PDA

View Full Version : I get to 0% when flashing then hangs

sanguy888
02-03-2008, 12:07 AM
When flashing a ROM on my 8925, I get to the point where it looks like it is about to load, but it stays at 0% and goes nowhere. I tried looking for a fix, but only found the White screen of death which is different from my problem.

Please HELP!

Thanks!
AllTheWay
02-03-2008, 12:14 AM
When flashing a ROM on my 8925, I get to the point where it looks like it is about to load, but it stays at 0% and goes nowhere. I tried looking for a fix, but only found the White screen of death which is different from my problem.

Please HELP!

Thanks!

Try flashing in bootloader.

Hold down Power button + Camera Button + insert stylus into reset.

Flash away.
asfoor
02-03-2008, 12:19 AM
When flashing a ROM on my 8925, I get to the point where it looks like it is about to load, but it stays at 0% and goes nowhere. I tried looking for a fix, but only found the White screen of death which is different from my problem.

Please HELP!

Thanks!

Do you see the upload meter on your PC or on both PC and Phone? If only on the PC, then you might not have the HardSPL flashed or installed, which you would need to do first before you can flash to a new ROM. If you see the load meter on both screens, phone and PC and it hangs, then do what Alltheway suggested.
sanguy888
02-03-2008, 12:22 AM
I tried that too. I have no problem getting to where it is about to load. It just won't load and stays at 0%.
sanguy888
02-03-2008, 12:23 AM
I get 0% on both PDA and PC.
asfoor
02-03-2008, 12:28 AM
I get 0% on both PDA and PC.

OK... Turn off your Fire wall and pause your Anti Virus program until the program loads to 100%.
asfoor
02-03-2008, 12:29 AM
Once more... Did you install the HardSPL?

Go here first if you have not installed the CID unlocker ( HardSPL)

http://forum.xda-developers.com/showthread.php?t=334679
sanguy888
02-03-2008, 12:37 AM
I tried loading HardSPL. I get the same problem when trying to load HardSPL. 0% progress. I'll try stopping my antivirus to see if that fixes things. I also have an 8525 in which I'm able to flash ROMs with no problems on the same computer. I suspect it is something with my 8925.
asfoor
02-03-2008, 12:57 AM
I tried loading HardSPL. I get the same problem when trying to load HardSPL. 0% progress. I'll try stopping my antivirus to see if that fixes things. I also have an 8525 in which I'm able to flash ROMs with no problems on the same computer. I suspect it is something with my 8925.

No it is not... The Qualcom processor behaves differently than the Samsung. So the loading environment one processor accepts is not necessary a common denominator.

Disable your Firewall and your AntiVirus and start fresh. Please read the HardSPL ( CID Unlocking) procedure carefully.
sanguy888
02-03-2008, 01:10 AM
Thanks for clarifying that asfoor! I'll give it a try.
sanguy888
02-03-2008, 01:38 AM
OK, I deinstalled my virus protection and turned off my firewall and still I get up to the point that a ROM (even for hardSPL) is about to load and nothing happens. :confused:
sanguy888
02-03-2008, 02:05 AM
I did a hard reset and it looks like it cleared the problem. I was able to flash the hardSPL...Thanks everyone!:)
asfoor
02-03-2008, 03:13 AM
I did a hard reset and it looks like it cleared the problem. I was able to flash the hardSPL...Thanks everyone!:)

You are on your way to become a ROM junkie :D .... like the rest of us... Congrats and glad to be of help.
my95z34
02-03-2008, 05:18 AM
I tried loading HardSPL. I get the same problem when trying to load HardSPL. 0% progress.

I have the same issue.. And none of that software is even installed on this machine. I've tried the hard reset too. Still nothing. Any ideas?
YLA G
02-03-2008, 11:36 AM
same here..

0% and then i get a recovery message on my vista pc to eject my battery.
asfoor
02-03-2008, 02:21 PM
I have the same issue.. And none of that software is even installed on this machine. I've tried the hard reset too. Still nothing. Any ideas?

HardSPL is NOT the same as Hard Reset ! Please read the thread on Unlocking your CID.
asfoor
02-03-2008, 02:23 PM
same here..

0% and then i get a recovery message on my vista pc to eject my battery.

You definitely have a Anti-Virus program that is conflicting with the install. I would try the install on another machine, then see if you get the same issue.
my95z34
02-03-2008, 04:01 PM
HardSPL is NOT the same as Hard Reset ! Please read the thread on Unlocking your CID.

... lol ... Yeah, I know. I know what I'm doing. Im not a rookie. I've been flashing phones for like 2 years now. I was saying that I've even hard reset'd the phone and tried on a fresh hard reset. To no avail.