PDA

View Full Version : Help!!! With Verizon XV6800


geotorres21
26th February 2008, 07:55 PM
I updated the bootloader and then the radio to 3.27 and it freezes at the White Verizon Screen? anyone experienced this? Any Resolutions?

760hacker
26th February 2008, 07:57 PM
You only updated the Radio? Not all Radio's and ROM's are compatible. That could be your problem.

geotorres21
26th February 2008, 07:59 PM
Is there any way to resolve the issue?

rmancl
26th February 2008, 08:00 PM
I updated the bootloader and then the radio to 3.27 and it freezes at the White Verizon Screen? anyone experienced this? Any Resolutions?

happens to everyone...restart to the bootloader screen,( i believe you hold down camera and power and push the reset button)

then run the rru to install your rom, i recommend one of dcds roms.

there are several threads with step by step instructions if you need further help.

zoomy942
26th February 2008, 08:01 PM
yes. flash to a newer ROM. with radio 3.27, try using DCD's 2.3.1 ROM.

geotorres21
26th February 2008, 08:03 PM
Its stuck at the white verizon screen when I try to do that its does not detect that the phone is conected via USB.

rmancl
26th February 2008, 08:07 PM
try removing usb wait a moment and put it back in

bedoig
26th February 2008, 08:08 PM
i believe you hold down camera and power and push the reset button

As stated above. Put your phone in bootloader mode first. Then flash one of the 3.16 based ROMS (essentially all of them these days: DCD, no2chem, NexVision, etc)

geotorres21
26th February 2008, 08:17 PM
I have downloaded the NEXVision Rom and was attemping to install that rom... How would i get back to bootloader mode?

bedoig
26th February 2008, 08:22 PM
happens to everyone...restart to the bootloader screen,( i believe you hold down camera and power and push the reset button)

Are you reading your own thread? J/K :)

Let us know if you need any more help.

geotorres21
26th February 2008, 09:21 PM
Yes I guess i just missed that one with all the important information... Oops..

But thatnks guys it works.. phone is operational again...