SCLPC++ 0.051 Configurator 2.0

[fisac71]

Hi,

Here a new version of SCLPC++ Configurator.

With this version you can:

- Modify graphically each page of cube (showing directly the selected page)
- For each button you can visually (pressing on the button) view the actual link and/or modify the link browsing on file system
- Make a backup (and restore) of yours configuration files. Configuration files will be zipped in a single file
- Change the labels of main and music buttons (and its positions)
- Preview the modification before save changes

[motisu]

Downloading now. Will report back ASAP :)

[bsw11]

Is there a utility or can you tell me how to:

Create a link to the bluetooth device app.

Create a link to toggle the wifi on and off.

Thanks,

Barry

[fisac71]

Is there a utility or can you tell me how to:

Create a link to the bluetooth device app.

Create a link to toggle the wifi on and off.

Thanks,

Barry

This is an utility to "only" modify a link without use a PC but directly from PDA.
Before save you can edit the file to add your "special" link.

[motisu]

Working OK on my Blue Angel, and much easier to use than the old configurator. Kudos on a nice utility. I just hope that it will also work on Slither's newer version, soon to come. The only thing even better would be if it could also rebuild the icons to match the programs that then run.

[AnnaW]

I get error message if i try to load program - Pic 1
Also can not save anything - Pic 2

Grammar correction
Erro = Error
rading = reading

[bsw11]

This is an utility to "only" modify a link without use a PC but directly from PDA.
Before save you can edit the file to add your "special" link.

I understand that I can edit the file :) - the problem is I don't know what to put in the file to make those functions actually work - that is what I was asking.

Your new version worked fine for me.

[deedee]

I get error message if i try to load program - Pic 1
Also can not save anything - Pic 2

Grammar correction
Erro = Error
rading = reading
Not tried this configurator yet, but if it's anything like the previous one, you need to make sure the cube is closed, and not just minimised, before changing the coonfig files.

[motisu]

Not tried this configurator yet, but if it's anything like the previous one, you need to make sure the cube is closed, and not just minimised, before changing the coonfig files.

I used the configurator while the cube was minimized and it worked OK, saving the new configuration. It doesn't kick in though until you restart the cube. I restart it with Task Manager by killing the process and restarting it.

[Slither2006]

Hi fisac71,

Thankyou for your new version! :D Keep up the great work!!! :)

[NiteStalker]

Nice job on the config tool, when I first started it, the label for Music2 had Music3 X/Y Position and Music3 X/Y was blank. Once I made the adjustments it held the values, so possible it was my config file.

Backup program errors out, ATT Tilt ROM 1.62.00.00 (minus the bloatware), maybe I'm missing some software? (I have MortScript installed)

Error creating backupfile An error message cannot be displayed because an optional resource assebly containing it cannot be found

Suggestion: On the images used for setting up, can you pull from the actual SCLPC directory, that way any skin/theme being used is displayed? (Though its not that difficult to change them yourself)

Thanks for building these tools, it does make SCLPC a little more idiot friendly :)

[fisac71]

I get error message if i try to load program - Pic 1
Also can not save anything - Pic 2

Grammar correction
Erro = Error
rading = reading

You must have SCLPC++ installed
This error is shown when the configurator try to load the .ini files (in /application Data/SCLPC++/Data/Ini Files)

are you sure to have installed SCLPC++ correctly ?

[fisac71]

I used the configurator while the cube was minimized and it worked OK, saving the new configuration. It doesn't kick in though until you restart the cube. I restart it with Task Manager by killing the process and restarting it.

It's right. After modification you need to restart the cube

to do that, you can simply hold the OK button (the cube will fade out) and re-launch it (note. When the cube starts will show the edgeLib evaluation message).

If you don't see the edge lib message then the cube is not re-started and you will not see you changes.

[perettigiuliano]

Hi,
i am trying configurator but... the graphics that i see are not actual
They are the originals.
I guess that displaying actual graphics will be cool

[fisac71]

Hi,
i am trying configurator but... the graphics that i see are not actual
They are the originals.
I guess that displaying actual graphics will be cool

In the next release the configurator will use the actual images.
I am waiting the SCLPC++ 0.052 to modify the configurator.

By

[perettigiuliano]

In the next release the configurator will use the actual images.
I am waiting the SCLPC++ 0.052 to modify the configurator.

By

Good one!
Thanx in advance...

P.S.: if you interested i have customized all the graphics with "Buuf Icons", you can find them at http://mattahan.deviantart.com

[kwill]

thanks so much for the config app. you have truly made it great and easy to use!!!

[udgn]

Tanks, downloading rrright away.

[M.MALKI]

Thanks... keep up the great job .

[emanuel-paul]

hi

is there a possibility to make the configurater work with a german phone?
i don't have the folder \windows\startmenu. in german it is \windows\start menü
with this path, the configurator don't works.

thanks
emanuel

[vrc005]

I am getting an AT&T Tilt tomorrow. Is the SCLPC++0.051 Configuator 2.0 something I should even attempt to install. And if so, how do I install it. Also what exactly does the configuator do?

[lifeisfun]

read page one

[Cheese_king]

hello, can someone tell me what im doing wrong? when i start t he configurator and choose the Apllications and press the calculater and change the link then i get this error messages "does not find \windows\start menu. check the path and filename is correct". if i then press ok, and find the calc.ink file and press save and exit it doesnt work in sclpc++

does it have anything to do that my language is norwegian??

[fisac71]

Maybe,

The dialog open directly to Windows\Start Menu, (to avoid user to navigate in folders) if you language is different you can have this error.

but if the path is correct, i don't know.

[dturbo]

I have an error poping up when i try to change my apps. unexpected error:
'Filedialog, Version=1.1.1.21984, Culture=neutral, publickey token-null', or one of its dependences was not found

On my cube the photos and video apps work but not audio manager, and the third cube with all the apps as well. Please help.

Thanks in advance.

[dturbo]

I have an error poping up when i try to change my apps. unexpected error:
'Filedialog, Version=1.1.1.21984, Culture=neutral, publickey token-null', or one of its dependences was not found

On my cube the photos and video apps work but not audio manager, and the third cube with all the apps as well. Please help.

Thanks in advance.

Edit: Fix that problem, did not complete installing the cab. But my audiomanager still does not seem to work. Any help?

[dturbo]

restarted cube by holding ok. everything ok. just thought i'd repost.

cheers

[!Kernel Panic!]

Holding the OK button does not work for me....any other way to restart the cube without having to bring up task manager?

[fisac71]

Holding the OK button does not work for me....any other way to restart the cube without having to bring up task manager?

Uhmm, are you sure ?
In this case you have to use task manager.

bye