ERROR [260] Connection installing WM 6.1??? what to do?

[pyk]

Hi
Tried installing the HTC 6.1 Rom RUU_Kaiser_HTC_WWE_3.03.405.0_radio_sign_25.70.40. 02_1.64.06.04
on my TyTn II from Vista and XP but i still get the same Connection Error.
Can somebody help with this
Thanks

[NotATreoFan]

We need more info to properly troubleshoot...

Make of phone (TyTn II, Tilt, Vario III, etc)

If you are trying to use this rom on anything other than an unbranded HTC TyTn II, then it will not work unless you have used HardSPL to remove carrier branding first.

Check out http://forum.xda-developers.com/showthread.php?t=369282 for more info.

[GSLEON3]

260 errors are usually related to USB port access. If you are using McCafee or Firewall software, you will have problems unless you disable or gifve full access.

Again, to quote NotATreo, more info will help, but consider temporarily disabling firewall or virus software.

[pyk]

Thanks guys
Its the HTC TyTn II and the rom im trying to flash is the 1 released by HTC so i assume its the other problem, yes iam running mcafee firewall, ill disable that and try flashing.
thanks a lot

[MsAzzy]

Thanks guys
Its the HTC TyTn II and the rom im trying to flash is the 1 released by HTC so i assume its the other problem, yes iam running mcafee firewall, ill disable that and try flashing.
thanks a lot

I was able to flash while running the mcafee, but I still can't connect to the internet after flashing the Hard SPL and the radio

[Penske MB]

Have you try using SD card to flash?

just renamr file "RUU_signed.nbh" to "KAISIMG.nbh" and place the file in your Micro SD card.

Power on the phone and enter bootloader mode by press "power botton" + "camera botton" and using stylus to reset the device. It will auto start reflashing the ROM. It only takes 1min to 2min.

[pyk]

Tried the mcafee thing but then it gave me the Vendor ID Error
Basically there is no way around except for flashing the Hard SPL and removing the vendor thingy.
Not sure if i want to do that cause that will void the warrenty.
Tanks so much guys

[~~Tito~~]

Well, technically you are but they don't know it untill you make it noticable and there are ways to make it back to OEM.

[AllTheWay]

Hi
Tried installing the HTC 6.1 Rom RUU_Kaiser_HTC_WWE_3.03.405.0_radio_sign_25.70.40. 02_1.64.06.04
on my TyTn II from Vista and XP but i still get the same Connection Error.
Can somebody help with this
Thanks

Just flash while you are in bootloader screen (tri-color)

[pyk]

Tried putting in bootloader mode and flashing but the same Vendor ID Error, dont have a choice but to Flash the Bootloader. Dont want to do that cause had a Problem with my previous Imate phone, the service center guys checked that 1st.
thanks

[Penske MB]

well... When I purchase a new phone, I never think about returning it unless DOA. When I flash my Tilt and iPhone, there is no turning point. Oh well, I change a new phone almost every year......Currently wait on my new N96:)

Tried putting in bootloader mode and flashing but the same Vendor ID Error, dont have a choice but to Flash the Bootloader. Dont want to do that cause had a Problem with my previous Imate phone, the service center guys checked that 1st.
thanks

[josiahmgillespie]

well i had to do the same thing but i just used jump.spl. it worked great and now im runnin wwe 6.1.