T-Mobile Wing Flashing

[gigabit3]

Hello everyone. I'm new to the website and I'm very interested in flashing my T-Mobile Wing. I just have a quick question for you guys. Is there anyway to go back to factory default, pretty much put in back to its original out of the box state if i flash the phone? Also, will i still be able to use the My Faves or does that have nothing to do with this? Thanks for all the help and i look forward to learning more about this.

Gigabit

[7on]

Yes. You can download a T-Mobile Wing OEM RUU (search the forums for it) to get back to normal.

My Faves doesn't need the MyFaves app. I used MyFaves for about a year on my non-MyFaves Moto PEBL before getting the Wing. I just use Touch-IT 4.4 with the HTCHome plugin and just assign my myfaves numbers to the first 5 slots so 'simulate' the ease. I've always thought the MyFaves app was rather buggy, but there's a CAB floating around that you can install if you still want it. I just change my contacts via mytmobile online.

It's not too hard as long as you follow all the directions. Read them twice through if you have to.

[gigabit3]

thanks for the quick response. I just have one other question at this point. i've been look all over the place and cant seem to find what the newest version of Touch-It is. Can you please post a link to the newest version when every you have some time. I can't wait to get started.

Thanks! :)

Gig

[duprade]

These are the newest versions of Touch-IT.


NEW - Touch-IT v6.1.3 - Clean (updated with UC) (http://forum.xda-developers.com/showthread.php?t=369629)

Touch-IT wm6.1 19199.1.0.0 - Full (http://forum.xda-developers.com/showthread.php?t=365590)

Touch-IT wm6.1 19199.1.0.0 - ITsBlack (http://forum.xda-developers.com/showthread.php?t=365601)

Touch-IT v4.4 and 4.41 WWE P4350 (http://forum.xda-developers.com/showthread.php?t=358332)

There was a small problem with the wm6.1 versions where the MMS wasn't working correctly, and I'm not sure if that has been fixed... but ITJE's roms are awesome and you can't go wrong with them.

You'll need to install my keyboard fix
KEYBOARD FIX for WING / HERALD & ROM hardware keyboard (keybddr.dll) mismatch (http://forum.xda-developers.com/showthread.php?t=359696)

[gigabit3]

First off, Thank you so much for the fast responsces. Second, after a nice LONG day at the hospital with my daughter i sat down to start the flashing process. As i started reading some of the directions i saw something mentioned about Hard-SPL. My question to you guys is this: once i download the Touch version that i want, is that all i need? or do i need to look more into this and find Hard-SPL. please let me know whenever you have some time.

Thank You,


Gig

[duprade]

All you need to do is follow this link

http://forum.xda-developers.com/showthread.php?t=358225

HARDSPL is basically just flashing a rom.. so once youre done with it, all you have to do is install the Rom you want.

[gigabit3]

ok so, when i run Hard-SPL it starts to do its thing but stops at 4% and comes up with Update Error "Error 270". I've tried re-downloading the Hard-SPL file and uninstalled/reinstalled ActiveSync. I also installed all the .cab files in this order: canonyang, disablesecurity, asergpolicy, followed by a softrest. any ideas what the problem might be. Please let me know when you have some time. Thanks for all the help guys.


Gig

[PaNa-S]

Try restoring back to the default ROM that comes from the factory by downloading it from the first post here:

http://forum.xda-developers.com/showthread.php?t=321717

After that then try flashing with hard-spl and then to the new TouchIt.

By the way I recommend

Touch-IT wm6.1 19199.1.0.0 - Full

I have a T-mobile wing and that one works best for me. (of course you will have to run the keyboard fix cab and x-box cab as indicated in the previous posts after installing Touch-IT wm6)

[gigabit3]

i have yet to flash any ROM to the wing. it is still factory default. Should i still try to reinstall the new ROM using the link you provided? Thanks for all your help.

edit: after backing up all my crap i reinstalled the ROM using the RUU from the above post and everything went OK but I'm still getting the same Error when i try to run the Hard-SPL while in the bootloader screen i get "Error 270" at about the 2% mark. if i try to run the Hard-SPL while not in the bootloader screen i get "Error 202". please let me know if you have any other advice to get past this small issue.

Thanks,

Gig

[PaNa-S]

i have yet to flash any ROM to the wing. it is still factory default. Should i still try to reinstall the new ROM using the link you provided? Thanks for all your help.

edit: after backing up all my crap i reinstalled the ROM using the RUU from the above post and everything went OK but I'm still getting the same Error when i try to run the Hard-SPL while in the bootloader screen i get "Error 270" at about the 2% mark. if i try to run the Hard-SPL while not in the bootloader screen i get "Error 202". please let me know if you have any other advice to get past this small issue.

Thanks,

Gig

Are you sure you ran the 3 cab files first (inside of the Wing with your stylus) and then did the softreset on your Wing (by pressing the little button on the side of your wing with the tip of your stylus) prior to running the ROM exe file (on your large desktop PC)?

The 3 cabs should be run in the order that is given.

[gigabit3]

yes, after i installed the 3 .cab files i did a soft reset. I held the camera button and pushed in the reset button with the stylus. then once i was in the screen with the different colors i ran Hard-SPL from my desktop computer.

edit:

after reading what i was typing i tried it again and it worked. just call me stupid. SOFT REST! those two words will hunt me forever. Thanks for all your help. not its time to start blowing crap up. lol


Thanks a bunch

Gig

[duprade]

If I remember the instructions, you're supposed to run the hardspl when the phone is running WM.... so basically, install the 3 cabs, reset, wait for it to reach your today screen... connect to activesync, then run hardspl.

[gigabit3]

that is correct sir. Thats how i was reading it but then doing it a different way. i dunno what i was thinking. Thank you so much for all your help. i have successfully installed Hard-SPL and Touch 4.4 full. I also over clocked from 201 to 247 with no issues. Applied your keyboard fix and the mms fix along with the Internet fix. all is working perfect. thanks again for all the help. i'll definitely will be browsing the sit more to see what else i can learn.

Thanks,


Gig