help in jamin stop in boot loader moood

[melmel1989]

hello to all

i have now device stop at 3 colure menu and not more

ipl 1.00
spl 2.20.0001

and can't start any room

can i use mtty like jasjar

or any advanced please ?????

thx to all

[xavi_bcn]

Hi:

Sorry my english isn't good. I'm spanish.

I read some forum but i don't read the same problem I've.

I've a imate jamin. Last sunday I installed a new rom made by Franlov (WM6.1 Clear). First i make a hardspl and installed the new rom. Well.

After i need install the original rom, but the problem now is:

Jamin KO.
Three color display and the red numbers:
IPL 2.13
SPL 2.13.0001

If I execute a romupdateutility G3, i've a error 300, invalid tool.
If I execute a romudateutility G4, i don't have error but i've the same display (three colors, etc)

I can't make a hardspl because the jamin doesn't run and msdos display says "any device connect".

CAn you help me?

I read it's possible downgrade ipl and spl making a force spl but the program i don't know if exist for jamin or s200.

THANKS

my email: x.roig.badalona@gmail.com

THANKS THANKS THANKS THANKS

[TJSM]

hello to all

i have now device stop at 3 colure menu and not more

ipl 1.00
spl 2.20.0001

and can't start any room

can i use mtty like jasjar

or any advanced please ?????

thx to all

I have the same problem! I cannot active sync as it does not connect to the device. So I cannot flash.

IPL 2.13
SPL 2.13.0000

We tried but can not find solution!

I am tired of asking for help, and nothing!

[aia_6584]

Hi guys..im a newbie..been there myself...Wat u need to do is download the wm5 original rom from http://www.v-dog.net/XDA/PVTemp.zip & unzip it to sum location of ur pc then connect ur device & wen the 3 color screen comes run the RUU Utility G4... Thats it ...u'll be back to WM5

[aia_6584]

After that just follow this awsum guide by dioxda2 http://forum.xda-developers.com/showthread.php?t=353547

[TJSM]

Hi guys..im a newbie..been there myself...Wat u need to do is download the wm5 original rom from http://www.v-dog.net/XDA/PVTemp.zip & unzip it to sum location of ur pc then connect ur device & wen the 3 color screen comes run the RUU Utility G4... Thats it ...u'll be back to WM5

We tried! The problem is that active sync as it does not connect to the device.That is the big problem ....

[dioxda2]

We tried! The problem is that active sync as it does not connect to the device.That is the big problem ....

1. go to my guide, download PVtemp first ~~~~

2, force the prophet to bootloader mode, (how to? see my thread) :D

3. plug back to USB ( rear PC USB port please...)

4. if you see the "USB" on the left bottom Prophet screen, YOU ARE DONE!!!!

5. Flash PVtemp NOW .... delay is bad~~~~ ;)

[mohammad3005]

hi,i have a IMATE JAMIN.my phone Does'nt boot after install wm6 & other program.when it turn on display
ipl2.13.0001
spl2.13.0001
gsm02.20.21
os10.2.0.8
after display a black screen & does nothing.
and USB Does'nt recognize my device.
can you help me?

[ninetyperz]

have you tried to Hard Reset the unit after flashing to WM6.1?

You can try it by pressing CAMERA + COMM Button + Reset Button (for 3 seconds)