View Full Version : Whats the Best Screen Protector for Kaiser?
mcq3000
10th February 2008, 10:39 PM
I bought an el cheapo one from ebay and not only does it feel horrible to the touch the edges are starting to fray. I had bought one for my ppc 6700 like 2 years ago that looked like nothing was on the screen and had great tactile feedback, which ones do you recommend for our kaisers?
mZimm
10th February 2008, 11:36 PM
I have purchased many screen protectors from cheap sites as well as expensive ones. My favorites are the ones from InvisibleShield. They are a bit more expensive, but they are very precisely cut and last a long time. If they ever get scratched you can get them replaced for free as well. I have not tried BodyGuardz, however, which are the same price, but you get two instead of one in the package.
onyyf qrrc
11th February 2008, 05:35 AM
I like the Boxwave Cleartouch a lot.
If you are anything like me, buy the three pack because you'll probably mess up at least one putting it on. While they say you can wash and reuse them, I don't think it's worth it.
That and a can of compressed air to blow the dust off before you put it on and you should be good.
Side note about using a compressed air can - don't use the straw. I had it blow off directly at my screen and thought my screen was permanently damaged. Thankfully, I had been using the screen protector that came with the tilt which has a bit of adhesive on it, so I only "scratched" the adhesive.
Edvard_Greig
11th February 2008, 05:57 AM
I have purchased many screen protectors from cheap sites as well as expensive ones. My favorites are the ones from InvisibleShield. They are a bit more expensive, but they are very precisely cut and last a long time. If they ever get scratched you can get them replaced for free as well. I have not tried BodyGuardz, however, which are the same price, but you get two instead of one in the package.
I have one of the InvisibleShield HD ones on mine, it is really crisp/clear, doesn't really show fingerprints at all, and its been on my phone for a few months now, and still looks like new.
The only thing I'm not sure of, is that it seems like it may reduce some of the sensitivity of the touchscreen because it is thicker, YMMV though.
I also have the bodyguardz themselves on too, and I'm not nearly as impressed, I'm probably going to pick up one of the Seidio slim rubberdized cases, just trying to spread out the accessory cost right now :-)
j4s0ni2ice
11th February 2008, 07:52 AM
... the one it came with. Still looks new.
crusti
11th February 2008, 09:41 AM
im in the UK, i buy 3 screen protectors for asda for £2.99 (guessing thats about $5), so id guess walmart would be a good place to look for cheap ones.
ive had to cut it down to size for my hermes but the screenie i have on it has last over a year
ive also put these screenies on family and friends phones and cameras, no one come back to yet complaining.
fone_fanatic
11th February 2008, 10:09 AM
My first windows mobile device was in 2002 and i tried every cover for it. From cheap ones to a couple of the more expensive ones. One of which was the PocketPCTECHS writeshield protector.
I bought the double pack, which came with the Antiglare one, and the Crystal Clear one. I applied the Crystal Clear one and it was amazing... i never used the anti-glare till i got my next device and threw it on that one.
They are very durable, can barely tell they're there and are just amazing...
But for my kaiser, i just ordered the invisibleshield for the entire device so i thought, why not let me try their screen protector out and see how it holds up.
so till i try out the invisibleshield, i'm still recommending pocketpctechs.
doublev
11th February 2008, 12:25 PM
Martin Fields. As long as you install it properly (cleaning part is very important), you don't even know it is there.
246810
11th February 2008, 01:35 PM
This topic has been covered numerous times before:
Martin Fields Screen Protector
http://forum.xda-developers.com/showthread.php?t=358845
What is the best thing to protect my screen?
http://forum.xda-developers.com/showthread.php?t=353006
Invisibleshield - Does it affect touchscreenability?
http://forum.xda-developers.com/showthread.php?t=353394
liquid screen protector
http://forum.xda-developers.com/showthread.php?t=352818
ClearTouch Crystal Screen Protectors - How Do I Remove?
http://forum.xda-developers.com/showthread.php?t=349407
Using another screen protector
http://forum.xda-developers.com/showthread.php?t=344452
Brando screenprotectors available
http://forum.xda-developers.com/showthread.php?t=329280
-haze-
11th February 2008, 05:21 PM
Expert Shield screen protectors are just as good as the Martin Fields and a fraction of the price. You can get it for $7.25 shipped.
I have purchased from this ebay seller MANY times. Great communication and fast shipping.
http://cgi.ebay.com/ES-Screen-Protector-Cover-for-HTC-TyTn-II_W0QQitemZ120219762668QQihZ002QQcategoryZ116221Q QssPageNameZWDVWQQrdZ1QQcmdZViewItem
www.expertshield.com
phonegeek91
2nd May 2008, 07:48 AM
Think if you using the highe durability thicker screen protectors the increased pressure sensitivity will help alot - am just using the one that came with the TILt on it and it greatly improves tactile feedback and response is almost instantaneous with very minimal pressure
Q: How do I increase the sensitivity of the touch screen?
A: If you want to increase the sensitivity of the touch screen, I recommend setting the registry key (HKLM\Drivers\?TouchPanel\Pressure Threshold) to 5000. It may seem a little high, but the response time is practically instant, and very little pressure required (still enough to avoid accidental presses).
m.photo
20th May 2008, 08:21 AM
Mine is another vote for the Expert Shield and/or Martin Fields.
Just got it at around seven bucks shipped from eBay. I (prior to this) ordered a Martin Fields and had a difficult time applying it to my Tilt without creating air bubbles. I'm clumsy. and I sneezed half-way through. It's definitely high quality and far better then what shipped with my Tilt. Anyway, I took it into the bathroom and left it to dry so I could attempt to re-apply it later. There, it promptly slipped into the space between the sink cabinet and the tub. Goodbye Martin.
* sigh *
The ES protector seems to be just as good - they're both excellently cut and you can't go wrong with either of them. I don't feel it impairs the screen at all - stylus and finger use ( I use my finger all the time ) are pretty much as it was without the protector. Maybe a tiny touch less sensitive, if you're picky....one can increase sensitivity to compensate. I myself did not find this necessary.
I hope this can be of use to anyone considering the choices. I think a screen protector is a must if you care about your device. I had little regard for my HTC 8125, which lived in my pocket up until last week. The screen held up pretty well, considering it's been to PPC Basra and back. It shared the pocket with my keys, various automotive tools, nuts, bolts, and large quantities of quarters.
-haze-
23rd May 2008, 12:11 AM
Mine is another vote for the Expert Shield and/or Martin Fields.
Just got it at around seven bucks shipped from eBay. I (prior to this) ordered a Martin Fields and had a difficult time applying it to my Tilt without creating air bubbles. I'm clumsy. and I sneezed half-way through. It's definitely high quality and far better then what shipped with my Tilt. Anyway, I took it into the bathroom and left it to dry so I could attempt to re-apply it later. There, it promptly slipped into the space between the sink cabinet and the tub. Goodbye Martin.
* sigh *
The ES protector seems to be just as good - they're both excellently cut and you can't go wrong with either of them. I don't feel it impairs the screen at all - stylus and finger use ( I use my finger all the time ) are pretty much as it was without the protector. Maybe a tiny touch less sensitive, if you're picky....one can increase sensitivity to compensate. I myself did not find this necessary.
I hope this can be of use to anyone considering the choices. I think a screen protector is a must if you care about your device. I had little regard for my HTC 8125, which lived in my pocket up until last week. The screen held up pretty well, considering it's been to PPC Basra and back. It shared the pocket with my keys, various automotive tools, nuts, bolts, and large quantities of quarters.
Sorry to hear about your situation. I know I've screwed up a few of mine in the past. I have Expert Shield protectors on every device I've owned. Nokia 6820, 6822, E-70, PSP, my girl's Sony-Ericsson w850i, LG Shine, my friend's LG Chocolate and I've never had a problem with them.
I'm glad you enjoy yours as much as I do. :D
monster2223
27th May 2008, 02:58 AM
has anyone ever tried these?
http://www.thepocketsolution.com/PSI-42588.html?gclid=CPeS1r25xZMCFSQtagodiEn8Cw
dampeal
27th May 2008, 03:44 AM
I got the Boxwave Cleartouch Crystal and the Anti-Glare, used both for two weeks and I settles on the Crystal..
I just don't like how the Anti-Glare makes the screen look, the Crystal on the other hand is like having nothing on the screen at all it's perfectly clear and well the Anti-Glare really wasn't Anti-Glare..
both are nice and thick and I didn't have to adjust the sensitivity on my Tilt either to use them
MooCan
31st October 2008, 03:15 PM
Hi,
Someone can say me if WriteShield Screen Protector fit exactly the screen size of the Kaiser without leaving some screen surface unprotected ? Or which one fit exactly the screen's size ?
Thanks in advance
Moo
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.