T-Zones port forwarding ?

[tariq_niazi]

If using T-Zones services, you get access to only few ports. However, ports like SSL and FTP are blocked. Is it possible to use a personal proxy server to get access to all unblocked ports somehow? Just thinking of an idea.

- TKN

[PURESKILLZZZ]

If using T-Zones services, you get access to only few ports. However, ports like SSL and FTP are blocked. Is it possible to use a personal proxy server to get access to all unblocked ports somehow? Just thinking of an idea.

- TKN

Well mate if you are referring to using the t-zones as a free connection or hacking it then it was done and t-mobile during a big upgrade all but closed that gap. I myself have been trying for a loop hole through this as well because if they want to give me t-zones for free why not be able to utilize it fully . I do pay my cell bill every month .. lol

[drkmfdm]

Yes there is a way to do this.
And yes I have got this to work. Now I run skype, AIM, Remote Dektop, etc. from my T-zones EDGE connection. It is kind of slow though for things like Skype.

This is not intended to be easy, however if you spend enough time, you should be able to get it to work.
Here is the concept (For Windows XP),
Host an ssh server and a proxy server on your home computer.
I use copSSH for an ssh server (google it) and squid for windows for a proxy server (again google it and read the documentation!)

Set the ssh server to run on port 80 or port 143 (valid t-zones ports).
Set the proxy server to run on port 8118 (I just like that port number).
Use an ssh client on your windows mobile phone (such as pocketputty dev build 2007-02-28) (again, google).
Configure the ssh client to connect to your home ssh server via port 80 or 143
On the tunnel tab of pocketputty, add the ports you need to get to and direct them to localhost:portno

For example, Port 8118 is my proxy server so I have tunnelled port 8118 to localhost:8118

Now I manually connect to my EDGE T-Zones connection, I run pocketputty and connect to my home server. I then login with my user credentials to my ssh server and everything validates and I get a bash shell. Now I run Skype Mobile and change it's settings to connect using an https proxy of localhost with port 8118.

You can do this with any port, such as Remote Desktop (port 3389)
then you just open Remote Desktop client on your phone and connect to the the address localhost:3389 (or localhost)

I know this is a bit much but it's not exactly a point and click process for now, so only try this if you are pretty sure you know your way around ports, ssh, and tunneling. You could always read a lot about it online if you are not. That's what I did.

[aad4321]

jesus, it may be easier just to spend 20 a month for the internet lol, but thats sweet you figured that out

[breakx]

Yes there is a way to do this.
And yes I have got this to work. Now I run skype, AIM, Remote Dektop, etc. from my T-zones EDGE connection. It is kind of slow though for things like Skype.

This is not intended to be easy, however if you spend enough time, you should be able to get it to work.
Here is the concept (For Windows XP),
Host an ssh server and a proxy server on your home computer.
I use copSSH for an ssh server (google it) and squid for windows for a proxy server (again google it and read the documentation!)

Set the ssh server to run on port 80 or port 143 (valid t-zones ports).
Set the proxy server to run on port 8118 (I just like that port number).
Use an ssh client on your windows mobile phone (such as pocketputty dev build 2007-02-28) (again, google).
Configure the ssh client to connect to your home ssh server via port 80 or 143
On the tunnel tab of pocketputty, add the ports you need to get to and direct them to localhost:portno

For example, Port 8118 is my proxy server so I have tunnelled port 8118 to localhost:8118

Now I manually connect to my EDGE T-Zones connection, I run pocketputty and connect to my home server. I then login with my user credentials to my ssh server and everything validates and I get a bash shell. Now I run Skype Mobile and change it's settings to connect using an https proxy of localhost with port 8118.

You can do this with any port, such as Remote Desktop (port 3389)
then you just open Remote Desktop client on your phone and connect to the the address localhost:3389 (or localhost)

I know this is a bit much but it's not exactly a point and click process for now, so only try this if you are pretty sure you know your way around ports, ssh, and tunneling. You could always read a lot about it online if you are not. That's what I did.

It's relatively simple what you saying here ...but I can't understand what is the function of squid ...I don't know how you change the Skype(or other software like IM+, Agile messenger, Palringo, wmirc etc.) settings to connect using localhost port 8118 (or any other port).
Few month ago I tried something like this based on this tutorial http://forum.xda-developers.com/showthread.php?t=316890 ...but without succes :( ...

[deedee]

Yes there is a way to do this.
And yes I have got this to work. Now I run skype, AIM, Remote Dektop, etc. from my T-zones EDGE connection. It is kind of slow though for things like Skype.

This is not intended to be easy, however if you spend enough time, you should be able to get it to work.
Here is the concept (For Windows XP),
Host an ssh server and a proxy server on your home computer.
I use copSSH for an ssh server (google it) and squid for windows for a proxy server (again google it and read the documentation!)

Set the ssh server to run on port 80 or port 143 (valid t-zones ports).
Set the proxy server to run on port 8118 (I just like that port number).
Use an ssh client on your windows mobile phone (such as pocketputty dev build 2007-02-28) (again, google).
Configure the ssh client to connect to your home ssh server via port 80 or 143
On the tunnel tab of pocketputty, add the ports you need to get to and direct them to localhost:portno

For example, Port 8118 is my proxy server so I have tunnelled port 8118 to localhost:8118

Now I manually connect to my EDGE T-Zones connection, I run pocketputty and connect to my home server. I then login with my user credentials to my ssh server and everything validates and I get a bash shell. Now I run Skype Mobile and change it's settings to connect using an https proxy of localhost with port 8118.

You can do this with any port, such as Remote Desktop (port 3389)
then you just open Remote Desktop client on your phone and connect to the the address localhost:3389 (or localhost)

I know this is a bit much but it's not exactly a point and click process for now, so only try this if you are pretty sure you know your way around ports, ssh, and tunneling. You could always read a lot about it online if you are not. That's what I did.

One other advantage of doing it this way is that ll your activity goes down a secure encrypted tunnel and so is unsniffable.

[drkmfdm]

It's relatively simple what you saying here ...but I can't understand what is the function of squid ...I don't know how you change the Skype(or other software like IM+, Agile messenger, Palringo, wmirc etc.) settings to connect using localhost port 8118 (or any other port).
Few month ago I tried something like this based on this tutorial http://forum.xda-developers.com/showthread.php?t=316890 ...but without succes :( ...

Yes it takes a while and some resources to make this work but it can save you a lot on T-mobile's slow EDGE network.
Squid is a caching proxy which runs under linux, windows, etc. I use it to have complete encrypted web access that is cached and I use it for remote pc connections as well as windows mobile. You could also use Privoxy to have an ad and spyware filtering proxy. I do not use Squid for any other apps such as Skype or Remote Desktop.

The forum link you included is a great example of how to setup this type of connection and it's a much better description. I wish I had found it a while ago.

I can't speak for every application and its ability to select a port, however here is how Skype works. After installing Skype you have to first login to Skype using a normal internet connection such as through ActiveSync or WiFi. After Skype login completes, you open the options menu and fill in the proxy port number. Then you can disconnect and use the pocketputty method. Remote desktop is even easier, you just open a new connection and goto the address "localhost:portnumber".

[TTJB]

Way beyond me. I wish I understood because this sounds like exactly what I have been looking for.

[PURESKILLZZZ]

Yes there is a way to do this.
And yes I have got this to work. Now I run skype, AIM, Remote Dektop, etc. from my T-zones EDGE connection. It is kind of slow though for things like Skype.

This is not intended to be easy, however if you spend enough time, you should be able to get it to work.
Here is the concept (For Windows XP),
Host an ssh server and a proxy server on your home computer.
I use copSSH for an ssh server (google it) and squid for windows for a proxy server (again google it and read the documentation!)

Set the ssh server to run on port 80 or port 143 (valid t-zones ports).
Set the proxy server to run on port 8118 (I just like that port number).
Use an ssh client on your windows mobile phone (such as pocketputty dev build 2007-02-28) (again, google).
Configure the ssh client to connect to your home ssh server via port 80 or 143
On the tunnel tab of pocketputty, add the ports you need to get to and direct them to localhost:portno

For example, Port 8118 is my proxy server so I have tunnelled port 8118 to localhost:8118

Now I manually connect to my EDGE T-Zones connection, I run pocketputty and connect to my home server. I then login with my user credentials to my ssh server and everything validates and I get a bash shell. Now I run Skype Mobile and change it's settings to connect using an https proxy of localhost with port 8118.

You can do this with any port, such as Remote Desktop (port 3389)
then you just open Remote Desktop client on your phone and connect to the the address localhost:3389 (or localhost)

I know this is a bit much but it's not exactly a point and click process for now, so only try this if you are pretty sure you know your way around ports, ssh, and tunneling. You could always read a lot about it online if you are not. That's what I did.



Sounds wonderful ................

Now can you please add some pictures and make a sweet how-to . I am sure many on the site will be happy to see your work . And I for one an very interested in it.

[collins_]

i don't know what kind of application you use on your pocket. But if your applications (like skype, fetchmail ) are able to use a socket server, you can go through easily via restricted ports of your provider.
I installed a socks server listening on an opened port, so now i can use skype and read my mails via this server.

Socks server :
With linux install : "dante"
With XP I don't know, but you can use "socksproxy" for tests (found on xda (http://forum.xda-developers.com/archive/index.php/t-414389.html)...). Take care this software is not secure ( or intall a DMZ with a firewall)...