PDA

View Full Version : Big storage on Gene


orefkov
13th March 2008, 09:04 AM
Small soft-pack for removing free space from Gene ROM, make lzx compressing ROM and set Extrom size to 2MB (extrom will be cleared).
After use it and flashing new ROM, you will have 65-70 MB of user storage.
Use it on own risk.

Usage:
1. Unzip this archive to one folder (for example c:\lzx).
2. Put file ruu_signed.nbh from your ROM in this folder too.
3. Run make_lzx.cmd
After it work about 5 min, and you will have new ROM as file GENEIMG.nbh in this folder.

Flashing:

This ROM cant be flashing throught RUU.

You must flash it from SD-Card.

On your device must be HARD-SPL installed !!!

Format SD-Card as FAT32.
Put GENEIMG.nbh on SD-CARD.
Charge your device at 100%!
Insert SD-Card in Gene, press AND HOLD "Camera" button, and do soft-reset.
If you see white screen with "Reading SD content":
Release "Camera" button, wait, and when countdown in left-bottom corner of screen is appear, press "Power" button. Flashing is begin, and approx. 5 min long. After you will see "Success. Press any key". Do soft-reset. Congratulation.

But if you see 3-color screen, then you mast do magic with your SD-Card.
See http://forum.xda-developers.com/showthread.php?t=371147

Good luck!

Cant upload file to this forum.
Download from http://www.filefactory.com/file/8f6656/

mobix
13th March 2008, 04:40 PM
thanks orefkov .. will give it a shot tonite.

NJackal
13th March 2008, 09:07 PM
hmmmm will try it tonight

NJackal
13th March 2008, 09:54 PM
orefkov i am getting this error bro .........

orefkov
13th March 2008, 10:36 PM
orefkov i am getting this error bro .........
try unpack archive closer to root folder, ie c:\lzx
Or try it on WinXP.

rexypow
13th March 2008, 10:50 PM
i have successfully flash the rom with this tool, after that i soft reset, device automatically boot into windows mobile 6.1, runs all the basic setup (screen align, date setup), then it automatically load some setup, after setup, device automatically reset..... PROBLEM start here, it stop at the first screen, refuse to boot into windows... i hard reset, soft reset, still the same, anything wrong?

orefkov
14th March 2008, 07:54 AM
try press power button some times, or reinsert the battery.

NJackal
14th March 2008, 08:24 AM
orefkov i am getting this error bro .........

hmmmm no change getting the same error again :( ............. and i am using xp only bro it is a vista theme only :D ..........

spmohapatra
16th March 2008, 10:04 PM
orefkov i am getting this error bro .........

Have you tried appending the temp folder's path in CMD? The process cannot find the file - so appending the path might help. Also, the batch file doesn't seem to recognise long filenames. That could be the reason the files inside your desktop can't be found.

gbnew
22nd March 2008, 05:14 PM
I create GENEIMG.nbh from a wm6.1's nbh file by your tool and flash it successfully. But it stop at the first screen, refuse to boot into windows... i hard reset, soft reset, still the same, anything wrong? Thanks a lot!

orefkov
24th March 2008, 11:12 AM
That work unstable on 6.1
Try on 6.0
Or try with that xip.

gbnew
25th March 2008, 05:53 AM
That work unstable on 6.1
Try on 6.0
Or try with that xip.

Thanks a lot! I'll try that again by your new Xip and report the result.

gbnew
26th March 2008, 06:05 PM
Hello, orefkov:
I try your new xip, but it has the same problem.
I'm using is not a official rom but a chinese version with core 19199. What I can do? Thanks!

saikumar
15th September 2011, 07:23 PM
then you mast do magic with your SD-Card.

what is the magic??
I dint get u..

mr.harsh
16th September 2011, 02:50 PM
Every ROM cant be flashed from SD card.You must make it to boot from SD card.Also make sure that you have formatted SD card in FAT32 and proper chunk size.