ROM upgrade error

[GiangiUSA]

Hi to everybody, I have a great problem.
I was upgrading my Tytn to WM6 Black (Dymond) when at about 30% an error occurred: it said that the cable wasn't connected. My device only showes the three color screen, the PC doesn't recognize it any more and I don't know how to solve this problem. Is possible to get my hermes back to the normal status?
Please help me.
Thak you all,
Giangi.

[igord]

Please read the WIKI and provide more info, SPL?

[GiangiUSA]

These are my info:
I tried to upgrade (that wasn't my first upgrade) my Tytn to WM6 black, and I don't know why or how, it stopped upgrading (maybe at 30%...i don't remember because of little panic). I tried to upgrade again but it always stopeed. Then I disconnected the device and it has never booted any more. Now I can only see a screen with 4 colored strips. That's all.
No hard reset, no soft reset. Nothing seems to work.

[GiangiUSA]

Please, is there abybody could help me?
I can only put my Tytn in bootloader mode. As Windows XP doesn't recognize it any more, is possible to upgrade the device in that mode? I would try to do it.
Please give me a hand...

[pedro2k]

Read this to unbrick

http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick

Answer questions 1 to five then look at the table for the proper solution.

I'm not sure if this would work out, but you can also give this one a try. See problem number 4

http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems

Good Luck :)

[GiangiUSA]

Thank you, I'll try to take a look later.
Let's hope for the best...

[GiangiUSA]

Hi again, I have a question: is possible to flash the ROM in bootloader mode?
for example using mtty?
I can't find any useful info for me...

[XtreMe_G]

dude, all the info you need is in the links that pedro2k gave

[mrvanx]

People please refer to the relevant threads on this topic, all the info required is already available. ;)