Flashing ATT/HTC 8525 rom via SD Card-Wiki didnt help

[CjHTC8525]

Hi Guys,

I was hoping you can help me out. I have an HTC 8525 that no longer connects to my computer via USB. I believe that a pin on the inside is damaged. I would like to upgrade to the Schaps ROM but have not found a way to flash from my microSD card. I read the information in the Wiki but when following the steps I end up at a screen with red, blue, green, and white bars that say serial. After hitting the power button the flash does not start. Am i missing a step or is what I'm trying to do not possible?

Thanks in advance for any help,

Chad

[XtreMe_G]

did you rename the nbh file to HERMIMG.nbh? and make sure the card is formatted to fat32

more importantly........did you hardspl your device first?

[CjHTC8525]

Yes and Yes. I did not HardSPL my device. I'll have to see if I can find instructions in the forum.

[CjHTC8525]

If its helps my bootloader screen shows IPL-1.04 on the red color and HEM 100 SPL-2.03 also on the red tabl

[igord]

You need do do HARD SPL if yoy want to flash from SD card.

[CjHTC8525]

How do I that if I cannot connect by device via USB?

[CjHTC8525]

Can anyone advise me as to whether or not it's possible to install hard SPL without being able to use active sync?

[koorosh_bsboys]

it is possible!
1. Format your SD card with FAT32.
2. Download Hermes SIM CID Unlock v3a.
3. Copy SSPL-HERM to your SD card.
4. Extract the RUU_HERM_Unlock_v3a.
5. copy HermesUnlocker_HardSPL.nbh to SD card.
6. Rename it to HERMIMG.nbh.
7. put the SD card into the device and run sspl.exe.
8. the device enters the bootloader and ...

[CjHTC8525]

Thanks. You're the man. That worked like a charm

[LlamaLord]

http://youtube.com/watch?v=yoN7dMm8KEY

Try that i have made one for the Wizard also Check them out hope they work