stuck in bootloader - HELP !!!!

[mzaslam]

Ok - So I have a mde very noobish error. I have in the past flashed my Kaise to a number of cooked ROMs but had recently just got hold a replacement handset from T-Mobile UK.

I was inteding to load Duttys new WM6.1 ROM and so ran JumpSPL from my phone but then proceeded to flash duttys ROm without flashing HardSPL first !!!

The ROM loaded but now my phone is stuck in the bootloader and whatever I do - I cant get by it or flash any other ROM or anything.

Whatever I try I either get Error 262 or 292 (I think) which is invalid Vendor Id. I have searched but cant find a solution.

Please help me !!!!

[jockyw2001]

See the second post in this thread:
http://forum.xda-developers.com/showthread.php?t=369812

[mzaslam]

See the second post in this thread:
http://forum.xda-developers.com/showthread.php?t=369812

I have tried a hard reset (power + camera keys) but nothing - the phone still boots to the tri-color bootloader screen.

anything else I can do? I'm really starting to get worried...

[mikechannon]

I have tried a hard reset (power + camera keys) but nothing - the phone still boots to the tri-color bootloader screen.

anything else I can do? I'm really starting to get worried...

The key combination you are using is to enter Bootloader Mode.

Better read here:
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Resets

Mike

[mzaslam]

The key combination you are using is to enter Bootloader Mode.

Better read here:
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Resets

Mike

hi mike,

sorry - my bad.

Anyhow - I tried that and its STILL booting straight into the bootloader screen !!!

aaaarghh....

[Zoisite]

hi mike,

sorry - my bad.

Anyhow - I tried that and its STILL booting straight into the bootloader screen !!!

aaaarghh....

You should be able to install hardspl from that bootloader screen, I had to do it for a friend who bricked his kaiser in the same fasion.

[mzaslam]

You should be able to install hardspl from that bootloader screen, I had to do it for a friend who bricked his kaiser in the same fasion.

I did try that but didn't work. I will give it another go now and post back.

UPDATE: I cant get past the first bit where it needs the activesync connection enabled i.e. icon to be GREEN. This isnt gona happen coz I can't get the phone to boot.

what next? Its looking like I complectely messed my phone up...

[mzaslam]

anyone else have any ideas? I'm getting desperate here... hey I will even donate if I have to - just help me bring my phone back from the brink!

[jockyw2001]

anyone else have any ideas? I'm getting desperate here... hey I will even donate if I have to - just help me bring my phone back from the brink!
I've given you a good advice, why don't you try it ?

[mzaslam]

I've given you a good advice, why don't you try it ?

hey jockyw2001

I have tried a hard reset but even after doing it - the phone STILL insists on booting into the tri-color bootloader screen.

I definitely was not ignoring your advice as you were the first person kind enough to respond with a possiblt solution to my problem. Unfortunately, didnt work.

Also, I have found that if I try to re-flash the original ROM I get an INvALID VENDOR ID message - obviously down to the fact I dont have HardSPL flashed. I cant flash HardSPL either.

Do you have any other ideas/suggestions I can try please?

UPDATE: Sorry, I think I was looking at the wrong post - what is MTTY and where can I get it please?

[jockyw2001]

hey jockyw2001

I have tried a hard reset but even after doing it - the phone STILL insists on booting into the tri-color bootloader screen.

I definitely was not ignoring your advice as you were the first person kind enough to respond with a possiblt solution to my problem. Unfortunately, didnt work.

Also, I have found that if I try to re-flash the original ROM I get an INvALID VENDOR ID message - obviously down to the fact I dont have HardSPL flashed. I cant flash HardSPL either.

Do you have any other ideas/suggestions I can try please?
Have you actually read what I linked ?
Currently there are at least two other guys having the same problem. Please start reading the current threads.