My prophet doesnt recognize the battery

[G40]

my prophet cant recognize the battery ....i can turn on the device sometimes and when i go to seetings\battery\it's 0% i have alredy try other batteries that are fine in other devices ....i try to flash the rom but the update utility cant recognize the battey and dont let me flash it help please....


oh god i am so new and fresh...so many problems with my prophet help me guys

[G40]

no one can give me the drivers for the battery !!!!

i cant find it .....i think that is the solution


please help me

[wanwarlock]

maybe get a new battery? AFAIK, there are no drivers for batteries

[G40]

maybe get a new battery? AFAIK, there are no drivers for batteries



i have alredy try other batteries that are fine in other devices


the device dosent have the right drivers for the prophet because the rom get an error while flashing

[l3v5y]

Have you flashed a ROM before?
If the battery is not working in your device, try checking the connections. There are no 'drivers' for the battery, I can flash a ROM in bootloader after flashing a ROM with nothing in it, which means that the RUU is using the hardware rather than software to determine the battery status.

[G40]

i cant flash again the pro+het because the update utility verify the battery status and then give an error because the prophet doesnt have more than 50 of battery . . . help please:confused:

[Dani3d]

My prophet had the same issue in the past weeks.
I had to restart several times until the phone recognize the batery.

The issue is not only at the OS level because even with the phone turned off it was not able to charge (you can see because of the orange lid).

Sometimes the phone just stoped recognizing the batery and the charge value just stops decreasing.

My guess is that this is related to some ROM's i've been testing, have you switched ROM in the past weeks?

Last night i started using iProphet 1.0.2.3 (sounds familiar? l3v5y) and until now i'm not having problems. (Just appears to consume a lot of batery but ill confirm this in the next days).

[l3v5y]

The battery drain may be because of the camera. but you can remove it if you want. (it is an installed app)

I think the issue is to do with the hardware, and so upgrading the software will not help. If your charging circuit is damaged, the battery will not be detected. If the device is under warranty, I would suggest getting it repaired...

[l3v5y]

I've just been looking at the Universal Wiki and I may have a solution:
Solution 3: Recalibrate the battery (2)


Charge the battery overnight with the supplied poweradapter, not with the USB cable
Drain the battery without SD-card, powersaving off and backlight on full
At some level, the device will turn off. Switch it on and go to the bootloader and drain the battery until it's really empty
Charge the battery again with the supplied poweradapterThe idea of this is to completely discharge and then recharge the battery, so that the battery status monitoring system in the battery is reset.

[igord]

I had a same prob, tested with new battery problem continues...

[coolb4all]

Hi All,

After installing Prophet_G3_G4_RadioRom_v2.69.21.exe onto my QTEK S200 it's completely dead. I cannot start it up anymore, even with the battery connected to power. The orange charging light doesn't even go on. I don't get anything here, no QTEK screen, no boot, no nothing even after pressing the button for several seconds.

Anybody knows what happened? Is my battery dead? When I connect the QTEK to the power supply without the battery inserted, the light flashes red for a short second and then... nothing... The battery was almost fully charged when I started the upgrade. IPL was at 2.20.

euh... help!!!

I've already opened a thread for this but anyway... help help

[Dani3d]

I'm afraid i cannot help you much...
When that happend to me i just made several resets and tryed to start charging until it worked.
After that i've changed the ROM i was using and my batery seems to work better now. Sometimes if i overclock it stop's getting the correct batery values but never stop charging like it used to.

Try charging with diferent methods, a couple of times i was trying to charge with the standart (power line) cable and only worked if i used usb connected to my pc. Maybe a different voltage worked... i'm not sure.

Best of luck

[krisna_pandawa]

Hi mate...

i have the same problem tooo..
but this is because i have flashed my dopod 818pro..
i use CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE...
i can go to bootloader screen and go to the windows but i have to attached the prophet to the charger, because it will go death if just in battery mode..

please help me...
thank you...