..
Skype SPCeed (http://rapidshare.com/files/102090776/SPCSkypeForPocketPC.CAB)

[Re-Mi]

The last download you provided just gave me a verry expensive alarmclock becasue there was no network despite the things i've tried to do.

Just reflashing as we speak, and did you remove several things out of your nightly build ?? i could check myself but it's way to early in the morning :P

Greetz,

after reflashing it's fixed now, my 10 euro cents finaly felt about using the UC aplication, and i got some things to do now, he he copying things to the cabs folder, editting the txt file etc etc .. i know it's a bit late but it works like a charm :D all my settings for the pocket alarm, my screen alignment (because it's different that yours) my touchpal pass ... who hoo. ... yeah yeah i know it's late but better late then never

[pkoper]

Kaiser also germ and a dutch version for WM6.1

http://forum.xda-developers.com/showthread.php?t=379554
German WM6.1 for Kaiser, Yay
So some new MUI files.

You need Winzip to get the nbh file out.

And you need the kaiserkitchen to extract OEM and SYS folders.
Kaiserkitchen is in Kaiser Wiki with tute.

Jus replaced Simmanager and WLM.

Java and Arcsoft will take longer.

Excellent, what I've been waiting for....

German (100%) WM6.1 on its way.... :-)

[Noonski]

Re-MI yes i removed and added a few thingies.

the welcomehead seemed to be corrupt also in my preconfig.

And i added the new Skype Dll's to ROM for SD install support.

And only Esmer Java 3.1 And SimmManager 6.41


PKoper.

Life can be easy huh.
He's also got a dutch version.

[Re-Mi]

the welcomehead seemed to be corrupt also in my preconfig.

He's also got a dutch version.

The welcomehead works fine by me ;) ... changed it to one of my own.

And the dutch version... is it a hint or a note that you will release a NLD version soon :P or maybe i will give it a shot again to try.. but i'm not promessing anything.

:D

[pkoper]

Has anyone succesfully changed the pagepool in a 6.1 yet?

[Noonski]

Has anyone succesfully changed the pagepool in a 6.1 yet?


If you can change the kaiserkitchen to extract an ELF rom.

We can then Port the Payload file and .VM folder to Bepe's Kitchen (if you extract any 4MB ELF only Rom).

At least it's a theory.

And off course that kitchen needs some Modds to work with ELF.


I will make a Dutch version yes. but.... I take my time and WWE isn't as perfect as i want it to be yet.

[pkoper]

Thats probably a little bit beyond my capabilities...

At the moment I am happy that I got the Kaiser OS "transferred" to the Bepe kitchen... and its all in German.

Guess its long nights again....

[Noonski]

Thats probably a little bit beyond my capabilities...

At the moment I am happy that I got the Kaiser OS "transferred" to the Bepe kitchen... and its all in German.

Guess its long nights again....

It's also beyond my capabilities.

But i have hope and a site full of documentation ;)

And i'll just aply the scientific method.

Open, look inside.
Replace and test, replace and test. replace and test.

I Hate XDA... :mad:

And here's first Beta of ArcsoftMMS5.

http://forum.xda-developers.com/attachment.php?attachmentid=77544&d=1206454772

Previous posted package somewhere on XDA was missing some registry keys and had the iniflashfiles.txt file still in it ;)
(no i did not make it)

The reason why this is beta is because the playback of the new Voicemail frunstion isn't working and i want to seperate MMS / SMS for HTC New Menu integration.

I would like to repeat that i don't know what i'm doing (as long as it just works)

Anyone here that uses GPS mouse with his touch?
I would like to see if it's interesting to port new HTC QuickGPS (whatever it might be) into Touch.

[Switchcorp]

I'm using my touch with a BT GPS ;) What's the function of quickgps ?

[pkoper]

somehow the splashscreen does not display anymore with the ported kaiser stuff... anyone a solution?

[Noonski]

Never tried the HTC app and don't know what it's for.


But maybe better news.

I just put the Blue Elf 4 .nbh file into kaiser kitchen.

It crashed...

But not after creating the Payload.nbh file.

So i just put it in Bepe's kitchen and i'm now extracting the Blue elves .vm and.rom folders in Hyper Core.

Pray this doesn't brick my device.

And pray this gives us 4MBPP or even better a pagepool we can edit.

Okay Switched .vm folders. ran G-reloc.

Now Cooking.

Pray...

Now Flashing 30%

It boots past first screen..

It boots to second and third screen....

So far so good...

It runs autorun...
two more minutes...

Resetting device.. Still looking Good.

[pkoper]

time is up, whats the verdict?


I am praying....

fingers crossed

[Noonski]

time is up, whats the verdict?


I am praying....

fingers crossed

Aaargghgh didn't work.

But it also did not brick my device.

i need to check the Ruu i used.

Nope the Ruu was allright...

Feck i needed to place the payload in Rom folder again let's go...

[zyncmaster]

http://rapidshare.com/files/10209483....09.SP1.75.zip

Yeah it's the Almost finished version with some new stuff and new Screenaligment.xml file.

hi Noonski,

i just flashed the new SP1 rom... it feels/looks better n improved.. :) got to ask you how to set the camera button for camera... tried but cudnt figure out.. can u explain... thanks in advance.. sorry to ask a noob question!! :confused:

Also there's some weird things going on with MyMyScreenAlignment settings you had put in the current rom... when u move to another rom, the touch screen is totally insensitive and behaves badly!! :( there's no screen alignment option at the beginning of rom customization! it would be nice to know how to do the realignment... i cant go even go to the menu option to do a realignment... !!!