Dutty Official 6.1 & Bluetooth? Is it working

[lancevs]

sorry if this has been covered, but ever since i swithed to the 6.1 roms
i can not seem to get my bluetooth headset working. I can pair the device
but when i press the button on my headset nothing happens. If i hold the button in it dials the last number.

Anyone else experiencing this? Was working fine prior to 6.1 for me and
have done the process 100 times so i know i doing everything right.

6.1 does not prompt me for the device password "0000" ...

[dpdpkpcom]

sorry if this has been covered, but ever since i swithed to the 6.1 roms
i can not seem to get my bluetooth headset working. I can pair the device
but when i press the button on my headset nothing happens. If i hold the button in it dials the last number.

Anyone else experiencing this? Was working fine prior to 6.1 for me and
have done the process 100 times so i know i doing everything right.

6.1 does not prompt me for the device password "0000" ...

Funny you should say that. I have been trying DCS1.3 and the bluetooth works fine (both headset and a2dp profiles) and in Dutty's 6.1 rom (WHICH IS SUPERB I MUST SAY !!!) the headset profile works fine but the a2dp stereo occasionally cuts out. Done it a few times and it wasn't a range issue or anything. Anyone else had this !!

It's a shame because dutty's 6.1 rom is amazing. Love the speed of the cube and the beautiful icons !

Is it just me or has anyone else experienced this ?

[lancevs]

am i the only one with this issue?

[epijay]

Mine works fine- I have three headsets and a Bluetooth GPS synced up.

[Penske MB]

pairing is no issue for me. I cant get the BT working with Voice Dialer.

Few ppl including myself have ask for solution in Dutty's thread, but no luck. I am currently using 3.03 leak version and it works great.

[P1Tater]

Did you HARD RESET after flashing the 6.1 rom at the "tap here" screen?

[Penske MB]

Yes.

Hard reset anf reflash few times... no go...

Did you HARD RESET after flashing the 6.1 rom at the "tap here" screen?

[AllTheWay]

Yes.

Hard reset anf reflash few times... no go...

I remember there being a bluetooth fix with something.

Do any of these work?

[Penske MB]

tried both..... still no go

when BT botton was press, it went to dial pad instead voice dialer..

I remember there being a bluetooth fix with something.

Do any of these work?

[AllTheWay]

tried both..... still no go

when BT botton was press, it went to dial pad instead voice dialer..

do you map the keys correctly?

[Penske MB]

There is no setting to map the BT earpiece's botton.....

If any, plz let me know.

do you map the keys correctly?

[dave_a]

I have only just installed the new ROM and ran a few quick tests with the parrot minikit. It paired okay but then I had a few intermittent problems. Sometimes dialling from the phone would not automatically transfer to the minikit and sometimes I could not transfer a conversation from the phone to the minikit. Other times these worked okay. I did not try answering from the minikit as no-one called me while I was testing.

Only tried this once so will try again tonight and then try the bluetooth fixes and report back.

Using Radio 1.64.08.21 on Orange TyTN II and did the hard reset after installation.

[AllTheWay]

There is no setting to map the BT earpiece's botton.....

If any, plz let me know.

Start > Setting > Buttons.

[Penske MB]

Again...tried... map the botton..... i have try everything I can think of, but... no solution....

BTW, the botton 6 "PTT" map will start the voice dialer. BUT... what I need is press the botton on BT device to start voice dialer and I will heard a "beep" to start voice dialer while I am driving or doing oter thing without touch my phone. When I press the botton on BT device, it goes to dial pad or I can't heard the "beep" again, and it start the voice dial in "mute" mode... I have never experience in any other ROM I tried before. So far I have not yet found any solution. I need the BT device, because I am always on phone while doing other things.
Start > Setting > Buttons.

[lancevs]

Again...tried... map the botton..... i have try everything I can think of, but... no solution....

BTW, the botton 6 "PTT" map will start the voice dialer. BUT... what I need is press the botton on BT device to start voice dialer and I will heard a "beep" to start voice dialer while I am driving or doing oter thing without touch my phone. When I press the botton on BT device, it goes to dial pad or I can't heard the "beep" again, and it start the voice dial in "mute" mode... I have never experience in any other ROM I tried before. So far I have not yet found any solution. I need the BT device, because I am always on phone while doing other things.

same problem here, was working great on all the 6.0 roms but since 6.1 not working for me.. i hear no sound in the headset. i do see the headset icon on the dialer screen, but the button on the headset does nothing for me.. I am using the motorola h700 i believe.

[c.b]

UK TYTN II with Dutty's 6.1 rom works fine for me. Holding the BT button on headset launches voice dialler ( Schaps cyberon version) Double pressing the BT headset button dials last number. Single press on BT headest answers call when the phone rings.

[Penske MB]

Can you attack the CAb you use? I might have the older version of Cyberon.

Thanks

UK TYTN II with Dutty's 6.1 rom works fine for me. Holding the BT button on headset launches voice dialler ( Schaps cyberon version) Double pressing the BT headset button dials last number. Single press on BT headest answers call when the phone rings.

[P1Tater]

Can you attack the CAb you use? I might have the older version of Cyberon.

Thanks

do u mean this one.

[c.b]

The one I am using from Schaps can be found here http://forum.xda-developers.com/attachment.php?attachmentid=63977

[Penske MB]

Thanks guys,

Those are the 2 files I found last night, but did not have the chance to try them yet.

Cyberon voice command is almost 2MB and compare with Cyberon Voice Dialer 617k. What are the difference between these two??

[dave_a]

I have only just installed the new ROM and ran a few quick tests with the parrot minikit. It paired okay but then I had a few intermittent problems. Sometimes dialling from the phone would not automatically transfer to the minikit and sometimes I could not transfer a conversation from the phone to the minikit. Other times these worked okay. I did not try answering from the minikit as no-one called me while I was testing.

Only tried this once so will try again tonight and then try the bluetooth fixes and report back.

Using Radio 1.64.08.21 on Orange TyTN II and did the hard reset after installation.

Tried again tonight and still had the intermittent problems and once had the problem of it taking a few seconds to transfer from phone to headset.

Tried the bluetooth cabs but seemed to make things worse so then tried re-flashing dutty and the radio rom but still problems.

I then decided to try Sleuth's 6.1. Answering calls seemed to be fine but out of about 10 tries, making a call from the phone only got transferred to the minikit once.

Maybe it is the radio, maybe the minikit? Anyway, for now looks like I am going back to 6.0 :-(

[c.b]

It may be down to the headset you have not being 100% compatible with WM6.1 if there have been any changes to the BT hands free profile??? I honestly dont know if that is the case or not.

IIRC there are 2 BT standards v1.0 and v1.2. The device I have (plantronics voyager 510 is BT V1.2. Do you have a BT v.12 standard headset??

[dave_a]

It may be down to the headset you have not being 100% compatible with WM6.1 if there have been any changes to the BT hands free profile??? I honestly dont know if that is the case or not.

IIRC there are 2 BT standards v1.0 and v1.2. The device I have (plantronics voyager 510 is BT V1.2. Do you have a BT v.12 standard headset??

I suspect you might be right with compatibility issues. Just checked the manual and it is v1.2 . I have a plantronics 640 but unfortunately can't find the charger to test this out.

[kingofthething]

my bluetooth paired and seemed to work
i get no sound out of it when im making a call
i did first after the update then it stopped

now i cant even get sound out of the phone's speaker

updating radio now

[s_david]

I also some problem with my bluetooth for transfer the data from other devices. Pls adv

[AllTheWay]

I also some problem with my bluetooth for transfer the data from other devices. Pls adv

Try Dutty's newest ROM he just uploaded....see if you have the same issue.

[s_david]

Try Dutty's newest ROM he just uploaded....see if you have the same issue.

Which the newest dutty rom can solve the bluetooth problem? pls help me