plz help me, stuck in bootloader

[micgrob]

when i power up i het the tri-color screen

upper right says : RUUNBH

n the rest says:

KAIS1*0
SPL-1.56.0000
CPLD-8

[sphinx88]

i am NO Expert, but can you try and load a new ROM? Or back to the AT&T rom?

[Isaygarcia]

1.- Hard SPL

2.- Flash another ROM

***********

if it doesnt work.

Try flashing the original stock ROM

and then flash the Hard SPL

[GSLEON3]

Don't do any of that until you know why. Get MTTY & folow MY instructions.

1. Disable A/S USB Connections (DO NOT KILL RAPI or A/S)
2. Run MTTY 1.42 & with your device in BL (Tri-Color) slect the USB port, change the flow control to RTS/CTS & select OK or the USB Button.
3. Hit the enter key on your KB until you see this: cmd>
4. Enter this exactly & only this: info 8 (It should look like this (cmd>info 8) mind the space between info & the number 8.
5. Post or PM me the resuslts reported on the MTTY screen.

From there I can tell you why you're stuck & how to possibly fix it. Never try force flashing another ROM. If you have bad blocks it can make things worse!

If you need help you can PM me or find me on MSN IM (gsleon3@hotmail.com)

[faruqsavar]

i have got my one like this

Cmd>info 8

--- 2K bytes sector version ---

DEVICE NAME=samsung_k9k2g08
DEVICE ID=0xAA
DEVICE MAKER ID=0xEC
PAGE SIZE=0x800
TOTAL PAGE SIZE=0x840
BLOCK COUNT=0x800
BLOCK PAGE=0x40

Checking block information

BLOCK 0 (0x0) is reversed block
BLOCK 1 (0x1) is reversed block
BLOCK 2 (0x2) is reversed block
BLOCK 8 (0x8) is reversed block
BLOCK 9 (0x9) is reversed block
BLOCK 10 (0xA) is reversed block
BLOCK 11 (0xB) is reversed block
BLOCK 1494 (0x5D6) is bad block
Partition[0], type=0x20, start=0x2, total=0x63E
Partition[1], type=0x23, start=0x640, total=0x700
Partition[2], type=0x25, start=0xD40, total=0x8B40
Partition[3], type=0x4, start=0x9880, total=0x11A40

CE Total Length(with sector info) = 0x4C8C400
CE CheckSum Length(without sector info) = 0x4C40000

Cmd>



Don't do any of that until you know why. Get MTTY & folow MY instructions.

1. Disable A/S USB Connections (DO NOT KILL RAPI or A/S)
2. Run MTTY 1.42 & with your device in BL (Tri-Color) slect the USB port, change the flow control to RTS/CTS & select OK or the USB Button.
3. Hit the enter key on your KB until you see this: cmd>
4. Enter this exactly & only this: info 8 (It should look like this (cmd>info 8) mind the space between info & the number 8.
5. Post or PM me the resuslts reported on the MTTY screen.

From there I can tell you why you're stuck & how to possibly fix it. Never try force flashing another ROM. If you have bad blocks it can make things worse!

If you need help you can PM me or find me on MSN IM (gsleon3@hotmail.com)

[GSLEON3]

Sorry I missed you guy.

I need to know what SPL version you have though.

If you have HardSPL (or 1.52 or 1.56) you want to do this:
cmd>set 16 0
cmd>boot

That should probably clear the bad block. You may have to repeat the step twice.

i have got my one like this

Cmd>info 8

--- 2K bytes sector version ---

DEVICE NAME=samsung_k9k2g08
DEVICE ID=0xAA
DEVICE MAKER ID=0xEC
PAGE SIZE=0x800
TOTAL PAGE SIZE=0x840
BLOCK COUNT=0x800
BLOCK PAGE=0x40

Checking block information

BLOCK 0 (0x0) is reversed block
BLOCK 1 (0x1) is reversed block
BLOCK 2 (0x2) is reversed block
BLOCK 8 (0x8) is reversed block
BLOCK 9 (0x9) is reversed block
BLOCK 10 (0xA) is reversed block
BLOCK 11 (0xB) is reversed block
BLOCK 1494 (0x5D6) is bad block
Partition[0], type=0x20, start=0x2, total=0x63E
Partition[1], type=0x23, start=0x640, total=0x700
Partition[2], type=0x25, start=0xD40, total=0x8B40
Partition[3], type=0x4, start=0x9880, total=0x11A40

CE Total Length(with sector info) = 0x4C8C400
CE CheckSum Length(without sector info) = 0x4C40000

Cmd>

[faruqsavar]

Sorry I missed you guy.


If you have HardSPL (or 1.52 or 1.56) you want to do this:
cmd>set 16 0
cmd>boot

That should probably clear the bad block. You may have to repeat the step twice.



SPL 1.81.0000
CPLD 8
How do i clear the bad block thank you