WM6.1 Charging issue on Brodit Car Holder

[hocqjn]

Hi all,

I've a Brodit car holder, and I've a strange issue...
With all 6.1 ROM's, all radio versions, when my Kaiser is in the Car holder, he start charging for about 5 min, then stop and the process flip all 5 min.
I don't have the problem with a 6.0 ROM...

Anybody have the same strange behavior ???

[URPREY]

I have a Brodit active holder with no issues. I'm using Dutty's 6.1 ROM.

[DeepThought]

I also have an active Brodit holder and no issues.

[jonteponte]

Hi all,

I've a Brodit car holder, and I've a strange issue...
With all 6.1 ROM's, all radio versions, when my Kaiser is in the Car holder, he start charging for about 5 min, then stop and the process flip all 5 min.
I don't have the problem with a 6.0 ROM...

Anybody have the same strange behavior ???

i have about the same error, just mine doesnt charge at all (duttys 6.1) its fine with my old tytn carcharger. iv tried my brodit charger with another kaiser with stock rom (swedish 6.0) and with that phone it charges just fine

im clueless

//jonte

[GSLEON3]

There are many issues that can affect charging. The biggest issue regarding charging with Automotive & PC USB I have seen are usually a result of a carelessly placed stylus during a soft reset attempt. Take a look at the USB port on your Kaiser. If it is slightly curved or lowered on the right side of port you are a victim of a poor design in location of the USB port.

I have had & seen several cases just like this, where the charge light will come on, but it won;'t charge & after a few moments the charge indicator light goes out. If your port pin is bent this can cause the auto chargers in paticular to fail while home chargers still function. If your USB port pin is indeed bent, & not broken, sometimes you can fix it by straightening it vey carefully with your stylus.

Also check to make sure the "Allow USB Charge" box is checked.

[hocqjn]

Hi Gsleon

I've check my USB port, and he is right in the middle...

But I find something...
Seems it's a bluethoot issue, as I use auto profile to start bluethoot when my tytn is powered without ActiveSync...
I've disable the auto profile, then no BT, and now, my kaiser start charging normally in the car.

Jonteponte, could you check if this is the same for you ?