TyNT 2 Preinstalled TouchFlo Help?

[Rekoo]

Hy guys! First of all I'd like to say you are doing a great job here! You already helped me with my old vpa compact II to realize that my Wlan Hardware Modul is a piece of grap and therefor I bought a brand new HTC TyNT II to use my Exchange Server in the right and working way!

Here comes my issue:
- I'm very interested in using the Cube Software so I read plenty of posts and threads to make it work, but it won't run! (Yes I'm a noob to WM6, before my Compact II with WM5 i used Palm OS)

After Installing the FTouchFlo_v1.4.1 and the SCLPF_1-62 as written in the manuals and configuring the right way, it won't work. My device has a preinstalled AdobeReaderLE2.0 so I additionally tried installing the FlashPlayer but with no changes. Furthermore my installing paths are different because of a german installation (the adobereader is in windows root with ppc_adobereader.exe)
I encountered these problems:
- The finger navigation won't work at all (with and without Extra Software)
- TouchFlo configuration is IMO correct, but swf files won't open in adobe's reader

Enervated I did a HardReset and recognized a PreInstalled version of TouchFlo on my Device! But there are no settings to change, the manual also says "Use it for big content to easily navigate with your fingers" but it won't work! Also I read that the device comes along with NO TouchFlo Preinstalled in other threads except here.

I'm confused, and maybe someone can help me out! If I posted this thread in the wrong place please do not hesitate to move it!

Thanx
Rekoo

[DaveShaw]

Hy guys! First of all I'd like to say you are doing a great job here! You already helped me with my old vpa compact II to realize that my Wlan Hardware Modul is a piece of grap and therefor I bought a brand new HTC TyNT II to use my Exchange Server in the right and working way!

Here comes my issue:
- I'm very interested in using the Cube Software so I read plenty of posts and threads to make it work, but it won't run! (Yes I'm a noob to WM6, before my Compact II with WM5 i used Palm OS)

After Installing the FTouchFlo_v1.4.1 and the SCLPF_1-62 as written in the manuals and configuring the right way, it won't work. My device has a preinstalled AdobeReaderLE2.0 so I additionally tried installing the FlashPlayer but with no changes. Furthermore my installing paths are different because of a german installation (the adobereader is in windows root with ppc_adobereader.exe)
I encountered these problems:
- The finger navigation won't work at all (with and without Extra Software)
- TouchFlo configuration is IMO correct, but swf files won't open in adobe's reader

Enervated I did a HardReset and recognized a PreInstalled version of TouchFlo on my Device! But there are no settings to change, the manual also says "Use it for big content to easily navigate with your fingers" but it won't work! Also I read that the device comes along with NO TouchFlo Preinstalled in other threads except here.

I'm confused, and maybe someone can help me out! If I posted this thread in the wrong place please do not hesitate to move it!

Thanx
Rekoo

Is it FTouchFloCnfig enabled on the General Tab?

What settings do you have in the Gestures tab for running the Cube?

[Rekoo]

Thanx for the reply!

Yes the FTouchFlo is enabled!

I'll post the settings file:
"-----------
; FTouchFlo configuration file
Delay:100
GestureWaitingDelay:300

;To disable scrolling use DisableScroll:1
; to enable scrolling use DisableScroll:0
DisableScroll:0


;This is the path to Adobe Flash Lite please find where it is installed on your device and correct it.
UpDownApp:/Programme/Adobe/FlashLite/saplaywm.exe

;Do not change this line.
UpDownAppCmdLine:"/Application Data/SCLPF/StartApps.swf"

;This is the path to Adobe Flash Lite please find where it is installed on your device and correct it.
DownUpApp:/Programme/Adobe/FlashLite/saplaywm.exe

;Do not change this line.
DownUpAppCmdLine:"/Application Data/SCLPF/StartMusic.swf"

;This is the path to Adobe Flash Lite please find where it is installed on your device and correct it.
LeftRightApp:/Programme/Adobe/FlashLite/saplaywm.exe

;Do not change this line.
LeftRightAppCmdLine:"/Application Data/SCLPF/StartMain.swf"

;This is the path to Adobe Flash Lite please find where it is installed on your device and correct it.
RightLeftApp:/Programme/Adobe/FlashLite/saplaywm.exe

;Do not change this line.
RightLeftAppCmdLine:"/Application Data/SCLPF/StartContacts.swf"

; Exclude applications
Exclude:TomTom Navigator
Exclude:Flash lite
Exclude:htcalbum.exe
Exclude:saplaywm.exe

; end of configuration
----------------"

[DaveShaw]

I take it FlashLite is installed in /Programme/Adobe/FlashLite/saplaywm.exe ?

mine installed into:
"/Program Files/Adobe/FlashLite/saplaywm.exe"

[Rekoo]

This is what I mentioned with German Installation! The Directories are named differently! So far I don't know if the software settings require the exact same path's or as I did just point to exe.

thanx

[DaveShaw]

This is what I mentioned with German Installation! The Directories are named differently! So far I don't know if the software settings require the exact same path's or as I did just point to exe.

thanx

Can you open FlashLite from this location (browse using File Explorer) and then load the swf File from there?

[Rekoo]

:p ahhhhh, i get the screen, but ftouch won't work! maybe the delay or something is too long... I'll check different settings with the delay thing.


after trying:
I can select the the single swf's to open in flashlite, I can perform the buttons click, but the crossing finger action won't work.
Thanx for your help. I'll will delete the software. maybe I find a solution later and try it again


thanx

[DaveShaw]

:p ahhhhh, i get the screen, but ftouch won't work! maybe the delay or something is too long... I'll check different settings with the delay thing.


after trying:
I can select the the single swf's to open in flashlite, I can perform the buttons click, but the crossing finger action won't work.
Thanx for your help. I'll will delete the software. maybe I find a solution later and try it again


thanx

You need to set an action for crossing finger in FTouchFlo Config.

I suggest you use the C++ cube from Slither. It's very quick and lite, and doesnt require flash.