[2/24 v1.5 NEW] nueLED - configure LEDS on any HTC device

[igloo]

Hi no2chem,

today I installed nueLED on my Kaiser. It runs very nice. I have two questions:

1. is it possible to change the frequency of the LED blinking? I would like to see the Bluetooth LED linking twise a second instead of every other second or even steady on ...

2. I have redirected signal LED (addr 8, mode 1) to Charge done (addr 22, mode 2) in order to have a steady green LED when signal coverage. This works great when a signal is available. As soon as I turn off my phone (flight mode) I would expect that the LED is off, same for leaving coverage. BUT the green LED is still steady on; it doesn't change the state. Any idea how to fix that?

Thanks a lot!!!

[teddyen66]

Hi there.

I have been trying this on my Diamond.
Some functions work, but saving new items wont work.
It creates a registry error.

Is there any chance of a version for the HTC Diamond?

I would like to see the possibility to enable a LED for GPS on/off :-)

[Jemradary]

Does this allow you to disable the lights?

I would like to disable all lights except charging.

Is this a .cab or does it have to be installed another way? The files I get a wierd and cant run on the Vogue mobile.

[wapvirus]

Can't find the download link also searched softpedia and it also links to a rom download

[Jemradary]

Can't find the download link also searched softpedia and it also links to a rom download

I was having the problem wapvirus, after an hour or so of research I came across this post where stroths at at ppcgeeks made a nice .cab for people like us.

http://forum.ppcgeeks.com/showpost.php?p=189618&postcount=20

[wapvirus]

Thanks man nice post:)

[twolf]

Thats strange, his site changed and no nueled inside... :(
Here are some mirrors:

Download mirror(37kb): http://rapidshare.de/files/40111294/no2che...ED_1.5.zip.html

[wapvirus]

Thanks to twolf ,i thought it was just me not finding the downloads on his site;)thanks for the links two

[VMackie]

After I installed the NUE led with the new verizon update to wm 6.1 the NUE led program had some issues. First the notification led only flashes for a missed call not a missed sms or mms message. Also the charge and charge done led will not disable. Anyone having same problem or a way to fix the software?

[azazelx]

How can i get the Bluetooth LED to stay on without flashing when i have a txt msg i havent read? And go off after i read it?

[robba8719]

Doesn't work on my Touch :(

[wmg76]

Very nice. Can't wait to give this a try!
Thanks...

[theartinc]

Has someone figured out how to control the 4 leds in the HTC Touch navigation pad? It would be nice if these could flash once every 10 seconds or something..

[BestAlways]

Hi!

Will this work on HTC P3400?

[spastico]

Is anyone using this with a Pro?

[BestAlways]

It does not work on my HTC P3400. Even the diagnostic mode doesn't work.

[irocknikes123]

cant get it to work on my htc touch.
someone help :confused:

[robba8719]

yeah help would be appreciated.

[Paradoxxx]

Where is the link?So hard to find it in the web site...Somebody can do a miroir?Thanks

[shahriar5252]

I put nueLED version 1.5 on my Sprint Mogul (HTC TyTnII PPC6800) running on wm6.1, and it works well. I had to manually find and add Address 4, Mode 4 to be able to disable the annoying red low battery warning LED as well.

One minor issue, I have tried to find and kill the address and mode for the orange colored non-blinking LED that indicates charging and the nonblinking green LED that indicates charge is complete. I have found the address and mode for the orange charging LED, but after a soft reset, this LED comes back.

Only other problem is the inability to delete it for diagnostic purposes. As now2chem's , this program cannot be deleted easily. As now2chem's dirreply in PPC Geeks indicatesections (http://forum.ppcgeeks.com/showthread.php?t=18871) in PPC Geeks, I tried to change the registry key for HKEY_LOCAL_MACHINE\Drivers\BuiltIn\AllLEDMgr
and change dword index value to "Index"=dword:1. Then, I also tried to delete registry key: HKEY_LOCAL_MACHINE\Drivers\BuiltIn\nueLED, but wm6.1 say access denied. Subsequently, wm6.1 could not remove the program. Hope you someone can fix this issue.

Thank you for your wonderful product. I was just so frustrated with those blinking LED, and my battery life increased to a great deal. Thank you.

[ippie]

Has anyone tried this on Touch 3G(Jade)?
I want the green led flashes when it's in stand-by mode badly!!!
Been looking lots of web sites n no solution has been found...
It seems this might be the one I've been looking for.

Is this a software to make any led light to blink?
Or it's a rom since I'm afraid all the installed programmes would be removed after this installation if it's a rom...

Please help...
:o

[ma3743]

hi
how can I change notification LED to red?

[ippie]

Has anyone tried this on Touch 3G(Jade)?
I want the green led flashes when it's in stand-by mode badly!!!
Been looking lots of web sites n no solution has been found...
It seems this might be the one I've been looking for.

Is this a software to make any led light to blink?
Or it's a rom since I'm afraid all the installed programmes would be removed after this installation if it's a rom...

Please help...
:o


I tried this but it didn't work on Jade...
:(

[AkumaX]

diagnose doesn't do anything :\ can someone post the mapping for all LED's on the mogul?

[shinakpas]

Too bad, no hope for Jade to make the network coverage blink....

[1234556789]

Super idea ! great App!
I tried it on Toch hd, but i can´t change it to blue.-
I selected it like the screenshot shows- but then the LED don´t works.
But i can change it to green.(charge done)
Where is (my?) foult?

kind regards
gandalf

[ebsbow]

Why not use the media player sound output to drive the LEDs.
Flashing to the sound of music. Start coding :)

[thenightbass]

Hello guys, please help I really dont understand how to do it!
I would like to set up my LED as follows:
-red blinking on missed call
-green blinking on new received message
-other LEDs to be default (or doesnt matter)

Any suggestions please?

[aZzz.bZzz]

how to make it work on touch pro 2 ?
there is no led on it that flashes red (only low battery notification, but it doesnt visible in nueLED)
maybe somebody can reconfigure AllLEDMgr.dll?

[newaje]

I put nueLED version 1.5 on my Sprint Mogul (HTC TyTnII PPC6800) running on wm6.1, and it works well. I had to manually find and add Address 4, Mode 4 to be able to disable the annoying red low battery warning LED as well.

One minor issue, I have tried to find and kill the address and mode for the orange colored non-blinking LED that indicates charging and the nonblinking green LED that indicates charge is complete. I have found the address and mode for the orange charging LED, but after a soft reset, this LED comes back.

Only other problem is the inability to delete it for diagnostic purposes. As now2chem's , this program cannot be deleted easily. As now2chem's dirreply in PPC Geeks indicatesections (http://forum.ppcgeeks.com/showthread.php?t=18871) in PPC Geeks, I tried to change the registry key for HKEY_LOCAL_MACHINE\Drivers\BuiltIn\AllLEDMgr
and change dword index value to "Index"=dword:1. Then, I also tried to delete registry key: HKEY_LOCAL_MACHINE\Drivers\BuiltIn\nueLED, but wm6.1 say access denied. Subsequently, wm6.1 could not remove the program. Hope you someone can fix this issue.

Thank you for your wonderful product. I was just so frustrated with those blinking LED, and my battery life increased to a great deal. Thank you.

I love NueLED, it came with Ryan's Rom for my XV6800. I have also tried installing the 1.5b version that's out there, which is build of 1005, and Ryan's Rom came with build 1006, I didn't notice any difference or results. My phone also does not keep the charging LED to stay off, sometimes it stays off for a few minutes and turns on again. Seems like some people are having success keeping the charging/complete amber and green light off full time in other forums. So maybe it has to do with whatever other software we have installed, or our Rom, I wonder. Hopefully there will be an update or solution posted in a forum, thanks No2Chem.

[dkreifus]

I'm wondering if this tool will help my problem. Out of nowhere my amber light turned on and stayed on. If I plugged it into a usb charger (wall or laptop), it turned red.
I left it on all night, and it turned green and stays on. Now it is a greenish/yellow light with a faint green status light blink every so often.

[mitsi]

Hi no2Chem,

This is a great program, but only partly works on my Topaz (Touch Diamond 2).

I would like my notifications to take priority over the charging LED. This means I would like the LED to blink even if it is charging. I have tried your program, but the only way to get my LED to blink during charging is to remove the charging/charged address. I can live with this, but would prefer to have the charging/charged LED but to blink on a notification if possible.

In addition, after a soft reset or after charging/removing/charging, the charging/charged LED's come back again.

Can you help me please?

[bluenote73]

Really not impressed with the level of not-giving-a-crap displayed by no2chem about uninstalling. Good job buddy.

[Sopis]

fomr what I read here this seems to be an awesome application but still needs a lot of dev and testing (sorry im not a developer)

anyway has anyone tried this on Blackstone?
id like to turn my LED to blue :)

[rajuabju]

Sorry to bring this back from the dead sorta.... but... anyone get this to work on their Touch Pro 2's?

I'd love to disable the stupid blinking green reception LED like I had done on my old Titan.

[rorytmeadows]

Sorry to bring this back from the dead sorta.... but... anyone get this to work on their Touch Pro 2's?

I'd love to disable the stupid blinking green reception LED like I had done on my old Titan.

+1, definitely for my TP2

[rjmjr69]

+1, definitely for my TP2


+2:p:p:p:p:p

[carhigh]

+2:p:p:p:p:p

+3 Disable new email led even though its all off already

[UncleBeer]

I wonder if this app might help solve the HD2 problem of not giving LED notification on new email. Not being a code monkey myself, I'd rather try the older version (GUI) to find out, but it's not available any more. :(

[sgou]

Really nice work !!!

As for the HD2:
It responds both and only on following LED nrs:
2: Home orange
4: Pickup Phone orange/green pulsing

[shahriar5252]

I wonder if this app might help solve the HD2 problem of not giving LED notification on new email. Not being a code monkey myself, I'd rather try the older version (GUI) to find out, but it's not available any more. :(



Enable/Disable LED Notification Setting in Sound and Notifications [with my changes for to make it work for Touch Pro2 but it should be good for HD2 as well.]

If you want to get the addresses for HTC HD2 just click the keys up and down in the same area of the registry, and look at what is specified. Or go to the link below for the original forum where I got the info from before I made modifications to their info to make it fit for Touch Pro2]


For Touch Pro2 running on stock ROM wm6.5 for Sprint:

Messaging: New Email Message
HKEY_CURRENT_USER\ControlPanel\Notifications\{A877 D65A-239C-47a7-9304-0D347F580408}]
“AvailableOptions”=dword: change to 15 (default is 11)

Messaging: New Text Message
HKEY_CURRENT_USER\ControlPanel\Notifications\{A877 D65B-239C-47a7-9304-0D347F580408}]
“AvailableOptions”=dword: change to 15 (default is 11)

Phone: Missed Call
HKEY_CURRENT_USER\ControlPanel\Notifications\{A877 D660-239C-47a7-9304-0D347F580408}]
“AvailableOptions”=dword: change to 15 (default is 11)

Phone: Voice Mail
HKEY_CURRENT_USER\ControlPanel\Notifications\{A877 D661-239C-47a7-9304-0D347F580408}]
“AvailableOptions”=dword: change to 15 (default is 11)

Messaging: New MMS
HKEY_CURRENT_USER\ControlPanel\Notifications\{C346 5585-39EF-4c9b-B2A3-5558BF27BFB0}]
“AvailableOptions”=dword: change to 15 (default is 11)

Soft reset. Go to Sounds and Notifications, and uncheck "Flash light for" for each item that you fixed above. "Flash light for" will no longer be grayed out.


Obtained from <http://pockethacks.com/category/tweaks-and-tricks/>



Does anyone know of any registry tweaks to disable the flashing red LED notification for low battery in Touch Pro2? I tried to disable it through the "Low battery warning" flash option in Sounds and Notifications menu of wm6, but that does not work. If you want to know how to enable "Low battery warning" in Sounds and Notifications menu, here are the instructions:

1. Search for the key HKEY_CURRENT_USER\ControlPanel\Notifications\{A877 D663-239C-47a7-9304-0D347F580408}\.

2. Create a new String value, name it Default and set its value to Low battery warning.

3. Now move to Start -> Settings -> Personal tab -> Sounds & Notifications applet -> Notifications tab, choose Low battery warning value from the Select an event drop-down menu and set whatever you want.


Pasted from <http://www.pdagold.com/forums/view_topic.asp?t=3691>

[delokaver]

i love this app,previously working like a charm in my previous phone, but now ..... not working with my new phone acer m900.

any solution ?

[Biges]

i love this app,previously working like a charm in my previous phone, but now ..... not working with my new phone acer m900.

any solution ?

Here also not working on M900 :(

[vsinha71]

does this work on xperia