I need SERIOUS HELP, Help ME!!!!!!!!!!PLEASE

[JonnyBoy313]

I have a Mogul. That was Running 2.17 Official, tried to install DCD 2.1.0SPRINT, Said it installed successfully, on reboot it GETS STUCK IN HTC BLACK SCREEN. I tried to run RUU, GET ERROR 260. I can't connect through activesync either, Then I read To try to flash through SDCARD the official 2.17 renamed To TITAIMG. IT GET STUCK IN LOADING SCREEN, WHICH I LEFT RUNNING FOR OVER A HOUR, I ran out of ideas, and I hope I didn't brick My month old phone PLEEEEEEEEEEAAAAAAAAASE HELP ME

[cohowap]

Did you not read any directions or other posts?

You need to make sure you have the new radio, otherwise any rom that is 3.16 based will do this.

Flash original 3.16 to get the radio on the phone then do DCD's rom.

Also, try not to post retarded type like that makes it really hard to understand what your trying to say.

[JonnyBoy313]

Well thanks I guess, and I ll will try

[cohowap]

Go into bootloader mode before flashing to ensure a good flash.

[JonnyBoy313]

That has to be a .nbh renamed To TITAIMG right, and if so do you have a link. For some reason mine is a .exe

[mrvanx]

That has to be a .nbh renamed To TITAIMG right, and if so do you have a link. For some reason mine is a .exe

Open it up with winrar (or similar) to get the nbh file. Dude this is all pretty obvious stuff remember to do some more research into the device and its quirks before doing anything else ;)

[JonnyBoy313]

Man I looked In the winrar, And only 1 thing is in there and it was
3.16.651.0.exe. That is why I asked for a link to the right one, and I reaserched this and other sites for four days before I tried this.
It was the best I can do without hands on, Sorry to be such a burdan.
But I though this site would help me.

[mrvanx]

Man I looked In the winrar, And only 1 thing is in there and it was
3.16.651.0.exe. That is why I asked for a link to the right one, and I reaserched this and other sites for four days before I tried this.
It was the best I can do without hands on, Sorry to be such a burdan.
But I though this site would help me.

Extract the exe then take a look inside that one?? We aim to help all users but it is a two way process dude ;)

[JonnyBoy313]

sorry I dont know tried to open but a little black screen flashed.
Should i look for a different 3.16 rom.

[JonnyBoy313]

yea my 3.16 must not be real. Might be a dumb question, but I just want to ask. Can you flash a .exe on your phone

[JonnyBoy313]

Sorry for any confusion, Can flash .exe through sc card

[cohowap]

Your making it harder than it is.

1) Extract the exe via winrar.
2) Manually enter bootloader mode
3) Run the upgrade from a Windows XP Machine to be safe (just run the exe).
4) Let the device start

Fixed your phone in 4 steps.

[bakntyme]

Your making it harder than it is.

1) Extract the exe via winrar.
2) Manually enter bootloader mode
3) Run the upgrade from a Windows XP Machine to be safe (just run the exe).
4) Let the device start

Fixed your phone in 4 steps.

Don't forget step 1.5: Connect the phone to the USB port on the Windows XP machine.