View Full Version : Bricked Advantage?- RESOLVED- PLEASE READ- GOOD INFO FOR UNLOCKING X7501!
THEQUARTZGUY
14th March 2008, 01:36 PM
HEY ALL,
I AM A FAIRLY EXPERIENCED USER WITH WM DEVICES, IN FACT I HAVE PUT TOGETHER SOME DECENT ROMS FOR THE KAISER, BUT I AM PRETTY NEW TO THE ADVANTAGE AS I JUST PICKED ONE UP LAST WEEK. PLEASE EXCUSE MY IGNORANCE IN THIS ISSUE, AS IT SEEMS JUST AN ISSUE OF ME MAKING AN EXTREMELY "ROOKIE" MISTAKE.
I HAVE READ, READ, READ AND READ SOME MORE, AS ONE SHOULD ALWAYS DO, BUT SOME HOW I GOT MYSELF INTO SOME TROUBLE WHILE RUNNING THE ATHENA UNLOCKER ON MY ADVANTAGE X7501... BIG TROUBLE...
I RAN THE UNLOCKER, AND FELT PRETTY COMFORTABLE WITH THE PROCESS, BUT WHILE THE UNLOCKER WAS RUNNING, AFTER IT ALLOOWED ME TO BACK UP MY SPL, IT WAS RUNNING SCRIPTS AS USUAL, AND I RECIVED AN UNUSUAL WINDOWS ERROR WITH THE UNLOCKER APP (PROGRAMS HAS EXPERIENCED ABNORMAL ACTIVITY OR SOMETHING TO THAT EFFECT...) THEN GAVE ME THE OPTION TO CONTINUE OR QUIT, SO I CHOSE CONTINUE, BUT THE DEVICE DID NOTHING MORE AND THE UNLOCKER BASICALLY FROZE. THE PC WAS "OK", AS FAR AS NOT BEING FROZE UP, BUT THE UNLOCKER WOULD NOT MOVE ANOTHER STEP! AFTER WAITING NEARLY AN HOUR, I DECIDED TO DISCONNECT (BAD IDEA, I SHOULD HAVE KNOWN BETTER, I REALIZE THIS PROBLEM IS BY ALL MEANS MY OWN FAULT!).
AFTER DISCNNECT, DEVICE APPEARED FINE UNTIL FIRST SOFT RESET, THEN I GOT NO BOOT, NO BOOTLOADER WITH ANY KEY COMBINATION, AND NOTHING ELSE. I CAN GET DEVICE TO WHAT WOULD NORMALLY BE THE STANDARD BL SCREEN, BUT NO OLIPRO SPL, NO WRITING AT ALL, AND NO SERIAL OR USB WHEN CONNECTED OR DISCONNECTED FROM PC! ALL I HAVE IS TRI-COLOR SCREEN WITH NO WRITING, REGARDLESS OF KEY/RESET COMBINATIONS THAT I HAVE TRIED, WHICH I BELIEVE ARE ALL OF THEM!
I AM OUT OF OPTIONS, I WAS HOPING SOME OF MY FELLOW XDA FOLKS COULD HELP AN "IDIOT" IN NEED! I WOULD CERTAINLY APPRECIATE IT ! :o
ALSO I WOULD GLADLY PROVIDE ANY MORE INFO IF NEEDED FOR FURHTER ADVICE. THANKS IN ADVANCE.
Hey All,
Thanks For All Of Your Helpful Advice, Unfortunately, I Think Im In A Little Deeper Than That
Bairda(Alex), I Looked At Your Screen Shots From Your Post, And Yea!!! That Is Exactly What My Device Looks Like!!! I Can Load The Bootloader, But Tricolor Only!!!! No Letters/ Version Numbers/ Anything!!!! I Really Dont Know What Else To Try, As I Know How To Flash A Rom From The Storage Card, But I Cannot Even Get The Bootloader To Load Properly!!! Any Advice Alex- Or Anyone Else?
Again, Got Disconnected After Having Issue With 3 Step Unlocker, After 1st Soft Reset, No Boot/ No Os/ Not Bootloader Screen With Ver Numbers And Spl/.... Only Tricolor With No Writing!!! I Have Attatched Alex's Thumbnails, As It Is Exactly What Mine Is Doing... (hope Thats Ok Bairda (Alex!))
Also, Just Note That I Am Running Vista Home Premium, With All The Latest Updates/service Packs...
Please See Pics And I Would Appreciate A Minute Of Anyones Time To Get This Thing Going... Also, I Would Of Course Be Willing To Make A Donation Of What Ever I Can Scrounge Up For Some Assistance On This Issue!
Thanks So Much!!!
Attached Images
OK EVERYONE, MY PROBLEM IS RESOLVED, BUT I WANTED TO POST EXACTLY WHAT HAPPENED FOR EVERYONE TO SEE, ESPECIALLY FOR NEW FOLKS... AFTER HAVING THE ISSUES ABOVE, I CONSULTED WITH MANY PEOPLE TO TRY MANY, MANY METHODS OF RECOVERING THE DEVICE. ALL ATTEMPTS TO RECOVER WERE UNSUCCESSFUL, AS IT APPEARS THAT I USED THE INCORRECT UNLOCKER!!!
BASICALLY, THE UNLOCKER THAT I USED IS THE OLDER ONE, THAT SHOULD NEVER BE USED ANYMORE! AFTER THE SPL WAS ERASED, THE PROCESS ENCOUNTERED AN ERROR BEFORE IT WAS ABLE TO RE-FLASH THE NEW SPL. I HAPPENED TO CALL HTC AS A LAST RESORT, AN ONLY TOLD THEM THAT MY PHONE WOULD NOT TURN ON. I THEN SENT IT TO THEM, AND THEY TOLD ME THAT EVEN THOUGH I PURCHASED THE DEVICE USED, IT IS STILL UNDER WARRANTY DURING THE APPLICABLE DATES (WHICH IS 15 MONTHS FROM DATE OF MFG).
SO IN SHORT, THEY REPLACED MY MOTHERBOARD, AS THEY FLASH MEMORY CHIP WAS UNABLE TO BE RE-FLASHED. LUCKLIY, I WAS ABLE TO GET MY DEVICE REPLACED AT NO COST, BUT THIS MISTAKE COULD COST SOMEONE A $1000 DEVICE!!!
AS A RECAP, I AM LISTING A LINK TO THE GOOD ADVANTAGE X7501 UNLOCKER, AND A LINK TO THE OLD ONE, WHICH SHOULD NOT BE USED FOR THE X7501, IN MY EXPERIENCE... IT WAS ALSO CONFIRMED BY A REPUTABLE SENIOR MEMBER THAT THE OLD/BAD UNLOCKER SHOULD NOT BE USED AS WELL.
-GOOD/SAFE X7501 UNLOCKER: (FILE CALLED ATHENAWRAPPER, IN FIRST POST): http://forum.xda-developers.com/showthread.php?t=316846
-BAD/OLD X7501 UNLOCKER, READ 1ST POST: http://forum.xda-developers.com/showthread.php?t=315831
HOPE THIS INFORMATION IS USEFUL FOR EVERYONE! IF ANY OF THIS IS INCORRECT, PLEASE FEEL FREE TO COMMENT, BUT THIS IS WHAT MY EXPERIENCE LED TO.
__________________
HTC ADVANTAGE X7501 AT&T TILT 8925 VERIZON XV6700
sabes143
14th March 2008, 03:10 PM
HEY ALL,
I AM A FAIRLY EXPERIENCED USER WITH WM DEVICES, IN FACT I HAVE PUT TOGETHER SOME DECENT ROMS FOR THE KAISER, BUT I AM PRETTY NEW TO THE ADVANTAGE AS I JUST PICKED ONE UP LAST WEEK. PLEASE EXCUSE MY IGNORANCE IN THIS ISSUE, AS IT SEEMS JUST AN ISSUE OF ME MAKING AN EXTREMELY "ROOKIE" MISTAKE.
I HAVE READ, READ, READ AND READ SOME MORE, AS ONE SHOULD ALWAYS DO, BUT SOME HOW I GOT MYSELF INTO SOME TROUBLE WHILE RUNNING THE ATHENA UNLOCKER ON MY ADVANTAGE X7501... BIG TROUBLE...
I RAN THE UNLOCKER, AND FELT PRETTY COMFORTABLE WITH THE PROCESS, BUT WHILE THE UNLOCKER WAS RUNNING, AFTER IT ALLOOWED ME TO BACK UP MY SPL, IT WAS RUNNING SCRIPTS AS USUAL, AND I RECIVED AN UNUSUAL WINDOWS ERROR WITH THE UNLOCKER APP (PROGRAMS HAS EXPERIENCED ABNORMAL ACTIVITY OR SOMETHING TO THAT EFFECT...) THEN GAVE ME THE OPTION TO CONTINUE OR QUIT, SO I CHOSE CONTINUE, BUT THE DEVICE DID NOTHING MORE AND THE UNLOCKER BASICALLY FROZE. THE PC WAS "OK", AS FAR AS NOT BEING FROZE UP, BUT THE UNLOCKER WOULD NOT MOVE ANOTHER STEP! AFTER WAITING NEARLY AN HOUR, I DECIDED TO DISCONNECT (BAD IDEA, I SHOULD HAVE KNOWN BETTER, I REALIZE THIS PROBLEM IS BY ALL MEANS MY OWN FAULT!).
AFTER DISCNNECT, DEVICE APPEARED FINE UNTIL FIRST SOFT RESET, THEN I GOT NO BOOT, NO BOOTLOADER WITH ANY KEY COMBINATION, AND NOTHING ELSE. I CAN GET DEVICE TO WHAT WOULD NORMALLY BE THE STANDARD BL SCREEN, BUT NO OLIPRO SPL, NO WRITING AT ALL, AND NO SERIAL OR USB WHEN CONNECTED OR DISCONNECTED FROM PC! ALL I HAVE IS TRI-COLOR SCREEN WITH NO WRITING, REGARDLESS OF KEY/RESET COMBINATIONS THAT I HAVE TRIED, WHICH I BELIEVE ARE ALL OF THEM!
I AM OUT OF OPTIONS, I WAS HOPING SOME OF MY FELLOW XDA FOLKS COULD HELP AN "IDIOT" IN NEED! I WOULD CERTAINLY APPRECIATE IT ! :o
ALSO I WOULD GLADLY PROVIDE ANY MORE INFO IF NEEDED FOR FURHTER ADVICE. THANKS IN ADVANCE.
SORRY FOR LONG POST, JUST TRYING TO PROVIDE AS MUCH INFO AS POSSIBLE...
Hi
You could try Hard Reset BY Volume down+Stylus reset. if it turns on and load OS then you can use the unlocker again without Sim and Memory card(but your pc must have netframe work 2.0 installed and updated). If your device failed to load OS then you have to find the original rom for your device (which you can download from this website "use the search function") then unlock your device with olipro's latest unlocker.
Good luck
lakeman
14th March 2008, 04:18 PM
I got this once when I tried to flash from the memory card.
Remove both memory and sim card and battery for 10 mins.
make sure you are disconnected from the puter.
put battery in and hold the camerabutton all the way in and press the reset pin and hopefully you will enter the bootloader proper.
Which version of olipros unlocker did you use
Try to use the last version as it is less prone to trouble and works better on x7501
see this post as well(though not exactly your problem)
http://forum.xda-developers.com/showthread.php?t=374734
I would also recommend flashing from an xppro machine with the latest activesync
just reinforcing above post as well
bairda
14th March 2008, 05:30 PM
I had a similar problem which I outlined here...
http://forum.xda-developers.com/showthread.php?t=368312
Notice the screenshots about a third of the way down.
Does your Advantage bootscreen look like this?
-Alex-
cmonex
14th March 2008, 06:46 PM
try inserting an SD card and boot to this strange bootloader screen
does it say Loading (then No image found)?
also, i assume you mean the PC does not see the device either?
what athena version have you all got? x7501? brand new? maybe HTC changed something about them...
THEQUARTZGUY
14th March 2008, 07:48 PM
Hey All,
Thanks For All Of Your Helpful Advice, Unfortunately, I Think Im In A Little Deeper Than That
Bairda (Alex), I Looked At Your Screen Shots From Your Post, And Yea!!! That Is Exactly What My Device Looks Like!!! I Can Load The Bootloader, But Tricolor Only!!!! No Letters/ Version Numbers/ Anything!!!! I Really Dont Know What Else To Try, As I Know How To Flash A Rom From The Storage Card, But I Cannot Even Get The Bootloader To Load Properly!!! Any Advice Bairda (Alex)- Or Anyone Else?
Again, Got Disconnected After Having Issue With 3 Step Unlocker, After 1st Soft Reset, No Boot/ No Os/ Not Bootloader Screen With Ver Numbers And Spl/.... Only Tricolor With No Writing!!! I Have Attatched Alex's Thumbnails, As It Is Exactly What Mine Is Doing... (hope Thats Ok Bairda (Alex)!)
Also, Just Note That I Am Running Vista Home Premium, With All The Latest Updates/service Packs...
Please See Pics And I Would Appreciate A Minute Of Anyones Time To Get This Thing Going... Also, I Would Of Course Be Willing To Make A Donation Of What Ever I Can Scrounge Up For Some Assistance On This Issue!
Thanks So Much!!!
PLEASE FEEL FREE TO PM IF YOU HAVE ANY INFO AT ALL THAT COULD HELP A GUY OUT! THX!
cmonex
14th March 2008, 08:11 PM
if it can't load an image from SD and PC (with XP) can't see the device, then it needs to be sent back, if possible under warranty
ahmed45
14th March 2008, 09:15 PM
hay there first time some thing like that happen to me i was stuck for hours but then i got into boot loader in flashed the pk 3.0 and it worked so if u can see the olipro 1.20 thing then its all good and if u cant then mabee ur f***d that type of error u got its supose to cum near the end:(
bairda
15th March 2008, 01:37 AM
Hey All,
Thanks For All Of Your Helpful Advice, Unfortunately, I Think Im In A Little Deeper Than That
Bairda (Alex), I Looked At Your Screen Shots From Your Post, And Yea!!! That Is Exactly What My Device Looks Like!!! I Can Load The Bootloader, But Tricolor Only!!!! No Letters/ Version Numbers/ Anything!!!! I Really Dont Know What Else To Try, As I Know How To Flash A Rom From The Storage Card, But I Cannot Even Get The Bootloader To Load Properly!!! Any Advice Bairda (Alex)- Or Anyone Else?
Again, Got Disconnected After Having Issue With 3 Step Unlocker, After 1st Soft Reset, No Boot/ No Os/ Not Bootloader Screen With Ver Numbers And Spl/.... Only Tricolor With No Writing!!! I Have Attatched Alex's Thumbnails, As It Is Exactly What Mine Is Doing... (hope Thats Ok Bairda (Alex)!)
Also, Just Note That I Am Running Vista Home Premium, With All The Latest Updates/service Packs...
Please See Pics And I Would Appreciate A Minute Of Anyones Time To Get This Thing Going... Also, I Would Of Course Be Willing To Make A Donation Of What Ever I Can Scrounge Up For Some Assistance On This Issue!
Thanks So Much!!!
PLEASE FEEL FREE TO PM ME OR EMAIL ME AT ryanbentzler@live.com IF YOU HAVE ANY INFO AT ALL THAT COULD HELP A GUY OUT! THX!
Sorry that you are having the same problems that I did. Unfortunately, I can't bring you much comfort as I tried everything that I could find or was suggested. I searched every post and put out multiple cross-postings (that is a real sign of desperation for me!). Ultimately I had to get a new unit from Amazon as I could NOT get it back from the land of rainbow death that you see in the pics. I am no expert with the Athena/Advantage but I am also pretty experienced with computers and rarely ever get myself into a no-win like this. It takes alot for me to give up and declare a piece of equipment beyond my ability to fix, but this was one of those times.
I think that I traced the eventual cause to one (or a combination) of the following:
- Leaving the SIM and the Mini SD in the unit during the flash process
- Some glitch when using vista with the bootloader
- Using an older version of the OliPro unlocker (very likely the cause)
- Somehow panicing during the unlock and interupting the upgrade. You MUST do all three steps of the unlock to be safe.
I repeated the unlock with replacement unit being careful to use the latest bulletproof unlock and had no problems. But the original unit did have to go back.
I sincerely hope that you have better luck! Tell me how it turns out! If there is any other info you think you might be able to use from my experience, please ask away!
-Alex-
cmonex
15th March 2008, 06:28 AM
You MUST do all three steps of the unlock to be safe.
nope, the second and third steps are only for sim unlocking
marthynovak
15th March 2008, 09:41 AM
But if you what to uprage a new Radio you have to do a SIM unlock?
bairda
15th March 2008, 04:54 PM
nope, the second and third steps are only for sim unlocking
I stand corrected.
I would caution though, that for new users it would be best to follow the procedure through all 3 steps. As I understand it there is no harm in doing this other than the increase cost in time and effort and may be less confusing and safer then just doing the first.
Is this correct?
-Alex-
cmonex
17th March 2008, 04:30 AM
But if you what to uprage a new Radio you have to do a SIM unlock?
nope, it's got nothing to do with the radio version
it's another area where simunlock info is stored
cmonex
17th March 2008, 04:32 AM
I stand corrected.
I would caution though, that for new users it would be best to follow the procedure through all 3 steps. As I understand it there is no harm in doing this other than the increase cost in time and effort and may be less confusing and safer then just doing the first.
Is this correct?
-Alex-
well it can't do much harm, of course less flashing means less risk, and step 2 and step 3 both flash a radio.
as a newbie i'd imagine it's easier to just do step 1 because step 2 can cause corruption to the OS so it needs to be reflashed and the black screen scares the newbies etc.
marek101
17th March 2008, 03:31 PM
What I have noticed reading this board too is that sometimes the type of USB cables used matters. I do not know why, but this happened to me too. I failed at step #2 and couldn't figure it our why. To resolve this I changed everything. From computer to usb cables to fresh files, to restore old image and re-tried the process and it worked.
Also one thing I noticed is that the old unlocked is linked allot instead of the new unlocker which is almost bullet proof. Some folks did download the old unlocker and tried it on their x7501 and bricked their device....
Palonek's Business Management Systems and development http://www.edward-palonek.com/
THEQUARTZGUY
30th March 2008, 12:08 PM
OK EVERYONE, MY PROBLEM IS RESOLVED, BUT I WANTED TO POST EXACTLY WHAT HAPPENED FOR EVERYONE TO SEE, ESPECIALLY FOR NEW FOLKS... AFTER HAVING THE ISSUES ABOVE, I CONSULTED WITH MANY PEOPLE TO TRY MANY, MANY METHODS OF RECOVERING THE DEVICE. ALL ATTEMPTS TO RECOVER WERE UNSUCCESSFUL, AS IT APPEARS THAT I USED THE INCORRECT UNLOCKER!!!
BASICALLY, THE UNLOCKER THAT I USED IS THE OLDER ONE, THAT SHOULD NEVER BE USED ANYMORE! AFTER THE SPL WAS ERASED, THE PROCESS ENCOUNTERED AN ERROR BEFORE IT WAS ABLE TO RE-FLASH THE NEW SPL. I HAPPENED TO CALL HTC AS A LAST RESORT, AN ONLY TOLD THEM THAT MY PHONE WOULD NOT TURN ON. I THEN SENT IT TO THEM, AND THEY TOLD ME THAT EVEN THOUGH I PURCHASED THE DEVICE USED, IT IS STILL UNDER WARRANTY DURING THE APPLICABLE DATES (WHICH IS 15 MONTHS FROM DATE OF MFG).
SO IN SHORT, THEY REPLACED MY MOTHERBOARD, AS THEY FLASH MEMORY CHIP WAS UNABLE TO BE RE-FLASHED. LUCKLIY, I WAS ABLE TO GET MY DEVICE REPLACED AT NO COST, BUT THIS MISTAKE COULD COST SOMEONE A $1000 DEVICE!!!
AS A RECAP, I AM LISTING A LINK TO THE GOOD ADVANTAGE X7501 UNLOCKER, AND A LINK TO THE OLD ONE, WHICH SHOULD NOT BE USED FOR THE X7501, IN MY EXPERIENCE... IT WAS ALSO CONFIRMED BY A REPUTABLE SENIOR MEMBER THAT THE OLD/BAD UNLOCKER SHOULD NOT BE USED AS WELL.
-GOOD/SAFE X7501 UNLOCKER: (FILE CALLED ATHENAWRAPPER, IN FIRST POST): http://forum.xda-developers.com/showthread.php?t=316846
-BAD/OLD X7501 UNLOCKER, READ 1ST POST: http://forum.xda-developers.com/showthread.php?t=315831
HOPE THIS INFORMATION IS USEFUL FOR EVERYONE! IF ANY OF THIS IS INCORRECT, PLEASE FEEL FREE TO COMMENT, BUT THIS IS WHAT MY EXPERIENCE LED TO.
dodonian
2nd April 2008, 04:15 PM
OK EVERYONE, MY PROBLEM IS RESOLVED, BUT I WANTED TO POST EXACTLY WHAT HAPPENED FOR EVERYONE TO SEE, ESPECIALLY FOR NEW FOLKS... AFTER HAVING THE ISSUES ABOVE, I CONSULTED WITH MANY PEOPLE TO TRY MANY, MANY METHODS OF RECOVERING THE DEVICE. ALL ATTEMPTS TO RECOVER WERE UNSUCCESSFUL, AS IT APPEARS THAT I USED THE INCORRECT UNLOCKER!!!
BASICALLY, THE UNLOCKER THAT I USED IS THE OLDER ONE, THAT SHOULD NEVER BE USED ANYMORE! AFTER THE SPL WAS ERASED, THE PROCESS ENCOUNTERED AN ERROR BEFORE IT WAS ABLE TO RE-FLASH THE NEW SPL. I HAPPENED TO CALL HTC AS A LAST RESORT, AN ONLY TOLD THEM THAT MY PHONE WOULD NOT TURN ON. I THEN SENT IT TO THEM, AND THEY TOLD ME THAT EVEN THOUGH I PURCHASED THE DEVICE USED, IT IS STILL UNDER WARRANTY DURING THE APPLICABLE DATES (WHICH IS 15 MONTHS FROM DATE OF MFG).
SO IN SHORT, THEY REPLACED MY MOTHERBOARD, AS THEY FLASH MEMORY CHIP WAS UNABLE TO BE RE-FLASHED. LUCKLIY, I WAS ABLE TO GET MY DEVICE REPLACED AT NO COST, BUT THIS MISTAKE COULD COST SOMEONE A $1000 DEVICE!!!
AS A RECAP, I AM LISTING A LINK TO THE GOOD ADVANTAGE X7501 UNLOCKER, AND A LINK TO THE OLD ONE, WHICH SHOULD NOT BE USED FOR THE X7501, IN MY EXPERIENCE... IT WAS ALSO CONFIRMED BY A REPUTABLE SENIOR MEMBER THAT THE OLD/BAD UNLOCKER SHOULD NOT BE USED AS WELL.
-GOOD/SAFE X7501 UNLOCKER: (FILE CALLED ATHENAWRAPPER, IN FIRST POST): http://forum.xda-developers.com/showthread.php?t=316846
-BAD/OLD X7501 UNLOCKER, READ 1ST POST: http://forum.xda-developers.com/showthread.php?t=315831
HOPE THIS INFORMATION IS USEFUL FOR EVERYONE! IF ANY OF THIS IS INCORRECT, PLEASE FEEL FREE TO COMMENT, BUT THIS IS WHAT MY EXPERIENCE LED TO.
Hi there,
Thanks indeed for the important info. I haven't yet tried the unlocker. But to my understanding the link " -BAD/OLD X7501 UNLOCKER, READ 1ST POST: http://forum.xda-developers.com/showthread.php?t=315831"
points to the latest version of the unlocker. The file I have downloaded is dated in November 2007. This is not correct? And what does the wrapper mean?
Could you please explain? I bought my X7501 in the US, but live in Europe and such a mistake could be totally fatal!
Thanks for your feedback.
THEQUARTZGUY
3rd April 2008, 04:37 AM
Hey Dodonian / Everyone,
Yea, I Agree That It Is Somewhat Confusing About The "latest" Unlocker Version, But While Dealing With The Issues I Have Had Lately, I Spoke With Olipro, Who Makes The Unlocker, And When I Sent Him The Link That I Labeled Bad In The Last Post, He Replied That It Appeared I Had Tried The Older One, And That The Link To The Other One Labeled "good" Was Infact The Best One.
I Could, I Guess, In Some Way Be Mislead Here, But Just For Your Info, I Did Just Receive My Fixed Advantage X7501 Today, And Immediately Ran The "athena_wrapper" Which Is Availible On The "good" Link That I Posted. It Ran Good And Flashed Directly From The Bootloader. Afterwards, I Was Able To Flash My Own Custom Rom With No Difficulty, And All Went Well.
Hope This Answers Your Question!
---ryan
dodonian
3rd April 2008, 11:46 AM
Hey Dodonian / Everyone,
Yea, I Agree That It Is Somewhat Confusing About The "latest" Unlocker Version, But While Dealing With The Issues I Have Had Lately, I Spoke With Olipro, Who Makes The Unlocker, And When I Sent Him The Link That I Labeled Bad In The Last Post, He Replied That It Appeared I Had Tried The Older One, And That The Link To The Other One Labeled "good" Was Infact The Best One.
I Could, I Guess, In Some Way Be Mislead Here, But Just For Your Info, I Did Just Receive My Fixed Advantage X7501 Today, And Immediately Ran The "athena_wrapper" Which Is Availible On The "good" Link That I Posted. It Ran Good And Flashed Directly From The Bootloader. Afterwards, I Was Able To Flash My Own Custom Rom With No Difficulty, And All Went Well.
Hope This Answers Your Question!
---ryan
Thanks Ryan!
I see. I know that the X7501 is sold unlocked in the US and therefore only the 1st step of flashing the SPL would make sense. That means that if run the athena wrapper, all will be OK for flashing radio, ROM etc. I that correct?
Two more questions, if you don't mind.
1.Did you need to install .NET to run the Athena wrapper?, or is it kind of pre-installed mostly?
2.What is your experience with the cooked ROMs? Running stable? Can you flash back the original ROM if required?
Thanks
Dod.
techntrek
4th April 2008, 01:48 AM
I ran the 'wrapper' this week, step 1 only, so I could upgrade the radio driver. I first ran the bad unlocker and got the 'black screen of death', but after reflashing a good ROM, then the good 'wraapper', then the latest radio all is well.
THEQUARTZGUY
6th April 2008, 09:09 PM
Hey Dod/tech/all,
Yes Dod, That Is Correct, As Tech Noted, You Only Need The Wrapper (or Step 1 Of Old Unlocker, Which Is Really For X7500, I Believe). As Stated, The X7501 Comes Cid Unlocked, So You Only Need The "wrapper" To Unlock The Rom/radio For Flashing.
Dod's Other Answers To Best Of My Knowledge:
1. No, As Far As I Know, You Do Not Need .net Framework Installed On Pc, As You Do In The "old Unlocker". Also, You Dont Need .net Cf On Yor Obile Device Either, As It Takes You To The Bootloader To Flash The Update Anyway.
2. Yes, I Have Found Some Of The Cooked Roms To Be Stable, And I Run My Own Cooked Rom That I Designed, And Works Works Well Also. And Yes, You Can, And I Have, Flashed Back To Your Oem Rom Quite Easily, And They Are Fairly Easily Located On Xda And Some Other Web Sites... I Would Probably Download Your Oem Rom Before Trying The Others, Imo.
This Info Is Based Off Of The Reading And Correspondance Of Other Xda Members And More So My Own Experiences. I Believe All To Be Accurate Or I Wouldnt Have Posted It, But Some May Have Had Other Eperiences? Take My Word On The Good "wrapper" Vs The "bad Unlocker" Though, As I Almost Guarantee That;).
Hope This Helps You All! Good Luck
dodonian
7th April 2008, 05:03 PM
Hey Dod/tech/all,
Yes Dod, That Is Correct, As Tech Noted, You Only Need The Wrapper (or Step 1 Of Old Unlocker, Which Is Really For X7500, I Believe). As Stated, The X7501 Comes Cid Unlocked, So You Only Need The "wrapper" To Unlock The Rom/radio For Flashing.
Dod's Other Answers To Best Of My Knowledge:
1. No, As Far As I Know, You Do Not Need .net Framework Installed On Pc, As You Do In The "old Unlocker". Also, You Dont Need .net Cf On Yor Obile Device Either, As It Takes You To The Bootloader To Flash The Update Anyway.
2. Yes, I Have Found Some Of The Cooked Roms To Be Stable, And I Run My Own Cooked Rom That I Designed, And Works Works Well Also. And Yes, You Can, And I Have, Flashed Back To Your Oem Rom Quite Easily, And They Are Fairly Easily Located On Xda And Some Other Web Sites... I Would Probably Download Your Oem Rom Before Trying The Others, Imo.
This Info Is Based Off Of The Reading And Correspondance Of Other Xda Members And More So My Own Experiences. I Believe All To Be Accurate Or I Wouldnt Have Posted It, But Some May Have Had Other Eperiences? Take My Word On The Good "wrapper" Vs The "bad Unlocker" Though, As I Almost Guarantee That;).
Hope This Helps You All! Good Luck
Thanks for your feedback! I have already downloaded the original ROM, so when I have some time I may give some try to the cooked ones. I admit however, that for me functionality and time (not lost) are very important. Reflashing and configuring can easily "cost" 1 full day of work :)
I will post some feedback soon I hope.
Cheers
Dod
Olipro
13th April 2008, 11:16 AM
1. No, As Far As I Know, You Do Not Need .net Framework Installed On Pc, As You Do In The "old Unlocker". Also, You Dont Need .net Cf On Yor Obile Device Either, As It Takes You To The Bootloader To Flash The Update Anyway.
Wrong, you do.
Take My Word On The Good "wrapper" Vs The "bad Unlocker" Though, As I Almost Guarantee That;).
There is no "bad unlocker" except for some mirror link that goes to an old version, if you click the link provided in my post (i.e. post #1) then it's absolutely fine
THEQUARTZGUY
9th May 2008, 03:38 PM
OK OLIPRO,
THANKS FOR THE CORRECTION, I HAD EVIDENTLY GOT AHOLD OF AN OLDER UNLOCKER, WHICH CAUSED SOME PROBLEMS... AT ANY RATE, I TRUST WHAT YOU SAY, SO THANKS FOR MAKING THIS INFO CORRECT!:o
HOPE THAT THIS POST HELPS SOMEONE!
Confucious
9th May 2008, 04:37 PM
Do you have to SHOUT all the time?
NeilM
10th May 2008, 07:00 PM
Do you have to SHOUT all the time?
Better than the Stage Whispers in the earlier posts :)
Confucious
10th May 2008, 11:47 PM
And what's wrong with Stage Whispers?
:cool:
NeilM
12th May 2008, 09:00 PM
Must Be My Age But I Find It Very Hard To Follow A Line Of Thought When Every Initial Letter Is Capitalised :) Must Take Longer To Type As Well !
THEQUARTZGUY
15th May 2008, 02:02 AM
SORRY ALL,
I JUST HAVE A HABIT OF CAPITALIZING ALL OF MY LETTERS.... I HAVE GOTTEN SO USED TO IT THAT I ALMOST FIND IT HARDER TO READ IN LOWER CASE! SO, SORRY BOUT THE SHOUTING!:eek:
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.