Onyx

[grzegorz10]

This Theme has been built for ease of use and for all relevant Information always on view.
It is made up of Skins for:

Wisbar Adv3
Wisbar Advance Desktop
Tsk theme
Phone Dialler ( has all features included,smart dialling picture ID, etc)
Calculator
WMP
SPB Time
S2U2 ( skinned both clock sets )

It should be noted that any non generic calculators or phones should be uninstalled before applying these new ones and a soft reset after installation.

For a closer look go to

http://www.pocket-pc-visuals.com/OnyxP.jpg


All Downloads are at these url's

http://www.pocket-pc-visuals.com/Onyx.rar

http://www.pocket-pc-visuals.com/OnyxPhoneDialer.CAB

http://www.pocket-pc-visuals.com/OnyxS2U2.rar

http://www.pocket-pc-visuals.com/OnyxTime.rar

[bridic]

looks good.
Going to give some a try.

Edit: Can you convert your 2007 word document to a earlier release. I dont have Office 2007...yet.

[grzegorz10]

looks good.
Going to give some a try.

Edit: Can you convert your 2007 word document to a earlier release. I dont have Office 2007...yet.
I didn't even think about that anyway here is the Text you need

[GiZZy]

GJ, looks pretty good ;)

[bridic]

I didn't even think about that anyway here is the Text you need

Thanks, can you re-post the S2U2 instructions also.

[grzegorz10]

Thanks, can you re-post the S2U2 instructions also.
Sure not a problem just had to make them up

[mcfarlan]

Hey George,

Finally got my Tilt so I am in this forum now. WAD is locking up my device. WA3 is OK but once I start navigating through the pages in WAD, within two minutes I have to SR. Didn't want to do a clean install but may have to and let you know if the problem is still there.

Rgds

[grzegorz10]

Hey George,

Finally got my Tilt so I am in this forum now. WAD is locking up my device. WA3 is OK but once I start navigating through the pages in WAD, within two minutes I have to SR. Didn't want to do a clean install but may have to and let you know if the problem is still there.

Rgds
Hi to you to. I don't know if this is the problem but with the meter for storage car I've found that if you pull the storage card out it will throw WAD , so i just shut off if i need to remove the storage card. Other than that a rellocatin of that meter to read something else may be needed

[grzegorz10]

GJ, looks pretty good ;)
Tks for the words

[ancola66]

Very nice Thankssssssssssssss:). Can you psShutXP Skin make add more?
Sorry for my English

[grzegorz10]

Very nice Thankssssssssssssss:). Can you psShutXP Skin make add more?
Sorry for my English
Im not sure what you mean but this is not a psShutXP Skin. It's part of the WAD and is a proper Shutdown, Logoff and Soft Reset with button animation
something that can't be done in psShutXP, it's only a stagnet picture where this is not.

[mcfarlan]

Im not sure what you mean but this is not a psShutXP Skin. It's part of the WAD and is a proper Shutdown, Logoff and Soft Reset with button animation
something that can't be done in psShutXP, it's only a stagnet picture where this is not.


Hi Gregory,

Is there a specific way to Cancel out of this? Sometimes I can get out of it but most times I have to turn off and turn back on. I think a Cancel option would be nice here...

[grzegorz10]

Hi Gregory,

Is there a specific way to Cancel out of this? Sometimes I can get out of it but most times I have to turn off and turn back on. I think a Cancel option would be nice here...
if your talking about the logoff page there is a cancel at the bottom

[ancola66]

Im not sure what you mean but this is not a psShutXP Skin. It's part of the WAD and is a proper Shutdown, Logoff and Soft Reset with button animation
something that can't be done in psShutXP, it's only a stagnet picture where this is not.
I know, but I not use WA3 and WAD:). I Want psShutXP Skin ( I use Canculator Skin, Dialpad Skin, SpbTime Skin and S2U2 Skin:) )

[grzegorz10]

I know, but I not use WA3 and WAD:). I Want psShutXP Skin ( I use Canculator Skin, Dialpad Skin, SpbTime Skin and S2U2 Skin:) )
Sorry I won't be making this psShutXP skin, theres just nothing to them.

[monamibouli]

good job !

but when I tap on "menu", nothing happen ... I can't see the other pages !

[grzegorz10]

good job !

but when I tap on "menu", nothing happen ... I can't see the other pages !

Press and hold on menu then select properties, under Action should be Toggle Dock and under Control it should be Menu. If thats all as it should be, then have you put the folders as i instructed, both as they are into Themes/Desktop/ if you've put them any where else it would not work.
Let me know how you go as i really did make this as easy to put on and work as i could do

[abumhmmd1]

all N 1 file
http://www.4shared.com/file/40219243/26f10b6e/Onyx.html

[jakkrith]

Thank you very much for your good job I like this thems so much

[grzegorz10]

Thank you very much for your good job I like this thems so much
I'm Glad you like it so much it was built to be as user friendly as possible

[grzegorz10]

all N 1 file
http://www.4shared.com/file/40219243/26f10b6e/Onyx.html


Abumhmmd1: I appreciate the help in getting my theme out there, and have been to the site you have the link on and would only ask that in future you credit my work in your postings.

If you know the other person who also has a link thru yahoo.com on that site, if you could pass on the same message to him/her, it would be very much appreciated.

grzegorz10 ~~ Thank you.:)

[abumhmmd1]

Abumhmmd1: I appreciate the help in getting my theme out there, and have been to the site you have the link on and would only ask that in future you credit my work in your postings.
If you know the other person who also has a link thru yahoo.com on that site, if you could pass on the same message to him/her, it would be very much appreciated.
grzegorz10 ~~ Thank you.:)

unfotionatly >> NO
BT, any way , U can e-maile him !

[monamibouli]

Press and hold on menu then select properties, under Action should be Toggle Dock and under Control it should be Menu. If thats all as it should be, then have you put the folders as i instructed, both as they are into Themes/Desktop/ if you've put them any where else it would not work.
Let me know how you go as i really did make this as easy to put on and work as i could do

ok thks, can you tell me where I must put all the folder and files ? on storage card ? does it work with WA2 ? which version have you test it ?

[grzegorz10]

ok thks, can you tell me where I must put all the folder and files ? on storage card ? does it work with WA2 ? which version have you test it ?
Instructions were loaded in with the files. If you can't open up those instructions I have posted for another member in this thread instructions in a format that can be rea,d for those who don't have word 2007. The wisbar is for WA3 so you'll need that
and it's been tested on Mobile5 and Mobil6

[Baonc]

This Theme has been built for ease of use and for all relevant Information always on view.
It is made up of Skins for:

Wisbar Adv3
Wisbar Advance Desktop
Tsk theme
Phone Dialler ( has all features included,smart dialling picture ID, etc)
Calculator
WMP
SPB Time
S2U2 ( skinned both clock sets )

It should be noted that any non generic calculators or phones should be uninstalled before applying these new ones and a soft reset after installation.

For a closer look go to

http://www.pocket-pc-visuals.com/OnyxP.jpg


All Downloads are at these url's

http://www.pocket-pc-visuals.com/Onyx.rar

http://www.pocket-pc-visuals.com/OnyxPhoneDialer.CAB

http://www.pocket-pc-visuals.com/OnyxS2U2.rar

http://www.pocket-pc-visuals.com/OnyxTime.rar

But Phone Dialler don't support Unicode. is that right?

[grzegorz10]

But Phone Dialler don't support Unicode. is that right?
Thats a new one for me can you explain what the unicode is

[grzegorz10]

But Phone Dialler don't support Unicode. is that right?
Thats a new one for me can you explain what unicode is.

[tieumi]

Could you mind to explain more for installation of WAD? In your instructions, Onyx Landscape and Portrait folders need to be placed in Themes/Desktop/ but I can't find path Themes/Desktop/ in my PPC. Thanks.

[grzegorz10]

Could you mind to explain more for installation of WAD? In your instructions, Onyx Landscape and Portrait folders need to be placed in Themes/Desktop/ but I can't find path Themes/Desktop/ in my PPC. Thanks.
Yes not a problem. I ass ume you have Wisbar Advance Desktop program as you will need this. If you go into your mobile through file Explorer, if your not already there go to my device and that will display a set fo folders amongst those you will find Themes,press on that then on Desktop and this is where you place the two Onyx folders. Once you have done this you will find that they will be listed now in your Theme Manager.

[tieumi]

I opened My device through Explorer but still can't find the path Themes/Desktop (as my attached image). Looking for your help.

[mcfarlan]

I opened My device through Explorer but still can't find the path Themes/Desktop (as my attached image). Looking for your help.

Have you installed Wisbar Advance Desktop? It creates the folders you are looking for automatically and places the default themes in them.

[tieumi]

I misunderstand that Wisbar Advance and Wisbar Advance Desktop are one program. After installation WAD, everything is ok.

[iceaxe07]

From the instruction,

I placed "Onyx Portrait" and "Onyx Landscape" in Themes/Desktop/
but when i go into Theme Manager, i didn't see these two option.
So i install them like the way i install for Wisbar, when i install it only appear as WisBar 2.x Skins.

After that i launch my WAD and Wisbar Advance. All i get to see is blank just blue screen.

Did i miss out or mess up the steps???

[grzegorz10]

From the instruction,

I placed "Onyx Portrait" and "Onyx Landscape" in Themes/Desktop/
but when i go into Theme Manager, i didn't see these two option.
So i install them like the way i install for Wisbar, when i install it only appear as WisBar 2.x Skins.

After that i launch my WAD and Wisbar Advance. All i get to see is blank just blue screen.

Did i miss out or mess up the steps???Firstly I will assume you have Wisbar Advance Desktop as well as Wisbar Adv3 as you will need both of these programs. The first parts correct as you did it. There is no installation for these two folders just place them as per instructions. Under Theme Manager in Desktop Themes you will find the new theme just select it from there.
The only thing you need to be aware of is that when you put Wisbar programs on originally Advnce Desktop needed to go on first

[denttarek]

i have to say that is so slick i love it man.but i have a question i have been trying to replace the big clock on the first page with spb insight and the meters with resco home and then add phone alarm at the bottom my problem whenever i add them the over lap on all pages hpw can i get them to stick to the first page only,thanks in advance

[grzegorz10]

i have to say that is so slick i love it man.but i have a question i have been trying to replace the big clock on the first page with spb insight and the meters with resco home and then add phone alarm at the bottom my problem whenever i add them the over lap on all pages hpw can i get them to stick to the first page only,thanks in advance
Should be an easy fix. Press on the menu pages on a blank space till a pop up menu shows, select bring to front and that should fix the problem. You will need to do this for all ovelaped pages. If this does not fix this then you may have pinned your plugins and that is why also they are showing elsewhere.Just unpin them.

hope this helps

[Corpsegrinder]

Just to bump this theme and say thanks for the hard work. I'm lovin it!:D